Absco Space Saver Shed Assembly Instructions Model: 23151SK
|
|
- Hubert Melton
- 6 years ago
- Views:
Transcription
1 Assembly Instructons Model: 235SK FRONT BASE LENGTH: 2.26m SIDE BASE LENGTH:.52m FRONT WALL HEIGHT:.8m REAR WALL HEIGHT: 2.08m CONCRETE SLAB 620mm 2360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT WATER RUN OFF IS KEPT CLEAR FROM YOUR SHED We thank you for choosng an Australan made shed. For further assstance please vst our detaled nstructonal vdeo lbrary at At ABSCO Industres we are always lookng to be number ONE, so please let us know what you thnk of our nstructons. Feedback makes us better. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE
2 Model: 235SK GENERAL INSTRUCTIONS Before commencng any assembly, read through these nstructons n detal to gan a thorough understandng of assembly methods and assocated detals. Unpack the carton and carefully dentfy and check off all the parts aganst the parts descrbed and llustrated on pages three and four. SITE PREPARATION The ste for the shed must be level. An uneven surface may result n msalgnment of parts. It s recommended that the shed be set on a 00mm concrete slab and anchored down approprately (refer to last page for detals). Anchor sets are not suppled as standard tems wth ths product as some customers wsh to use ther own anchorng systems. TOOLS REQUIRED OPTIONAL A NOTE ON SAFETY Normal: 4mm & 0mm Masonry: 0mm Some parts may have sharp edges. It s advsable to wear gloves when handlng these tems and safety glasses f drllng holes. Sensble shoes are hghly recommended. Do not erect your shed n wndy condtons, ensure that the shed s securely anchored to a sold foundaton mmedately after constructon s completed. It s hghly recommended to erect the shed wth two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 2
3 Model: 235SK COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART No. CHECK QTY COMPONENT DESCRIPTION PART No. CHECK 2 STEEL SHEET 2045 X 773mm 262 WITH HINGES L = 725mm 58A STEEL SHEET 2045 X 773mm 263 L = 725mm 58B STEEL SHEET 95mm X 773mm 260L 2 L = 773mm 58C STEEL SHEET 95mm X 773mm 260R 2 L = 530mm 6D STEEL SHEET 2045mm X 773mm 26L L = 788mm 79B STEEL SHEET 2045mm X 773mm 26R 2 L = 53mm 8E 3 STEEL SHEET 60mm X 773mm 43S 2 STEEL SHEET 785mm X 73mm 32A STEEL SHEET 725mm X 773mm B ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 3
4 Model: 235SK COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART No. CHECK QTY COMPONENT DESCRIPTION PART No. CHECK 6 JOINER L= 200mm (7.9") CSJ THESE COMPONENTS ARE TO BE JOINED TO THESE COMPONENTS 2 L = 26.5mm 8CL 2 L = 26.5mm 8CR L = 26.5mm 54AL L = 26.5mm 54AR L = 26.5mm 54BL L = 26.5mm 54BR L = 26.5mm 54CL L = 26.5mm 54CR L = 26.5mm 8DL L = 26.5mm 8DR ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 4
5 Model: 235SK COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART No. CHECK QTY COMPONENT DESCRIPTION PART No. CHECK JAMB L= 785mm 89A 2 JAMB L= 20mm 9A JAMB L= 785mm 89B 2 LIP TRIM L= 60mm 88J 220 JAMB L= 788mm 90B CONTENTS OF FITTINGS PACKET SELF TAPPING SCREWS DOOR PADBOLT 22A 6 4mm CSK SCREW & NUT SECURE HINGES TO DOOR DOOR PADBOLT HASP ASSEMBLY INSTRUCTIONS 6 3mm POP RIVETS SECURE HINGES TO DOOR (ALTERNATIVE FIXING METHOD) DOOR STRAP L: 65mm 2A ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 5
6 Model: 235SK INSTRUCTIONS FOR JOINING SPLICED S NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER. = = = = CSJ JOIN>> <<JOIN JOIN>> = = J JOIN>> SJ STEP. Poston the channels and the CSJ joner channel so the center of the CSJ s n lne wth the end of each channel to be joned together. STEP 2. Jon the frst channel to the CSJ by nsertng the center of the CSJ (on an angle) to the end of the channel where the JOIN>> text s marked. Push down one sde of the CSJ untl you hear a 'clck'. = = JOIN>> <<JOIN JOIN>> = <<JOIN = DRILL 4mm (0.6") x 3mm (0.2") (2 PER A SIDE) HOLES TO SECURE SECTIONS TOGETHER. (THESE SCREWS MAY HAVE TO BE TEMPORARILY REMOVED AND REPLACED DURING LATER ASSEMBLY) STEP 3. Jon the second channel to the CSJ by postonng the <<JOIN end of the channel at the center of the CSJ (on an angle). Push the CSJ nto the channel untl you here a 'clck'. FINISHED The joned channels should now look lke the pcture above wth the CSJ postoned equally nsde of the joned channels. PUSH QTY = 0pcs. CSJ PUSH CSJ CSJ CSJ HIGH-SIDE CSJ LOW-SIDE 20mm (0.79") CSJ 5mm (0.59") ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 6
