(For compliance with the new sewers for adoption regulation or building regulations part H1)
|
|
- Avis Morris
- 6 years ago
- Views:
Transcription
1 Plastic Drainage Keyline offers a comprehensive range of products suitable for all building, foul, surface water and land drainage applications - including new innovative, cost-effective systems for compliance with the amended Building Regulations Part H (England and Wales) and the Scottish Building Standards technical handbooks.
2 NOW UPDATED FOR SfA7! (For compliance with the new sewers for adoption regulation or building regulations part H1) Civils and Drainage Solutions The Essential Guide Plastic Drainage 87
3 Civils and Drainage Solutions The Essential Guide Plastic Drainage 88 New regulations for inspection chambers What s changed New rules and regulations about drainage are now in force. Here are the main things you need to know: Adoptable drainage now extends further than before l Foul and surface water drains which serve more than one property, and connect to public sewers, are now part of adopted drainage A new 7 th edition of Sewers for Adoption [SfA7] has been published l This includes required standards and installation details for installing and connecting inspection chambers Plastic inspection chambers are now fully-authorised for adoptable installations SfA7 includes specific details for flexible (plastic) chambers: l Type 4 chamber to max. 2 metres depth l Type 3 chamber to max. 3 metres depth New British Standard for chambers: BS EN BS EN will supercede BS 7158 from January It has two parts: l Part 1 for installations to max. 1.2m depth (or to 0.9m depth if inspection chamber shaft is less than 450mm dia.) l Part 2 for installations to 3m depth...and what hasn t changed Building Regulations still apply to non-adoptable drainage l Foul and surface water drains which serve non-adoptable installations remain unchanged. NOTE: Non-adoptable chambers are highlighted on the illustration overleaf Inspection chambers in non-adoptable locations must comply with these chamber types in Part H1 of Building Regulations: l Shallow to max. 0.6m depth for chamber shafts under 450mm dia. or max.1.2m depth if shaft is 450mm dia. or more l Deep exceeding 1.2m depth for chambers with shafts min. 450mm dia. NOTE: BS EN also applies to non-adoptable chambers NOW UPDATED FOR SfA7!
4 Wavin Chambers, a comprehensive choice Whatever the installation requires, Wavin has exactly the inspection chamber you need. This table gives you a summary of our chamber ranges and essential information relevant to your selection. No. of Inlets Inlet Sizes (mm OD) Base Type Max Invert Base Dia. SfA7 Depth* (m) (mm) Type Shallow * Multi-Base * Mini Access PPIC Universal * Range Range Range , 4 Range , 4 * NOTE: Maximum invert depths shown are for individual base types. Under SfA7 and Building Regulations, maximum permitted depth can be less. Using the selectors FIRST, check the following about the chamber you need to install: 1. Will it be Adoptable or Non-adoptable? See overleaf if in doubt. 2. How many inlet connections are needed into the chamber base? If there are 2 or more inlets, the selectors will help you identify the ideal chamber base configuration for the job. 3. What size pipe connections are required for the chamber? Adaptors may be needed in some cases. 4. At what depth do you need to install it? There are statutory installation depth limits applicable (see inside) and some chamber ranges have their own design depth limits. NOW, apply this information to the relevant selector (Adoptable or Non-adoptable). See selectors on pages 92 and 94 to help you identify the recommended chamber base. Civils and Drainage Solutions The Essential Guide Plastic Drainage 89
5 Civils and Drainage Solutions The Essential Guide Plastic Drainage 90 5a 5a NOW UPDATED FOR SfA7! 1a 3a 1p 2a 2a 2a 1p 3a 4a 3a 3p FOR COMPLIANCE WITH NEW SEWERS FOR ADOPTION SfA7 or BUILDING REGULATIONS PART H1
6 KEY Foul Water a = Adoptable Surface Water p = Private OSMA Shallow, OSMA Multi-Base or Hepworth Mini Access Standards BS EN a SfA7 Chamber detail Type 4 Shallow (0.6m max invert) Multi-Base/Mini Access (0.9m max invert) Building regulations Part H1, Shallow (0.6m max invert) 1 Wavin Range 315 Standards BS EN a SfA7 Chamber detail Type 4 (2.0m max invert) Building regulations Part H1, Shallow (0.6m max invert) OSMA Universal or Hepworth PPIC Standards BS EN a SfA7 Chamber detail Type 4 (1.2m max invert) Building regulations Part H1, Shallow (<1.2m max invert) 2 Wavin Range 200 Standards BS EN a SfA7 Chamber detail Type 4 (2.0m max invert) Building regulations Part H1, Shallow (0.6m max invert) 3 5 Wavin Range 600 Standards BS EN a SfA7 Chamber detail Type 3 or 4 (3.0m max invert) Building regulations Part H1, Deep (>1.2m max invert) 4 Civils and Drainage Solutions The Essential Guide Plastic Drainage 91
7 Civils and Drainage Solutions The Essential Guide Plastic Drainage 92 CHAMBERS SELECTOR: for ADOPTABLE applications REQUIRED COMPLIANCE TO Sewers for Adoption 7 th ed. [SfA7] MAX. PERMITTED DEPTH under Sewers for adoption 7 th ed. [SfA7] 2.0m max. 2.0m max. 3.0m max. and BS EN /or BS EN <1.2m max. (<0.9m max. if shaft <180mm dia.) <3.0m max. <3.0m max. HOW MANY INLETS do you need to allow for? CONFIGURATION OPTIONS SfA7 Inspection Chamber Detail Type 4 SfA7 Inspection Chamber Detail Type 4 SfA7 Inspection Chamber Detail Type 3 to BS EN Part 1 to BS EN Part 2 to BS EN Part NOW UPDATED FOR SfA7! Straight channel Shallow IC*: 4D960 Multi-Base IC: 4D910 Mini Access: SDAC1/1 Range 200: 24/26NE300 Range 315: 34/36NE300 Bent channel at 90 Multi-Base IC: 4D918 Mini Access s : SDAC1/1 Range 200 s : 24/26NE300 Range 315 s : 34/36NE300 Range 500 s : Bent channel at 30 Shallow IC s : 4D960 Multi-Base IC s : 4D910 Mini Access s : SDAC1/1 Range 200 s : 24/26NE300 Range 315 s : 34/36NE300 Range 500 s :
8 Inlet(s) at 90 Single side (LH or RH) Multi-Base IC: 4D911 4D912 Mini Access: SDAC1/1 Range 315 s : 34NE303 36NE303 Inlet(s) at 90 Both sides Multi-Base IC: 4D935 Mini Access s : SDAC1/1 Range 315 s : 34NE303 36NE303 Inlet(s) at 45 Single side (LH or RH) Multi-Base IC: 4D913 4D914 Mini Access: SDAC1/1 Range 315: 34NE301 34NE302 36NE301 36NE302 Inlet(s) at 45 Both sides Shallow IC*: 4D960 Mini Access: SDAC1/1 Range 315: 34NE303 36NE303 Inlets at 90 & 45 Single side (LH or RH) Multi-Base IC: 4D933 4D934 56NE 310 Inlets at 90 & 45 Both sides Universal IC: 4D922 6D929 6UR929 Universal IC: 4D922 6D929 6UR929 For details of Shallow, Multi-Base and Universal Inspection Chambers, see Plastic Drainage section For details of Mini Access and PPIC, see Clay Drainage section * Shallow Inspection Chamber 4D960 maximum installation depth: 0.6m s Additional bends required for this configuration Civils and Drainage Solutions The Essential Guide Plastic Drainage 93
