University Apartments on Brooklyn PROJECT MANUAL

Size: px
Start display at page:

Download "University Apartments on Brooklyn PROJECT MANUAL"

Transcription

1 Section Horizontal Louver Blinds University Apartments on Brooklyn PART 1 - GENERAL 1.1 SECTION INCLUDES A. Horizontal slat louver blinds. B. Operating hardware. 1.2 RELATED SECTIONS A. Section Rough Framing 1.3 REFERENCES A. FS AA-V Venetian Blinds. 1.4 SYSTEM DESCRIPTION A. Horizontal metal slat louver blinds installed at window openings, manual control of raising and lowering by cord; blade angle adjustable by control wand. 1.5 SUBMITTALS A. Submit shop drawings under provisions of Section B. Submit shop drawings indicating opening sizes, tolerances required, and installation of blind at window opening, method of attachment, clearances, and operation. Manufacturer/installer should field verify window measurements. C. Submit product data under provisions of Section D. Submit product data indicating physical and dimensional characteristics, operating features, E. Submit samples under provisions of Section F. Submit one sample 12 inches long illustrating slat materials and finish, color, cord type, and color. HORIZONTAL LOUVER BLINDS

2 1.6 QUALITY ASSURANCE A. Manufacturer: Company specializing in manufacturing the products specified in this Section with three years documented experience. 1.7 DELIVERY, STORAGE, AND HANDLING A. Deliver products to site B. Deliver blinds wrapped and crated in a manner to prevent damage to components or marring of surfaces. C. Store and protect products D. Store in a clean, dry area, laid flat and blocked off ground to prevent sagging, twisting, or warping. 1.8 EXTRA MATERIALS A. Furnish ten additional slats under provisions of Section B. Furnish two additional complete blind assemblies of each size. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Levelor. B. Substitutions: Under provisions of Section MATERIALS A. Louver Slats: One inch wide; spring tempered prefinished aluminum horizontal slats, with manufacturing burrs removed; radiused slat corners. B. Slat Support: Woven polypropylene, ladder configuration. C. Head Rail Housing: Prefinished, formed steel box, internally fitted with hardware, pulleys and bearings for blind operation. Provide head valance. D. Cord: Braided nylon, continuous loop. E. Control Wand: Extruded hollow plastic, round shape, removable type, and length of window opening height less 12 inches. HORIZONTAL LOUVER BLINDS

3 F. Accessory Hardware: Type recommended by blind manufacturer. 2.3 FACTORY FINISHING A. Blind Slat and Head Rail Housing: Color as selected. B. Cord and Control Wand: color as selected. PART 3 - EXECUTION 3.1 EXAMINATION A. Verify that surfaces and openings are ready to receive the work. B. Do not commence fabrication until field measurements are confirmed. C. Ensure structural supports are correctly placed. D. Beginning of installation means installer accepts existing substrate. END OF SECTION HORIZONTAL LOUVER BLINDS

4 Section Residential Casework University Apartments on Brooklyn PART 1 - GENERAL 1.1 WORK INCLUDED A. Production manufactured casework including hardware. B. Countertops. C. Kitchen cabinets and bathroom vanities. D. Post formed countertops and backsplash. E. Shelves indicated with plastic laminate finish. F. Murphy beds 1.2 RELATED WORK A. Section Rough carpentry B. Section Finish Carpentry for closet doors. C. Section Joint Sealers. D. Section Toilet and Bath Accessories. 1.3 MOCKUP A. Prepare a minimum of one (1) complete kitchen and bathroom vanity mockup under provisions of Section at location to be designated by owner. B. Provide sample base cabinet, upper cabinet, countertop, with hardware installed. C. Accepted units will establish minimum standard of quality for the work. D. Approved units may become part of the Work. 1.4 SUBMITTALS A. Submit product data under provisions of Section B. Include components dimensions, profiles, finishes, and hardware. RESIDENTIAL CASEWORK