7 Model: 235SK STEP. PRE-ASSEMBLY OF SPLICED S NOTE: JOIN TOGETHER 2 X SECTIONS USING 6 X JOINERS (PART CSJ) 2 X 8CR 2 X 8CL X 54AR X 54AL X 54CR X 54CL NOTE: SOME S HAVE HOLES IN THEM - YOU WILL NEED TO RE-DRILL HOLES ON ANY WHERE THE CSJ JOINING COVERS HOLES ON THE S YOU ARE CONNECTING 2253mm (88.7") 8CL 8CR 54CL 54CR 54AL 54AR 8DR 54BL 54BR = = = = = 2 x 8C x 54A x 54C x 54B x 8D X 54BR X 54BL 8DL X 8DR X 8DL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 7
8 Model: 235SK VIEW OF ROOF COMPONENTS 8C 88J 43S 43S 43S 88J 8C ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 8 NO.
9 Model: 235SK 54B L D 90B 26R 260R 32A 89A 89B 8D 79B 8E 54C VIEW OF WALL COMPONENTS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 22A 260L 32A 6D 9A 54A 8E B PAGE 9
10 Model: 235SK ABSCO ASSEMBLY INTRODUCTION The snaptte assembly system locks most permeter channels to all roof and wall sheets wthout the need for tools and fasteners. To pre-assemble the four wall panels and two roof panels, the permeter channels are secured to the top and bottom of each panel usng the snaptte system, as detaled on the followng pages wherever you see the symbol. HIGH SIDE PUSH HIGH SIDE HIGH SIDE HIGH SIDE PUSH After jonng sheets together, poston channel over one end of the sheets, gently tappng t over the snaptte lugs, workng along the sheets to the other end. Poston sheets on tmbers, trestles or partly over edge of concrete slab. FASTENING SYMBOLS D PUSH HIGH SIDE Jon components together by pre-drllng the holes frst. Use one component as a template to mark where the holes are. Drll wth 3mm drll bt. Jon components together wth one screw at ths locaton only, as some channel sectons have extra holes that are not requred for ths model of garden shed Do not jon components together at ths locaton yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 Each permeter channel must fnsh flush wth the edges of the sheets.the snaptte system allows adjustment for ths process by smply tappng the channel along the sheets untl each end s neatly flush. If you need to remove channels from the panels, pull the channel along the panel from opposng ends. You may need someone to help wth ths. 3mm POP RIVETS 4mm NUT & BOLT SET PAGE 0
11 Model: 235SK DOOR 6. DOOR PANEL ASSEMBLY 58C 58A 58B B 2A 58C ALL VERTICAL DOOR S ARE INSTALLED IN THE REVERSE DIRECTION IN COMPARISON TO HORIZONTAL DOOR S 20mm FLANGE B 5mm FLANGE ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE
12 Model: 235SK REAR PANEL ASSEMBLY B 8D ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 2
13 Model: 235SK SIDE PANEL ASSEMBLY x LEFT SIDE PANEL x RIGHT SIDE PANEL 260R 26R 26L 260L 6D 8E 6D 8E ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 3
14 Model: 235SK ROOF PANEL ASSEMBLY 43S 43S 43S 8C 88J 88J 8C ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 4
15 Model: 235SK FRONT PANEL ASSEMBLY 89A 89B 32A 32A 54A 90B SNAP T TE 79B 54C ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 5
16 Model: 235SK 9A B 9A B NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY ENLARGING THE HINGE HOLE SETS IN THE JAMB USING A 4MM DRILL BIT NOTE: The two holes requred to connect the padbolt hasp for each door have not been pre-punched, to allow for proper algnment. poston each hasp centrally over the padbolt shaft, and drll 3mm holes and secure wth screws ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 6
17 Model: 235SK PANEL CONSTRUCTION NOTE: Take care to ensure that both front and rear wall panels are not postoned upsde down. The top channel of each panel s pre-punched for attachng roof sheet. The base channels are not pre-punched. SIDE WALL PANEL S FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL S ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 7
18 Model: 235SK FINAL CONSTRUCTION ANCHORING OF SHED LOCATION OF 2 CONCRETE ANCHORS - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE - DRILL A 0mm HOLE INTO THE WALL SHEET BOLT & NUT STEEL ANGLE WALL SHEET SLAB - DRILL A 0mm HOLE INTO THE CONCRETE DYNABOLT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 235SK 5/04/6 PAGE 8
