SECTION CERAMIC TILE

Size: px
Start display at page:

Download "SECTION CERAMIC TILE"

Transcription

1 SECTION CERAMIC TILE PART 1 GENERAL 1.1 SCOPE A. Drawings and general provisions of the Contract, including General and Supplementary General Conditions, Division 00 & 01 Specification Sections, apply to this Section. 1.2 WORK INCLUDED The work includes but is not limited to the following items: All new ceramic tile work, floor, base, walls. Patching of all ceramic tile at and adjacent to window openings as indicated on the drawings. All new quarry tile work, floors & base. All new Corian sills at new window openings in the KenmoreTown of Tonawanda UFSD Buildings as indicated on the drawings. Refer to Section Solid Surface Fabrications. Patching of ceramic tile walls, base and floors. PART 2 PRODUCTS 2.1 MATERIALS A. All materials shall conform to latest edition of the following specifications: 1. Portland Cement - A.S.T.M. C-150, Type 1 2. Hydrated Lime - A.S.T.M. C-207, Type S 3. Sand - A.S.T.M. C144-66T 4. Water - Clean and portable 5. Dry Set Mortar - U.S.A. A Organic adhesives - ANSI - A Epoxy mortar ANSI A Wire fabric - A.S.T.M. A-82 and A Membrane - 15# building felt or.004" polyethylene. 10. All tile shall be of domestic manufacturer. It shall equal or exceed the standard grade requirements of ANSI A137.1 latest edition and Federal Specifications SS-T-308C

2 B. All tile shall be of domestic manufacturer. It shall equal or exceed the standard grade requirements of ANSI A137.1 latest edition and Federal Specifications SS- T-308C. 1. Floor tile shall be ceramic mosaic floor tile, dust pressed, vitreous, unglazed, ceramic mosaic porcelain, cushion edge. 2. Wall tile shall be cushion edged, glazed tile, with a satin, matte, or designer accent (Premium) glazed band of tile to be installed also in bathrooms and corridors. 3. Ceramic tile base shall be same as the floor tile where no wall tile is called for and the same as the wall tile where floor and wall tiles are called for. 2.2 GROUTING MATERIALS A. Grout for glazed wall tile: Dry tile type grout similar to Mapei latex modified unsanded grouts or approved equal. B. Grout for unglazed floor tile: Sanded Portland Cement type similar to Mapei latex modified sanded grouts or approved equal. C. Colors to be selected by the Architect from the standard color ranges of each manufacturer. D. Grout for food preparation and kitchen areas: 100% solid epoxy grout per ANSI A Similar to Mapei Kerapoxy or approved equal. 2.4 PATCH WORK A. Where patch work is required, existing materials, sizes and construction shall be matched. 2.5 TILE TYPES Colors shall be as selected by Architect. A. Floor Tiles: Ceramic mosaic, unglazed, price groups 1, 2, 3 and 4, size shall be 1" X 1", 1" X 2", 2" X 2" or a combination of 4 different colors in 2' panel. Pattern and colors as selected by the Architect

3 B. Base: Same as floor, coved or straight as indicated on drawing or specified. Base Types: Type a Type b Type c Type d Ceramic mosaic tile floor with 6" x 6" wall receives a 6" x 6" cove base. Ceramic Mosaic tile floor with concrete block or gypsum wall board wall receives a 6" x 6" round top base. VCT or terrazzo floor with 6" x 6" wall receives a 6" x 6" straight base. VCT floor with 6" x 6" wall receives a 6" x 6" straight base. C. Wall Tiles: Glazed tile: Semi-gloss, matte, (price groups 1 & 2 for field tile) and designer accent 2 rows, (premium - price group 3 & 4) glazed as noted on drawings or specified. Sizes: Refer to the drawings for locations and sizes. Sizes and colors located as follows: Match existing sizes, finish and colors to patch in ceramic tile at window openings as indicated on drawings. 2.6 SAMPLES A. Submit samples of all tiles in this section for Architect's approval prior to installation. Samples shall be of size being installed to indicate true color and texture (6" x 6", 2" x 2", etc.) being installed. B. Maintenance (Extra) Stock: Provide one carton or 5%, whichever is greater, of each of the manufacturers and colors installed