5 C. Submit samples under provisions of Section D. Submit two samples 12 x 24 inches in size illustrating finishes, colors, trim. PART 2 - PRODUCTS 2.1 ACCEPTABLE MANUFACTURERS CABINETS AND TOPS A. Lanz Cabinets, 3025 West 7th Place, Eugene, OR (800) Frameless Euroscapes line, flush cabinet and drawer fronts, full coverage B. Substitutions: Under provisions of Section MATERIALS A. Cabinet Construction: Melamine covered ¾ particle board dowel and glue. B. Front frame: None C. Doors and Drawer Fronts: Thermofoil. D. Shelves and Cabinets Interiors: Melamine covered ¾ particle board. E. Shelf Support: Metal pins in drilled system holes. F. Drawer Construction: ½ Melamine particle board G. Drawer guide: Epoxy coat standard extension side-mount with 75 lb rating H. Hinges: Salice 110 euro full-overlay concealed clip hinge I. Countertops and Ledges: Plastic laminate Wilsonart or equal. 2.3 HARDWARE A. Shelf Standards and Clips, Drawer Guides, Spring-loaded Door Hinges, Catches, Door and Drawer Handles: Manufacturer's standard type, color approved by Architect/Owner. 2.4 ACCESSORIES A. Adhesive: Type to suit application. RESIDENTIAL CASEWORK

6 2.5 FABRICATION A. Fabricate casework to ensure durable and rigid unit and to permit plumb and level site installation. B. Align adjoining units for site assembly modules, to achieve tight hairline joints. C. Prepare units with anchor devices to permit ease of site assembly. D. Prepare countertops with joint devices to ensure hairline site joints. E. Provide cutouts for plumbing fixtures, inserts, appliances, outlet boxes, and other fixtures and fittings. Verify locations of cutouts from on-site dimensions. Seal contact surfaces of cut edges. 2.6 FINISHES A. Sand work smooth and set exposed fasteners. Apply wood filler in exposed fastener indentations. B. Finish all exposed exterior and interior surfaces. C. Colors: Selected from manufacturer's standard colors by Owner. 2.7 FOLDING WALL BED A. Basis of Design: Murphy Bed Deluxe model double sized bed DE-54. Size: 54 x 75, requiring clear opening of 57 x 16 depth x 80 vertical opening. PART 3 - EXECUTION 3.1 PREPARATION A. Verify existing surfaces are ready to receive work of this section. Beginning of installation means acceptance of existing substrate. 3.2 INSTALLATION A. Set and secure casework in place rigid, plumb, and level. B. Use purpose designed fixture attachments for wall mounted components. C. Permanently fix cabinet and counter bases to floor using appropriate angles and anchorages. RESIDENTIAL CASEWORK

7 D. Carefully scribe casework which abuts other building materials, leaving gaps of 1/32 inch maximum. E. Scribe strips not to exceed cover caps in excess of 1/2 inch. F. Spread adhesive to smooth level surface, and firmly attach plastic. G. Remove all excess adhesive from surrounding walls. H. Caulk all gaps between work and adjacent surfaces. END OF SECTION RESIDENTIAL CASEWORK

8 Section Entrance Floor Mats And Frames PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Roll-up rail mats. 2. Resilient entrance mats. 3. [Recessed] [Surface-mounted] frames. 1.2 ACTION SUBMITTALS A. Product Data: For each type of product. B. Shop Drawings: 1. Items penetrating floor mats and frames, including door control devices. 2. Divisions between mat sections. 3. Perimeter floor moldings. 4. Custom Graphics: Scale drawing indicating colors. C. Samples: For each floor mat, tread rail, and frame member. 1.3 CLOSEOUT SUBMITTALS A. Maintenance data. PART 2 - PRODUCTS 2.1 ENTRANCE FLOOR MATS AND FRAMES, GENERAL A. Regulatory Requirements: Comply with applicable provisions in the U.S. Architectural & Transportation Barriers Compliance Board's ADA-ABA Accessibility Guidelines for Buildings and Facilities and ICC A B. Carpet-Type Mats: Nylon carpet bonded to 1/8- to 1/4-inch- (3.2- to 6.4-mm-) thick, flexible vinyl backing to form mats 3/8 or 7/16 inch (9.5 or 11 mm) thick with nonraveling edges. 1. Colors, Textures, and Patterns: Match Architect's sample. 2. Mat Size: As indicated. ENTRANCE FLOOR MATS AND FRAMES