9 Civils and Drainage Solutions The Essential Guide Plastic Drainage 94 CHAMBERS SELECTOR: for NON-ADOPTABLE applications REQUIRED COMPLIANCE TO Building Regulations 2010 Approved Document H Building Regulations H1 Building Regulations H1 Building Regulations H1 to BS 7158 and BS EN Part 1 to BS 7158 and BS EN Parts 1 and 2 to BS 7158 and BS EN Part 2 MAX. PERMITTED DEPTH under BUILDING REGULATIONS H1 (Shallow) <0.6m (Shallow) <1.2m (Deep) >1.2m and BS EN /or BS EN <1.2m max. (<0.9m max. if shaft <190mm dia.) BS EN : <0.9m max. BS EN : <3.0m max. <3.0m max. NOW UPDATED FOR SfA7! HOW MANY INLETS do you need to allow for? CONFIGURATION OPTIONS Straight channel Shallow IC*: 4D960 Multi-Base IC: 4D910 Mini Access: SDAC1/1 Universal IC: 4D922 6D928 6UR928 Bent channel at 90 Multi-Base IC: 4D918 Mini Access s : SDAC1/1 Universal IC s : 4D922 6D928 6UR928 PPIC s : Range 500 s : Bent channel at 30 Shallow IC s : 4D960 Multi-Base IC s : 4D910 Mini Access s : SDAC1/1 Universal IC s : 4D922 6D928 6UR928 PPIC s : Range 500 s :
10 Inlet(s) at 90 Single side (LH or RH) Multi-Base IC: 4D911 4D912 Mini Access: SDAC1/1 Universal IC: 4D922 6D928 6UR928 Inlet(s) at 90 Both sides Multi-Base IC: 4D935 Mini Access s : SDAC1/1 Universal IC: 4D922 6D928 6UR928 Inlet(s) at 45 Single side (LH or RH) Multi-Base IC: 4D913 4D914 Mini Access: SDAC1/1 Universal IC: 4D922 6D929 6UR929 Inlet(s) at 45 Both sides Shallow IC*: 4D960 Mini Access: SDAC1/1 Universal IC: 4D922 6D929 6UR929 Inlets at 90 & 45 Single side (LH or RH) Multi-Base IC: 4D933 4D934 Universal IC: 4D922 6D929 6UR929 Inlets at 90 & 45 Both sides Universal IC: 4D922 6D929 6UR929 Universal IC: 4D922 6D929 6UR929 Universal IC: 4D922 6D929 6UR929 Universal IC: 4D922 6D929 6UR929 For details of Shallow, Multi-Base and Universal Inspection Chambers, see Plastic Drainage section For details of Mini Access and PPIC, see Clay Drainage section * Shallow Inspection Chamber 4D960 maximum installation depth: 0.6m s Additional bends required for this configuration Civils and Drainage Solutions The Essential Guide Plastic Drainage 95
11 Civils and Drainage Solutions The Essential Guide Plastic Drainage 96 OsmaDrain and UltraRib Dimensions and Availability Product 1. OsmaDrain Nominal Diameter mm 82* 110* 150/160* Solid yes yes yes no no no no no no 3 & 6 Slotted no yes yes no no no no no no 6 Pipe Length m 2. UltraRib no no yes yes yes no no no no 3 & 6 1. OsmaDrain: building drainage connections to main sewers The OsmaDrain system includes a wide range of bends, junctions, and other fittings, including inspection chambers and adaptors, allowing connection to traditional cast iron and clayware drains. 2. UltraRib: foul and surface water drainage The pipe is available socketed and plain ended in a choice of lengths. There is a full range of bends, junctions, and other fittings, including adaptors allowing connection to, for example, cast iron and clayware drains. * 82, 110 and 160mm OsmaDrain pipes are described by the outside diameter; all other pipes are described by the inside diameter.
12 OsmaDrain: building drainage connections to main sewers The OsmaDrain system is designed for use in gravity drainage installations at depths of up to 10m, with outfalls into Local Authority sewers, private treatment plants, and cesspools, and for surface water drainage into soakaways or watercourses. Available in diameters of 82, 110 and 160mm the OsmaDrain system, includes a comprehensive range of fittings to accommodate all installation requirements. PVC-U provides superior self-cleansing properties at low velocities and this can often help to reduce excavation depths and permit the use of smaller diameter pipes, as well as possibly obviating the need for a pumped system. OsmaDrain 82mm System 3D073 P/E Pipe - 3m D076 P/E Pipe - 6m D105 D/S Slip Coupler D116 Snap Cap (spare) D130 T Ring (spare) D161 S/S Bend D163 S/S Bend D190 S/S Junction D205 D/S Pipe Coupler D206 P/E Adaptor 68mm RW Pipe D561 D/S Bend Civils and Drainage Solutions The Essential Guide Plastic Drainage 97
13 Civils and Drainage Solutions The Essential Guide Plastic Drainage 98 OsmaDrain 110mm System 4D066 P/E Slotted Pipe - 6m D073 P/E Pipe - 3m D076 P/E Pipe - 6m S085 Socket Bracket Brace Assembly S086 Pipe Bracket Assembly D095 S/S Reducer - 110mm x 82mm D104 D/S Coupler (for slotted pipe) D105 D/S Slip Coupler D107 S/S Adaptor - to clay socket D115 S/S Settlement Socket D116 Snap Cap and Seal D124 S/SW Coupler D128 S/S Adaptor - to clay spigot D129 D/S Adaptor - to thinwall clay D131 Protection Sleeve D149 Rainwater Adaptor x 68mm D159 Universal Drain Adaptor D161 S/S Bend D162 S/S Bend D163 S/S Bend D166 S/S Bend D167 S/S Bend D168 S/S Bend D169 S/S Access Bend D173 S/S Adjustable Bend for variable angles up to 30, rotate segments to achieve required angle 4D181 S/S LR Bend
14 OsmaDrain 110mm System cont. 4D183 S/S LR Bend D190 S/S Equal Junction D193 D/S Equal Junction D205 D/S Pipe Coupler D210 S/S Equal Junction D213 D/S Equal Junction D274 S/S Access Pipe D281 P/E LR Bend D283 P/E LR Bend D290 S/S Screwed Access Cover D292 P/E Screwed Access Cover allows full bore access to the drainage system for cleaning, fits into standard OsmaDrain ring seal socket 4D295 Temporary Site Cap D296 P/E Socket Plug incorporates one closed boss socket position, will form either a 32mm, 40mm or 50mm waste pipe connection when fitted with the appropriate boss socket adaptor 4D297 P/E Socket Plug (open) D298 Internal Drain Connector - 32/40mm D299 Internal Drain Connector - 50mm D314 Ring Seal for 4D325 (spare) D317 Rodding Eye Gasket - oval (spare) D318 Rodding Eye Screws - new style (pkt 4) D325 S/S Cover & Frame - 250mm diameter suitable for use in situations requiring a maximum loading of up to 10kN (1T), where the frame of the cover is supported in service by a concrete plinth Civils and Drainage Solutions The Essential Guide Plastic Drainage 99
