Precision HSS Connection System For Modular Buildings. Entire contents protected by Copyright. US and International Patents Pending
|
|
- Darrell Thompson
- 6 years ago
- Views:
Transcription
1 Precision HSS Connection System For Modular Buildings by Entire contents protected by Copyright. US and International Patents Pending
2 Stacked and Bundled Vectorbloc Systems Explained! Entire contents copyright February 2015 Vectorbloc and related systems US, Canada and WIPO Patent pending
3 Because loads in a building vary, Vectorblocs are designed to support a wide range of column configurations This means that the minimum of steel and labour can be used to build a member which suits specific load conditions Each bolt in the standard connector series has a clamping strength of 60kips, so a group of 8 delivers over 400 kips, adequate for buildings well over 30 stories
4 Vectorbloc offers two ways to build modules, which we call Stacked and Bundled. The stacked system scales with load using modules with progressively larger HSS, while the bundled system adds horizontal tiers of HSS in ever wider assemblies. These wide assemblies also function as shear walls. Top: Stacked Bottom: Bundled Vector Praxis production office
5 The two systems are interchangeable, so designers can select the connection and member configuration that best suits each project, or even each part of a project.
6 Stacked Typical details
7 Typical transition block 4 x 4 to 6 x 6
8 The structural bundling of columns is similar to the story of the boy who was challenged to break a bundle of sticks and found it impossible because a group of members acting together are stronger than the sum of the parts..
9 Robust groupings can be created using one size of HSS welded corner to corner and joined in groups with flat-bar ears.
10 Bundled Typical details
11 Bundled Typical details
12 A Vectorbloc building designer using FEA software selects the column configuration that best suits the loading on each module. Section transitions
13 By joining bundled columns in adjacent modules, configurations ranging from a 24 lbs / foot grouping of 4 x 4 HSS, to massive built-up columns weighing over 400 lbs per foot, can all fit in a 10-1/2 wall
14 Vectorbloc Concept Building February 2015 Vectorbloc and related systems US, Canada and WIPO Patent pending
15 By examining a Vectorbloc-based concept building we can better understand the practical application of the Vectorbloc structural system
16 Vectorbloc concept building: Renders
17 Apartment buildings and condominiums are highly optimized and every square foot is utilized. Vectorbloc s bundled column reduces lost GFA by packing load-bearing structures in to the wall cavities, eliminating inconvenient bumpouts Plan of typical floor
18 Lateral brace frames (blue) are concentrated in the party walls, while the longitudinal system (pink) is loaded in to areas where the diagonal bracing does not obstruct openings Brace locations
19 Minimizing module size variants is not essential, but it is desirable Module size matrix
20 Vectorbloc sectional frame elevations showing conventionallyconstructed parking structure, podium and transfer beams
21 Vectorbloc Frame
22 Typical twomodule grouping
23 Typical two module grouping with finishes and furnishings
24 Typical single module frame construction
25 The brace frame is created when modules are interconnected to unite the integral diagonal bracing in the modules. Bracing can be integrated in locations such as the party walls, elevator shafts and stairwells.
26 Lateral Frame
27 Deep spandrel beams can be integrated in to the framing if required to eliminate diagonal bracing which obstructs openings Frame Details
28 The longitudinal brace frame is created on the upper floors by interconnecting modules to combine the moment action of the module frames. On lower floors, bracing is added to the shaft, stairwell and hallway modules. Longitudinal Frame
29 Vectorbloc modules incorporate the ideal vertical load bearing capacity at each level in the building, they provide a moment connection and they are interconnected connected horizontally. As a result, a separate brace frame or brace tower can be eliminated, saving valuable space and reducing construction complexity.