9 C. Graphics: Custom inlaid or woven-in graphic as indicated. 2.2 FRAMES A. Recessed Frames: ASTM B 221 (ASTM B 221M). Manufacturer's standard extrusion. 1. Color: Match Architect's sample. 2.3 FABRICATION A. Floor Mats: Shop fabricate units to greatest extent possible in sizes indicated. Unless otherwise indicated, provide single unit for each mat installation; do not exceed manufacturer's recommended maximum sizes for units that are removed for maintenance and cleaning. Where joints in mats are necessary, space symmetrically and away from normal traffic lanes. Miter corner joints in framing elements with hairline joints or provide prefabricated corner units without joints. B. Coat concealed surfaces of aluminum frames that contact cementitious material with manufacturer's standard protective coating. PART 3 - EXECUTION 3.1 INSTALLATION A. Install recessed mat frames to comply with manufacturer's written instructions. Set mat tops at height recommended by manufacturer for most effective cleaning action; coordinate tops of mat surfaces with bottoms of doors that swing across mats to provide clearance between door and mat. B. Install surface-type units to comply with manufacturer's written instructions at locations indicated; coordinate with entrance locations and traffic patterns. 3.2 PROTECTION A. After completing frame installation and concrete work, provide temporary filler of plywood or fiberboard in recesses and cover frames with plywood protective flooring. Maintain protection until construction traffic has ended and Project is near Substantial Completion. END OF SECTION ENTRANCE FLOOR MATS AND FRAMES

A. WCMA A Safety of Corded Window Covering Products; Window Covering Manufacturers Association; (ANSI/WCMA A101.1)

A. WCMA A Safety of Corded Window Covering Products; Window Covering Manufacturers Association; (ANSI/WCMA A101.1) SECTION 12 21 14 VERTICAL LOUVER BLINDS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Vertical slat louver blinds and operating hardware. 1.2 REFERENCE STANDARDS A. WCMA A100.1 - Safety of Corded Window Covering

More information

SECTION RESIDENTIAL CASEWORK

SECTION RESIDENTIAL CASEWORK PART1 GENERAL 1.01 SECTION INCLUDES A. Vanity cabinets. B. Toilet room casework. C. Casework hardware. 1.02 RELATED REQUIREMENTS A. Section 12 36 00 - Countertops. 1.03 REFERENCE STANDARDS SECTION 12 35

More information

SECTION (06415) - PLASTIC COUNTERTOPS

SECTION (06415) - PLASTIC COUNTERTOPS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: SECTION 12 36 23 (06415) - PLASTIC COUNTERTOPS 1. Plastic Laminate a. Countertops and Backsplashes b. Aprons B. Related Sections: 1.02 REFERENCES 1. Section

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 12 2113 - LOUVER BLINDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

SECTION FOLDING ALUMINUM FRAMED WALL SYSTEM

SECTION FOLDING ALUMINUM FRAMED WALL SYSTEM SECTION 08417 FOLDING ALUMINUM FRAMED WALL SYSTEM PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Folding aluminum framed door system. 2. Door hardware. 3. Glass. 1.2 SYSTEM DESCRIPTION A. Aluminum-framed

More information

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION

More information

SECTION PLASTIC-LAMINATE-CLAD COUNTERTOPS

SECTION PLASTIC-LAMINATE-CLAD COUNTERTOPS SECTION 12 3623.13 - PLASTIC-LAMINATE-CLAD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION STEEL HEALTHCARE CASEWORK

SECTION STEEL HEALTHCARE CASEWORK SECTION 12 35 70.01 STEEL HEALTHCARE CASEWORK This guide specification has been prepared by InnerSpace Corporation to assist design professionals in the preparation of a specification section covering

More information

SECTION ACCORDION FOLDING PARTITIONS

SECTION ACCORDION FOLDING PARTITIONS PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

SECTION IMPACT RESISTANT WALL PROTECTION

SECTION IMPACT RESISTANT WALL PROTECTION SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,

More information

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017 SECTION 10 2113.19 - PLASTIC TOILET COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

SECTION ROUGH CARPENTRY. B. AWPA (American Wood Preservers Association) Book of Standards. C. WCLIB (West Coast Lumber Inspection Bureau)

SECTION ROUGH CARPENTRY. B. AWPA (American Wood Preservers Association) Book of Standards. C. WCLIB (West Coast Lumber Inspection Bureau) SECTION 06112 ROUGH CARPENTRY PART 1 GENERAL 1.01 REFERENCES A. APA (American Plywood Association) B. AWPA (American Wood Preservers Association) Book of Standards C. WCLIB (West Coast Lumber Inspection