15 Civils and Drainage Solutions The Essential Guide Plastic Drainage 100 OsmaDrain 110mm System cont. 4D328 S.I.C. Cover (spare) D360 P/E Square Rodding Eye S380 Cleaner - 250ml can S383 Solvent No ml can S384 Solvent No ml can D391 Soluble Lubricant - 0.5kg tub S392 Silicone Lubricant Spray - 400ml S394 Solvent Cement Filler - 200g tube D395 Soluble Lubricant - 2.5kg tub D398 S/S Boss Adaptor / D399 S/S Boss Adaptor / D418 Inspection Junction Washers (pkt 4) D420 S/S Inspection Pipe D421 Inspection Junction Gasket (spare) D492 S/S Equal Double Inspection Junction D494 Inspection Junction Plug (spare) D500 S/S Universal Gully Trap D503 SW/S Plain Hopper D504 SW/S Vertical Inlet Hopper D505 Vertical Inlet Cover (spare) D506 Universal Gully Grating (spare) D507 P/E Plain Hopper D508 P/E Vertical Inlet Hopper with 150mm long spigot 4D526 Sealed Access Plate D527 P/E Sealed Access Hopper D561 D/S Bend D562 D/S Bend
16 OsmaDrain 110mm System cont. 4D563 D/S Bend D566 D/S Bend D567 D/S Bend D568 D/S Bend D569 D/S Access Bend D573 D/S Adjustable Bend D581 D/S LR Bend satisfies recommendations of BS 5572: 1994 for base of soil stack applications. Manufactured with cut out marks to convert to a Channel Bend for use within traditional manholes 4D583 D/S LR Bend D585 D/S LR Channel Bend D587 D/S LR Channel Bend D589 S/S Bossed Pipe D593 D/S Access Junction D700 S/S Bottle Gully D701 S/S Yard Gully D702 Sealed Access Cover D706 Vertical Inlet Grating & Frame D708 Square Grating and Frame D800 P/E Trapped Yard Gully mm overall depth, supplied complete with removable rubber bung for rodding access 4D810 DI Grating/Frame - B D815 Perforated Catchment Bucket D900 S/S Bottle Gully provides access to the drainage system for cleaning, supplied with all bosses closed Civils and Drainage Solutions The Essential Guide Plastic Drainage 101
17 Civils and Drainage Solutions The Essential Guide Plastic Drainage 102 OsmaDrain 110mm System cont. 4D901 S/S Bottle Gully (open) D902 Access Liner for 593 (spare) D904 Screwed Access Cap (spare) D906 Bottle Gully Grating (spare) D908 Bottle Gully Cover and Frame (spare) D909 Access Liner for Bends (spare) D910 D/S Multi-base IC Base - straight D911 D/S Multi-base IC Base - single 90 - LH D912 D/S Multi-base IC Base - single 90 - RH D913 D/S Multi-base IC Base - single 45 - LH D914 D/S Multi-base IC Base - single 45 - RH D915 Sealed Access Cover D916 Bottle Gully Riser D917 D/S Multi-Base IC Base - double D918 D/S Multi-Base IC Base - bend D919 DI Grating for 4D900/ D922 D/S Universal IC Base - 270mm invert mm straight main channel with four 110mm (2 x 45 and 2 x 90 ) right/left hand branch entries. Supplied with 3 blank-off plugs for use in unused side entries 4D923 D/S Equal NIC Base 110mm x 110mm D920 PP Square Cover & Frame D924 PP Round Cover & Frame - Restrictor D926 Universal IC Plug (spare) D927 PP Round Cover & Frame D930 Inspection Junction Cover - small (spare) D932 Universal IC Sealant (spare) D933 D/S Multi-Base IC Base - twin LH D934 D/S Multi-Base IC Base - twin RH
18 OsmaDrain 110mm System cont. 4D935 D/S Multi-Base IC Base - double D937 P/E Multi-Base IC Shaft - 150mm D942 DI Cover/Frame - B D945 Square Recessed Steel Cover/PP Frame D946 Square Recessed Steel Cover/PP Frame - sealed D948 Chamber Channel Cover - LH D949 Chamber Channel Cover - RH D955 Lifting Keys D957 MB Shaft Seal (spare) D960 D/S Shallow IC - 600mm mm invert depth, supplied with 2 profiled, blank-off plugs for use in unused side entries 4D961 P/E Sealed Cover/Adjacent Frame mm diameter - suitable for use in situations requiring a maximum loading of up to 10kN (1T) where the frame is supported in service by a concrete plinth 4D964 Shallow IC Plug (spare) D969 P/E Multi-Base Cover/Frame D992 Access Cap Gasket (spare) D993 Bottle Gully Plug - new style (spare) D975 Inspection Chamber Shaft - 450mm diameter Civils and Drainage Solutions The Essential Guide Plastic Drainage 103
19 Civils and Drainage Solutions The Essential Guide Plastic Drainage 104 OsmaDrain 160mm System 6D066 P/E Slotted Pipe - 6m D073 P/E Pipe - 3m D076 P/E Pipe - 6m S085 Socket Bracket Brace Assembly S086 Pipe Bracket Assembly D099 S/S Reducer - 160mm x 110mm D104 D/S Coupler (for slotted pipe) D105 D/S Slip Coupler D116 Snap Cap (spare) D124 S/SW Coupler D128 S/S Adaptor - to clay spigot D129 D/S Adaptor to thinwall clay. Connector to BS EN 295 thin wall clay spigot 6D130 T Ring (spare) D131 Protection Sleeve D161 S/S Bend D163 S/S Bend D166 S/S Bend D167 S/S Bend D190 S/S Equal Junction D193 D/S Equal Junction D198 S/S Unequal Junction D199 D/S Unequal Junction D205 D/S Pipe Coupler D210 S/S Equal Junction D213 D/S Equal Junction D218 S/S Unequal Junction D219 D/S Unequal Junction D274 S/S Access Pipe D281 P/E LR Bend
20 OsmaDrain 160mm System cont. 6D283 P/E LR Bend D290 S/S Screwed Access Cover D292 P/E Screwed Access Cover allows full bore access to the drainage system for cleaning, fits into a standard OsmaDrain ring seal socket 6D296 P/E Socket Plug D360 P/E Square Rodding Eye D561 D/S Bend D563 D/S Bend D566 D/S Bend D567 D/S Bend D917 NIC Ring Seal (spare) D928 D/S Equal Inspection Base - 160mm x 160mm D929 D/S Unequal Inspection Base - 160mm x 110mm mm straight main channel with four 110mm (2 x 45 and 2 x 90 ) right/left hand branch entries. Supplied with 3 blank-off plugs for use in unused side entries 6D mm Restrictor Ring (spare) D936 D/S Equal NIC Base - 160mm x 160mm mm straight main channel with two 160mm x 90 right/left hand branch entries. Supplied complete with sealing ring and one blank-off plug for use in unused side entries Civils and Drainage Solutions The Essential Guide Plastic Drainage 105
21 Civils and Drainage Solutions The Essential Guide Plastic Drainage 106 OsmaDrain 160mm System cont. 6D937 D/S Unequal NIC Base - 160mm x 110mm mm straight main channel with four 110mm (2 x 90 and 2 x 45 ) right/left hand branch entries. Supplied complete with sealing ring and three blank-off plugs for use in unused side entries 6D938 NIC Inspection Chamber Shaft - 3m length for use with 4D923, 6D936 and 6D937 NIC bases 6D934 NIC Shaft 1.5m length Tool and equipment hire available Call
