ACADEMIC QUALIFICATIONS:

Transcription

1 CURRICULUM VITAE Full Name Raafat Elsayed Shaker Ismail Phone Number Fax and Address Beirut Arab University-Tripoli Branch- Corniche El-Mina Major Analysis and Mechanics of structures Office Location Block-D-3 rd floor-d312 Current Position Assoc. Prof. ACADEMIC QUALIFICATIONS: First University Degree: Name of Degree: B.SC. June 1982 (very good with degree of honor)- Faculty: Engineering Name and location of University:, Alex., Egypt Specialization: Civil Engineering Second University Degree Name of Degree: M.Sc. Date degree awarded: November 1988 Faculty: Engineering Name and location of University:, Alex., Egypt Specialization: Structural Engineering-Concrete structure (finite element method) Title of Thesis: Investigation of Stresses and Deflections in Doubly Curved Shells. Third University Degree Name of Degree: Ph.D. in Engineering Date degree awarded: March 1995 Faculty: Engineering Name and location of University: Osaka Univ., Osaka, Japan Specialization: Structural Engineering Steel structure (Non-Linear Cyclic Finite Element Analysis) Title of Thesis: Numerical Investigations into Performance of Thin Walled Structural Members under Cyclic Loads 1

2 Other Certificate obtained or advanced courses attended: Qualifying Courses in Mathematics, Alexandria Univ., Egypt. ( ) AWARDS High Grades Award, Alexandria University, Egypt, 1977, MONBOSHU scholarship, Osaka university-japan, EMPLOYMENT HISTORY Institution (place of work) Period From To Job Title (Academic Rank) Demonstrator " Nature of Work (, research, administrat ion and research Type of Work Full time Assistant Lecturer and research Full time Osaka Univ Scholarship Full time and research Lecturer Full time Air Defense Lecturer Part time College Associate Prof. Full time Air Defense College Beirut Arab Univ. Specialized Scientific Program (SSP) Pharos Univ. construction Engineering and Management Department Associate Prof. Part time 2005 Sept 21 For 6 weeks Visiting Prof. " Course Coordinator of MP105:"Engineering Graphics" CM 103: Introduction to CAD systems Visiting Professor Part time 2

3 Pharos Univ. Basic science Department Beirut Arab Univ.(BAU) BE 141: Engineering Drawing & Descriptive Geometry(1) 2- BE 142:Engineering Drawing & Descriptive Geometry(2) Till NOW 1-Math281:Linear Algebra 2-MCHE201: Eng. Drawing and Graphics 3-MCHE213: Eng. Mech. - Dynamics 4-CVLE270: Civil Eng. Drawing and detailing 5-EMPH142: Eng. Drawing II 6-Final year Projects 7- CVLE631: Elastic plastic analysis of structures 8- CVLE713: Nonlinear analysis of structures Part time Fulltime POST GRADUATE COURSES Institution Period Course Title Finite Element Analysis Elastic plastic stress analysis Beirut Arab Univ.(BAU) 2015 CVLE628:Computer analysis of structures (using ABAQUS software) 1- Holding more than thirty training courses on using SAP 2000 AND ADVANCED SAP 2000 at Arab Academy for Science, Technology and Maritime Transport, summer 2007 till Holding SAP 2000 training course at Beirut Arab University-spring Holding a summer full training course in AutoCAD 2000 at Alex univ., faculty of Engineering. July, SUPERVISION OF THESES AND DISSERTATIONS Title of theses or dissertation Effect of stress breaking feaures incorporeted in tooth-implant supported porsthess-clinucal and 3D finite element stress analysis study Analysis of multi layers composite beams Degree granted for theses or dissertation Ph.D. Degree M.Sc. Degree University conferring the degree Faculty of Dentistry 3 Date March, 2005 May, 2005