More information

1. Standard two tier metal lockers and metal base.

1. Standard two tier metal lockers and metal base. SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

SECTION ALUMINUM-FRAMED HIGH PERFORMANCE THERMAL ENTRANCE DOORS

SECTION ALUMINUM-FRAMED HIGH PERFORMANCE THERMAL ENTRANCE DOORS PART 1 GENERAL SECTION 08 1116 ALUMINUM-FRAMED HIGH PERFORMANCE THERMAL ENTRANCE DOORS 1.01 SECTION INCLUDES A. Aluminum-framed storefront, with vision glass. B. Infill panels of glass. C. Aluminum doors

More information

DIVISION 10 SPECIALTIES SECTION METAL LOCKERS

DIVISION 10 SPECIALTIES SECTION METAL LOCKERS DIVISION 10 SPECIALTIES SECTION 10 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING

SECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING 7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes

More information

SECTION GYPSUM BOARD & SHEATHING SYSTEMS

SECTION GYPSUM BOARD & SHEATHING SYSTEMS PART 1!GENERAL! 1.01! SECTION INCLUDES SECTION 09260 GYPSUM BOARD & SHEATHING SYSTEMS! Metal stud wall framing. Metal channel ceiling framing.! Gypsum board.! Sheathing.! Taped and sanded joint treatment.!

More information

Façade Architectural Wall Panel System - Guide Specification 3/11/2017 SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.

Façade Architectural Wall Panel System - Guide Specification 3/11/2017 SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1. SECTION 09 7710 FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Decorative ½ / ¾ (13mm/19mm) thick prefinished panel with preengineered attachment clip along with hardware

More information

SECTION ALUMINUM HANDRAIL SYSTEMS

SECTION ALUMINUM HANDRAIL SYSTEMS SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American

More information

DIVISION VIII - DOORS AND WINDOWS

DIVISION VIII - DOORS AND WINDOWS DIVISION VIII - DOORS AND WINDOWS SECTION 08121 INTERIOR ALUMINUM DOORS, DOOR FRAMES, AND OFFICE FRONT FRAMING (SOLUTIONS II SYSTEM) PART 1 - GENERAL 1.01 SUMMARY A. Related Documents: Provisions established

More information

Tender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1

Tender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1 Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Extruded aluminum windows with fixed sash..2 Factory glazed..3 Perimeter sealant. 1.2 RELATED SECTIONS.1 Section 05500 - Metal Fabrications.2

More information

10331 Date Street Murrieta, CA SECTION HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS

10331 Date Street Murrieta, CA SECTION HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS 09/20/2017 10331 Date Street Murrieta, CA 92562 info@foremanproducts.com 951-677-1955 SECTION 10 5130 HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS PART 1 GENERAL Specifier Notes: This product specification

More information

SECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING

SECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING 7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes

More information

Marlite Guide Specification 2/24/2017 Surface Systems - MAP375 System SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1.

Marlite Guide Specification 2/24/2017 Surface Systems - MAP375 System SECTION FRAMED DECORATIVE PANEL SYSTEMS PART 1 - GENERAL 1. Note: This document contains information and notes in hidden text. If you need assistance to view & hide text, instructions are at this link: http://www.marlite.com/hidden-notes-instructions.aspx Delete

More information

SECTION Summit Phenolic Lockers (Solid Phenolic Lockers)

SECTION Summit Phenolic Lockers (Solid Phenolic Lockers) SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with

More information

A. Section includes interior woodwork for the following applications:

A. Section includes interior woodwork for the following applications: SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork for the following applications: 1. Wood cabinets. 2. Plastic-laminate cabinets. 3. Solid-surfacing-material

More information

Framed Decorative Panel Systems

Framed Decorative Panel Systems Note: This document contains information and notes in hidden text. If you need assistance to view & hide text, instructions are at this link: http://www.marlite.com/hidden-notes-instructions.aspx Delete

More information

Northpointe Renovation EPN #1701 F/A Prroject #17027 September 8, 2017

Northpointe Renovation EPN #1701 F/A Prroject #17027 September 8, 2017 SECTION 101423.16 - ROOM-IDENTIFICATION PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011. DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:

More information

SECTION PHENOLIC LOCKERS AND BENCHES. B. Section Gypsum Board Area Separation Wall Assemblies.