22 UltraRib: foul and surface water drainage UltraRib is a PVC-U pipe system designed for adoptable sewer installations. The pipe has a smooth inner surface and is reinforced externally with a pattern of integral, concentric ribs which provide exceptional axial rigidity and enhanced radial strength without a significant increase in weight. UltraRib pipes & fittings (where applicable) comply with the following: BS EN plastics piping systems for non-pressure underground drainage & sewerage Water industry specifications (WIS): WIS July 2000: Issue 1 The system employs fully socketed joints for security and ease of installation. The design of the socket prevents accidental displacement of the O ring during installation, and the resulting joint provides a flush fit between the internal bore of the pipe and the fitting. The assembled joint provides built-in accommodation for differential movement without damage. UltraRib 150mm System 6UR043 S/S Pipe - 3m UR046 S/S Pipe - 6m UR073 P/E Pipe - 3m UR099 S/S Reducer - 150mm x 110mm level invert reducer to BS EN 1401 OsmaDrain spigot 6UR105 D/S Slip Coupler UR106 D/S Adaptor - to clay or concrete spigot UR117 Ring Seal (spare) UR128 S/S Adaptor connector to BS 1211 or BS 437 cast iron spigot or BS EN 245 clay spigot 6UR129 D/S Adaptor - to thinwall clay spigot Civils and Drainage Solutions The Essential Guide Plastic Drainage 107
23 Civils and Drainage Solutions The Essential Guide Plastic Drainage 108 UltraRib 150mm System cont. 6UR141 S/S Adaptor - to BS EN 1401 spigot UR142 D/S Adaptor - to BS EN 1401 socket UR143 S/S Adaptor - to BS EN 1401 socket UR163 S/S Bend UR193 D/S Equal Junction UR199 D/S Junction (150 x 110) UR205 D/S Pipe Coupler for jointing UltraRib pipe 6UR213 D/S Equal Junction UR219 D/S Junction (150 x 110) UR290 S/S Screwed Access Cover UR292 P/E Screwed Access Cover fits into an UltraRib socket to allow full access to the sewerage system for cleaning 6UR296 P/E Socket Plug UR395 Soluble Lubricant - 2.5kg tub UR396 Soluble Lubricant - 5kg tub UR560 D/S Bend to BS EN 1401 spigot UR561 D/S Bend UR563 D/S Bend UR566 D/S Bend UR567 D/S Bend UR590 S/S Road Gully - 350mm diameter UR600 S/S Road Gully mm diameter x 900mm overall depth trapped road gully
24 UltraRib 150mm System cont. 6UR869 S/S Rocker Pipe D975 Universal Inspection Chamber Shaft mm diameter 305mm deep 6UR928 D/S Equal Inspection Chamber Base 450mm diameter - 150mm x 150mm - 150mm straight main channel with two 150mm x 90 right/left hand branch entries. Supplied with one blank-off plug for use in unused side entry 6UR929 D/S Unequal Insp Base - 150mm x 110mm D934 NIC Shaft 1.5m length D931 P/E Polypropylene Square Cover and Frame UR936 D/S Equal NIC Base 150mm x 150mm UR937 D/S Unequal NIC Base 150mm x 110mm mm straight main channel with four 110mm (2 x 90 and 2 x 45 ) right/left hand branch entries. Supplied complete with sealing ring and three blank-off plugs for use in unused side entries 6D938 NIC Inspection Chamber Shaft - 3m length for use with 6UR936 and 6UR937 NIC bases 6D940 NIC Telescopic Adaptor Civils and Drainage Solutions The Essential Guide Plastic Drainage 109
25 Civils and Drainage Solutions The Essential Guide Plastic Drainage 110 UltraRib 150mm System cont. 4D942 Dl Cover/Frame - B D920 PP Square Cover & Frame - 450mm Restricted access Committed to Environmentally Responsible Sourcing 4D924 PP Round Cover & Frame - 450mm D955 Lifting Keys UR993 Testing Plug
26 UltraRib 225mm System 9UR043 S/S Pipe - 3m UR046 S/S Pipe - 6m UR073 P/E Pipe - 3m UR095 S/S Reducer - 225mm x 150mm level invert reducer 9UR105 D/S Slip Coupler UR109 D/S Adaptor - to clay spigot UR117 Ring Seal (spare) UR205 D/S Pipe Coupler UR213 D/S Equal Junction UR224 D/S Junction (225 x 110) UR226 D/S Junction (225 x 160) UR227 D/S Junction (225 x 150) UR229 D/S Slip Junction (225 x 150) UR296 P/E Socket Plug UR561 D/S Bend UR563 D/S Bend UR566 D/S Bend UR567 D/S Bend UR869 S/S Rocker Pipe mm effective length Civils and Drainage Solutions The Essential Guide Plastic Drainage 111
27 Civils and Drainage Solutions The Essential Guide Plastic Drainage 112 UltraRib 300mm System 12UR043 S/S Pipe - 3m UR073 P/E Pipe - 3m UR093 S/S Reducer - 300mm x 225mm level invert reducer 12UR105 D/S Slip Coupler for new branch connections and repairs 12UR112 D/S Adaptor - to concrete spigot UR117 Ring Seal (spare) UR205 D/S Pipe Coupler UR213 D/S Equal Junction UR236 D/S Junction (300 x 160) UR237 D/S Junction (300 x 150) UR239 D/S Slip Junction (300 x 150) UR240 D/S Junction (300 x 225) UR296 P/E Socket Plug allows full bore access into the sewerage system for cleaning 12UR561 D/S Bend UR563 D/S Bend UR566 D/S Bend UR567 D/S Bend UR869 S/S Rocker Pipe mm effective length
28 New Wavin Inspection Chambers Range Range 200 Inspection Chambers Supplier 24NE300 26NE300 20NE002 20NE015 Range 315 Inspection Chambers 34NE300 36NE300 Nom. Size 110mm 160mm 200mm 110mm 160mm Description D/S Equal Inspection Chamber Base 200mm dia. base with straight channel and single inlet. P/E Inspection Chamber Shaft 200mm dia. plain-ended shaft. Length: 2 metres. Square Cover & Frame A15 (Polypropylene) for non-trafficked/landscaped location. D/S Equal Inspection Chamber Base 315mm dia. base with straight channel and single inlet. NOW UPDATED FOR SfA7! Keyline Range 315 Inspection Chambers cont. Supplier 34NE301 36NE301 34NE302 36NE302 34NE303 36NE303 30NE002 Nom. Size 110mm 160mm 110mm 160mm 110mm 160mm 315mm Description D/S Equal Inspection Chamber Base 315mm dia. base with straight channel And 2 inlets, inc. 45 left-hand equal branch inlet. D/S Equal Inspection Chamber Base 315mm dia. base with straight channel with 2 inlets, inc. 45 right-hand equal branch inlet. D/S Equal Inspection Chamber Base 315mm dia. base with straight channel with 3 inlets, inc. 2 x 45 equal branch inlets. P/E Inspection Chamber Shaft 315mm dia. plain-ended corrugated shaft. Length: 2 metres. Keyline NE015 Square Cover & Frame A15 (Polypropylene) for non-trafficked/landscaped location. Civils and Drainage Solutions The Essential Guide Plastic Drainage 113
29 Civils and Drainage Solutions The Essential Guide Plastic Drainage 114 Range 500 Inspection Chambers Supplier Nom. Size 110mm Description D/S Equal Inspection Chamber Base 500mm dia. base with 110mm straight channel with 5 x 110mm inlets, inc. 2 x 45 and 2 x 90 branches.* Keyline Supplier Nom. Size Description Keyline NE mm P/E Inspection Chamber Shaft mm dia. plain-ended shaft. Length: 3 metres. 54NE mm D/S Unequal Inspection Chamber Base 500mm dia. base with 160mm straight channel with 1 x 160mm inlet and 4 x 110mm inlets, inc. 2 x 45 and 2 x 90 branches.* NE mm Restriction Access Cap Restricts access to 350mm. 54NE mm D/S Unequal Inspection Chamber Base 500mm dia. base with 150mm straight channel with 1 x 150mm inlet and 4 x 110mm inlets, inc. 2 x 45 and 2 x 90 branches.* NOW UPDATED FOR SfA7! *Supplied with blank-off plugs for unused side entries.