19 AUSTRALIA PRODUCT WARRANTY AGAINST DEFECTS Congratulatons on your purchase of an ABSCO SHED ABSCO SHEDS, ncludng garden sheds, garden beds, avares, storage unts, garages, awnngs and carports are made usng hgh qualty Australan made steel. We are pleased to advse we warrant that the steel coatng wll not rust, crack, flake peel or blster for 20 years from date of purchase, when nstalled wthn Australa. Ths warranty does not apply to surface deteroraton of panels caused by Swarf (Tny partcles of steel debrs left from cuttng, grndng or drllng operatons) that has not been removed after buldng constructon, or as a result of contact wth damp sol, chemcals, fertlsers or other corrosve substances. Ths warranty covers any Absco product used for normal domestc use and nstalled n accordance wth the nstallaton nstructons. The warranty does NOT cover Damage caused by storms, wnd, ran snow or poor foundatons. Ths warranty does NOT cover ABSCO products nstalled n severe coastal, ndustral or other hghly corrosve envronments. The warranty does not cover fasteners (screws, nuts, bolts, rvets, hasps or bolts). The warranty s lmted to replacement and delvery of components and does not nclude any labour or nstallaton costs. The benefts gven by the warranty are n addton to your other rghts and remedes under a law n relaton to the goods or servces to whch the warranty relates. The warranty apples to the excluson of all other representatons, guarantees or warrantes express or mpled, our goods come wth guarantees that cannot be excluded under the Australan consumer law and s not transferable. You are enttled to a replacement or refund for a major falure and for compensaton for any other foreseeable loss or damage. You are also enttled to have the goods repared or replaced f the goods fal to be of an acceptable qualty and the falure does not amount to a major falure. For further nformaton go to Please retan a proof of purchase (sales docket or nvoce) or regster your warranty wthn 30 days of purchase here: In the unlkely event a warranty clam s made, t must be supported by photographc evdence and detals of the defect, ncludng component part numbers, together wth proof of purchase documentaton (or on-lne regstraton of purchase) and forwarded to the address below. Upon recept of the warranty clam, the Customer Servce Manager wll contact you wthn three busness days to advse you of the assessment outcome of the clam, whch may nclude your expenses ncurred n makng the clam. THE CUSTOMER SERVICE MANAGER, ABSCO INDUSTRIES, PO BOX 9 ACACIA RIDGE QLD AUSTRALIA 40 PHONE: FAX: warranty@absco.com.au Issued 0 January 202 P a g e
20 ABSCO SHEDS - STORAGE GUIDELINES ABSCO SHEDS nclude garden sheds, garden beds, storage unts, avares, garages, awnngs and carports. ABSCO SHEDS are desgned to be weatherproof for normal weather condtons. In the event of extreme weather condtons such as heavy ran, combned wth hgh wnd gusts, the rdge cappng, sheetng jons, screw fxngs etc., may exhbt mnor deformatons whch may allow some water entry. These areas should be checked regularly to ensure that maxmum strength and protecton s mantaned. Other weather condtons such as extreme heat and extreme cold, most or dry ar can nfluence the effects of concrete floor mosture and/or condensaton on the undersde of the roof sheets. ABSCO SHEDS and storage unts are prmarly used for storage of garden equpment such as lawnmowers, wheelbarrows, garden tools etc. Storage tems that mght be adversely affected by any of the above condtons may requre addtonal protecton such as beng sealed or covered by plastc sheets and/or stacked above the concrete floor on tmber slats. Waterproof sealants may be used to offer further protecton where requred around jons and screw fxngs, as can rubber door seals and other products whch are avalable from most hardware outlets. Placement of waterproof sealants (slcone) between the base of the shed and concrete slab s not recommended, as ths process can have a reverse effect, preventng excess water from escapng, resultng wth water accumulatng and beng trapped nsde the shed. Absco accepts no responsblty for water entry, floor mosture, condensaton or the condton of the Contents nsde your Absco steel buldng arsng from any of the pre-mentoned weather condtons. 2 P a g e
Absco Space Saver Shed Assembly Instructions Model: 15081SK
Assembly Instructons Model: 508SK FRONT BASE LENGTH:.52m SIDE BASE LENGTH: 0.78m FRONT WALL HEIGHT:.8m REAR WALL HEIGHT:.95m CONCRETE SLAB 620mm 880mm WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A
More informationGardenpro Masterstore Series Shed Model: J30152MK
Shed Model: J305MK FRONT BASE LENGTH: 3.0m SIDE BASE LENGTH:.5m FRONT WALL HEIGHT:.80m REAR WALL HEIGHT:.08m 60mm SLAB WIDTH CONCRETE SLAB 300mm SLAB LENGTH We thank you for choosng an Australan Made Shed.