4 Numerical Investigation on the Performance of Stiffened Box Steel Bridge Piers Under Strong Earthquake Behavior of Stub-Girder Floor System Response Control System for suspended Bridges Using Magnetorheological Dampers Protection of Alexandria coastline from sea level rise Behavior of composite castellated beams under verticals loads Ph.D. Degree M.Sc. Degree Ph.D. Degree M.Sc. Degree M.Sc. Degree Alex. Univ November, 2010 December, 2009 presented on April, 2013 December, 2012 July, 2013 COMPUTER SKILLS and PROGRAMMING 1) Developing the following Finite Element Programs: a) CYNAPSS1 : CYclic Non-linear Analysis of Plates and Shell Structures. b) CYNAT1 : CYclic Non-linear Analysis of Tubes. c) FEBAPS: Finite Element Bifurcation Analysis of Plates and Shells. d) DYNAPSS: Dynamic Non-linear Analysis of Plates and Shells Structures. e) DYNAFLOAT: Dynamic analysis of flexible floating structures. The program is based on boundary element-finite element combination method. f) SABS: Static Analysis of 3d Beamed-Slab structures to design floor system, raft foundation and raft rested on piles. The program reads and writes an AutoCAD ( DXF file) as full input data and output results g) PZA: The program is based on Plastic Zone Analysis which is capable to carry out an inelastic analysis of multi-layer composite beam (composite beam and stub girder) 2) Finite element Software: SAP2000- ETABS-SAFE-STADPRO-STRAND 7-COSMOS- ANSYS-ABAQUS 3) Excel design sheets: Developed Excel design sheets for concrete structural members and foundation based on both working and ultimate states 4) Other software Fortran- Matlab -Maple - Graf4win- Microsoft office,.,..etc.. SCIENTIFIC ACTIVITIES 1- Published many technical papers in international and national journals and conferences. The papers involved different aspects of research in Analysis and Mechanical of structures. 4

5 2- Participation and presenting two papers in Al-Azhar Engineering Fifth International Conference,, Al-Azhar Univ., Cairo Egypt, December 19-22, (1997) 3- Participation and presenting two papers in Al-Azhar Engineering Sixth International Conference, September 1-4, (2000). 4- Participation and presenting two papers in 29 th Annual Conference of Canadian Society for Civil Engineering, Victoria, British Columbia, May 30-June 2, Participation and presenting two papers in Al-Azhar Engineering Eighth International Conference, December 24-27, Participation and presenting two papers in the sixth Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 6), April 15-17, Participation and presenting two papers in the seventh Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 7), December 27-29, Participation and presenting one paper in The International Maritime Transport and Logistics Conference A Vision For Future Integration", December 18-20, Participation and presenting two papers in the eighth Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 8), April 14-16, Lecture notes of Engineering Drawing & graphics - Linear Algebra - Engineering Mechanics dynamics-civil drawing and detailing 11- Supervision of three Master of Science thesis in analysis and mechanical of structures. 12- Examiner of one Master of Science thesis in analysis and mechanical of structures. 13- Supervision of two Ph.D. thesis in analysis and mechanical of structures. 14- Examiner of one Ph.D. thesis in analysis and mechanical of structures. CONSULTING EXPERIENCES SABS: Static Analysis of 3d Beamed-Slab structures to design floor system, raft foundation, and raft rested on piles. The program reads and writes an AutoCAD ( DXF file) as input data and output results. The program is used in designing many buildings in Egypt. I worked as a part time Structure Design Engineer and Consultant Structural Engineer as follows: March 2006-January 2008 Head of the Structural Sector in Al-AQSA Engineering Consultancy (Q.E.C.), Alexandria Branch. I supervised many different engineering projects constructed in QATAR. LIST OF PUBLICATIONS A: Journal Puplications 1) Yukio Ueda, Hidekazu Murakawa and Raafat El-Sayed Shaker, Mechanical Properties of Tubular Members Under Cyclic Axial Loads, JSCE, Journal of Structural Engineering, Vol. 39 A, pp (March, 1993). 2) Raafat El-Sayed Shaker, Hidekazu Murakawa and Yukio Ueda, Effect of Local Buckling and Work-Hardening Properties of Steel Material on the Behavior of I-Beam subjected to Lateral Cyclic Load, JSCE, Journal of Structural Engineering, Vol. 40 A, pp (March, 1994). 3) Raafat E. S. Ismail and Hesham Ali Zien El Din Effect of Plasticity Models on The Prediction of Cyclic Behavior of Braces, Alexandria Engineering Journal, Vol. 37, No. 2, pp. C37-C45 (March, 1998) 5