30 Range 600 Inspection Chambers Supplier 66NE300 69NE NE300 Nom. Size 150mm 225mm 300mm Description D/S Equal Inspection Chamber Base 600mm dia. base straight channel and single inlet. Keyline Supplier 66NE316 69NE NE316 Nom. Size 150mm 225mm 300mm Description D/S Equal Inspection Chamber Base 600mm dia. base with straight channel and 3 inlets inc. 2 x 90 equal branch inlets. Keyline NE314 69NE NE mm 225mm 300mm D/S Equal Inspection Chamber Base 600mm dia. base with bent 90 channel and single inlet NE mm P/E Inspection Chamber Shaft 600mm dia. plain-ended shaft. Length: 3 metres NE315 69NE NE mm 225mm 300mm D/S Equal Inspection Chamber Base 600mm dia. base with bent 30 channel and single inlet NE mm Restriction Access Cap Restricts access to 350mm NOW UPDATED FOR SfA7! Accessories and spares are available for all ranges. Civils and Drainage Solutions The Essential Guide Plastic Drainage 115
Product and Installation Guide
Uniclass CI/SfB Feb 2005 L7314:P71 (52.5) In6 TW203 EPIC J3413:X71 TwinWall Surface & Storm Water Drainage System Product and Installation Guide FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS Intelligent Solutions
More informationProduct guide. TwinWall. Surface and Stormwater Drainage
Product guide Surface and Stormwater Drainage Contents Introduction 2-3 Product Details 4-12 Jointing 13 General Information 14-15 Notes 16 www.wavin.co.uk Email: technical.design@wavin.co.uk Surface and
More informationWavin: Range 600 Inspection Chambers
Uniclass EPIC G632:G581 JR12 CI/SfB (52.7) In6 August 2013 WP004 J34 Wavin: Range 600 Inspection Chambers Product Technical Guide Solutions for Essentials Contents Foul water Surface water Indicates where
More informationAdoptable and Non-Adoptable Assemblies.
Access and Inspection Chambers Adoptable and Non-Adoptable Assemblies www.brettmartin.com New render DRAINAGE PLUMBING RAINWATER ROOFING DRAINAGE PLUMBING DRAINAGE SYSTEMS Brett Martin s Plumbing and Drainage
More informationDRAFT. Draft Bill of Quantities. Drainage
Draft Bill of Quantities September 2015 STORM DRAINAGE INFORMATION Measurement notes Drawings used : WYG (80) 140 Rev T1, D-(80) 001 Rev T1, D-(80) 002 Rev T1, D-(80) 003 Rev T1 and D-(80) 004 Rev T1 All
More informationBelow Ground Drainage, Water Supply, Utilities & Insulation
PBGTPL2 FEBRUARY 2017 EFFECTIVE: 6th FEBRUARY 2017 Below Ground Drainage, Water Supply, Utilities & Insulation Trade List 2017 Polypipe Welcome to Polypipe At Polypipe, conceiving, designing, manufacturing
More informationHepworth SuperSleve Drainage Specification
Hepworth SuperSleve Drainage Specification Client name Date - Site address 1 Manufacturer details Wavin Limited, Edlington Lane, Edlington, Doncaster, DN12 1BY T: 0844 856 5165 E: drainage@hepworth.co.uk
More information7.00 MANHOLES AND INSPECTION CHAMBERS. Hunter Underground Systems
7.00 MANHOLES AND INSPECTION CHAMBERS Hunter Underground Systems 7.01 Access to drains 7.02 preformed plastic Inspection Chambers 7.03 Manholes 7.04 450mm diameter inspection chambers Equal 110mm inspection
More informationULTRA3 UNDERGROUND DRAINAGE
Contact JDP Inverness Aberdeen Oban Edinburgh Glasgow Carlisle Birtley Skipton Knottingley Ellesmere Port Manchester Alfreton Wednesbury Northampton Norwich Colchester Cambridge Portsmouth Ashford Berkhamsted
More informationBS EN :1998. Fittings Description Dia mm Code. Equal Junction. Double Socket
BS EN 1401-1:1998 PlastiDrain PlastiDrain is a plastic gravity drainage system designed for both foul and surface water applications in housing, industrial, commercial and highway drainage. PlastiDrain
More informationbuilding the future PVC-UE Roofline, Window & Cladding Systems Soil & Waste Systems Underground Drainage Systems Rainwater Systems
building the future Underground Drainage PVC-UE Roofline, Window & Cladding Rainwater Soil & Waste Underground Drainage Hot & Cold Plumbing HIGH QUALITY UNDERGROUND DRAINAGE SYSTEM FloPlast are an established
More informationOSMADRAIN UNDERGROUND DRAINAGE SYSTEM OSMADRAIN UNIVERSAL GULLY SYSTEM
Wavin UK (Holdings) Ltd Parsonage Way Chippenham Wiltshire SN15 5PN Tel: 01249 654121 Fax: 01249 443286 e-mail: info@wavin.co.uk website: www.wavin.co.uk APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL
More informationUNDERGROUND DRAIN, SEWER, SURFACE WATER & DUCT
www.brettmartin.com UNDERGROUND DRAIN, SEWER, SURFACE WATER & DUCT QUALITY UNDERGROUND SYSTEMS When you select an underground system you need to be sure of its pedigree, convinced of its ability to perform,
More informationPolysewer Gravity Sewer System SPECIFICATION
Polysewer Gravity Sewer System SPECIFICATION July 2014 SCOPE OF WORKS To meet the specific performance criteria detailed within this specification and accompanying drawings. The completed drainage systems
More informationRodding Eye Details. Inspection Chambers
Rodding Eye Details Inspection Chambers 1 2 Deep Inspection Chambers BS7158:2001 Installation Procedures 1. Excavate to the required depth for the Polypipe Non Man Entry Deep Inspection Chamber system
More informationG632:G581 JR12 CI/SfB (52.7) In6 June 2015 OWIC001. Water management PRODUCT AND INSTALLATION MANUAL. Wavin. Inspection Chambers
Water management PROUT N INSTLLTION MNUL Uniclass EPI G632:G581 JR12 I/Sf (52.7) In6 June 2015 OWI001 J34 Inspection hambers Wavin Inspection hambers ontents Osma/Wavin hambers Introduction 2 The Osma/Wavin
More informationBelow Ground. Trade Price list. marleypd.co.uk MAY 2016
Below Ground Trade Price list MAY 2016 marleypd.co.uk Contents Underground Product selector... 3... 4-9... 9-11 Large diameter quantum highway... 12-13 Ancillary items... 13 Flowloc control device... 14
More informationCPM Concrete Drainage Systems
CPM Group Ltd offer a complete range of precast concrete manhole units from DN 900 to DN 4000 in varying depths with tongue and groove joints. A djusting units Ductile iron cover & frame Cover slab DN1200
More informationOsma UltraRib System:
Uniclass EPI JR12 L21721 P7114 J344 X725 I/Sf (52.3) In6 June 2014 UR102 Osma UltraRib System: Product and Installation Guide Solutions for Essentials ontents Introduction The Osma UltraRib System 4 Material
More informationDensleeve. Description. Specification. Availability. 2 Tel: Fax:
The Naylor ensleeve underground drainage system of plain-end vitrified clay pipes and fittings with flexible sleeve couplings, was developed for building drainage and associated sewerage and is all manufactured
More informationAgrément Certificate 89/2206 website: Product Sheet 6
Polypipe Ltd t/a Polypipe Building Products Broomhouse Lane Edlington Doncaster DN12 1ES Tel: 01709 770000 Fax: 01709 770001 British Board of Agrément Bucknalls Lane Watford Herts WD25 9BA 2017 Page 1
More informationIntegrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
More informationProduct and installation manual. UltraRib. Foul and Surface Water Drainage
Product and installation manual UltraRib Foul and Surface Water Drainage Contents Introduction 2 The System 2 Material 2 Standards 2 cceptance 2 Pipe and Joint Technology 3 General Information 4 Weights
More informationInstallation Instructions for Perfect Manhole System DN 1200 DN PD 71 rev B 31/01/12
Installation Instructions for Perfect Manhole System DN 1200 DN 1500 31/01/12 Page 1 of 10 Stanton Bonna Manhole System gives a complete Invert to Slab watertight manhole system with a design life of 120
More informationSIROPLAST-K. Pipe system for civil engineering subsoil drainage inspection chambers and subsoil drainage pipes to DIN
HEGLER II/1 Pipe system for civil engineering subsoil drainage inspection chambers and subsoil drainage pipes to DIN 4262-1 : Pipe system consisting of inspection chambers and subsoil drainage pipes. Twin
More informationRidgidrain NBS Specification
Ridgidrain NBS Specification July 2014 R12 DRAINAGE BELOW GROUND Polypipe Civils, Charnwood Business Park, North Road, Loughborough, Leicestershire, LE11 1LE. Tel: +44 (0)1509 615 100. Fax: 01509 610 215.
