SUBMITTAL No

Transcription

1 SUBMITTAL No Date: 12/17/15 P.O. Box Lake Monroe, FL Phone: (407) Fax: (407) Job #: Project: CranesRoostParkRehab-GC's Title: Benches, Bike Rack,Trash Receptacle Required Start: 12/17/15 Status: New Item Required Finish: 12/21/15 Package: Days Overdue: -4 Received From Sent To Forwarded To Wharton-Smith, Inc. Bentley Architects and Engineers Inc Wharton-Smith, Inc. Rev. Description/Remarks Received Sent Returned Forwarded Status Held Elapsed 001 Benches, Bike Rack and Trash Receptacles 12/17/15 12/17/15 NEW 0 0 CONTRACTOR REVIEW STAMP This review of shop drawings and/or product data is only for general conformation to the Contract Documents. Any markings and/or comments shall not be construed as a release from compliance with the Contract Documents, confirmation of fabrication, assembly and installation techniques, dimensional and detail accuracy, quantities, and safe performance of work. Departures from design intent are the sole responsibility of the Subcontractor and/or Vendor. ARCHITECT/ENGINEER REVIEW STAMP Submittal No.: Description: Specification: Drawing No.: WSI File No.: Benches, Bike Rack,Trash Receptacle Date: 12/17/15 By: Nelson Marty Submittal Page 1 of 1 F_3000_

2 The BENCH WITH BACK offers the distinctive grace that many settings require. Built with the quality craftmanship of a fully assembled metal unit, innovative engineering has given the Atlanta the freedom to curve and adapt to any surrounding. Patent no. des. 372,133 CUSTOM OPTIONS Color: custom KEYSHIELD powder coat Support: bury extension Materials: sustainable hardwood, stainless steel, recycled plastic Arms: center arms, additional arms, no arms Curves, reverse curves, angles Custom length ENHANCEMENTS Inquire about coordinating litter receptacles, ash urns, planters, tables, and other furnishings Cushions Pillows Cast bronze plaques Laser cuts Decals Nelson Marty - Project Engineer STANDARD FEATURES Color: exclusive KEYSHIELD polyester powder coating finish Support: bolt down or freestanding Fully assembled unit Continuous weld seams Three-year warranty Made in the USA AT26

3 BENCH WITH BACK Bench with back is covered by patent no. des. 372,133. Ash/ trash is covered by patent no. des. 459,563. All other Atlanta pieces are Exclusive By Design. KEYSHIELD METAL FINISH The trademarked KEYSHIELD finish protects each piece of furniture from chipping, cracking, and UVA damage while providing unparalleled corrosion resistance. Steel products are finished with a two-coat powder coating process applied to a 7-15 mil thickness. Substrate preparation includes sandblasting to a white finish to remove all surface contaminants. The raw product then receives a corrosion-inhibiting phosphate coating prior to the application of the powder coating. The first coat applied to the substrate is zinc rich epoxy powder primer used exclusively on sandblasted parts. The second coat is a colored polyester powder coating. Both coats are electrostatically applied and oven cured according to powder coating manufacturing specifications to create a smooth, satin-like finish and a lowemitting non-porous armor. FULLY ASSEMBLED UNIT The Atlanta bench with back is manufactured in the USA as a fully assembled unit to provide ultimate stability and avoid damage during transit to the site, saving time and money. MATERIALS Commercial-grade materials, at least 25% recycled raw steel, 100% recyclable steel; completely welded for optimum strength and stability according to Keystone Ridge Designs, Inc. CAD drawing; 1/8 x 1-1/2 square tubing frame with 1/8 x 1 x 2 rectangular tubing inset seat, ¼ x 2 back slats decorated with ¼ solid rings across top arch. LENGTH (A) WIDTH (B) HEIGHT (C) SEAT HEIGHT WEIGHT AT24 4ft /2 39 3/ lbs. AT26 6ft /2 40 1/ lbs. AT28 8ft / lbs. PROPRIETARY STATEMENT Keystone Ridge Designs, Inc. is proud to offer the design community exceptional site amenities. Due to the time and resources invested in designing, manufacturing and marketing Keystone Ridge Designs products and services, we pursue design patents, copyrights, trademarks and service marks whenever possible. Any unlawful duplication or misrepresentation of Keystone Ridge Designs products will be rigorously protected.