6 4) Raafat E. S. Ismail Coupled Free Vibration Analysis of Module-linked Floating Structures using FE-BE Combination Method, Alexandria Engineering Journal, Vol. 37, No. 4, pp. C75-C84 (July, 1998) 5) Raafat E. S. Ismail and Hesham Ali Zien El Din Effect of the First Local Buckling Mode on the Behavior of Steel I-section Beam-Columns, Alexandria Engineering Journal. Vol. 39, No. 6, (November, 2000) 6) El-Sayed Mashaly, Hesham ZienEldin, Mohamed El-Heweity, Raafat.E.S. Ismail and Howida Ismai, " Behavior of Stub Girder Floor System With Partial Shear Connection", Alexandria Engineering Journal, (2010) 49, ) Mohamad El-Katt, Raafat Shaker and Younis Kassem Optimum Control System for Seismic and Aerodynamic Flutter Response of Cable-Stayed Bridge Using Magnetorheological Dampers, Advanced Materials Research, Vols (2011), pp ) Mohamad El-Katt, Raafat Shaker and Younis Kassem Analytical Modeling of Flutter Aerodynamic Derivatives for Open-Truss Stiffened Suspension Bridge Advanced Materials Research, Vols (2011), pp ) Raafat E. S. Ismail, Fahmy A. Fathelbaba, Hesham A. Zien Eldinb and Sameh I. Zenhom Numerical Investigations On Dynamic Performance Of Stiffened Box Steel Bridge Piers, International Journal for Steel Structures, Springer, June 2012, Vol. 12, No 2, , (Most downloaded paper) 10) Raafat E. S. Ismail, M.T.H. El-Katt, H.A. Zien El-Din And Y.M.Y. Kasem Analytical modeling of nonlinear behavior of composite stub-girders, International Journal for Steel Structures, Springer, December 2012, Vol. 12, No 4, ) R. E. S. Ismail, A.S. Fahmy, A. M. Khalifa And Y. M. Mohamed. Behavior Of End-Plate Steel Connections Stiffened with Stiffeners Of Different Geometrical Dimension Global Advanced Research Journal(GARJ), Volume 3/ Issue 3/ P.P ) R. E. S. Ismail, A.S. FAHMY and N. M. Tawfik Ultimate Behavior of Composite Castellated Beams under Vertical Loads, International Journal of Computer Applications, Volume 108 No. 5, December, 2014, pp ) R. E. S. Ismail, A.S. FAHMY and N. M. Tawfik Finite Element Modeling of Partially Composite Castellated Beams, Communications on Applied Electronics (CAE),Foundation of Computer Science FCS, New York, USA Volume 2 No.3, June 2015, pp R. E. S. Ismail, A.S. Fahm, A. M. Khalifa And Y. M. Mohamed. Numerical Study On Ultimate Behavior Of Bolted End-Plate Steel Connections, Latin American Journal of Solids and Structures,13 (2016), ) R. E. S. Ismail Time-Domain Three Dimensional BE-FE Method for Transient Response of Floating Structures under Unsteady Loads. Latin American Journal for Solids and Structures. (accepted, March, 15, 2016) B: Conference Puplications 1) Mahmoud A. Helmy, Ibrahim E. Korish, Ezz-El-Din R. F. Zaghlool, and Raafat E. Shaker, Investigations of Stresses and Deflections in Elliptic-Paraboloid Shells, First International Conference on Structural Engineering of Ain Shams University. May, 16 th to 18 th, ) Yukio Ueda, Hidekazu Murakawa and Raafat El-Sayed Shaker, Effect of Local Buckling on Hysteretic Behavior of Beam-Column with Circular Cross Section, The Fourth International Offshore and Polar Engineering Conference, (ISOPE), Osaka, Japan, pp , April, 10-15, (1994) 3) Raafat E. Shaker, Hidekazu Murakawa and Yukio Ueda, Effect of Local Buckling and Work-Hardening Properties of the Material on the Hysteretic Behavior of Cantilever I- Beam Subjected to Lateral Cyclic Load, Special Offshore Symposium China (SOSC-94), Beijing, pp , April, 16-18, (1994). 6