30 Vectorbloc Prototypes 3D Printing Casting and Machining February 2015 Vectorbloc and related systems US, Canada and WIPO Patent pending
31 Investment casting and machining
32 Checks of material quality, alignment and dimensions
33 Complete prototype of typical connection with cutaways
34 Prototype of typical module with detail of fireproofing and baseboard leave-out at Vectorbloc connection
35 Vectorbloc The sky s the limit Links to chatter about Vectorbloc and related subjects: comments/can_vectorblocs_patented_buildi ng_system_make_cities_more_energy_effic ient#.vcxab_ldu9j cated-broadway-stack-project-makes-headway/ -dispute-over-stalled-modular-tower.html
36 Disclaimer The Vectorbloc, Vectorig, Vectorloc, Vectorjig and Vectorsight systems, together with all derivatives and related consulting services (collectively the Vectorbloc Modular Construction System) are not standalone, pre-engineered and pre-qualified systems that can be used without the input, supervision and approval of professionals with appropriate experience and qualifications and who are licensed and insured in the applicable jurisdiction. It is the sole responsibility of the purchaser and / or user to determine the applicability of the system and its components and derivatives for any application. Prior to conceiving, designing, fabricating or erecting a structure of any kind using any of the above noted systems or their derivatives, the user must contract the services of any and all third-party licensed architects, engineers and all other professionals such as code consultants, welding inspectors and mechanical designers as may be required to properly conceive, design, engineer, erect and supervise work on the structure. Additionally, it is the responsibility of the user to determine what laws, standards and building codes apply to a project before, during and following construction and to seek and obtain all applicable evaluations, inspections and approvals required by all authorities and entities having jurisdiction. In this context the images and descriptions of the Vectorbloc Modular Construction System provided by Vector Praxis, its principals, employees, agents and subcontractors are entirely conceptual in nature. Vector Praxis makes no warranty for the fitness of the Vectorbloc Modular Construction System for any application and both Vector Praxis and its insurers disclaim all liability for the use of the Vectorbloc Modular Construction System by any user. Entire contents protected by Copyright US and International Patents Pending END
Scalable Precision Modular Construction System
Scalable Precision Modular Construction System January 2016 Entire contents protected by Copyright. US and International Patents Pending Contents 1. About VectorBloc and Atlas / JMC 2. Tolerances and scale
More informationFrameFast Shoring System
FrameFast FrameFast Shoring System The FrameFast shoring system is engineered for maximum strength, labor productivity and reuse capabilities. FrameFast components feature high strengthto-weight ratios.
More informationSTRUCTURAL STEEL FRAMING
SECTION 05 12 00 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Section includes 1. Structural steel framing 2. Structural steel framing required for support and framing of rooftop mechanical
More informationStructural Design Challenges of Merdeka PNB118, Kuala Lumpur, Malaysia
Structural Design Challenges of Merdeka PNB118, Kuala Lumpur, Malaysia SawTeen See, Managing Partner, Leslie E. Robertson Associates Simon Cloherty, Principal, Robert Bird Group MERDEKA PNB118 STRUCTURAL
More informationSTATE UNIVERSITY CONSTRUCTION FUND. UNIVERSITY CON DIRECTIVE 5-1 Issue date: October 2014
STATE STRUCTION FUND DIRECTIVE 5-1 Issue date: October 2014 STRUCTURAL STEEL 1. General: It is the Fund's policy that the design of the structural steel is the prime responsibility of the project's Structural
More informationStandard Duty Cantilever Rack Installation and Assembly Guide
Standard Duty Cantilever Rack Installation and Assembly Guide Steel King Industries, Inc. 2700 Chamber St Stevens Pont, WI 54481 (800) 826 0203 www.steelking.com info@steelking.com ASSEMBLY INSTRUCTIONS:
More informationWOOD I-JOIST AWARENESS GUIDE
WOOD I-JOIST AWARENESS GUIDE American Wood Council Flange Web Flange American Forest & Paper Association WOOD I-JOIST AWARENESS GUIDE The American Wood Council is part of the wood products group of the
More informationTG Structural Steel Superstructure
TG07.1 - Structural Steel Superstructure Questions are numbered in the order received. Numbers missing in the sequence have been answered in previous response sets. Question 0149 2.11.2013 1. Please reference
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 052100 - STEEL JOISTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections
More informationENTRY FORM. DVASE 2014 Excellence in Structural Engineering Awards Program
ENTRY FORM DVASE 2014 Excellence in Structural Engineering Awards Program PROJECT CATEGORY (check one): Buildings under $2M Buildings Over $100M Buildings $2M-$10M Other Structures Under $5M Buildings
More informationOn Cold-Formed Steel Construction. Light Gauge Steel Engineers Association Washington, D.C Toll Free (866)
TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Light Gauge Steel Engineers Association Washington, D.C. 20005 Toll Free (866) 465-4732 www.lgsea.com DESIGN OF BY-PASS SLIP CONNECTORS IN COLD-FORMED
More informationStructural Technical Report #2 By Robert Whitaker
Structural Technical Report #2 By Robert Whitaker Robert Whitaker Structural ~ Parfitt Parkview at Bloomfield Station Bloomfield, NJ 10-31-05 Executive Summary This report covers the comparative redesign
More informationSteel Forming System BROCHURE. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. Max-A-Form System Design The Max-A-Form Forming System combines
More informationSpring Hill Suites Marriott
Spring Hill Suites Marriott Project Location: Amarillo, TX Prepared for: Girder Slab Technologies Contact: Daniel Fisher, Sr. January 15, 2008 Prepared by: Monica Stockmann Regional Engineer: Erika Winters-Downey
More informationMansfield University Dormitories Mansfield, Pennsylvania
Mansfield University Dormitories Mansfield, Pennsylvania Michael Mahoney Construction Option Senior Thesis Presentation 2013 The Pennsylvania State University II. III. IV. Modular Setting Precision Project
More informationSTRUCTURAL STEEL INSPECTION
STRUCTURAL STEEL INSPECTION Doug Beer, P.E. Bridge Division Construction and Maintenance September 26, 2018 Structural Steel Welded Field Splices Diaphragm Welding Shear Connectors Bolted Splices Steel
More informationITEM 555 CHAIN LINK FENCING
ITEM 555 AFTER MARCH 1, 2012 CHAIN LINK FENCING 555.1 Description. This item shall govern for furnishing the quantities of chain link fencing and gates as shown on the plans, including all posts, bracing
More informationMOUNTAIN STATE BLUE CROSS BLUE SHIELD HEADQUARTERS
MOUNTAIN STATE BLUE CROSS BLUE SHIELD HEADQUARTERS PARKERSBURG, WEST VIRGINIA DOMINIC MANNO STRUCTURAL OPTION FACULTY CONSULTANT: DR. ANDRES LEPAGE Technical Report 3 11-21-08 TABLE OF CONTENTS TABLE OF
More informationGUIDE SPECIFICATIONS CURA ADJUSTABLE REROOF FRAMING SYSTEMS SECTION REROOFING ADJUSTABLE FRAMING SYSTEM
- --- -- ----..-------~------------------------------------ GUIDE SPECIFICATIONS CURA ADJUSTABLE REROOF FRAMING SYSTEMS SECTION 07415 REROOFING ADJUSTABLE FRAMING SYSTEM PART 1 - GENERAL 1.01 SCOPE A.
More informationSteel Design Guide Series. Steel and Composite Beams with. Web Openings
Steel Design Guide Series Steel and Composite Beams with Web Openings Steel Design Guide Series Steel and Composite Beams with Web Openings Design of Steel and Composite Beams with Web Openings David Darwin
More informationPRESENTATION CENTER SURREY, BC CANADA
PRESENTATION CENTER SURREY, BC CANADA 1 VIEW OF THE PROPOSED OPTIMA 3 TOWERS (AFTER OBTAINING THE HIGH DENSITY THAT IS UNDER STUDY) ALONG WEST WHALLEY RING ROAD 2 3 IHI WILL BUILD THE OPTIMA PRESENTATION
More informationOffice Building-G. Thesis Proposal. Carl Hubben. Structural Option. Advisor: Dr. Ali Memari
Office Building-G Thesis Proposal Structural Option December 10, 2010 Table of Contents Executive Summary... 3 Introduction... 4 Gravity System...4 Lateral System:...6 Foundation System:...6 Problem Statement...