4 2.7 MANUFACTURERS A. Approved manufacturers are domestic manufacturers meeting specifications. B. Acceptable Manufacturers: American Olean Tile Company, Dal-Tile Corporation. 2.8 CERTIFICATE AND PACKAGING A. All tiles shall be graded, sealed, and delivered in accordance with U.S. Department of Commerce Simplified Practice Recommendation R B. Contractor shall furnish certificate in duplicate, signed by manufacturer of tile, stating grades, kinds, quantities, and identification marks for all packages of tiles furnished. 2.9 MANUFACTURERS & MATERIALS FOR EDGE PROTECTION A. Acceptable Manufacturer: Schluter Systems, L.P., 194 Pleasant Ridge Road, Plattsburgh, NY ASD. Tel: (800) Fax (800) E- mail: Web: B. Schluter-RONDEC 1. Description: bullnose-type profile with symmetrically rounded visible surface with 1/4 inch (6 mm) radius, integrated trapezoid-perforated anchoring leg, and integrated grout joint spacer. 2. Corners: a. Provide with matching inside corners. b. Provide with matching outside corners. c. Provide with matching internal connectors. 3. Material and Finish: a. EV4A - Stainless Steel Type 316 L = V4A. 1) Height as required. PART 3 EXECUTION 3.1 INSTALLATION AND WORKMANSHIP A. All materials shall be installed in accordance with the latest specifications and recommendations of the Tile Council of America, Inc. B. Inspect all surfaces on which tile is to be installed and report unsatisfactory conditions to Architect. C. Do not cut tile excessively. Make no cuts smaller than half size. Make all cuts on the outer edges of the field

5 D. Smooth all cut edges with a carborundum stone, and install no tile with jagged or flaked edges. E. Make corners of all tile flush and level with corners of adjacent tile, with due allowance to warpage tolerances for tile as specified in ANSI A F. Keep all joint lines straight and of even width, including miters. G. The finished tile work shall be clean and free of tiles which are pitted, chipped, cracked, flaked or scratched. H. Unless otherwise indicated, wall tiles shall be thin set and installed according to the Organic Adhesive Method. According to Federal and Manufacturer's Specifications. Smoothen wall where required. I. Floor Tile: Ceramic wall tile to be set over existing masonry shall be installed according to TCA method W Set ceramic floor tile in the cement set method properly pitched to drains and all according to the 2013 TCA Handbook Section F Floor tile, ceramic tile, base, and quarry tile to be installed in thin set system according to manufacturer's specifications. Inspect base for tile, report unsatisfactory conditions to Architect; await instructions to proceed. Slab clean prior to applying setting bed. Joints grouted full depth to setting bed. Clean off excess grout, sponge diagonally, polish with clean dry cloth. Pitch floor evenly to floor drains. J. Protect walls and floors until it is safe to use tiled areas. Cover with waterproof paper and damp cure three days. No Traffic allowed until curing period is complete. K. Miscellaneous and Repair Work: Match existing installation method. Protect walls and floors until it is safe to use tiled areas. Cover with waterproof paper and damp cure three days. No traffic allowed until curing period is complete. 3.2 WINDOW STOOLS A. Refer to Section Solid Surface Fabrications for Corian window sills. END OF SECTION

6

SECTION CERAMIC and QUARRY TILE

SECTION CERAMIC and QUARRY TILE PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 09 30 13 CERAMIC and QUARRY TILE A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specification

More information

SECTION CERAMIC TILE. B. Ceramic tile wall finishes including standard and custom designs.

SECTION CERAMIC TILE. B. Ceramic tile wall finishes including standard and custom designs. SECTION 09 30 13 CERAMIC TILE PART 1 GENERAL 1.1 SECTION INCLUDES A. Ceramic tile floor and base finishes. B. Ceramic tile wall finishes including standard and custom designs. 1.2 REFERENCES A. ANSI/TCNA

More information

1.3 Work shall include all reinforcement and accessories necessary to complete installation.

1.3 Work shall include all reinforcement and accessories necessary to complete installation. CERAMIC TILING GENERAL INFORMATION 1.1 Ceramic mosaic tile floors and bases, glazed wall tile wainscots and walls, and marble thresholds. 1.2 Installation will typically be with latex-portland cement mortar

More information

BuildingName The Description of the Project P DOCUMENTS

BuildingName The Description of the Project P DOCUMENTS ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION

More information

SECTION TILING

SECTION TILING PART 1 GENERAL 1.01 SECTION INCLUDES A. Ceramic Tile for floor applications. B. Ceramic Tile for wall applications. C. Ceramic accessories. D. Ceramic trim. E. Non-ceramic trim. 1.02 RELATED REQUIREMENTS

More information

SECTION TILING

SECTION TILING SECTION 09 30 00 TILING PART 1 - GENERAL 1.1 SUMMARY A. Section includes tile as indicated on new surfaces and as specified. 1.2 SUBMITTALS A. Samples: 1. Submit samples of colors and sizes of tile. B.