7 4) Raafat E. Shaker, Hidekazu Murakawa and Yukio Ueda, Hysteretic Behavior of Beam- Column Tubular Member, The Third World Congress on Computational Mechanics, Chiba, Japan, pp , August, 1-5, ) Raafat El-Sayed Shaker, Hidekazu Murakawa and Yukio Ueda, Effect of Mechanical Properties of steel on Behavior of Cantilever I-girder under Cyclic Loading, Extended Abstract of the 38th Japan Congress on Material Research, pp , Kyoto, Japan, September, 12-13, (1994). 6) Raafat El-Sayed Shaker, Hidekazu Murakawa and Yukio Ueda, Effect of Mechanical Properties of steel on Behavior of Cantilever I-girder under Cyclic Loading, Proceeding of the Japan Congress on Material Research, pp , March, (1995). 7) Raafat E. Shaker, Hidekazu Murakawa and Youkio Ueda, Performance of Tubular Members Under Cyclic Axial Loads, Proceedings of the Fifth (1995) International Offshore and Polar Engineering Conference, The Hage, The Netherlands, pp , June 11-16, (1995). 8) Hesham Ali Zein El Din and Raafat E. Shaker, An improved Simplified Cyclic Analysis of Composite Members, Al-Azhar Engineering Fifth International Conference, pp , December 19-22, (1997). 9) Raafat E. S. Ismail and Ahmed M. Ellakany: Static Deflections of Floating Structures Using Transfer Matrix Method, Al-Azhar Engineering Fifth International Conference, pp , December, 19-22, (1997). 10) Raafat E. S. Ismail Cyclic Behavior of Rectangular Plates Under Bi-axial loading, Al- Azhar Engineering Sixth International Conference, pp , September, 1-4, (2000). 11) Raafat E. S. Ismail Dynamic Analysis of Flexible-Floating Structures Under Moving Loads Using FE-BE Method, Al-Azhar Engineering Sixth International Conference, pp , September, 1-4, (2000). 12) R. E. Ismail, K.M. Sennah, and J.B. Kennedy Cyclic Behavior of Cellular Structural Steel Components Under Combined Loading, 29th Annual Conference of Canadian Society for Civil Engineering, Victoria, British Columbia, May 30-June 2, 2001, A28. 13) R. E. Ismail, K.M. Sennah, and J.B. Kennedy Flexible-Floating Bridges: An Innovative Solution for waterfront Regeneration in Congested Cities, 29th Annual Conference of Canadian Society for Civil Engineering, Victoria, British Columbia, May 30-June 2, 2001, A29. 14) Ahmed M. Farag and Raafat E. S. Ismail Exact Closed Form For Deflection Surface Of Restrained Orthotropic Plate Via Computer Aided Algebraic Solution". Al-Azhar Engineering Eighth International Conference, P15, pp , December, 24-27, ) Raafat E. S. Ismail and Ahmed M. Farag "Transition Matrix-Boundary Element Combination Method For Coupled Free Vibration Analysis Of A Flexible Floating Structure". Al-Azhar Engineering Eighth International Conference, C150, pp , December 24-27, ) R.E.S. Ismail, M.T.H. El-Katt, H.A. Zien El-Deen, Y. M.Y. Kasem " Behavior Of Multi- Layer Composite Stub-Girder Part I: Inelastic Analytical Model", The sixth Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 6), pp , April, 15-17, ) R.E.S. Ismail, M.T.H. El-Katt, H.A. Zien El-Deen, Y. M.Y. Kasem " Behavior Of Multi- Layer Composite Stub-Girder Part II: Inelastic Finite Element Model", the sixth Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 6), pp , April, 15-17, ) Raafat El-Sayed Shaker Ismail, Fahmy Aly Fathelbab, Hesham Aly Zien Eldin, Sameh I. Zenhom." Determination of Damage Index Free Parameters for Box-section Steel Bridge Piers", The seventh Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 7), December, 27-29,

8 19) Raafat El-Sayed Shaker Ismail, Fahmy Aly Fathelbab, Hesham Aly Zien Eldin, Sameh I. Zenhom." Numerical Investigations on the Performance of Stiffened Box Steel Bridge Piers Under Strong Earthquake", the seventh Alexandria International Conference of Structural and Geotechnical Engineering (AICSGE 7), December, 27-29, ) Akram Soliman, Hossam Moghazy, Raafat Ismail and Rania Eid Evaluation of Two Numerical Models for the Design of Artificial Submerged Reef, The International Maritime Transport and Logistics Conference A Vision For Future Integration", December, 18-20, ) Raafat E. S. Ismail, Ahmed S. Fahmy, Ahmed M. Khalifa And Yosra M. Mohamed Behavior of end-plate steel connections stiffened with stiffeners of different geometrical dimensions, Alexandria International Conference of Structural and Geotechnical Engineering-(AICSGE 8),Alexandria, Egypt, from 14 to 16/April/2014, pp. MS34-MS52. 22) Ahmed M. Ellakany and Raafat E. S. Ismail, Transfer matrix-boundary element method for dynamic analysis of floating bridges due to two moving loads, Alexandria International Conference of Structural and Geotechnical Engineering-(AICSGE 8),Alexandria, Egypt, from 14 to 16/April/2014, pp.st 1-ST 15. MEMBERSHIPS 1- Member, Egyptian Engineering Syndicate, Egypt /profile/raafat_ismail Raafat E S Ismail 3- Google Scholar Citation. Raafat E. S. Ismail : CURRENT RESEARCH 1- Nonlinear Dynamic Finite element analysis of steel bridge pier under severe earthquakes. 2- Behavior of Composite Castellated Beams Under Vertical Loads 3- Numerical Study On Ultimate Behavior Of Bolted End-Plate Steel Connections 4- Three dimensional BE-FE method for transient response of floating structures under moving masses 5- Inelastic Finite Element modeling of Reinforced concrete structural members/joints. 8