More informationMulti-storey buildings
Doc. Ing. Hana Gattermayerova,CSc gatter@fsv.cvut.cz Contents Multi strorey buildings Sources, literature Definition Features Statical systems Interior Extrior Materials Hájek P. a kol.: Konstrukce pozemních
More informationSK2000 Boltless Pallet Rack Installation and Assembly Manual
SK2000 Boltless Pallet Rack Installation and Assembly Manual Steel King Industries, Inc. 2700 Chamber St Stevens Pont, WI 54481 (800) 826 0203 www.steelking.com info@steelking.com ASSEMBLY INSTRUCTIONS:
More informationSPECIAL INSPECTION AND OBSERVATION PROGRAM City of Walnut Creek Building Division. Project Address:
SPECIAL INSPECTION AND OBSERVATION PROGRAM City of Walnut Creek Building Division Permit Application #: Project Address: Purpose: To meet the requirements of City of Walnut Creek Municipal Code Section
More informationStep 4: Can my rate of production be met with a single. Step 5: Prepare a simple line drawing of the ideal and
Design Guidelines PACLINE Enclosed Track Conveyor An enclosed track overhead conveyor consists of a powered chain running within a round track. Loads are suspended from the chain pendants that stick out
More informationDetailer Training Series Instructions
Instructions Print this document to track your progress throughout the course (pages 2-15). Overview The DTS program provides an introduction and overview of the roles and responsibilities of the steel
More informationSJI Updates Expanded Load Tables for Noncomposite Joists / Joist Girders and Development of New Composite Joist Series
SJI Updates Expanded Load Tables for Noncomposite Joists / Joist Girders and Development of New Composite Joist Series SUMMARY David Samuelson Steel joists are growing in recognition as being a very economical
More informationSTEEL FRAMING INDUSTRY ASSOCIATION OBSERVATION REPORT PROTOCOL STRUCTURAL FRAMING GUIDELINES FOR THE INSPECTOR
STEEL FRAMING INDUSTRY ASSOCIATION OBSERVATION REPORT PROTOCOL STRUCTURAL FRAMING GUIDELINES FOR THE INSPECTOR 1. On site Observation Report by Recognized Engineer (PE) every year (prior to issuance of
More informationDanielle Shetler - Structural option Courtyard by Marriott Lancaster, PA
Structural Analysis Overview: During the structural analysis of the in Lancaster, Pa, a redesign of the lateral and gravity system from masonry bearing and shear walls to a staggered truss system was performed.
More informationPRODUCT DESCRIPTION. Frame Types Available PRIMARY FRAMING. Gable Symmetrical
: A ridged (double slope) building in which the ridge is in the center of the building. Gable: The triangular portion of the endwall from the level of the eave to the ridge of the roof. Gauge: Finish:
More information1 Exam Prep Prov Module: Vertical Formwork Questions and Answers
1 Exam Prep Prov Module: 27308-14 Vertical Formwork Questions and Answers 1. The amount of formwork needed for a job can be influenced by. A. The size of the forming crew B. The project budget C. Materials
More informationStatement. Special Inspection
Statement of Special Inspection Special Inspection Approval Project Name: Location: Owner: Owner s address: Architect of Record: Structural Engineer of Record: The Statement of Special Inspections printed
More informationMITRE 3 Building McLean VA
Executive Summary: The MITRE 3 building is an eight story office building. Its current frame is composed of A992 wide flange shapes. The lateral resisting system is a moment frame. This moment frame consists
More informationThe Structural Redesign of Boyds Bear Country and its Related Systems. Boyds Bear Country, Pigeon Forge, Tennessee
The Structural Redesign of Boyds Bear Country and its Related Systems Included in this Presentation: Background and Existing System Proposal Problem / Solution Structural System Redesigns Pre-cast Concrete
More informationJonathan R. Torch Technical Report 2 Columbia University. Technical Report 2. Pro-Con Structural Study of Alternate Floor Systems
Technical Report 2 Pro-Con Structural Study of Alternate Floor Systems Columbia University Broadway & 120 th Street, New York, NY Jonathan R. Torch Pennsylvania State University Architectural Engineering
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-05 21 00 (May 2015) --------------------------- Preparing Activity: USACE Superseding UFGS-05 21 13 (August 2009) UFGS-05 21 16 (August 2009) UFGS-05 21 19 (July 2007)
More informationTECHNICAL REPORT III LATERAL STRUCTURAL SYSTEM ANALYSIS
TECHNICAL REPORT III LATERAL STRUCTURAL SYSTEM ANALYSIS Chris Vanaskie Structural Peninsula Regional Medical Center Salisbury, MD January 10, 2009 TABLE OF CONTENTS Executive Summary... 3 Introduction...