More information

Student Services & Classroom Addition

Student Services & Classroom Addition SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

B. Related Sections: 1. Division 07 Section "Joint Sealants" for sealing of expansion, contraction, control, and isolation joints in tile surfaces.

B. Related Sections: 1. Division 07 Section Joint Sealants for sealing of expansion, contraction, control, and isolation joints in tile surfaces. SECTION 093000 - CERAMIC TILE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

A. Product Data: For each type of tile, mortar, grout, and other products specified.

A. Product Data: For each type of tile, mortar, grout, and other products specified. SECTION 09310 - CERAMIC TILE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

Bush Elem. Addition & Alterations QUARRY TILE SECTION QUARRY TILE PART 1 - GENERAL

Bush Elem. Addition & Alterations QUARRY TILE SECTION QUARRY TILE PART 1 - GENERAL 73651.01 QUARRY TILE 093016-1 1.1 RELATED DOCUMENTS: SECTION 093016 - QUARRY TILE PART 1 - GENERAL A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division

More information

SECTION GYPSUM BOARD ASSEMBLIES

SECTION GYPSUM BOARD ASSEMBLIES SECTION 09260 GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.1 SUMMARY A. Provide gypsum board assemblies. 1.2 SUBMITTALS A. Product Data: Submit manufacturer's product data and installation instructions for

More information

Construction Specification

Construction Specification PART 1 - GENERAL 1.01 SUMMARY A. Furnish all labor, materials, tools and equipment required for completing tile work and related items indicated on the drawings and herein specified. B. Related work specified

More information

***************************************************************************************************************

*************************************************************************************************************** 09330 QUARRY TILE *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 09 30 16 ***************************************************************************************************************

More information

Editing notes to assist users are separated from specification text by rows of asterisks. Delete these notes prior to final printing.

Editing notes to assist users are separated from specification text by rows of asterisks. Delete these notes prior to final printing. SECTION 09635 LIMESTONE FLOORING This guide specification has been prepared by TexaStone Quarries LLC to assist design professionals in the preparation of a specification section covering cut limestone

More information

C. Module Size: Actual tile size plus joint width indicated.

C. Module Size: Actual tile size plus joint width indicated. PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

SECTION CERAMIC TILING

SECTION CERAMIC TILING SECTION 09 3013 CERAMIC TILING PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install ceramic tile and tile setting materials and accessories as described in Contract Documents.

More information

Kolorines Glass Mosaic Tiles Project Specification

Kolorines Glass Mosaic Tiles Project Specification Kolorines Glass Mosaic Tiles Project Specification SUGGESTED SPECIFICATION Glass Mosaic Tile Installation for Swimming Pools NOTES TO SPECIFIER: 1. Specify PremiumPlus Thin-Set mixed with CustomFlex Additive

More information

TILE TILE

TILE TILE 09300 - TILE 09300-1 PART ONE: GENERAL 1.1 Description TILE 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance with the requirements

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Cast

More information

Finish Flooring- Hard Flooring Materials

Finish Flooring- Hard Flooring Materials Finish Flooring- Hard Flooring Materials The most desirable types of flooring by designers and building owners Types of Hard Flooring Materials Concrete Stone Ceramic Tiles Quarry Tiles Bricks and Brick

More information

1.6 QUALITY ASSURANCE A. Source Limitations for Tile: Obtain tile of each type and color or finish from one source or producer.

1.6 QUALITY ASSURANCE A. Source Limitations for Tile: Obtain tile of each type and color or finish from one source or producer. SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

SECTION QUARRY TILE. A. American National Standards Institute ANSI A108.3.

SECTION QUARRY TILE. A. American National Standards Institute ANSI A108.3. SECTION 09330 QUARRY TILE PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 07900 - Joint Sealers. 3. 09310 - Ceramic Tile. 4. 15421 - Drains and Cleanouts. 1.02 REFERENCES

More information

DIVISION 9 - FINISHES

DIVISION 9 - FINISHES Part 1 - General 1.01 Work Included: A. All materials, labor services and incidentals necessary for the completion of this section of the work. 1.02 Quality Assurance: A. Standards: 1. Tile Council of

More information

Division 09 Finishes Section Ohio Utilities Protection Service New Office Building Bid Package B TILING

Division 09 Finishes Section Ohio Utilities Protection Service New Office Building Bid Package B TILING SECTION 09 30 00 TILING PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Porcelain Paver Tile. 2. Mortars and Grouts. 3. Floor Preparation Materials. B. Related Sections: Documents relating to the work

More information

SECTION TILING

SECTION TILING SECTION 093000 TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

