Bases for Duct Support and Hanging Pipes
|
|
- Christina Allison
- 6 years ago
- Views:
Transcription
1
2 RTS systems provide innovative and economical solutions for non-penetrating rooftop support systems. Our environmentally friendly systems dampen vibrations helping to extend roof life while providing stable support for your high cost equipment. RTS systems fully engineered and pre-built components ensure easy installation. Our system design allows customized components to fit your specific applications making RTS the best choice for Pipe, HVAC Conduit, Duct Support, Crossovers, and Walkway systems.
3 Bases for Duct Support and Hanging Pipes Innovative, economical RTS systems provide complete rooftop support solutions. Our multiple base options ensure the right foundation to meet your application needs. RTS systems are non-roof-penetrating, UV resistant and suitable for installation on most roof types. RTS Classic LD Base RTSUP3A LD bases are strong, economical, and versatile with a 200 lbs. load rating for lightweight low hanging trapeze pipe and duct supports. RTS Classic HD Base RTSFPB18 RTS heavy duty plastic support bases are easily adjustable and provide increased support for up to 750 lbs. for heavier trapeze pipe and duct supports. RTS Recycled Rubber SD Base RTSF21 - No Gussets RTS Recycled Rubber HD Base RTSF21G - With Gussets Both options provide extreme flexibility and strength when supporting trapeze pipe and duct supports for standard and customized systems. Each base can support a uniform load of 1500 lbs. RTS - HD Steel Base RTSSPB20 Steel Support HD Steel bases offer versatility when a rooftop attachment is necessary. This permanent support base allows post installation flashing and is ideal when direct roof connections are required. Supports up to 1500 lbs.
4 RTS Various Base Applications Our multiple base options ensure the right foundation to meet your application needs. RTS systems are flexible and secure, ensuring stability while protecting your expensive equipment. Ideal for walkways, equipment, pipe, duct and conduit applications. RTS Classic LD ST RTSSPSN Conduit and pipe light weight supports are strong, economical, and versatile with a 200 lbs. load rating. RTS Classic LD EX RTSTR1526 Offers extended support for conduit, pipe, walkways, equipment with load bearing of 400 lbs. per system. 26 /38 /50 /52 sections RTS Classic LD with Channel RTSUP6 6 strut RTSUP10 10 strut Ideal for conduit and small pipe supports. Each support carries up to 200 lbs. RTS Strut Lumber RTSSL24 2 x 4 with Integrated channel. RTSSL x 3.5 with Integrated channel. An economical and eco-friendly support. 100% Recycled plastic bases. Available up to 10 long. RTS Classic LD CS Continuous Support RTSCS1516 Lightweight and versatile continuous support. Each base holds up to 200 lbs. Top of support is 3-3/4 above mounting surface. 16 /32 /48 RTS Solar Support RTSASF 100% Recycled rubber base provides a non-roofpenetrating solar panel support. A 120 degree hinge bracket enables a weight load of up to 1000 lbs. per support. RTS 48" Continuous Support RTSCS3100 Lightweight and versatile continuous support. Each base holds up to 200 lbs. Top of support is 5-3/8 above mounting surface. 10 /24 /36 /48 RTS Elevation Supports RTSES8 100% Recycled rubber base offers up to 1500 lbs. of support. 8 /12 /16 elevations
5 RTS - Duct Supports RTS has designed a flexible, strong, and non-roof-penetrating method to support duct work. Utilizing telescoping components and 12 gauge material our duct work supports are economical and offer significant strength and versatility. RTSDSAS48 Single support expandable width and height duct support. RTSDSAS48 - maximum expandable width of 48" with a 32" minimum. RTSDSAS36 - maximum expandable width of 36" with a 22" minimum. Allows flexibility in fixing elevation and width of duct work. RTSDSAD36 Double support adjustable width and height duct support. Allows for snugging duct work between two supports. RTSDSAD48- maximum expandable width of 48 with a 32 minimum. RTSDSAD36 - maximum expandable width of 36 with a 22 minimum. Allows flexibility in fixing elevation and width of duct work. RTSDSFS Single adjustable height support with fixed width duct support. Widths per customer specifications. Allows flexibility in fixing elevation of duct work. RTSDSFD Double adjustable height support with fixed width duct support. Widths per customer specifications. Allows flexibility in fixing elevation of duct work.