More informationSKATEWHEEL FLOW RACK
SKATEWHEEL FLOW RACK 2 ASSEMBLY INSTRUCTIONS: Steel King Industries recommends that this product be assembled only by qualified personnel, experienced in assembly of storage racks, and knowledgeable of
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PREFABRICATED STEEL PEDESTRIAN BRIDGE, TYPE 2
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PREFABRICATED STEEL PEDESTRIAN BRIDGE, TYPE 2 OFS:MJF 1 of 10 APPR:JAB:POJ:09-29-18 FHWA:APPR:10-01-18 a. Description. This work consists of
More informationLEGAL. Lessons BY JEFF THOMPSON, P.E., AND ERIKA YARONI
Arizona State s new law school in downtown Phoenix continues the legacy of the Supreme Court justice who cut her legal teeth there. LEGAL Lessons BY JEFF THOMPSON, P.E., AND ERIKA YARONI JULY 2016 Jeff
More informationHome Depot Page 1 of 5 HDPB Humacao, PR 10/19/09
PART 1 - GENERAL 1.01 SUMMARY A. Types of cold-formed metal framing units include the following: 1. C-shaped steel studs B. Related work specified elsewhere includes but may not be limited to: 1. Section
More informationNational Truss for Historic Preservation
National Truss for Historic Preservation JANUARY 2019 A new truss brings structural modernization to a century-old Washington apartment building. BY JASON MYERS, SE, PE, SHANE MAXEMOW, SE, PE, AND TIMON
More informationProduct Information Bulletin
Product Information Bulletin CCMC Evaluation Report 13101-R Advantage Insulating Concrete Forming (ICF) System BULLETIN NO. ISSUED: REPLACES: 201 November 25, 2010 January 2, 2009 Canadian Construction
More informationSECTION STRUCTURAL METAL FRAMING
SECTION 05100 STRUCTURAL METAL FRAMING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Structural steel framing including lintels, shelf angles, bearing plates, anchor bolts and other items as shown on
More informationStrengthened Soil Wall Construction Manual
Strengthened Soil Wall Construction Manual This information has been prepared by Shaw Technologies, Inc. as an aid in constructing their Strengthened Soil Wall system. Final determination of the suitability
More informationPro-Con Structural Study of Alternate Floor Systems
Andrew Covely Structural Dr. Linda Hanagan The Helena New York City, NY October 27, 2004 Pictures courtesy of Fox & Fowle Architects Pro-Con Structural Study of Alternate Floor Systems Executive Summary
More informationconference preview CORE SOLUTION
conference preview CORE SOLUTION BY BRIAN MORGEN, SE, PE, PhD, RON KLEMENCIC, SE, PE, HON. AIA, AND AMIT VARMA, PhD A new composite assembly is positioned to set the pace for future high-rise buildings
More informationPolycrete Big Block Standard Specification
Polycrete Big Block Standard Specification SECTION 03 11 19 INSULATED CONCRETE FORMING 10/13 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent
More informationENTRY FORM. DVASE 2016 Excellence in Structural Engineering Awards Program
ENTRY FORM DVASE 2016 Excellence in Structural Engineering Awards Program PROJECT CATEGORY (check one): Buildings under $2M Buildings Over $100M X Buildings $2M-$10M Other Structures Under $5M Buildings
More informationCouncil on Tall Buildings
Structure Design of Sino Steel (Tianjin) International Plaza Xueyi Fu, Group Chief Engineer, China Construction Design International 1 1 Brief of Project 2 Location: Tianjin Xiangluowan Business District
More informationSPECIAL INSPECTION AND OBSERVATION PROGRAM CITY OF CONCORD BUILDING DIVISION. Project Address:
SPECIAL INSPECTION AND OBSERVATION PROGRAM CITY OF CONCORD BUILDING DIVISION Permit Application #: Project Address: Purpose: To meet the requirements of CBC Section 1704.3 this form may be used as a statement
More informationSECTION STRUCTURAL STEEL
SECTION 051200 STRUCTURAL STEEL PART 1 GENERAL 1.01 SECTION INCLUDES A. Structural steel framing members and support members. B. Base plates, shear stud connectors. C. Grouting under base plates. 1.02
More informationMezzanines By Design Page 1
SECTION 05120 STRUCTURAL STEEL PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 1 apply to this Section. 1.2 SUMMARY
More informationStainless Steel Aeration Equipment Specification
Section 15 Stainless Steel Aeration Equipment Specification Part 1 - General 1.01 Description A. Scope of Work 1. Furnish, install and test aeration system including air mains, drop pipes, valves, expansion
More informationCommission No Section