Sub-Section Paver Tiling

Sub-Section Paver Tiling Section 093019 StonePeak Ceramic Guide Specification 093019-- 1 Division 09 Finishes Section 093000 Tiling Sub-Section 093019 Paver Tiling NOTE TO SPECIFIER: Please review the entire specification before

More information

2018 Flooring Specification - Tile Set Method TECTURA DESIGNS CEMENT TERRAZZO TILES

2018 Flooring Specification - Tile Set Method TECTURA DESIGNS CEMENT TERRAZZO TILES 2018 Flooring Specification - Tile Set Method 09300 TECTURA DESIGNS CEMENT TERRAZZO TILES PART 1 - GENERAL 1.1 INTRODUCTION A. Tectura Designs, Terrazzo Tiles are to be installed following the tile setting

More information

SECTION PAVER TILE

SECTION PAVER TILE SECTION 09340 PAVER TILE PART 1 - GENERAL 1.01 DESCRIPTION: A. This section specifies providing paver tiles, typically in patron areas as shown. These tiles are noted on Drawings as: 1. Paver tile. 2.

More information

SECTION TILING PART 1 - GENERAL 1.1 SUMMARY. A. Section Includes: 1. Ceramic tile. 2. Waterproof membrane. 3. Metal edge strips.

SECTION TILING PART 1 - GENERAL 1.1 SUMMARY. A. Section Includes: 1. Ceramic tile. 2. Waterproof membrane. 3. Metal edge strips. SECTION 093000 - TILING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ceramic tile. 2. Waterproof membrane. 3. Metal edge strips. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.

More information

SECTION EPOXY TERRAZZO TILE WITH RECYCLED GLASS MATRIX

SECTION EPOXY TERRAZZO TILE WITH RECYCLED GLASS MATRIX GlassPLANK GUIDE SPECIFICATION Manufacturer: GLASS RECYCLED LLC 2939 Irving Blvd Suite 305 Dallas TX 75247 (888) 523-7894 toll free voice www.glassrecycled.com SECTION 09 66 18 EPOXY TERRAZZO TILE WITH

More information

SECTION BRICK FLOORING

SECTION BRICK FLOORING SECTION 09 63 13 BRICK FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brick flooring

More information

SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA SPECIFICATION FOR CERAMIC TILE FOR 15 th STREET STATION

SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA SPECIFICATION FOR CERAMIC TILE FOR 15 th STREET STATION SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 SPECIFICATION FOR CERAMIC TILE FOR 15 th STREET STATION TABLE OF CONTENTS Specification Sections: Division

More information

SECTION CONCRETE PAVING SLABS SET IN MORTAR

SECTION CONCRETE PAVING SLABS SET IN MORTAR SECTION 32 14 13.16 CONCRETE PAVING SLABS SET IN MORTAR (1995 MasterFormat Section 02784) Note: This guide specification for the U.S. is for paving slabs mortared to a concrete base and grouted joints

More information

A. Module Size: Actual tile size (minor facial dimension as measured per ASTM C 499) plus joint width indicated.

A. Module Size: Actual tile size (minor facial dimension as measured per ASTM C 499) plus joint width indicated. SECTION 093000 - TILING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Special Conditions and Division 01 Specification Sections, apply

More information

SECTION ULTRACOMPACT WALL FINISHES - THIN SET

SECTION ULTRACOMPACT WALL FINISHES - THIN SET PART 1. GENERAL 1.1 SUMMARY A. Section Includes: 1. Quartz interior wall finishes. 2. Setting materials and accessories. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 09 6613 - PORTLAND CEMENT TERRAZZO FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

SECTION EPOXY TERRAZZO

SECTION EPOXY TERRAZZO SECTION 09 66 23.16 EPOXY TERRAZZO THIS GUIDE SPECIFICATION HAS BEEN PREPARED BY THE NATIONAL TERRAZZO AND MOSAIC ASSOCIATION, INC., AND IS DISTRIBUTED FOR USE BY ITS MEMBERS AND DESIGN PROFESSIONALS.

More information

Schluter -DITRA. Ensure the lasting beauty of your tiled floor

Schluter -DITRA. Ensure the lasting beauty of your tiled floor Schluter -DITRA Ensure the lasting beauty of your tiled floor Made for TILE The timeless beauty of ceramic and stone tiles has become a major trend in the design industry, and a must-have for many homeowners.