6 RTS- Pipe Hanger Supports RTS has designed a flexible, strong, and non-roofpenetrating method of supporting large pipe work on rooftops. Utilizing telescoping components and 12 gauge material our pipe supports offer significant strength and versatility coupled with economic feasibility. RTSPS1AH Single Hanging Pipe Support. Available with clevis or roller hanger support. Easily adjusts and sets elevation in minutes. RTSPS2AH Double Hanging Pipe Support. Available with clevis or roller hanger support. Easily adjusts and sets elevation in minutes. RTSPS4 Quad Hanging Pipe Support. Available with clevis or roller hanger support. Easily adjusts and sets elevation in minutes. Easy to work with and structurally sound.
7 RTS - Interior Supports RTS interior supports provide strong economical time saving options to hanging internal ceiling and wall supports. Turnkey supports allow for quick field installations. RTSWBS Extended wall mount supports provide extra strength when supporting horizontally from a wall. 30 /36 /42 width RTSITP D12-D38 Prefabricated interior pipe roller supports allow for turnkey installation. All products arrive on site assembled and ready for installation. RTSWBA Short wall mount supports provide extra strength when supporting horizontally from a wall. 6 /12 /18 /24 width RTSIM D Multi tier supports for anchoring to a wall or hanging from a ceiling. All supports come with preset shelf brackets. 10 /18 /24 /30 width RTSIT D12-D38 Prefabricated threaded rod interior trapeze supports. Available using: 3/8 or 1/2 threaded rod. Preset systems per user specifications. RTSIASD Interior single drop interior support for adjustable elevation. Telescopic tubing allows for accuracy up to the 1/16 of an inch when setting elevations. RTSITS D12-D38 Prefabricated interior clevis supports allow for turnkey installation. All products arrive on site assembled and ready for installation. Available with: 3/8 or 1/2 threaded rod RTSIATD Interior double drop interior trapeze support for adjustable elevation and easy repair. Telescopic tubing allows for accuracy up to the 1/16 of an inch when setting elevations.
8 Accessories RTS offers a variety of accessories to make your next project flow easier. We carry a large range of strut channels, fittings and clamps. RTS-A158 RTS-Cush-A-Clamp RTS-A238 RTS-GFA4HG916 RTS-A318 RTS-GFT4H916 RTS-C158 RTS-PCR RTS-C158T RTS-SN12 RTS-C1316 RTS-BC15
9 Accessories With large levels of stock and quick turnaround we can meet your next project s needs with outstanding service and quality. Clevis Hanger Fiberglass Strut Systems Clevis Roller Hardware Adjustable Roller Mustang Clamps Chair Type Roller Pipe Shield Plank Grating Cush-A-Therm All thread Base Plates
10 Power of the Sun Solar power is fast becoming the energy source of choice as we strive to develop more efficient, eco-friendly power solutions. RTS systems have been designed to meet the needs of Solar Power installations to ensure better stability, increased system life, and improved efficiency. RTS systems, a division of Eberl Iron Works, Inc. continues to develop products and services to meet our customer's needs today and tomorrow.
11 Eberl Iron Works, Inc. Eberl Iron Works, founded in 1923 by George and Frank Eberl, has grown from a small welding shop to a leading metal fabrication, distribution and installation group providing the highest quality products and service critical in today s market. The Eberl team s commitment to excellence is integral to our 86+ year old family owned and operated business. And, accountability is our pledge to our customers from the products we manufacture to the systems we install. Diversity is how we continue to find new and better ways to provide solutions for our wide range of customers. Eberl Iron Works, Inc. continues to develop metal fabrication products and services, expanding our distribution of framing and traffic safety products, as well as integrating additional installation capabilities to meet our customers most challenging needs. Metal Fabrication Division Unistrut Buffalo Division Systems Installation Division Traffic Safety Products Division RTS Rooftop Support Systems Division
12 We are proud to launch our newest product division, RTS Rooftop Support Systems. By integrating all of our current production and installation capabilities we can today provide customized systems for all your rooftop Pipe, HVAC Conduit, Duct Support, Solar PV, Crossovers, and Walkway systems. With five unique and distinct divisions, Eberl Iron Works, Inc. offers you a lot more than you imagine. Call us today to learn more about all of our products and services. 128 Sycamore Street Buffalo, New York Fax:
DURA-BLOK is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility.