SECTION PHENOLIC LOCKERS AND BENCHES. B. Section Gypsum Board Area Separation Wall Assemblies. SECTION 10 51 29 PHENOLIC LOCKERS AND BENCHES PART 1 GENERAL 1.1 SECTION INCLUDES A. Phenolic lockers, hardware and accessories. B. Phenolic pedestal benches. C. Phenolic cubbies. 1.2 RELATED SECTIONS

More information

SECTION FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND

SECTION FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND SECTION 08352 FOLDING DOORS AMSTEL AS900CC DIVIDER SOUND THREE PART SHORT FORM SPECIFICATIONS (CSI) PART 1 GENERAL 1.1 SUMMARY A. Section Includes: manually operated, side folding accordion- type products

More information

SECTION FLOOR MATS AND FRAMES

SECTION FLOOR MATS AND FRAMES Section 12484 Floor Mats and Frames SECTION 12484 - FLOOR MATS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 102239 - FOLDING PANEL PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification

More information

Architectural Wall Products Guide Specifications

Architectural Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is

More information

Trex Commercial Products page Metal Railing

Trex Commercial Products page Metal Railing SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post Rail (Glass). D. Tensiline Railings (Cable). E. Track Rail (Glass).

More information

Key Features. Glass Locker Series GL5000. ¼ inch tempered glass doors with soft closing hinges. Back-painted glass can be matched to any Pantone color

Key Features. Glass Locker Series GL5000. ¼ inch tempered glass doors with soft closing hinges. Back-painted glass can be matched to any Pantone color Glass Locker Series GL5000 Key Features ¼ inch tempered glass doors with soft closing hinges Back-painted glass can be matched to any Pantone color Low iron glass for ultra-clear, pure colors Wood locker

More information

SECTION METAL LOCKERS

SECTION METAL LOCKERS PART 1 GENERAL 1.1 DESCRIPTION SECTION 10 51 13 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other items or paragraphs not applicable

More information

SECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Post

More information

CONSULT COLDSPRING FOR ASSISTANCE IN EDITING THIS SPECIFICATION GUIDE FOR SPECIFIC APPLICATIONS.

CONSULT COLDSPRING FOR ASSISTANCE IN EDITING THIS SPECIFICATION GUIDE FOR SPECIFIC APPLICATIONS. SECTION NUMBERS AND TITLES IN THIS SPECIFICATION UTILIZE MASTERFORMAT 2004. THIS SPECIFICATION GUIDE IS WRITTEN ACCORDING TO THE CONSTRUCTION SPECIFICATIONS INSTITUTE (CSI) THREE-PART SECTION FORMAT (1998)

More information

Missouri S&T Bullman Showers Date: February 13, 2017 Project No SECTION PLASTIC SHOWER AND DRESSING COMPARTMENTS

Missouri S&T Bullman Showers Date: February 13, 2017 Project No SECTION PLASTIC SHOWER AND DRESSING COMPARTMENTS SECTION 102116.19 - PLASTIC SHOWER AND DRESSING COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

More information

Section PANEL SIGNAGE

Section PANEL SIGNAGE Section 10 14 23 PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including FDOT DIVISION I GENERAL REQUIREMENTS & COVENANTS Specification Sections,

More information

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number: SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 SUBMITTALS A. Product Data: For each type of

More information

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate. SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Welded stainless steel railing systems. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete; coordination with substrate.

More information

MARQUIS Tualatin FIBER-CEMENT SIDING June 15, rev

MARQUIS Tualatin FIBER-CEMENT SIDING June 15, rev PART 1 - GENERAL 1.1 SUMMARY A. This Section includes: 1. Reinforced fiber-cement shingle panel siding, 2. Reinforced fiber-cement lap siding. B. Related Sections: 1. Division 1 Section "Quality Requirements"

More information

SECTION PASS WINDOWS. 1.1 SUMMARY A. Section Includes: 1. Factory finished sliding glass, counter mounted pass windows.

SECTION PASS WINDOWS. 1.1 SUMMARY A. Section Includes: 1. Factory finished sliding glass, counter mounted pass windows. SECTION 08 56 19 PASS WINDOWS SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Factory finished

More information

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work. SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

SECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

SECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS SECTION 08 4113 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Aluminum entrance doors and frames. 2. Glass infill panels. 3. Door hardware. B. Related Sections:

More information

1. Division 01: Administrative, procedural, and temporary work requirements.

1. Division 01: Administrative, procedural, and temporary work requirements. SECTION 10 2219 DEMOUNTABLE PARTITIONS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Demountable partition system. 2. Doors. 3. Glazed panels. B. Related Sections: 1. Division 01: Administrative,

More information

ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE

ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE MANNINGTON COLORFIELDS SHEET RUBBER FLOORING Section 09 65 16 Sheet rubber Flooring (Thermoset Rubber) Created May 2012 Mannington Mills, Inc. P. O. Box