More information

Narrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations

Narrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations The following specification refers to the Stepstone, Inc. product known as: Narrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations Narrow Modular Pavers are part of the California Architectural

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-04 21 26 (November 2009) ----------------------------- Preparing Activity: USACE Superseding UFGS-04 21 26 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS References

More information

CONCRETE TILE PAVERS

CONCRETE TILE PAVERS Section 32 14 13 CONCRETE TILE PAVERS (1995 MasterFormat Section 02780) Note: This guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the

More information

SHOWER RECEPTORS Solid Backing, Bonded Waterproof Membrane Intergraded Bonding Flange Ceramic Tile

SHOWER RECEPTORS Solid Backing, Bonded Waterproof Membrane Intergraded Bonding Flange Ceramic Tile SHOWER RECEPTORS Solid Backing, Bonded Waterproof Membrane Intergraded Bonding Flange Ceramic Tile MAPEI: MB422 TCNA: B422-13 TTMAC: 326DR-A SOLID BACKING CERAMIC TILE 1). GROUT 2). CEMENTITIOUS BOND COAT

More information

D. Maintenance data for resilient floor tile to include in Operating and Maintenance Manual specified in Division 1.

D. Maintenance data for resilient floor tile to include in Operating and Maintenance Manual specified in Division 1. SECTION 09660 RESILIENT TILE FLOORING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

for Mortar-Set Concrete Tiling Installations

for Mortar-Set Concrete Tiling Installations The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Mortar-Set Concrete Tiling Installations Large Scale CalArc Pavers are part of the California Architectural

More information

ADDENDUM NO. 6. Acknowledge receipt of this Addendum in the space provided in the Proposal Form. Failure to do so may disqualify the Bidder.

ADDENDUM NO. 6. Acknowledge receipt of this Addendum in the space provided in the Proposal Form. Failure to do so may disqualify the Bidder. PROJECT: Lovington Fire Station # 2 WDG PROJECT NO: 445-01 DATE: July 120, 2018 ADDENDUM NO. 6 NOTICE TO PROPOSERS: This Addendum forms a part of the Contract Documents and modifies the original Specifications

More information

SECTION PORTLAND CEMENT TERRAZZO FLOORING

SECTION PORTLAND CEMENT TERRAZZO FLOORING PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 66 13 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between //---// if not applicable to project. Also delete any other item or paragraph

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 09 6623 - RESINOUS MATRIX TERRAZZO FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

SECTION QUARRY TILE

SECTION QUARRY TILE SECTION 09 30 16 QUARRY TILE PART 1 GENERAL 1.1 SECTION REQUIREMENTS A. Provide all labor, materials and equipment required for the installation of quarry tile flooring as shown on drawings and schedules

More information

avante Freedom of expression

avante Freedom of expression avante GLAZED Porcelain Floor tile & Glazed Ceramic Wall and mosaic Tile WITH REVEAL IMAGING TM Freedom of expression Avante in Bianco 10 x 14 and 3 x 6 wall tile. Avante Subtle tones from nature inspired

More information

Installation of Large Format Tile & Stone

Installation of Large Format Tile & Stone Installation of Large Format Tile & Stone TDS 193 Use of Large Format Tile and Stone Twenty to twenty five years ago choosing tile was simple. Floor tile was typically 8 x 8 (200mm x 200mm) and wall tile

More information

SECTION Vitrified Clay Wall Coping 2014

SECTION Vitrified Clay Wall Coping 2014 SECTION 04220 2014 PART 1 GENERAL 1.1 DESCRIPTION A. SCOPE OF WORK 1. Provide new coping as indicated on Drawings. B. RELATED SECTIONS 1. Section 02050: Selective Demolition. 2. Section 07650: Metal Flashing.

More information

Sections Paver Tiling Guide Specification; for installation of Marion Ceramics, Thin Brick Tiles; Flooring, Veneer

Sections Paver Tiling Guide Specification; for installation of Marion Ceramics, Thin Brick Tiles; Flooring, Veneer Sections 09 30 19 Paver Tiling Guide Specification; for installation of Marion Ceramics, Thin Brick Tiles; Flooring, Veneer PART 1 GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions

More information

SECTION EPOXY TERRAZZO

SECTION EPOXY TERRAZZO SECTION 09 66 23.16 EPOXY TERRAZZO THIS GUIDE SPECIFICATION HAS BEEN PREPARED BY THE NATIONAL TERRAZZO AND MOSAIC ASSOCIATION, INC., AND IS DISTRIBUTED FOR USE BY ITS MEMBERS AND DESIGN PROFESSIONALS.

More information

TILING Lutheran Church of the Holy Spirit

TILING Lutheran Church of the Holy Spirit SECTION 093000 - TILING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Porcelain tile. 2. Tile backing panels. 3. Metal edge strips. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.