is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility. Channels are through bolted on all sizes for added strength and a 1
More informationDURA-BLOK Rooftop Supports
Cooper B-Line s new line of DURA-BLOK products gives you a versatile and long-term solution for all your roof top support needs. Designed with flexibility in mind, Dura-Blok is ideal for roof top support
More informationDB10 BLTD C10 Pipe Support. Description. Manufacturer Information BOLTED FRAMING GTIN UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DB10 BLTD C10 Pipe Support Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category
More informationSECTION NON-PENETRATING PORTABLE ROOFTOP SUPPORTS AND WALKWAYS. For best results, display hidden notes to specifier.
SECTION 15062 NON-PENETRATING PORTABLE ROOFTOP SUPPORTS AND WALKWAYS PART 1 GENERAL 1.1 SECTION INCLUDES For best results, display hidden notes to specifier. A. Portable, non-penetrating, rooftop support
More informationDURA-BLOK rooftop supports BRTS-13 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-13 DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to provide an economical
More informationSECTION ROOF ACCESSORIES
SECTION 07700 ROOF ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Rooftop support products including: 1. Pillow block pipe supports. 2. Dynamic support series. 3. Elevate support series. 4. Custom
More informationB-LINE SERIES. DURA-BLOK rooftop supports BRTS-17 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-17 B-LINE SERIES DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to
More informationTHE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS
THE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS Connected.Simply www.zsi-foster.com Cush-A-Block Features: 100% Recycled Rubber Qualifies for LEED Credits Meets the Buy America Act and American
More informationADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE
ADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE OVERVIEW REVOLUTIONARY VERSATILE EFFICIENT The Roof Top Blox is a revolutionary roof top support block system that works with height extension rods, securing
More informationADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE
ADJUSTABLE PIPING SUPPORT PRODUCT BROCHURE OVERVIEW REVOLUTIONARY VERSATILE EFFICIENT The Roof Top Blox is a revolutionary roof top support block system that works with height extension rods, securing
More informationSUPPORT AND ANCHORS SECTION 15090
SUPPORT AND ANCHORS SECTION 15090 PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. Work included in this Section: Materials, equipment, fabrication, installation and tests in conformity with applicable codes
More informationYOUR ROOFTOP SUPPORT SOLUTION C
YOUR ROOFTOP SUPPORT SOLUTION C Ports provide innovative, economical support systems for Gas and Refrigeration Pipes, Electrical Conduit, Ducting, Roof Walkways, Air Conditioning, HVAC and Solar Racking.
More informationBefore the C-Port, treated wood and plastics dominated rooftops with pipe and duct supports.
The Result Of A Lost Line. Where the rubber hits the roof Before the C-Port, treated wood and plastics dominated rooftops with pipe and duct supports. Drawbacks of Wood and Plastics Deteriorates Punctures
More informationOSU PROJECT NO PAGE 1 02 NOV 2006 SECTION SUPPORTS AND ANCHORS
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Supports and anchors for piping systems and equipment. 1.2 RELATED WORK SPECIFIED ELSEWHERE A. The provisions of Section 15050, Basic
More informationProject No
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Seismic Requirements for single rod hanger supports for conduit, pipe and other similar systems. B. Seismic Requirements for trapeze type supports for cable tray,
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationnvent CADDY Pyramid Anchoring System
nvent CADDY Pyramid Anchoring System Rooftop Anchoring EASE INSTALLATION IMPROVE USER EXPERIENCE ENSURE A SAFE PRODUCT nvent CADDY Pyramid Anchoring System As a whole, the nvent CADDY Pyramid Anchoring
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationDaytona Beach Pier Building Renovation Jun 2010
SECTION 15060 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationDIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,
More informationCONSTRUCTION MATERIALS
CONSTRUCTION MATERIALS T E C H N O L O G I E S LABORATORY TEST RESULTS Report for: Dymotek Date: September 7, 2010 7 Main St., P.O. Box 440 Revised: December 17, 2010 Ellington, CT 06029 Attention: Tom
More informationELECTRICAL CONTRACTORS THE UNIVERSITY OF TENNESSEE KNOXVILLE, TENNESSEE SECTION PAGE 1 SECTION SUPPORTING DEVICES