More informationPerfect Manhole Installation Manual May 2012 Rev 8 Perfect Manhole System Precast concrete manholes with load bearing elastomeric joints
Perfect Manhole System Precast concrete manholes with load bearing elastomeric joints Installation Manual 1 1 Introduction This manual gives guidance on how to install the CPM Group Perfect manhole system
More informationPerfect Manhole System Precast concrete manholes with load bearing elastomeric joints Installation Manual
Perfect Manhole System Precast concrete manholes with load bearing elastomeric joints Installation Manual 1 1 Introduction This manual gives guidance on how to install the Marshalls CPM Perfect manhole
More informationRegulations Detail Sheet 1
Electronic Copy Polypipe Building Products Ltd Broomhouse Lane Edlington Doncaster South Yorkshire DN12 1ES Tel: 01709 770000 Fax: 01709 770001 CI/SfB (52) In6 Agrément Certificate No 02/3923 Designated
More informationTerrain HDPE. Product Guide
TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other
More informationTerrain Drainage Systems
Uniclass L731:P71 CI/SfB TDTPL12-PT (52) In6 February 2018 Terrain Drainage Systems Trade List Terrain Drainage Welcome to Polypipe At Polypipe, conceiving, designing, manufacturing and delivering the
More informationTerrain Drainage Systems
Uniclass L731:P71 CI/SfB TDTPL12-PT (52) In6 February 2018 Terrain Drainage Systems Trade List Terrain Drainage Welcome to Polypipe At Polypipe, conceiving, designing, manufacturing and delivering the
More informationULTRARIB GRAVITY DRAINAGE AND SEWERAGE SYSTEM. WAVIN ULTRARIB 150 mm, 225 mm AND 300 mm INTERNAL DIAMETER PIPES AND FITTINGS
HPS Roads and ridges Wavin Plastics Limited Parsonage Way Chippenham Wiltshire SN15 5PN Tel: 01249 766600 Fax: 01249 443286 e-mail: info@wavin.co.uk website: www.wavin.co.uk ULTRRI GRVITY DRINGE ND SEWERGE
More informationSANITARY WASTE AND VENT PIPING
SECTION 15420 - SANITARY WASTE AND VENT PIPING PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationMetro Drain & N-Drain
Metro Drain & DN100-00 Twinwall Drainage Systems e m a i l : s a l e s @ n a y l o r. c o. u k w e b : w w w. n a y l o r. c o. u k Winners - Growing Business The MANUFACTURING EXCELLENCE Awards Winner
More informationBelow ground System of pipework required to carry waste fluids from building to disposal site.
1 Below ground System of pipework required to carry waste fluids from building to disposal site. Disposal site County Council sewage treatment facility. Septic tank system or alternative systems 2 1. Layout
More informationShower and Floor Gullies SECTION
Shower and Floor Gullies SECTION Shower and Floor Gullies 9 General Information McAlpine has responded to market conditions and customer demand by producing an extensive range of Shower and Floor Gullies
More informationG632:G77 JR12/JR13 A16 J34 X71 CI/SfB (52.7) In6 (Y2) June 2015 OD107. Waste water drainage PRODUCT AND INSTALLATION MANUAL.
Waste water drainage PRODUT ND INSTLLTION MNUL Uniclass EPI G632:G77 JR12/JR13 16 J34 X71 I/Sf (52.7) In6 (Y2) June 2015 OD107 Drainage ontents Introduction 2 The System 2 Material 2 Standards 2 cceptance
More informationProduct. Department of Transport Requirements. Marley Extrusions Ltd Lenham Nr Maidstone Kent ME17 2DE Tel: Fax:
CI/SfB (52) In6 Marley Extrusions Ltd Lenham Nr Maidstone Kent ME17 2DE Tel: 01622 858888 Fax: 01622 858725 Roads and Bridges Agrément Certificate No 92/R070 Second issue* Designated by Government to issue
More informationInstallation Procedure FP McCann DN1050 Easi-Pit
Installation Procedure FP McCann DN1050 Easi-Pit This document describes the recommended procedure for the installation of FP McCann Easi- Pit DN1050 Precast Concrete Catch-Pit, used in manhole construction
More informationPVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe
Design and Installation Guide PVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe TABLE OF CONTENTS Introduction 2 Products 3 Main-Line Fittings & Service-Line Fittings 3-4 Connections to Dissimilar
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1413 FACILITY STORM DRAINAGE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationA. This Section includes sanitary waste and vent piping inside the building and to locations indicated.
SECTION 221316 SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationInstallation Overview
Installation Overview Access Cover & Frame See page 6 for detail Cover Supports Hardwood, Concrete or Galvanised Angle 225mm PVC Push On Cap Code: 750191 Shroud Code: 750138 225mm PVC Extension Pipe Cut
More informationFor more information on ACO Drain visit
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) Heavy duty channel drainage system ACO S Range ACO S Range CHANNEL DRAINS Load Class BS EN 1433:2002 Optimum solution The ACO S Range is an interconnecting
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationR10 RAINWATER DRAINAGE SYSTEMS
R10 RAINWATER DRAINAGE SYSTEMS To be read with Preliminaries/General conditions. GENERAL INFORMATION/REQUIREMENTS 110 GRAVITY RAINWATER DRAINAGE SYSTEM - Rainwater outlets: Proprietary (see clause 365)
More informationCI/SfB (52.5) X June 2008 CH301. Domestic Channel Drainage Systems. Product Guide
Uniclass L7315 CI/SfB (52.5) X June 2008 CH301 EPIC J3413 Domestic Channel Drainage Systems Product Guide Domestic Channel Drainage Systems The Hepworth range of domestic linear drainage products offers
More informationACO Building Drainage
ACO Building Drainage Backflow systems Installation, Operation and Maintenance Manual ACO TRIPLEX Anti-flood valve for GREYWATER drainage (wastewater without sewage) PLEASE READ THESE INSTRUCTIONS BEFORE
More informationA reliable solution for ditching, underpassing and rainwater drainage
PIPES AND CHAMBERS CULVERT PIPES A reliable solution for ditching, underpassing and rainwater drainage Culvert pipes are used to convey drain pipe water or rainwater under the ground. The smallest (110
More informationSECTION STORM UTILITY DRAINAGE PIPING PART 1 - GENERAL 1.1 SUMMARY 1.2 SUBMITTALS 1.3 PROJECT CONDITIONS
SECTION 334100 - STORM UTILITY DRAINAGE PIPING PART 1 - GENERAL 1.1 SUMMARY Section Includes: 1. Pipe and fittings. 2. Drain Basin. 3. De-chlorination tablet feeder. 4. Non-pressure transition couplings.