More information

/ARD BuyLine 8656 ARDEX TILE & STONE INSTALLATION PRODUCT SHOWCASE

/ARD BuyLine 8656 ARDEX TILE & STONE INSTALLATION PRODUCT SHOWCASE 09 30 00.11/ARD BuyLine 8656 2009 ARDEX TILE & STONE INSTALLATION PRODUCT SHOWCASE The ARDEX Tile & Stone Installation System is a full line of thin set mortars, tile adhesives, waterproofing systems,

More information

SECTION INSTALLATION AND/OR REPLACEMENT OF MASONRY UNITS AND REPOINTING

SECTION INSTALLATION AND/OR REPLACEMENT OF MASONRY UNITS AND REPOINTING SECTION 04210 INSTALLATION AND/OR REPLACEMENT OF MASONRY UNITS AND REPOINTING PART I GENERAL 1.1 SUMMARY A. Provide installation of new or replacement of masonry units and/or repointing of masonry units

More information

SECTION TERRAZZO TILE. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.

SECTION TERRAZZO TILE. Display hidden notes to specifier by using Tools / Options / View / Hidden Text. SECTION 09325 TERRAZZO TILE Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Terrazzo tile in dimensioned and slab thicknesses. 1.2

More information

WALL TILE CHARACTERISTICS

WALL TILE CHARACTERISTICS DOCKSIDE Glazed porcelain tile is suitable for all interior floor, wall or ceiling ap-plications including wet areas. Exterior flooring application suitability is subject to slip & abrasion resistance

More information

INTERIOR WALLS OVER SOLID BACKING

INTERIOR WALLS OVER SOLID BACKING INTERIOR WALLS OVER SOLID BACKING Mortar Bed (One-Coat Method) Stone Tile MAPEI: MW222-Stone TCNA: W222-15-Stone TTMAC: N/A Version: 2015 SOLID BACKING: WOOD, PLASTER, MASONRY, OR GYPSUM BOARD STONE TILE

More information

SECTION RESILIENT FLOORING ACCESSORIES

SECTION RESILIENT FLOORING ACCESSORIES SECTION 09653 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section shall include all materials and installation necessary to provide Resilient Wall Base and Accessories, including resilient

More information

Fiber Reinforced Tile and Stone Mortar

Fiber Reinforced Tile and Stone Mortar , ANSI A 118.4, ANSI A 118.11 ARDEX X 77 MICROTEC Fiber Reinforced Tile and Stone Mortar The most advanced technology ideal for large format porcelain tile installations,exterior or interior, floor or

More information

SECTION STONE FLOORING

SECTION STONE FLOORING PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 09 63 40 STONE FLOORING SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph not applicable in the section and

More information

Paragraph Description Page No General Materials Concrete Masonry Work Altitude Valve Vault Cover 25-4

Paragraph Description Page No General Materials Concrete Masonry Work Altitude Valve Vault Cover 25-4 City of Columbia Engineering Regulations PART 25: SPECIFICATIONS FOR ALTITUDE VALVE VAULT Table of Contents Paragraph Description Page No. 25.1 General 25-1 25.2 Materials 25-1 25.3 Concrete Masonry Work

More information

Installation Standard For TILE-LINED ROMAN BATH TUBS IAPMO IS (10) Wall Finish. (3) Test Required. (2) Waterproof. Tile. (8) Concrete Shell

Installation Standard For TILE-LINED ROMAN BATH TUBS IAPMO IS (10) Wall Finish. (3) Test Required. (2) Waterproof. Tile. (8) Concrete Shell Installation Standard For TILE-LINED ROMAN BATH TUBS IAPMO IS 2-2003 (9) Ceramic Tile Floor Set in Portland Cement Mortar Sub-Floor & Building Felt 2 x 6 Floor Furring Wood Floor Joists Deflection of floor

More information

SECTION LATEX-MODIFIED MEDIUM BED MORTAR

SECTION LATEX-MODIFIED MEDIUM BED MORTAR SECTION 09305.24 LATEX-MODIFIED MEDIUM BED MORTAR This product guide specification can be used to specify Hydroment Big Tile & Stone Mortar, a latex-modified, medium bed mortar designed for setting large

More information

CONSTRUCTION STANDARDS PAGE

CONSTRUCTION STANDARDS PAGE CONSTRUCTION STANDARDS PAGE 093400-1 SECTION 093400 PART 1 - GENERAL 1.1 M.S.U. ISSUES A. Typical locations for wet area ceramic tile installation include areas such as swimming pools, showers, toilets,

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 096623 - RESINOUS MATRIX TERRAZZO FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Master Specifications for Microcotta November 2017

Master Specifications for Microcotta November 2017 SECTION 042130 - MICROCOTTA PART 1 - GENERAL 1.1 SUMMARY A. Provide Architectural Microcotta, cast architectural polymer resin units manufactured in accordance with the Contract Documents. 1.2 WORK INCLUDED

More information

SECTION UNIT PAVERS

SECTION UNIT PAVERS PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Concrete pavers. 2. Detectable warning pavers. 3. Warning stripe pavers. 1.2 SUBMITTALS A. Product Data: For the following: 1. Pavers.