More informationAbsco Space Saver Shed Assembly Instructions Model: 15151S
Assembly Instructions Model: 55S FRONT BASE LENGTH:.52m SIDE BASE LENGTH:.52m FRONT WALL HEIGHT:.8m REAR WALL HEIGHT: 2.08m CONCRETE SLAB 620mm 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES
More informationAbsco Economy Shed Model: 15231F
Model: 523F FRONT:.52m SIDE: 2.26m HEIGHT:.80m CONCRETE SLAB 2360mm 620mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm. 50mm 0mm 50mm THIS WILL ENSURE THAT WATER RUN OFF IS KEPT
More informationAbsco Premier Garden Shed Assembly Instructions Model: 30232G
Absco Premier Garden Shed Assembly Instructions FRONT: 3.00m SIDE:.6m HEIGHT:.00m 360mm CONCRETE SLAB 3100mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 10mm. 50mm 10mm 50mm THIS
More informationAbsco Premier Garden Shed Assembly Instructions Model: 30232G
Absco Premier Garden Shed Assembly Instructions FRONT: 3.00m SIDE:.6m HEIGHT:.00m 360mm CONCRETE SLAB 3100mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 5mm DEEP AROUND THE
More informationAbsco Premier Garden Shed Assembly Instructions Model: 30302G
Absco Premier Garden Shed Assembly Instructions Model: 3030G FRONT: 3.0m SIDE: 3.0m HEIGHT:.1m 3100mm CONCRETE SLAB 3100mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 10mm. 50mm
More informationMODEL NO: GSS1508G. Model No:...GSS1508G Overall Size (W x D X H*): x 800 x 1900mm Roof Type:...Skillion *Minimum Wall Height.
INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 1.5 x 0.8 x 1.9m MODEL NO: GSS1508G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationEasySHED 5StepAssembly
Gable Roof Model OPTONL OULE OORS EasySHE 5Stepssembly R popular style with a large storage area for work and play Model 3.00m x 3.00m x 2.10m COMPONENT CHECK LST - EasySHE 4x Plain Sheets (Step 1) 780
More informationPATENTS ARE PENDING. Building Dimensions. Exterior Dimensions Roof Edge to Roof Edge
Assembly Manual 8x5 PATENTS ARE PENDING Approximate Size 7980303 Storage Area Building Dimensions Exterior Dimensions Roof Edge to Roof Edge Interior Dimensions Wall to Wall Sq. Ft. Cu. Ft. Width Depth
More information6x5. Assembly Manual CAUTION. Sharp Edges PATENTS ARE PENDING. Building Dimensions. Approximate Size. Storage Area. Interior Dimensions
Assembly Manual 6x5 PATENTS ARE PENDING Building Dimensions Approximate Size Storage Area Exterior Dimensions Interior Dimensions Roof Edge to Roof Edge Wall to Wall Sq. Ft. Cu. Ft. Width Depth Height
More informationPATENTS ARE PENDING. Building Dimensions. Exterior Dimensions Roof Edge to Roof Edge
Assembly Manual 8x9 PATENTS ARE PENDING Approximate Size 7640303 Storage Area Building Dimensions Exterior Dimensions Roof Edge to Roof Edge Interior Dimensions Wall to Wall Sq. Ft. Cu. Ft. Width Depth
More informationFREE RANGE TM HEN HOTEL TM Chicken Coop
FREE RANGE TM HEN HOTEL TM Chicken Coop Assembly Instructions This shelter is ideal for dogs, cats, chickens, rabbits, guinea pigs. Congratulations on purchasing your new FREE RANGE TM Hen Hotel TM Coop.