More informationDRAINAGE SYSTEMS FOR BELOW GROUND
DRAINAGE SYSTEMS FOR BELOW GROUND STAINLESS STEEL DRAINAGE SYSTEMS BELOW GROUND BLÜCHER EuroPipe is the ideal drainage system for belowground use. The stainless steel systems offers the specifier and
More informationH A P A S Roads and Bridges Agrément Certificate No 02/H068 Second issue*
Designated by Government to issue European Technical Approvals Polypipe Civils Ltd Union Works Bishop Meadow Road Loughborough Leicestershire LE11 5RE Tel: 01509 615100 Fax: 01509 265945 RIDGIDRAIN ADVANCED
More informationSECTION (15150) - SANITARY WASTE AND VENT PIPING
SECTION 22 13 16 (15150) - SANITARY WASTE AND VENT PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Pipe Materials. 2. Fittings. 3. Joining Materials. B. Related Sections: 1.02 REFERENCES 1.
More informationt y p e V S A S E W A G E P U M P
Pe r fo r m a n ce C h a r t 65 6 55 45 4 35 3 25 2 12 11 1 / 2 11 1 1 / 2 1 9 1 / 2 6% 7% 76% 7 1 HP 1/2 HP HP 76% 7% 6% C u r v e P a g e V S A - 5 1 1 5 R P M M O D E L : V S A - 6 H D I S C H A R G
More informationSECTION FACILITY SANITARY SEWERS
SECTION 22 13 13 FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSPECIFICATION FOR PIPE CULVERT CONSTRUCTION
SPECIFICATION FOR PIPE CULVERT CONSTRUCTION 1. SCOPE Pipe culverts shall be constructed in accordance with this specification and in conformity with the lines, levels and cross-sections shown on the drawings.
More informationcomponent developments Stainless Steel Industrial Floor Drainage
component developments Stainless Steel Industrial Floor Drainage Component Developments What we do We design, manufacture and supply standard, adapted and bespoke stainless steel building products. We
More informationProduct, Design and Installation Guide. Rainwater Systems FOR RESIDENTIAL, COMMERCIAL AND INDUSTRIAL APPLICATIONS
Uniclass JR11 L7313 CI/Sf (52.6) In6 February 2007 RW109 EPIC 52 X71 Rainwater Systems Product, Design and Installation Guide FOR RESIDENTIL, COMMERCIL ND INDUSTRIL PPLICTIONS Intelligent Solutions for
More informationL7315+L21233 J342 X2. CI/SfB (52.5) If9 FOR RESIDENTIAL AND LIGHT COMMERCIAL APPLICATIONS
Uniclass EPIC L7315+L21233 J342 X2 CI/SfB July 4 (52.5) If9 CH301 Channel Drainage Systems Product Guide FOR RESIDENTIAL AND LIGHT COMMERCIAL APPLICATIONS Intelligent Solutions for Below Ground Projects
More informationSelection & Installation
Rev. June 2006 W0036/05 Rainwater Systems Selection & Installation 3 identify your OSMA the brand you can trust OSMA Rainwater Systems from Wavin offer you more. They give you more than just outstanding,
More informationBridge Drainage Systems
Bridge Drainage Systems 2 Bridge drains made of cast iron, durable and reliable in use 3 One of the most important preconditions for the perfect functioning of bridge structures is the fast drainage of
More informationUponor Ltd Aycliffe Industrial Estate Newton Aycliffe Co Durham DL5 6EA Tel: Fax:
CI/SfB (52) In6 Uponor td Aycliffe Industrial Estate Newton Aycliffe Co urham 5 6EA Tel: 01325 300010 Fax: 01325 321307 Roads and Bridges Agrément Certificate No 89/R044 Third issue* esignated by Government
More informationCI/SfB Oct 12 (52.5) Uniclass L7314
CI/SfB Oct 12 (52.5) Uniclass L7314 Bailey Flow-therm Product Selector A RANGE OF QUALITY AND ROBUST RAINWATER OUTLET AND VENTILATION SYSTEMS FOR FLAT ROOFS, MANUFACTURED FROM RIGID POLYURETHANE. Bailey
More informationSummary of the 2011 Changes
The following is a list of amendments to the Residential Site Improvement s, N.J.A.C. 5:21, adopted in 2011. The Notice of Adoption of these changes appeared in the New Jersey Register on May 16, 2011.
More informationDRAINAGE SYSTEMS.
www.brettmartin.com DRAINAGE SYSTEMS DRAINAGE SYSTEMS Brett Martin s Plumbing and Drainage range has earned a reputation for quality and performance. The largest independent building products manufacturer
More informationVSS S U B M E R S I B L E S E W A G E P U M P S
7 2 9 8 / 2 3 HP % % 64% 7 5 HP HP 5 HP % % C u r v e P a g e V S S - 4 5 R P M M O D E L : V S S - 4 E I M P E L L E R : V S A - 4 C - 2-5 A l s o a p p l i e s t o V S S - 5 E & V S S - 6 E 7 7 65 55
More informationStandard products Tasmania 2010
Standard products Tasmania 2010 Standard products A catalogue of standard products manufactured at Humes Invermay. All products are cast with means of lifting unless otherwise specified. Other products
More informationNELSON CITY COUNCIL INFRASTRUCTURAL ASSETS SD 601 APPROVED SENIOR EXECUTIVE INFRASTRUCTURE
SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 601 SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 602 SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 603 SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 604 NOTES 1. PRE-FORMED PLASTIC
More informationCI/SfB Oct 12 (52.5) Uniclass L7314
CI/SfB Oct 12 (52.5) Uniclass L7314 Bailey Flow-therm Product Selector A RANGE OF QUALITY AND ROBUST RAINWATER OUTLET AND VENTILATION SYSTEMS FOR FLAT ROOFS, MANUFACTURED FROM RIGID POLYURETHANE. Bailey
More informationDaytona Beach Pier Building Renovation Jun 2010
SECTION 15150 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationONE PIPE LENGTH MAX (REFER TO 1/4"/FT SLOPE (MIN) 5'-0" (MIN) OR 4" LATERAL NOTE #1) INCREASER RIGHT-OF-WAY/ 4"x6" REFER TO TYPICAL EXCAVATION,
VENT CAP (MUSHROOM TYPE) SOLID CAP EXIST GRADE MIN BUILDING REFER TO NOTE #4 MIN CONCRETE SIDEWALK CURB OR EDGE OF SIDEWALK STREET CLEANOUT (REFER TO NOTE #3) VENT PIPE 4" PVC 6" PVC CLEANOUT CONCRETE
More informationWAVIN ROAD GULLIES. Date of First issue: 16 April 2014 Brian Chamberlain Claire Curtis-Thomas
HAPAS Wavin Ltd Parsonage Way Chippenham Wiltshire SN15 5PN Tel: 01249 766600 Fax: 01249 443286 e-mail: info@wavin.co.uk website: www.wavin.co.uk WAVIN ROAD GULLIES APPROVAL INSPECTION TESTING CERTIFICATION
More informationInfiltration and Attenuation Systems Product and Installation Guide
Uniclass JR12/JS10 L731/L71121/L2123 CI/SfB (52.5) (90.51) May 2009/rev February 2010 WM424 EPIC J3413 X721 Intelligent stormwater solutions by Wavin Infiltration and Attenuation Systems Product and Installation
More informationList of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION
List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION EN 295-1 Part 1: Requirements for pipes, fittings and joints Vitrified
More informationBirco. Water Linear Management Drainage Design Guide Birco Introduction Linear Drainage Channel. Grate Drainage System
Birco Grate Drainage System Robust and durable. Proven and trusted. Low to high capacity. Wide range of channels and gratings. Constant and inbuilt fall channels. Manufactured in accordance with BS EN
More informationPRECAST RECTANGULAR CHAMBERS
STANDARD MODELS GENERAL ROUGH SKETCH Available for: Sewer manhole, valve chamber, trouser manhole, and pumping station. Ø60-Ø762 ADJUSTMENT RING 7-00-2-0 20-2 30-60 RING 200-30 60-60 000-220 9ø 6 FLAT
More informationTITLE: SLAUGHTER HOUSE SEPTIC TANK. ITEM No. D E S C R I P T I O N UNIT QTY
D DEMOLITION & SITE CLEARANCE D1 GENERAL CLEARANCE 6-D152 Open bush and thicket in and around ha 0.02 the ponds. Locally disposed. D2 REMOVAL OF TREES AND STUMPS 6-D212 Trees of girth: 150 mm - 500 mm
More informationPowerDrain Section. Technical Handbook and Product Catalog. Heavy duty trench drainage
Technical Handbook and Product Catalog Surface Drainage 6 Surface drainage options 8 Product selection 10 Trench drain hydraulics 16 Loadings 22 Material data 24 End user requirements Standard Products
More informationJR12:L731/L71121/L2123 J3413:X721 CI/SfB (52.5) (H1) October 2015 WM424. Water management PRODUCT AND INSTALLATION MANUAL.