More information

A. Section includes cast-in-place concrete, including reinforcement, concrete materials, mixture design, placement procedures, and finishes.

A. Section includes cast-in-place concrete, including reinforcement, concrete materials, mixture design, placement procedures, and finishes. SECTION 033053 - CONCRETE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

STEAM SHOWER / ROOM; WOOD OR METAL STUDS Wood or Metal Studs Cement Backer Board Walls, Mortar Bed Floor Ceramic Tile

STEAM SHOWER / ROOM; WOOD OR METAL STUDS Wood or Metal Studs Cement Backer Board Walls, Mortar Bed Floor Ceramic Tile STEAM SHOWER / ROOM; WOOD OR METAL STUDS Wood or Metal Studs Cement Backer Board Walls, Mortar Bed Floor Ceramic Tile MAPEI: MSR614 TCNA: SR614-13 TTMAC: 321SR-B SLOPED CEILING 2" (50 mm) PER FOOT CEMENT

More information

California Architectural Pavers for Mortar-Set Concrete Tiling Installations

California Architectural Pavers for Mortar-Set Concrete Tiling Installations The following specification refers to the Stepstone, Inc. product known as: California Architectural Pavers for Mortar-Set Concrete Tiling Installations Stepstone, Inc. also manufactures California Architectural

More information

CSI GUIDE Countertops

CSI GUIDE Countertops CSI GUIDE Countertops Part 1 General 1.0 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification Sections, apply

More information

SECTION DRY-PLACED GRANITE

SECTION DRY-PLACED GRANITE SECTION 04 41 11 DRY-PLACED GRANITE This guide specification utilizes recommendations and formats contained in references of the Construction Specifications Institute (CSI), including the CSI Practice

More information

ARCHITECTURAL GUIDE SPECIFICATIONS

ARCHITECTURAL GUIDE SPECIFICATIONS ARCHITECTURAL GUIDE SPECIFICATIONS MANNINGTON COLORSCAPE, COLORSPEC, & ONE-STEP STAIR TREADS Section 09 65 13.23 Resilient Stair Treads [Thermoset Rubber Type TS] Created November, 2008 Mannington Mills,

More information

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION

More information

SECTION RESINOUS FLOORING

SECTION RESINOUS FLOORING SECTION 09705 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section includes all materials and installation necessary to provide resinous flooring system with integral cove base and top finish

More information

Interior Finish Materials

Interior Finish Materials Ceramic Tile Ceramic tiles are relatively small, modular surfacing units made of clay or other ceramic material The tiles are fired in a kiln at very high temperatures The result is a durable, dense material

More information

327 King Street Exterior Repairs & Interior Renovations Project No. H15-N200-PG

327 King Street Exterior Repairs & Interior Renovations Project No. H15-N200-PG StudioA Architecture ADDENDUM NO. 2 Date: 11 October 2013 Re: 327 King Street Exterior Repairs & Interior Renovations Project No. H15-N200-PG From: Whitney Powers To: Bidders/Planholders This Addendum

More information

DuChâteau Concrete DeLuxe Wide-Plank Flooring Installation Instructions

DuChâteau Concrete DeLuxe Wide-Plank Flooring Installation Instructions DuChâteau Concrete DeLuxe Wide-Plank Flooring Installation Instructions DuChâteau Concrete DeLuxe Installation Guidelines are intended to offer general guidance as it relates to DuChâteau Concrete DeLuxe

More information

CDK Neolith Reduced Thickness Porcelain Panel Installation Specification.

CDK Neolith Reduced Thickness Porcelain Panel Installation Specification. CDK Neolith Reduced Thickness Porcelain Panel Installation Specification. This specification covers the installation of Neolith Reduced Thickness Porcelain Panel to concrete or other suitable masonry substrates.

More information

SECTION POLYACRYLATE MODIFIED CEMENTITIOUS TERRAZZO FLOORING

SECTION POLYACRYLATE MODIFIED CEMENTITIOUS TERRAZZO FLOORING SECTION 09 66 23.13 POLYACRYLATE MODIFIED CEMENTITIOUS TERRAZZO FLOORING THIS GUIDE SPECIFICATION HAS BEEN PREPARED BY THE NATIONAL TERRAZZO AND MOSAIC ASSOCIATION, INC., AND IS DISTRIBUTED FOR USE BY

More information

ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE

ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE MANNINGTON COLORFIELDS SHEET RUBBER FLOORING Section 09 65 16 Sheet rubber Flooring (Thermoset Rubber) Created May 2012 Mannington Mills, Inc. P. O. Box

More information

SECTION Specification for Building Limes Specification For Building Sands from Natural Sources Methods of Tests for Paints.