More informationGARDEN SHEDS 63, 65, 66, 67, 69, 83, 85, 87, 89, 103, 105, 107, 109 & 1010 TRECO SHEDS ARE MANUFACTURED TO COMPLY WITH ALL AUSTRALIAN STANDARDS
SINGLE AND DOULE HINGED DOOR 6 8 10 GARDEN SHEDS 63, 65, 66, 67, 69, 83, 85, 87, 89, 103, 105, 107, 109 & 1010 TRECO SHEDS ARE MANUFACTURED TO COMPLY WITH ALL AUSTRALIAN STANDARDS Please visit the manuals
More informationINSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 1.5 x 0.8 x1.5m
INSTRUCTIONS FOR: GALVANIZED STEEL SHED GREEN 1.5 x 0.8 x1.5m MODEL NO: GSS150815G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationMODEL NO: GSS150819SDG
INSTRUCTIONS FOR: GALVANIZED STEEL SHED 1.5 x 0.8 x 1.9m WITH SIDE DOOR. MODEL NO: GSS150819SDG Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according
More informationWall 3000 with a single sliding door
Garden Shed Assembly Instructions Wall 3000 with a single sliding door This module will enable you to construct a 3000mm x 1900mm wall with a single sliding door that will be used in your new garden shed.
More informationWall 3000 with a double sliding doors
Wall 3000 with a double sliding doors This module will enable you to construct a 3000mm x 1900mm wall with a double sliding door that will be used in your new garden shed. Before you begin the build Just
More informationNiagara / DLG-85 Shower Cabin Installation and User s guide
Niagara / DLG-85 Shower Cabin Installation and User s guide I. Mounting Preparation 1. After opening the case, read this introduction carefully, check all the packed parts, examine the shower cabinet for
More informationGARDEN SHEDS 63, 65, 67, 69, 83, 85, 87, 89, 103, 105, 107 & 109 TRECO SHEDS ARE MANUFACTURED TO COMPLY WITH ALL AUSTRALIAN STANDARDS
6 8 10 GARDEN SEDS 63, 65, 67, 69, 83, 85, 87, 89, 103, 105, 107 & 109 TRECO SEDS ARE MANUFACTURED TO COMPLY WIT ALL AUSTRALIAN STANDARDS Please visit the manuals section at our website for any updates
More informationA (mm) B (mm) A (mm) B (mm) 10 x x x x ft extension. 8ft extension ft extension 3100
NOMINAL SIZE A (mm) B (mm) NOMINAL SIZE A (mm) B (mm) x 6 2012 6ft extension 1860 x 8 2632 3208 x 3252 x 12 3872 8ft extension 2480 ft extension 30 12ft extension 3720 - Thank you for purchasing your new
More informationAqua Swing Tub Door & EX/RT Panel
Aqua Swing Tub Door & EX/RT Panel TUB DOOR AND PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest
More informationHORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS ASSEMBLY MANUAL
HORSE SHELTERS 6, 12, 15, 18, & 24 SHELTERS ASSEMBLY MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property
More informationAbsco Garden Shed Products Snow Support Frame Model: SNOW3018
Absco Garden Shed Products Snow Support Frame SNOW SUPPORT FRAME FOR ABSCO SHEDS ONLY (NOT SUITABLE FOR HIGHLANDER MODELS) NOTE: PLEASE REFER TO THE ATTACHED CERTIFICATE AND DRAWING FOR THE CORRECT QUANTITIES
More informationTo manage leave, meeting institutional requirements and treating individual staff members fairly and consistently.
Corporate Polces & Procedures People and Development - Document CPP216 Leave Management Frst Produced: Current Verson: Past Revsons: Revew Cycle: Apples From: 09/09/09 07/02/17 09/09/09, 26/10/12 3 years
More informationSQUARE SUN TUNNEL INSTALLATION INSTRUCTION
SQUARE SUN TUNNEL INSTALLATION INSTRUCTION Please leave these installation instructions with the owner of the Sun Tunnel. This will enable them to carry out the straightforward maintenance mentioned below.