KNOXVILLE, TENNESSEE SECTION 26 05 29 PAGE 1 PART 1 - GENERAL: 1.01 DESCRIPTION OF WORK: SECTION 26 05 29 A. Extent of supports, anchors, sleeves and seals is indicated by drawings and schedules and/or
More informationSEISMIC RESTRAINT SYSTEM
1. GENERAL 1.1. Description: SECTION 16012 SEISMIC RESTRAINT SYSTEM 1.1.1. This specification covers design and installation of seismic bracing and anchorage required for conduit, cable tray, bus duct,
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of work
More informationProduct Guide Specification
OMG Roofing Products 153 Bowles Road Agawam, Massachusetts 01001 Toll Free 800-633-3800 Fax 413-821-0417 Website www.olyfast.com E-mail info@olyfast.com Product Guide Specification Specifier Notes: This
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
Page 220529-1 SECTION 220529 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 0529 - MECHANICAL SUPPORTING DEVICES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 22 0529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationSupport Systems for Rooftop Building Services. ecosupportproducts.com. protect the roof. protect the warranty. protect the environment.
Support Systems for Rooftop Building Services ecosupportproducts.com protect the roof. protect the warranty. protect the environment. Why EcoFoot? The design of the EcoFoot was derived from necessity.
More informationACOUSTI-CLEAR AUTOMATIC SERIES TECHNICAL DATA
Paired panel system Acoustically rated glass wall system Automatic seal system Hinged together in groups of two, facilitating quick, easy setup Each panel is supported by a single carrier Ideal for straight-line
More informationMODULAR ACCESS SYSTEMS PRODUCT OVERVIEW
MODULAR ACCESS SYSTEMS PRODUCT OVERVIEW WE CARE FIXFAST Providing maximum safety with minimum fuss to workers at height. Our extensive range of safe access products and fall protection systems are designed
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 22 05 29 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
More informationKINETICS Pipe & Duct Seismic Application Manual
Introduction: Determining the actual rod stiffener requirements for a specific hanger location on a specific project is beyond the scope of this manual. However, the intent of this appendix is to demonstrate
More informationFiberstrut Parts Catalogue
Fiberstrut s Catalogue 1 Technical Information Fiberstrut Fabrication The installation of fiberglass channels and accessories is similar to the installation of metallic channels and accessories. All standard
More informationWalraven Rooftop Solutions
Versatile, durable solutions and support Walraven Rooftop Solutions For supporting rooftop installations BIS Yeti 480 Walraven Rooftop Solutions Your challenge, our support! Walraven Rooftop Solutions
More informationWalraven Rooftop Solutions
Versatile, durable solutions and support Walraven Rooftop Solutions For supporting rooftop installations BIS Yeti 480 Walraven Rooftop Solutions Your challenge, our support! Walraven Rooftop Solutions
More informationSECTION ROOF ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 72 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationEast Central College HANSEN HALL LEVEL 300/400 RENOVATIONS CONSTRUCTION PACKAGE
SECTION 220529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationEast Central College
SECTION 230529 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 WORK INCLUDES A. Base Bid and Alternate Bids: 1. Contractor provide the following hangers and supports for HVAC system
More informationMODULAR ACCESS SYSTEMS PRODUCT OVERVIEW
PRODUCT OVERVIEW FIXFAST USA Providing maximum safety with minimum fuss to workers at height. Our extensive range of safe access products and fall protection systems are designed for industrial, commercial
More informationRooftop Supports & Frames Keeping the art of distribution simple
Rooftop Supports & Frames Keeping the art of distribution simple Shawston supply a complete range of Rooftop Support Feet, from H Frame to low level supports for pipe & electrical containment run offs,
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationMetal Framing Engineering Data & Specifications
Design Data Metal Framing Channel Elements of Sections Nominal Thickness (inches) 12 GA =.105 I Moment of inertia 14 GA =.075 S Section of Modulas 16 GA =.060 r Radius of Gyration Z Nominal Axis A Area
More informationUtility Cabinet System (UCS)
(UCS) The Ultimate in Stainless Steel Modular Walls UCS: Eliminates the need and the costs of constructing a traditional wall Provides easier access and faster installation of the utilities compared to
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.