SECTION Specification for Building Limes Specification For Building Sands from Natural Sources Methods of Tests for Paints. SECTION 09200 PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The extent of lath and plaster work is shown on the drawings and in schedules and includes interior and exterior plaster work, and fibreglass

More information

2. In moist areas, portland cement plaster should be used if a more permanent material is not within budget limits.

2. In moist areas, portland cement plaster should be used if a more permanent material is not within budget limits. UDIVISION 9 FINISHES 09 00 00 FINISHES 09 20 00 PLASTER AND GYPSUM BOARD PLASTER 1. Major partitions are to extend to underside of structure as required by code. Allow for structural deflection. Provide

More information

SECTION WALL AND DOOR PROTECTION

SECTION WALL AND DOOR PROTECTION PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 26 00 WALL AND DOOR PROTECTION SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable to

More information

Sample Specification

Sample Specification Sample Specification Enclosed is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry

More information

Sample Specifications

Sample Specifications Sample Specifications Below is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry tile

More information

ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish

ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish SECTION 03 01 30 MAINTENANCE OF CAST-IN-PLACE CONCRETE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings, general provisions of the Contract,

More information

SECTION ORNAMENTAL ALUMINUM RAILING

SECTION ORNAMENTAL ALUMINUM RAILING SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Pipe Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in concrete.

More information

POOLS AND WATER FEATURES Concrete Tank Cementitious Waterproofing Bonded Mortar Bed Concrete, Ceramic Tile

POOLS AND WATER FEATURES Concrete Tank Cementitious Waterproofing Bonded Mortar Bed Concrete, Ceramic Tile POOLS AND WATER FEATURES Concrete Tank Cementitious Waterproofing Bonded Mortar Bed Concrete, Ceramic Tile MAPEI: MP602 TCNA: P602-13 TTMAC: 317S-P ALTERNATE DECK PROFILE COPING / DECKING CERAMIC TILE

More information

SECTION CERAMIC TILING

SECTION CERAMIC TILING SECTION 093013 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to

More information

ARDEX X 32 MICROTEC Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar

ARDEX X 32 MICROTEC Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar ANSI A 118.15, ANSI A 118.4, ANSI A 118.11 ARDEX X 32 MICROTEC Universal Rapid Setting and Drying Thin-to-Thick Bed Mortar The fast track, interior or exterior, thin-to-thick bed solution for every natural

More information

Schluter -DITRA-DRAIN

Schluter -DITRA-DRAIN INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE THIN-BED DRAINAGE, VENTILATION, UNCOUPLING, AND SUPPORT/LOAD DISTRIBUTION Application and Function 6.2 Schluter -DITRA-DRAIN is a drainage membrane designed

More information

Section QUARTZ SURFACING COUNTERTOPS

Section QUARTZ SURFACING COUNTERTOPS Pental Quartz is a quartz-composite engineered stone that is suitable for virtually any interior surfacing application. Pental Quartz can be used for kitchen countertops, bathroom vanities, bar tops, wall

More information

SECTION RESILIENT TILE FLOORING. A. Section includes vinyl composition floor tile and accessories indicated and as specified.

SECTION RESILIENT TILE FLOORING. A. Section includes vinyl composition floor tile and accessories indicated and as specified. SECTION 09 65 19 RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 SUMMARY A. Section includes vinyl composition floor tile and accessories indicated and as specified. 1.2 SUBMITTALS A. Product Data: Submit

More information

Spec Master 5/7/ For each product requiring color and texture selection, provide full size samples.

Spec Master 5/7/ For each product requiring color and texture selection, provide full size samples. SECTION 04812 (042012) MECHANICALLY ATTACHED BRICK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

SECTION GLASS UNIT MASONRY ASSEMBLIES

SECTION GLASS UNIT MASONRY ASSEMBLIES PART 1 GENERAL 1.01 SCOPE OF WORK A. The Contractor shall furnish and install all materials, labor, equipment and incidentals required to install glass unit masonry as shown on the contract drawings and

More information

B. Store products in dry spaces protected from the weather, with ambient temperatures maintained between 50 and 90 deg F (10 and 32 deg C).

B. Store products in dry spaces protected from the weather, with ambient temperatures maintained between 50 and 90 deg F (10 and 32 deg C). SECTION 09651 - RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information