More informationThe Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage
The Ashland Project Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage The garage and bedroom extend from the front of this three bedroom home, drawing you visually into the entryway. Brick and stucco
More informationA (mm) B (mm) A (mm) B (mm) 6 x 6. 6 x x x ft extension. 8ft extension ft extension 3100
NOMINAL SIZE A (mm) B (mm) NOMINAL SIZE A (mm) B (mm) x 2012 ft extension 180 x 8 232 194 x 10 3252 x 12 3872 8ft extension 2480 10ft extension 3100 12ft extension 3720 - Thank you for purchasing your
More informationSecure Storage On Demand
Western Steel & Tube Ltd. Secure Storage On Demand Modular Containers Multiple uses for agricultural, commercial, and residential applications. Secure Storage On Demand Western Steel & Tube Ltd. Ph: 204.475.4966
More informationLymTal International, Inc.
Iso-Flex Deck-Lock Installation Instructions Figure 1 (Parts Drawing) SPLIT SLAB/PLAZA DECK JOINT COVER SYSTEM Installation Instructions The following installation instructions are very important. Read
More information30mm Height Linear Drain Shower Trays
Installation Instructions 30mm Height Linear Drain Shower Trays 9. Parts Supplied Description Qty Shower Tray Parts Supplied (Fitting Kit) Description Qty Description Qty Shower Drain Base Fix-KST Adhesive
More informationA (mm) B (mm) A (mm) B (mm) 5lt X lt x lt x 8. 5lt x ft extension. 8ft extension ft extension 3100
NOMINAL SIZE A (mm) B (mm) NOMINAL SIZE A (mm) B (mm) 5lt X 6 1990 6ft extension 1860 5lt x 8 2610 1620 5lt x 10 3230 5lt x 12 3850 8ft extension 2480 10ft extension 3100 12ft extension 3720 - Thank you
More informationInstallation Manual. For the competent person. Installation Manual. Flue pipe for ecotec plus. Concentric Ø 110/160 GB, IE
Installaton Manual For the competent person Installaton Manual Flue ppe for ecotec plus Concentrc Ø 0/60 GB, IE Table of contents Table of contents Notes on the documentaton...3. Observng other applcable
More informationTask: Review the section Materials and jointing techniques up to the heading Compression joints and answer the following questions.
CHAPER 1 ABRICAE AND INSALL NON-ERROUS PRESSURE PIPING 37 WORKSHEE 1 Student name: Enrolment year: Class code: Competency name/number: o be completed by teachers Satsfactory Not satsfactory WORKSHEES ask:
More informationROOF MOUNT KIT OWNERS MANUAL
ROOF MOUNT KIT OWNERS MANUAL Made in the USA by: Southwest Windpower, Inc. 1801 W. Route 66 Flagstaff, Arizona 86001 Phone: (928) 779-9463 Fax: (928) 779-1485 E-mail: info@windenergy.com Web: www.windenergy.com
More informationSECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
More informationSpecial Applications. Dorn Equipment, Corporation 27 Upham Street Melrose, MA Phone: Fax:
Special Applications Outdoor Protection When using the FIRSTO units outdoors, or wherever vapor or moisture barrier is needed, an application of FIWA sealant is used. The sealant should be applied to any
More informationALPINE PATIO COVER INSTALLATION INSTRUCTIONS
ALPINE PATIO COVER INSTALLATION INSTRUCTIONS Contact us at: 1-800-851-0865 or www.americana.com Before You Begin: Consult your local building department for any required permits You may be required to
More informationOZARK PATIO COVER INSTALLATION INSTRUCTIONS
OZARK PATIO COVER INSTALLATION INSTRUCTIONS Contact us at: 1-800-851-0865 or www.americana.com Before You Begin: Consult your local building department for any required permits You may be required to obtain
More informationROOF MOUNT KIT OWNERS MANUAL
ROOF MOUNT KIT OWNERS MANUAL Made in the USA by: Primus Wind Power, Inc. 938 Quail St. Lakewood, CO 80215 Phone: (303) 242-5820 www.primuswindpower.com AIR is a trademark of Primus Wind Power, Inc. ROOF
More informationNOMINAL SIZE. (mm) 4ft extension ft extension ft extension ft extension ft extension 3720
NOMINAL SIZE 4ft extension 1240 6ft extension 1860 8ft extension 2480 10ft extension 3100 12ft extension 3720 Thank you for purchasing your new Robinsons greenhouse. We recommend you familiarise yourself
More informationLogistics Management. Where We Are Now CHAPTER ELEVEN. Measurement. Organizational. Sustainability. Management. Globalization. Culture/Ethics Change
CHAPTER ELEVEN Logstcs Management McGraw-Hll/Irwn Copyrght 2011 by the McGraw-Hll Companes, Inc. All rghts reserved. Where We Are Now Relatonshps Sustanablty Globalzaton Organzatonal Culture/Ethcs Change
More informationQUAD Rectangular Hinged Door Shower Enclosure Installation Instructions
QUAD Rectangular Hinged Door Shower Enclosure Installation Instructions IMPORTANT Please read carefully the following instructions before installing your shower enclosure. If you have any questions on