4 GALLERIA The GALLERIA LITTER RECEPTACLE allows a tray top feature that adds to its functionality with artistry and craftsmanship. GA3T-32 CUSTOM OPTIONS Color: custom KEYSHIELD powder coat Support: bury extension Liner: galvanized or powder coated steel Sleeve: custom KEYSHIELD powder coat color Materials: sustainable hardwood, stainless steel, recycled plastic ENHANCEMENTS Inquire about coordinating benches, ash urns, planters, tables, and other furnishings Ash filler Ash sifter Cast bronze plaques Laser cuts Decals Nelson Marty - Project Engineer STANDARD FEATURES Color: exclusive KEYSHIELD polyester powder coating finish Support: elevated or adjustable Liner: commercial-grade plastic Fully assembled unit Continuous weld seams Three-year warranty Made in the USA

5 GALLERIA GALLERIA LITTER RECEPTACLE The Galleria litter receptacle is Exclusive By Design. MATERIALS Fully-welded commercial-grade steel construction. KEYSHIELD METAL FINISH The trademarked KEYSHIELD finish protects each piece of furniture from chipping, cracking, and UVA damage while providing unparalleled corrosion resistance. Steel products are finished with a two-coat powder coating process applied to a 7-15 mil thickness. Substrate preparation includes sandblasting to a white finish to remove all surface contaminants. The raw product then receives a corrosion-inhibiting phosphate coating prior to the application of the powder coating. The first coat applied to the substrate is zinc rich epoxy powder primer used exclusively on sandblasted parts. The second coat is a colored polyester powder coating. Both coats are electrostatically applied and oven cured according to powder coating manufacturing specifications to create a smooth, satin-like finish and a lowemitting non-porous armor. FULLY ASSEMBLED UNIT The Galleria litter receptacle is manufactured in the USA as a fully assembled unit to provide ultimate stability and avoid damage during transit to the site, saving time and money. GA3T gal. WIDTH 28 ELEVATED LEG 48 1/2 ADJUSTABLE LEG 47 1/2 LID DIAMETER 23 5/8 WEIGHT 225 lbs. GA3T gal /2 47 1/2 23 5/8 235 lbs. PROPRIETARY STATEMENT Keystone Ridge Designs, Inc. is proud to offer the design community exceptional site amenities. Due to the time and resources invested in designing, manufacturing and marketing Keystone Ridge Designs products and services, we pursue design patents, copyrights, trademarks and service marks whenever possible. Any unlawful duplication or misrepresentation of Keystone Ridge Designs products will be rigorously protected.

6 The BICYCLE RACK is designed to coordinate with the complete Atlanta series and offer a decorative bicycle parking solution. AT-104 STANDARD FEATURES Color: exclusive KEYSHIELD polyester powder coating finish Support: bolt down or freestanding Some assembly required Bike rack must be accessible from both sides to accommodate capacity listing Continuous weld seams Three-year warranty Made in the USA CUSTOM OPTIONS Color: custom KEYSHIELD powder coat Support: bury extension Custom bike capacity ENHANCEMENTS Inquire about coordinating benches, litter receptacles, planters, tables, and other furnishings Laser cuts

7 BICYCLE RACK Bench with back is covered by patent no. des. 372,133. Ash/ trash is covered by patent no. des. 459,563. All other Atlanta pieces are Exclusive By Design. KEYSHIELD METAL FINISH The trademarked KEYSHIELD finish protects each piece of furniture from chipping, cracking, and UVA damage while providing unparalleled corrosion resistance. Steel products are finished with a two-coat powder coating process applied to a 7-15 mil thickness. Substrate preparation includes sandblasting to a white finish to remove all surface contaminants. The raw product then receives a corrosion-inhibiting phosphate coating prior to the application of the powder coating. The first coat applied to the substrate is zinc rich epoxy powder primer used exclusively on sandblasted parts. The second coat is a colored polyester powder coating. Both coats are electrostatically applied and oven cured according to powder coating manufacturing specifications to create a smooth, satin-like finish and a lowemitting non-porous armor. MATERIALS Commercial-grade materials, at least 25% recycled raw steel, 100% recyclable steel; completely welded for optimum strength and stability according to Keystone Ridge Designs, Inc. CAD drawing; 1/8 x 1-1/2 square tubing frame with 1/8 x 1 x 2 rectangular tubing inset seat, ¼ x 2 back slats decorated with ¼ solid rings across top arch. SOME ASSEMBLY REQUIRED The Atlanta bicycle rack is manufactured to provide ultimate stability and avoid damage during transit to the site. Minor assembly is required. Instructions are included with each shipment. LENGTH WIDTH HEIGHT WEIGHT AT cap. 32 1/2 36 3/8 37 3/8 75 lbs. AT cap. 62 5/8 36 3/8 37 3/8 125 lbs. PROPRIETARY STATEMENT Keystone Ridge Designs, Inc. is proud to offer the design community exceptional site amenities. Due to the time and resources invested in designing, manufacturing and marketing Keystone Ridge Designs products and services, we pursue design patents, copyrights, trademarks and service marks whenever possible. Any unlawful duplication or misrepresentation of Keystone Ridge Designs products will be rigorously protected.