More information

SECTION TRESPA ATHLON SOLID COMPOSITE CASEWORK

SECTION TRESPA ATHLON SOLID COMPOSITE CASEWORK SECTION 064115 TRESPA ATHLON SOLID COMPOSITE CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Solid composite casework. 1.02 RELATED SECTIONS A. Documents affecting work in this section includes but is

More information

SECTION GYPSUM BOARD ASSEMBLIES

SECTION GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 09260 - A. Metal stud wall framing. Denoted on drawings as "metal studs". B. Metal channel ceiling framing. C. Acoustic insulation and sealant. D. Cementitious

More information

Wood and Plastic Laminate Casework Latest revision: October 23, 2014

Wood and Plastic Laminate Casework Latest revision: October 23, 2014 This guide spec is intended to be used with Architectural Woodwork Standards the quality standard published by the Woodwork Institute, Architectural Woodwork Institute, and the Architectural Woodwork Manufacturer

More information

SECTION PREHUNG WOOD DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION PREHUNG WOOD DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08 14 00 PREHUNG WOOD DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2014-2016 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. French Doors.

More information

ENTRANCE MATS & GRIDS

ENTRANCE MATS & GRIDS 152 Rollins Avenue #102 Rockville, MD 20852 800-762-9010 240-780-3309 (f) http://www.americanfloormats.com ENTRANCE MATS & GRIDS PART I - GENERAL 1.01 Summary A. This section includes the following types

More information

SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651

SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651 SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows

More information

SECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION HANDRAILS AND RAILINGS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 05520 HANDRAILS AND RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Classic Railings (Picket). B. GridGuard Railings (Mesh). C. Invisirail

More information

SECTION ALUMINUM WINDOWS

SECTION ALUMINUM WINDOWS SECTION 08520 ALUMINUM WINDOWS 1. PART 1 GENERAL 1.1 WORK INCLUDED: 1. Provide labor, material, equipment and services to furnish and install aluminum windows shown on drawings and specified herein. Window

More information

SECTION WALL AND DOOR PROTECTION

SECTION WALL AND DOOR PROTECTION PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 26 00 WALL AND DOOR PROTECTION SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable to

More information

A2.0 TRIPLE M DEVELOPMENT EXTERIOR ELEVATIONS. Rochester, MN Hwy 52 North. Apr 07, phone fax

A2.0 TRIPLE M DEVELOPMENT EXTERIOR ELEVATIONS. Rochester, MN Hwy 52 North. Apr 07, phone fax NORTH ELEVATION 1 1/8" = 1'-0" WEST ELEVATION 2 1/8" = 1'-0" SOUTH ELEVATION 3 1/8" = 1'-0" EXTERIOR ELEVATIONS A2.0 EAST ELEVATION 4 1/8" = 1'-0" EXTERIOR FRAME TYPES 1 1/4" = 1'-0" 2 INTERIOR FRAME TYPES

More information

5. Division 9 Section "Site-Built Stretched Fabric Wall System" for site-built stretched fabric

5. Division 9 Section Site-Built Stretched Fabric Wall System for site-built stretched fabric Section 097714 Medium-Tension Fabric Wall System [SnapLoc ] Part 1 General 1.1 Related Documents A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Rytec Corporation One Cedar Parkway Jackson, WI GO-RYTEC (262)

Rytec Corporation One Cedar Parkway Jackson, WI GO-RYTEC (262) Rytec Corporation One Cedar Parkway Jackson, WI 53037 1-888-GO-RYTEC (262) 677-9046 WWW.Rytecdoors.com Pharma-Swing Model Number PSW12002 SECTION 08300 HIGH PERFORMANCE FIBERGLASS SWING DOOR PAIR PART

More information

SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter

More information

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments.

SECTION TOILET PARTITIONS. A. Section Structural Steel: Supports for ceiling hung compartments. SECTION 10155 TOILET PARTITIONS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel toilet compartments. 1.2 RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for ceiling hung compartments.