Water management PRODUCT AND INSTALLATION MANUAL Uniclass EPIC JR12:L731/L71121/L2123 J3413:X721 CI/SfB (52.5) (H1) October 2015 WM424 AquaCell Systems Contents AquaCell Systems Overview 2 Principal Components
More informationDrexus Pave Drain. Linear Channel. Water Management. Water Linear Management Drainage Design Guide Drexus Pave Drain Linear Drainage Channel
Linear Channel Water Management Linear Channel Drexus Pave Drain Textured Silver Grey Textured Charcoal Textured Buff D400 Yorkstone, Scoutmoor Mid Grey Granite Silver Grey Granite Drexus Pave Drain Concrete
More informationKhalid SINCE 1997 TECHNICAL MANUAL 2017 GRP MANHOLE LINER & ACCESSORIES
Khalid SINCE 1997 TECHNICAL MANUAL 2017 GRP MANHOLE LINER & ACCESSORIES KPIC - GRP MANHOLE LINER GRP manhole liner & accessories are made of KPIC GRP pipes as integral part of pipe installations. Their
More informationPERMANENT PAVEMENT REPAIR NO SCALE
SAWCUT EXISTING PAVEMENT 2" BITUMINOUS CONCRETE SURFACE COURSE, CLASS 2 (MIN) CLEAN EDGE PRIOR TO PAVING AND PAINT WITH LIQUID BITUMEN. INSTALL SEALANT OVER JOINT UPON COMPLETION 2" BITUMINOUS CONCRETE
More informationUltimate Pipeline Systems POWER PLASTIC FACTORY LLC.
Ultimate Pipeline Systems POWER PLASTIC FACTORY LLC e-mail: powerbmm@emirates.net.ae www.powergroups.ae Disclaimer All information in this catalogue is correct to our best of knowledge at the time of preparation.
More informationCONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 602 MARCH 1993 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER 602.01 SCOPE 602.02 REFERENCES 602.05 MATERIALS TABLE OF CONTENTS
More informationDUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
More information112mm. 117x75mm Polyflow. 130x70mm Ogee 68mm Round 65mm Square. 112mm Half Round 68mm Round. 65mm. Round. 112mm. 117x75mm Polyflow
Gutter and Systems A comprehensive range of fittings accompanies each rainwater profile in Polypipes unrivalled product range, to provide the specifier and installer with a complete roof drainage solution.
More informationWavin AS Acoustic Soil System
Waste water drainage PRODUCT AND INSTALLATION MANUAL Uniclass EPIC L73131:P7110 J344:X721 CI/SfB (52.3) (In6) October 2015 SW216 Acoustic Soil System Contents Introduction 2 Sound Insulation 3 Design and
More informationApproved Document. Drainage and waste disposal. The Building Regulations 2010
The Building Regulations 2010 Approved Document H1 Foul water drainage H2 Wastewater treatment systems and cesspools H3 Rainwater drainage H4 Building over sewers H5 Separate systems of drainage H6 Solid
More information11/30/12 T.P V1.0. Pipex px Product Group: Manholes, Chambers & Tanks Pipex px Product Type: Combined Sewer Overflow CSO
Pipex px Product Group: Manholes, Chambers & Tanks Pipex px Product Type: Combined Sewer Overflow CSO Pipex px Specification: PX-MH-SP-E.01 Pipex px Combined Sewer Overflow (CSO) Chamber Bespoke Combined
More informationDrainage & Plumbing Systems
Tata Steel International (Australasia) Ltd Drainage & Plumbing Systems Stainless Steel Section G Jan 13 Tata Steel International (Australasia) Ltd Head Office 7 Bruce Roderick Drive PO Box 58880, Botany,
More informationAWASHAFT DN400. Product and Installation Guide
AWASHAFT DN400 Product and Installation Guide AWASHAFT DN400 Safety for generations The AWASHAFT DN400 is a cleaning, inspection and transfer chamber for installation in private or municipal sewerage or
More informationIndependent certification of your products & services. 2.2 Relevant Standards 1. SCOPE
1. SCOPE This schedule specifies requirements for the AquaSpira CSR (Composite Steel Reinforced) pipe system as manufactured by AquaSpira Limited. It is applicable for underground gravity drains, sewer
More informationPRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
04 05 PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES Over floor trunking 0 300 9 0 300 93 0 38 00 Conform to standard EN 50085-- For creating a link between trunking, column,
More informationDesign. Introduction. Our Commitment to Specifiers. Section 9 Page 1
Introduction Our Commitment to Specifiers Section 9 Page 1 Layout This drawing has been prepared only for the purpose of demonstrating Hepworth Clay Drainage systems. 225 Ø 225 Ø 225 Ø svp g ag ss g aav
More informationPluvia Product and Installation Guide
Pluvia Product and Installation Guide Valid from 1. April 2013 Siphonic System Elements Guide All Geberit Pluvia rainwater systems in the UK and Ireland are installed by fully trained Approved Installers,
More informationRIDGIDRAIN ADVANCED DRAINAGE SYSTEM PRODUCT SHEET 1 RIDGIDRAIN PLUS AND RIDGIDRAIN 100 MM TO 600 MM PIPES AND COUPLERS
Polypipe Civils Ltd Charnwood Business Park North Road Loughborough Leicestershire LE11 1LE Tel: 01509 615100 Fax: 01509 265945 e-mail: civilssales@polypipecivils.com website: www.polypipe.com Agrément
More informationUniversity of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 14 00 _STORM WATER PIPING SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Storm water piping 2. Roof drains. 3. Area
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 02630 - STORM DRAINAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationPRODUCT GUIDE PLUMBING. February 2017 BRETT MARTIN PLUMBING SYSTEMS PRODUCT RANGE INSTALLATION DETAILS PLUMBING SYSTEMS
February 2017 BRETT MARTIN PLUMBING SYSTEMS PRODUCT RANGE INSTALLATION DETAILS PLUMBING SYSTEMS PLUMBING P R O D U C T G U I D E Brett Martin is a multi-site international organisation producing not only
More information