Commission No. 1511 Section 05120-1 PART ONE - GENERAL 1.1 DESCRIPTION A. Work Included: Structural steel and grout. Furnish, fabricate, mark for erection identification, pack, crate, or otherwise properly
More informationSafeDeck Supported Scaffold System
SafeDeck Supported Scaffold System Table of Contents Origination 1 Range of Motion 1 Installation Efficiency 2 Third-Party Testimonial 2 SafeDeck Specifications 3 Competent Person 4 Tools Required 4 Components
More informationFrequently Asked Questions. ConX Modular Pipe Rack
Frequently Asked Questions ConX Modular Pipe Rack Product...3 1. How does the ConX System compare to conventional design in pipe rack applications?...3 2. How does the ConX System compare cost-wise to
More informationDEPARTMENT OF ARCHITECTURE ABUBAKAR TAFAWA BALEWA UNIVERSITY, BAUCHI ARC 615: ADVANCED BUILDING STRUCTURES LESSON 4: VECTOR ACTIVE STRUCTURAL SYSTEMS
DEPARTMENT OF ARCHITECTURE ABUBAKAR TAFAWA BALEWA UNIVERSITY, BAUCHI ARC 615: ADVANCED BUILDING STRUCTURES LESSON 4: VECTOR ACTIVE STRUCTURAL SYSTEMS 4.1 Introduction 4.2 Structural concept of planar trusses
More informationRacking systems RACKING SYSTEMS. IT S EASY TO ORDER sales hotline:
Racking systems Bar and Sheet Racking and Storage...40 Supershelf Tyre Racking...44 Pallet Racking...45 Protection for Racking and Columns...46 IT S EASY TO ORDER www.action-storage.co.uk sales hotline:
More informationKey Applications. Why Choose Selective Pallet Racking? S K 2000 SERIES. Closed Tubular Rack. Versatile, Strong and Durable
We will work with you to analyze your pallet racking needs and help you to make an informed choice of the best configurations for your operational goals. Selective Pallet Racking? Key Applications Pallet
More informationVOLUNTARY - EARTHQUAKE HAZARD REDUCTION IN EXISTING HILLSIDE BUILDINGS (Division 94 Added by Ord. No. 171,258, Eff. 8/30/96.)
DIVISION 94 VOLUNTARY - EARTHQUAKE HAZARD REDUCTION IN EXISTING HILLSIDE BUILDINGS (Division 94 Added by Ord. No. 171,258, Eff. 8/30/96.) SEC. 91.9401. PURPOSE. (Amended by Ord. No. 172,592, Eff. 6/28/99,
More informationTargeting the Deadly Dozen
Prevent Decking Incidents Prevent Unauthorized Access to Controlled Decking Zone Ensure Lap-Spices are Connected and Sufficient Sheet Bearing at Ends Install Perimeter Safety Cables and Prevent Open-Sided
More informationSENIOR THESIS PROPOSAL STRUCTURAL REDESIGN USING STEEL FRAMING
SENIOR THESIS PROPOSAL STRUCTURAL REDESIGN USING STEEL FRAMING THE TOWERS AT THE CITY UNIVERSITY OF NEW YORK NEW YORK CITY, NEW YORK ROBIN SCARAMASTRO AE 481 W DR. MEMARI EXECUTIVE SUMMARY The Towers at
More informationBOLTLESS SK2000 SK2500 BOLTED. Closed Tubular Rack Versatile, Strong and Durable SK2000 SERIES
Closed Tubular Rack Versatile, Strong and Durable SK2000 SERIES SK2000 BOLTLESS SK2500 BOLTED We will work with you to analyze your pallet racking needs and help you to make an informed choice of the best
More informationRESPONSIBILITIES IN THE DESIGN PROCESS INVOLVING METAL PLATE CONNECTED WOOD TRUSSES
CHAPTER 2 RESPONSIBILITIES IN THE DESIGN PROCESS INVOLVING METAL PLATE CONNECTED WOOD TRUSSES 2.1 PURPOSE The purpose of this chapter is as follows: 2.1.1 To define and draw attention to the typical duties
More informationStatement of Special Inspections
Statement of Special Inspections SUCF Project No: Project Title: Registered Design Professionals in Responsible Charge: (Name) (Address) Architect: Structural Engineer: Mechanical Engineer: Identification
More informationSteel Expansion. Located along the Grand River in
Steel Expansion by Michael Gustafson, P.E. The DeVos Place convention center in Grand Rapids, MI, is undergoing a multi-year expansion featuring steel-framed column-free exhibit space. Located along the
More informationIdentification of Structural Issues in Design and Construction of Multi- Story Modular Buildings
Identification of Structural Issues in Design and Construction of Multi- Story Modular Buildings Issa J. Ramaji 1 and Ali M. Memari 2 1 Ph.D. Candidate, Department of Architectural Engineering, Penn State
More informationTHE PARKING STRUCTURE PROTOTYPE II
THE PARKING STRUCTURE PROTOTYPE II 866.ask.aisc solutions@aisc.org THE PARKING STRUCTURE PROTOTYPE II Prepared by: AISC Steel Solutions Center What's this? This package contains a fictitious project with
More informationSECTION COLD-FORMED METAL FRAMING
SECTION 05.40.00 COLD-FORMED METAL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Cold-formed metal framing for: B. Exterior load-bearing steel stud walls. 1. Interior load-bearing steel stud walls. 2.