More information

SUGGESTED SPECIFICATION SECTION ENTRANCE FLOOR MATS AND FRAMES

SUGGESTED SPECIFICATION SECTION ENTRANCE FLOOR MATS AND FRAMES Note: After downloading this spec, the Specifier must choose the correct Finish, Insert and Frame options and delete all other options to produce an accurate specification. DesignStep (BR) SUGGESTED SPECIFICATION

More information

SECTION POLYPROPYLENE FABRIC WALL COVERING

SECTION POLYPROPYLENE FABRIC WALL COVERING PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 09 72 31 POLYPROPYLENE FABRIC WALL COVERING SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. Also delete any other item or paragraph not

More information

SECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS

SECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,

More information

A. Product Data: For each type of product, including panel products, high-pressure decorative laminate, adhesive for bonding plastic laminate.

A. Product Data: For each type of product, including panel products, high-pressure decorative laminate, adhesive for bonding plastic laminate. SECTION 123623 - PLASTIC-LAMINATE-CLAD COUNTERTOPS PART 1 - GENERAL 1.I RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Specification Section Storefront Systems has been revised. Omit previously issued Storefront section.

Specification Section Storefront Systems has been revised. Omit previously issued Storefront section. December 28, 2018 ADDENDUM NO. 2 To: Re: Bidders Corey Pitts, NewQuest Properties This Addendum forms a part of the contract documents identified above. Acknowledge the receipt of this Addendum on the

More information

LINEAR METAL CEILINGS Section

LINEAR METAL CEILINGS Section PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700

PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700 SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

A. Access doors and frames are part of an access door and frame allowance.

A. Access doors and frames are part of an access door and frame allowance. SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION VISUAL DISPLAY BOARDS

SECTION VISUAL DISPLAY BOARDS SECTION 101000 VISUAL DISPLAY BOARDS THIS SECTION IS WRITTEN IN CSI 3-PART FORMAT AND IN CSI PAGE FORMAT; NOTES TO THE SPECIFIER (IN BLUE), SHOULD BE DELETED PRIOR TO PUBLICATION. PART 1 GENERAL 1.01 SUMMARY

More information

SECTION STILE AND RAIL WOOD DOORS

SECTION STILE AND RAIL WOOD DOORS SECTION 08 1433 NOTE: THIS SECTION USES THE TERM "ARCHITECT." CHANGE THIS TERM TO IDENTIFY THE DESIGN PROFESSIONAL AS DEFINED IN THE AGREEMENT OR GENERAL CONDITIONS OF THE CONTRACT. PART 1 GENERAL 1.01

More information

SECTION FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES

SECTION FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES SECTION 081613 FIBERGLASS REINFORCED POLYESTER (FRP) DOORS AND ALUMINUM FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary

More information

The fire resistance required for doors in this building is 1 (one) hour resistance in compliance with the below general specifications:

The fire resistance required for doors in this building is 1 (one) hour resistance in compliance with the below general specifications: Query No.1 ; we need more specs. about fire resistant doors Answer to Query No. 1: The fire resistance required for doors in this building is 1 (one) hour resistance in compliance with the below general

More information

B. Related Sections: The following Sections contain requirements that relate to this Section:

B. Related Sections: The following Sections contain requirements that relate to this Section: SECTION 08111 - STEEL DOOR FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

JOB NAME SIMULATED STILE AND RAIL MDF DOORS of 8 REVISED 03/01/11 SECTION STILE AND RAIL MDF DOORS

JOB NAME SIMULATED STILE AND RAIL MDF DOORS of 8 REVISED 03/01/11 SECTION STILE AND RAIL MDF DOORS JOB NAME SIMULATED STILE AND RAIL MDF DOORS 08210-1 of 8 SECTION 081433 STILE AND RAIL MDF DOORS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard and fire rated type wood doors with simulated

More information

SECTION SERIES ALL GLASS ENTRANCES

SECTION SERIES ALL GLASS ENTRANCES 1 SECTION 08 4210 1200 SERIES ALL GLASS ENTRANCES PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Vestibule doors matching entrance doors. 2. Sidelites. B. Related work in other sections: 1.

More information

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017 SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Student Services & Classroom Addition

Student Services & Classroom Addition SECTION 095133 - ACOUSTICAL METAL PAN CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS

SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS PRODUCT SPECIFICATION SERIES 1080/1180 PART 1 - GENERAL 1.01 Work Included SECTION 10170 SOLID PHENOLIC PLASTIC TOILET PARTITIONS A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing

More information

SECTION ORNAMENTAL ALUMINUM RAILING

SECTION ORNAMENTAL ALUMINUM RAILING SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Pipe Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in concrete.