More informationManufacturer of Coolers, Freezers, Step-Ins, Refrigeration Trailers and Sliding Doors COOLER AND FREEZER INSTALLATION MANUAL
Manufacturer of Coolers, Freezers, Step-Ins, Refrigeration Trailers and Sliding Doors COOLER AND FREEZER INSTALLATION MANUAL http://www.walkincoolersandfreezers.com 786-286-2926 1 BEFORE INSTALLATION Please
More informationNOMINAL SIZE. (mm) 6ft extension ft extension ft extension ft extension 3720
NOMINAL SIZE (mm) 6ft extension 1860 8ft extension 2480 10ft extension 3100 12ft extension 3720 Thank you for purchasing your new Robinsons greenhouse. We recommend you familiarise yourself with the instructions
More informationCity of Margate, Florida Building Department MINIMUM PERMIT REQUIREMENTS FOR FENCES
MNMUM PERMT REQUREMENTS FOR FENCES PERMT APPLCATON COMPLETELY FLLED OUT SGNED AND NOTARZED HOMEOWNER S AFFDAVT (when obtaining a Owner/Builder Permit) EASEMENT AGREEMENTS, APPROVED BY THE FVE UTLTY COMPANES
More informationWabo Allure, AFJ Interior Floor Seismic Expansion Control System
Installation Procedure Last Updated: February 28 th, 2018 Wabo Allure, AFJ 100-400 Interior Floor Seismic Expansion Control System The following installation procedure is very important and must be fully
More informationAPPLICATION AND LISTING
DURALINER (SDL) 6"-8" DIAMETER (ROUND & OVAL) INSTALLATION INSTRUCTIONS MH14420 CMH1329 THESE INSTALLATION AND OPERATION INSTRUCTIONS COVER DURALINER MASONRY RELINING SYSTEM A MAJOR CAUSE OF CHIMNEY RELATED
More informationCornerview Shower Enclosure & Base
Cornerview Shower Enclosure & Base SHOWER ENCLOSURE AND BASE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For
More informationINSTALLING A POUR-IN-PLACE DOCK LEVELER (EH & RR)
INSTALLING A POUR-IN-PLACE DOCK LEVELER (EH & RR) Part A: Prepare the Site & Make the Floor 1.) Prepare (concrete) dock wall and pit floor as shown in the diagrams. Pit floor should taper from back to
More informationSe incluyen las instrucciones en español
Page 1 of 16 Pittsburgh Corning Corporation Pittsburgh, PA 15239 1-800-624-2120 www.pittsburghcorning.com All trademarks and registered trademarks in this brochure are owned and protected by Pittsburgh
More informationINDIVIDUAL SOLUTIONS FROM A SINGLE SOURCE
Extract of the general catalogue, CHAPTER F INDIVIDUAL SOLUTIONS FROM A SINGLE SOURCE Systems dversty for warehouses, factores and workshops GENERAL CATALOGUE Modular shelvng mezzannes and platforms optmal
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV
More informationALPINE PATIO COVER INSTALLATION INSTRUCTIONS
ALPINE PATIO COVER INSTALLATION INSTRUCTIONS Contact us at: 1-800-851-0865 or www.americana.com Before You Begin: Consult your local building department for any required permits You may be required to
More informationBox Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
More informationOperator s Manual for Morse Mobile-Karrier for 55-Gallon Plastic or Steel Drum
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More informationInstallation guidelines System: Cofraplus 220
Edition: February 2012 Installation guidelines System: Cofraplus 220 ArcelorMittal Construction International Industriestrasse 19 8112 Otelfingen / Zürich Switzerland www.arcelormittal.com/arval Summary
More informationHandi-Mate TM Shed HINGED - TYPE HM4
INSTALLATION GUIDE Handi-Mate TM Shed HINGED - TYPE HM4 HOLD DOWN LUGS MUST BE INSTALLED ACCORDING TO WIND CLASSIFICATION SHMSHSDHM4## WIND CLASSIFICATION N, N = x HOLD DOWN LUG (HMHL) N3 = 6x HOLD DOWN
More informationWEC Manufacturing Phone: (901) Website: Itswec.com
All Welded Plus Series Part 1: General 1.1 Construction Requirements: All lockers shall be powder coated steel as design and manufactured by WEC, Memphis, Tennessee. WEC will furnish all labor and materials
More informationHow to book Sixt in the travel agency login
How to book Sxt n the travel agency logn What s the Sxt agency logn? A quck and easy onlne bookng portal customzed for travel agences Where you can book all relevant Sxt products (no matter f prepad or
More informationRaised Basement. Mechanical Installation Guide
R Raised Basement Mechanical Installation Guide Ensure masonry work is correct. If recessed, the depth must be 14 inches deep unless otherwise specified for a custom application. Width and length may vary
More informationPre-Fabricated Roof Curbs
Knock Down Curb Assembly Instructions These roof curb assembly instructions are to be used as general guidelines only. Included with shipment are as-built drawings for proper location of sections and channels.