More informationEVALUATION REPORT. PFC-5551 Reissued April 1, Filing Category: DESIGN Steel (038)
ICBO Evaluation Service, Inc. 5360 WORKMAN MILL ROAD WHITTIER, CALIFORNIA 90601-2299 A subsidiary corporation of the International Conference of Building Officials EVALUATION REPORT Copyright 2001 ICBO
More informationC14. Steel Connection Design
C14. Steel Connection Design As with all steel construction, connection design and detailing will have a major effect on the buildability, safety and cost of the structure. Steel connection design for
More informationLPA Inc./Cris Costea Photography Inc.
A new community college student center takes advantage, and not-so-subtly displays the versatility and sustainability, of structural steel. Light as AIR BY BRYAN SEAMER, SE, AND DANIEL WANG, SE FEBRUARY
More informationTechnical & General Specifications
Technical Information Technical & General Specifications Precast concrete boardwalk system Technical Specification 1.0 GENERAL The following covers: A. The supply, performance and design criteria requirements
More informationThird Avenue New York, NY. Structural Concepts/ Structural Existing Conditions Report September 30, Michelle L.
Executive Summary The structural design of 554-556 Third Avenue is composed of two way concrete slabs supported by a system of columns spanning an average of twenty feet. Lateral loads are resisted by
More informationSPECIAL INSPECTION AND TESTING AGREEMENT
COUNTY OF MENDOCINO DEPARTMENT OF PLANNING AND BUILDING SERVICES 860 NORTH BUSH STREET UKIAH CALIFORNIA 95482 120 WEST FIR STREET FT. BRAGG CALIFORNIA 95437 STEVE DUNNICLIFF, DIRECTOR PHONE: 707-234-6650
More informationHomesteading the Frame
Homesteading the Frame B. Neburka, C. Strickland 1 Homesteading the Frame Bill Neburka Works Architecture Portland, Oregon, United States Carrie Strickland Works Architecture Portland, Oregon, United States
More informationVARIOUS TYPES OF SLABS
VARIOUS TYPES OF SLABS 1 CHOICE OF TYPE OF SLAB FLOOR The choice of type of slab for a particular floor depends on many factors. Economy of construction is obviously an important consideration, but this
More informationJAMES DEAN BAKER ALCOA CORPORATE CENTER STRUCTURAL OPTION 201 ISABELLA STEET
JAMES DEAN BAKER STRUCTURAL OPTION ALCOA CORPORATE CENTER 201 ISABELLA STEET PRESENTATION OUTLINE Introduction Existing Conditions Structural Existing Conditions Design Goals and Criteria Suspension Design
More informationSPECIAL INSPECTION AGREEMENT
DEVELOPMENT SERVICES DEPARTMENT BUILDING AND SAFETY DIVISION 156 S. BROADWAY, SUITE 130 TURLOCK, CALIFORNIA 95380 PHONE 209-668-5560 FAX 209-668-5107 SPECIAL INSPECTION AGREEMENT PERMIT NUMBER: DATE: OWNER:
More informationStatement of Special Inspections
Statement of Special Inspections Project: Location: Owner: Design Professional in Responsible Charge: This Statement of Special Inspections is submitted as a condition for permit issuance in accordance
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PREFABRICATED STEEL PEDESTRIAN BRIDGE, TYPE 2
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PREFABRICATED STEEL PEDESTRIAN BRIDGE, TYPE 2 OFS:MJF 1 of 10 APPR:JAB:POJ:07-07-17 FHWA:APPR:07-11-17 a. Description. This work consists of
More informationTechnical Report #2. Matthew R Peyton
Technical Report #2 This Document is Technical Report #2 for 5th year senior thesis in the Architectural Engineering Departments at The Pennsylvania State University. This Report is to prepare a study
More informationIssue Date: April 2003 Release: I. Product Specifications
Issue Date: April 2003 Release: I Product Specifications Forming System Components Standard System Commercial System Issue Date: April 2003 Release: I 1.1 Issue Date: April 2003 Release: I 1.2 Specification
More informationA. Types of lightgauge metal framing units include the following: 1. C-shaped structural steel studs Uniform Building Code.