More information

E.M. Crouthamel Elementary School SECTION ROLLER WINDOW SHADES

E.M. Crouthamel Elementary School SECTION ROLLER WINDOW SHADES SECTION 122413 ROLLER WINDOW SHADES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

CONTENTS. B. System Design and Performance Requirements

CONTENTS. B. System Design and Performance Requirements 12245 Laboratory Casework This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or

More information

SECTION ACOUSTICAL PANEL CEILINGS

SECTION ACOUSTICAL PANEL CEILINGS SECTION 095113 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Architectural Roof and Wall Products Guide Specifications

Architectural Roof and Wall Products Guide Specifications Architectural Roof and Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL WALL PANELS This Guide Specification

More information

SECTION ENTRANCE FLOOR GRILLES SPECIFICATIONS

SECTION ENTRANCE FLOOR GRILLES SPECIFICATIONS SECTION 12 48 16 ENTRANCE FLOOR GRILLES SPECIFICATIONS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and

More information

SECTION VISUAL DISPLAY BOARDS

SECTION VISUAL DISPLAY BOARDS SECTION 101000 VISUAL DISPLAY BOARDS THIS SECTION IS WRITTEN IN CSI 3-PART FORMAT AND IN CSI PAGE FORMAT; NOTES TO THE SPECIFIER (IN BLUE), SHOULD BE DELETED PRIOR TO PUBLICATION. PART 1 GENERAL 1.01 SUMMARY

More information

Division 11 - Equipment Section 11401

Division 11 - Equipment Section 11401 PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included

More information

Item # 1: Attached are the revised Table of Contents and Specifications added: Section Cabinets and Vanities

Item # 1: Attached are the revised Table of Contents and Specifications added: Section Cabinets and Vanities ADDENDUM NO. 1 Proposed Residence 422 Hickory Street Buffalo, New York 14204 February 15, 2019 Long Associates, Architects 189 Kenmore Avenue Buffalo, New York 14223 This addendum is issued to amend the

More information

A. Section Cast-In-Place Concrete: Openings in cast-in-place concrete.

A. Section Cast-In-Place Concrete: Openings in cast-in-place concrete. Euro Vista Multi Slide Impact Rated Multi Slide Door PART 1 GENERAL 1.1 SECTION INCLUDES A. Sliding/Folding Doors. 1.2 RELATED SECTIONS A. Section 03300 - Cast-In-Place Concrete: Openings in cast-in-place

More information

DIVISION 6 SOLID SURFACE FABRICATIONS SECTION 06650

DIVISION 6 SOLID SURFACE FABRICATIONS SECTION 06650 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the contract, including general and supplementary conditions and Division 1 Specification Sections, apply to this Section. 1.2

More information

SECTION HEALTHCARE CASEWORK (SYNTHESIS CASEWORK COLLECTION BY MIDMARK)

SECTION HEALTHCARE CASEWORK (SYNTHESIS CASEWORK COLLECTION BY MIDMARK) Midmark is more than just a manufacturer of healthcare products. We are a provider of innovation solutions that work for you. We have an experienced staff that coordinates projects for custom casework

More information

Architectural Specifications, Section Phenolic Lockers

Architectural Specifications, Section Phenolic Lockers Architectural Specifications, Section 10500 Phenolic Lockers Hollman, Inc., 1825 W. Walnut Hill Lane, Irving, TX 75038, (972) 815-4000, www.hollman.com 1.0 GENERAL 1.1 SECTION INCLUDES A. Phenolic Lockers.

More information

SECTION DOOR AND WALL PROTECTION

SECTION DOOR AND WALL PROTECTION PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 10 26 00 DOOR AND WALL PROTECTION A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division-1 specification

More information

SECTION SECURITY PROTECTION PART 1 GENERAL

SECTION SECURITY PROTECTION PART 1 GENERAL SECTION 13 1010 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Bullet Resistant Aluminum Windows. B. Bullet Resistant Transaction Equipment. C. Bullet Resistant Speakers. D. Bullet Resistant Glazing. E. Bullet

More information

FORMICA SOLID SURFACING BY FORMICA GROUP / FABRICATIONS 3-PART TECHNICAL SPECIFICATION SECTION ( )

FORMICA SOLID SURFACING BY FORMICA GROUP / FABRICATIONS 3-PART TECHNICAL SPECIFICATION SECTION ( ) Formica Solid Surfacing by Formica Group 1 PART 1 - GENERAL 1.1 SUMMARY A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING

More information

SPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide

More information