More informationSolar Attachment. for Flat Roofs. Roof Mounts. Pipe & Conduit Supports. Roof Repair Tape. Roofing Fasteners
Solar Attachment for Flat Roofs Roof Mounts Pipe & Conduit Supports Roof Repair Tape Roofing Fasteners 35 years working with commercial roof systems Relationships with leading roof system man u factu rers
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 230529 - HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of Contract, including General Conditions and other Division 1 Specification Sections,
More informationSECTION VIBRATION CONTROLS FOR PLUMBING PIPING AND EQUIPMENT
Page 220548-1 SECTION 220548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More information. SECTION HANGERS AND SUPPORTS
. SECTION 230529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division I Specification
More informationPIPE PORTAL SYSTEMS EQUIPMENT RAILS ROOF CURBS Roof Products & Systems
PIPE PORTAL SYSTEMS EQUIPMENT RAILS ROOF CURBS Roof Products & Systems Curb Adapter System Roof Products and Systems Curb Adapter is designed and engineered to adapt the existing curb and ductwork to
More informationSPECIFICATION - SECTION (10650) OPERABLE PARTITIONS
Acousti-Clear Automatic Seal Paired Panel 10 22 26 (10650) Operable Partitions SPECIFICATION - SECTION 10 22 26 (10650) OPERABLE PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general
More informationFALSEWORK SOLUTIONS: SLAB SHORING SYSTEM - ROYALFRAME50 SERIES
ROYALFRAME50 SLAB SHORING SYSTEM ROYAL FRAME 50 ROYALframe50 is a lightweight, improved alternate formwork shoring frame. It has galvanised tube legs, each with a 51mm outside diameter and a safe work
More informationSECTION HANGERS AND SUPPORTS PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.
1.01 RELATED DOCUMENTS SECTION 15060 HANGERS AND SUPPORTS PART 1 - GENERAL A. Drawings and Division 1 Specification Sections, apply to this Section. 1.02 SUMMARY A. This Section includes hangers and supports
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More informationModular Scaffold MEKA 48
Modular Scaffold MEKA 48 Imperial units NA MODULAR SCAFFOLD MEKA 48 MODULAR SCAFFOLD The Modular Scaffold MEKA 48 is designed to adapt to the most complex scaffold structures. Its versatility offers a
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationKINETICS Pipe & Duct Seismic Application Manual
SELECTION & LOCATION OF RESTRAINTS FOR PIPE AND DUCT S7.1 Introduction: The actual selection of the seismic restraints and the approximate locations for those restraints along the pipe or duct has typically
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 260548 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationSECTION ROOF EDGE SAFETY RAILING SYSTEM
SECTION 07720 ROOF EDGE SAFETY RAILING SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. Provide and install freestanding KeeGuard Roof Edge Protection System, including pipe railings, uprights, bases, counterweights,
More informationKINETICS Pipe & Duct Seismic Application Manual
QUICK START READ ME FIRST I1.1 Seismic Restraint Categories and Types: Seismic restraints for pipe and duct are generally separated into to two categories. 1. Transverse Seismic Restraints: These act to
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationSECTION AIR-TO-AIR ENERGY RECOVERY EQUIPMENT
SECTION 23 72 00 AIR-TO-AIR ENERGY RECOVERY EQUIPMENT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More information100% Speed One Pump Operating Range 90% Speed 65.6% Efficiency 76.6% Efficiency
350 300 100% Speed One Pump Operating Range 90% Speed 250 65.6% Efficiency 76.6% Efficiency Total Head (ft) 200 150 80% Speed 70% Speed 60% Speed 83.6% Efficiency 80 PSI Pressure 85.9% Efficiency 83.6%
More informationModular Scaffolding MEKA 48
Modular Scaffolding MEKA 48 MODULAR SCAFFOLDING MEKA 48 MODULAR SCAFFOLDING The Modular Scaffolding MEKA 48 is designed to adapt to the most complex scaffold structures. Its versatility offers a wide range
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1413 FACILITY STORM DRAINAGE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationB. American Society for Testing and Materials: 1. ASTM F708 - Standard Practice for Design and Installation of Rigid Pipe Hangers.