SECTION 05400 COLD-FORMED METAL FRAMING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 102239 - FOLDING PANEL PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationThese systems are evaluated on the basis of serviceability issues such as:
1 Traci Peterson Option: Structural Faculty Consultant: Memari The Del Monte Center at The North Shore Pittsburgh, PA Structural Technical Report 2 Pro Con Structural Study of Alternate Floor Systems Date
More informationState Street New Haven CT Structural Sabrina Duk T. Boothby
360 State Street New Haven CT 06510 360 State Street New Haven CT 06510 Breadth Study Cost & Schedule Comparison About 360 State Street Project Team Owner/Architect: Becker + Becker Associates Structural
More information1. Telecommunications mounting elements. 2. Backboards. 3. Telecommunications equipment racks and cabinets. 4. Grounding.
ALLIANT ENERGY CENTER PAVILIONS Project No. 2013 027 SECTION 27 11 00 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION COLD-FORMED METAL FRAMING
SECTION 05.40.00 COLD-FORMED METAL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Cold-formed metal framing for: B. Exterior load-bearing steel stud walls. 1. Interior load-bearing steel stud walls. 2.
More information1. Base plates, setting plates and anchor rods for columns. 8. Lintels if connected to structural steel columns.
PAGE 051200-1 SECTION 051200 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationThesis Proposal December 5, 2003
Executive Summary Thesis Proposal December 5, 2003 Brennan Hall is a five-story office/classroom building. It is located on a slightly sloping site, surrounded by other structures and a small green space.
More informationTechnical Report 1 Bed Tower Addition at Appleton Medical Center Appleton, WI
Courtesy of HGA Technical Report 1 Bed Tower Addition at Appleton Medical Center Appleton, WI Jessel Elliott Structural 2011 Architectural Engineering Senior Thesis Studio Advisor: Dr. Richard Behr Date:
More informationLateral System Analysis and Confirmation Design (S-3)
November 13, 2002 Lateral System Analysis and Confirmation Design (S-3) Executive Summary: This report summarizes the analysis of the lateral systems used in the 250 West Street building in Columbus, Ohio.
More informationTable of Contents Executive Summary 2 Introduction 3 Structural Systems Problem Statement 9 Proposed Solution 10 Breadth Topics 11 Tasks and Tools
Table of Contents Executive Summary...2 Introduction...3 Structural Systems Foundation System...4 Gravity System...6 Lateral System...7 Problem Statement...9 Proposed Solution...10 Breadth Topics...11
More informationSTATEMENT OF SPECIAL INSPECTION FORM
Project Title: Permit #: Project Address: STATEMENT OF SPECIAL INSPECTION FORM This Statement of Special Inspections is submitted in fulfillment of the requirements of CBC Sections 1704 and 1705. Special
More informationModular Wood Framing Goes Vertical
Modular Wood Framing Goes Vertical By: Troy Bean, P.E., S.E. DCI Engineers January 2013 The Wood Products Council is a Registered Provider with. Credit(s) earned on completion of this program will be reported
More informationARCHITECTURAL ENGINEERING THE PENNSYLVANIA STATE UNIVERISITY THESIS PROJECT
ARCHITECTURAL ENGINEERING THE PENNSYLVANIA STATE UNIVERISITY THESIS PROJECT PASEO CARIBE CONDOMINIUM TOWER & PARKING Coupled Shear Wall Systems in High Seismic Zones PASEO CARIBE CONDOMINIUM TOWER & PARKING
More information