SECTION 230529 - HANGERS AND SUPPORTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Sleeves. 6. Mechanical sleeve seals. 7. Firestopping
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationA. Pipe Supports: ANSI B 31.1, Power Piping. B. Automatic Sprinkler Pipe Supports: Refer to Section
SECTION 15140 SUPPORTS, ANCHORS, AND SEALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract including General and Supplementary Conditions, Division 1 Specification
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
Page 230548-1 SECTION 230548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationdesigned to be better. Rooftop Support Systems
designed to be better. Rooftop Support Systems Cablo-Port is the innovative solution for rooftop equipment support. Standard Curb style with Poorly supported HVAC equipment, pipes and cable pathways can
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following storm drainage piping inside the building.
SECTION 221413 - FACILITY STORM DRAINAGE PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following storm drainage piping inside the building. 1. Pipe, tube, and fittings. 2. Special pipe
More information1. Hangers and supports for electrical equipment and systems.
PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...
More informationSECTION COLD-FORMED METAL FRAMING
SECTION 05 40 00 COLD-FORMED METAL FRAMING SPEC WRITER NOTE: Delete between //---// if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the
More informationSECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
More informationDistriubted by Material Storage Systems, Inc CANTILEVER. Distriubted by Material Storage Systems, Inc
CANTILEVER General Characteristics of Cantilever Cantilever rack is a medium to heavy duty storage solution for large, long or irregular shaped loads. As the name suggests, this rack features load bearing
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS. 1. Hangers and supports for electrical equipment and systems.
SECTION 26 05 29 HANGERS AND SUPPORTS FOR PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Hangers and supports for electrical equipment and systems. 1.2 DEFINITIONS A. EMT: Electrical
More informationSECTION ENCLOSED BUS ASSEMBLIES
SECTION 262500 ENCLOSED BUS ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMEP Seismic & Wind Provisions of ASCE Prepared for the 2017 Rochester Engineering Symposium Richard Sherren, P.E.
MEP Seismic & Wind Provisions of ASCE 7-10 Prepared for the 2017 Rochester Engineering Symposium Richard Sherren, P.E. 1 New York State Model Building Code The state of New York has adopted the 2015 International
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN
SECTION 08350 MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 0548 - PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationStudent Services & Classroom Addition SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 48 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationPIPING SPECIALTIES (PLUMBING) A. American Society for Testing and Materials (ASTM):
SECTION 15430 PIPING SPECIALTIES (PLUMBING) PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 15410 - Piping (Plumbing). 1.02 REFERENCES A. American Society for Testing and Materials (ASTM): 1. A126-95
More informationRapiDeck TM Composite Equipment Platform
RapiDeck TM Composite Equipment Platform Installs in Hours Light Weight Low Installation Cost Highly Slip Resistant Corrosion Resistant Non-Conductive High Performance Composite Solutions RapiDeck TM -
More informationSUPERIOR CAL-SHIELDS Features & Benefits FAST
SUPERIOR CAL-SHIELDS Features & Benefits FAST One-piece hinged construction Insulation, vapor barrier and G-90 galvanized steel shield in one unit. Butt-and-go Insulation extends beyond the steel shield
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationSECTION CHAIN LINK FENCES AND GATES (PARK)
SECTION 02821 CHAIN LINK FENCES AND GATES (PARK) PART I GENERAL 1.1 SECTION INCLUDES A. Installation of chain link fences, and gate units provided by single source including erection accessories, fittings,
More informationPRODUCT SUMMARY INDEX
PRODUCT SUMMARY INDEX Gas and Mechanical Supports Model 1.5.......................... 2 Model 3-R-2......................... 2 Model 3-R-4......................... 2 Model 3-RAH-7......................
More informationSRS-02 NEW SEISMIC RESTRAINTS. Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems SYSTEMS THAT MAKE SENSE
NEW SRS-02 SEISMIC RESTRAINTS Multi-Directional Bracing For Electrical Conduit, Cable Tray And Mechanical Piping Systems OSHPD Pre-Approved System SYSTEMS THAT MAKE SENSE INTRODUCTION INTRODUCTION What
More information