More informationPrime Shower Enclosure & Base Kit
Prime Shower Enclosure & Base Kit SHOWER ENCLOSURE AND SHOWER BASE KIT INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior
More informationDLB-23 Shower Enclosure Installation and User s guide
DLB-23 Shower Enclosure Installation and User s guide I. Mounting Preparation 1. After opening the case, read this introduction carefully, check all the packed parts, examine the shower cabinet for shipping
More information130mm CROATIA BOARD 180mm V-GROOVE
Enjoy DecoClad s enduring beauty in the bush, by the beach or in full sun. Effortless to install and maintain, DecoClad is the ultimate in exterior cladding. Pairing aluminium s proven strength and durability
More informationPrime Shower Enclosure & Base
Prime Shower Enclosure & Base SHOWER ENCLOSURE & BASE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest
More informationTRADE AND COMPETITIVENESS IN NORTH AMERICA
TRADE AND COMPETITIVENESS IN NORTH AMERICA A FOCUS ON THE CALI BAJA MEGA-REGION PRODUCED BY RESEARCH SUPPORTED BY El Colego de la Frontera Nort e NORTH AMERICAN TRADE IN THE AGE OF NAFTA The North Amercan
More informationBi-Folding Door Installation Guide
Bi-Folding Door Installation Guide Sub Cill Installation: Drainage paths through the sub cill and drainage tray must be left unobstructed by the sub structure and sealing. When applying the frame to the
More informationDuramax Storage Shed Limited Fifteen Year Warranty
Duramax Storage Shed Limited Fifteen Year Warranty U.S. Polymer Inc. will send a replacement part free of charge, in the event of material defects and or workmanship for a period of fifteen years from
More informationConergy SolarFamulus II
Conergy SolarFamulus II Installation manual www.conergy.com Table of Contents Table of Contents SolarFamulus II for universal use on flat roofs 1 Introduction 1 1.1 Short description 1 1.2 Intended use
More informationEdge-of-Dock Leveler 'BA' - 'BX' Series. Owner s Manual and Installation Instructions
Edge-of-Dock Leveler 'BA' - 'BX' Series Owner s Manual and Installation Instructions A Message to Aaron-Bradley Edge-of-Dock Owners and Operators Edge-of-Docks are specialized equipment with unique operating
More information1 PVC or ABS drain with strainer
Patents Pending ProBase II Single-Slope Shower Base and Kit CONTENTS 1. General Information...1 2. Materials...1 3. Planning...2 4. Preparation...3 5. Layout...3 6. Install Base and Shims...4 7. Install
More informationMETALWorkS. RH200 Custom Hook-on Panels. General Installation Instructions. Ceiling 1.0 GENERAL Site Conditions Product Description
Ceiling Systems Between us, ideas become reality METALWorkS General Installation Instructions RH200 Custom Hook-on Panels 1.0 GENERAL 1.1. Product Description RH200 system is a downward accessible, metal
More informationSuburban Infiniti Fa~ade Renovations JC
C V C)F AJ"1?\ ~~fy NOV ctyofnovlorg Suburban nfnt Fa~ade Renovatons JC13.. 99 Suburban nfnt Facade Renovatons, JC13-99 Consderaton of the request of nfnt of Nov. Suburban Collecton for Prelmnary Ste Plan
More informationHOME SYSTEMS CONSTRUCTION PROCEDURE
HOME SYSTEMS WWW.QUICKBUILTHOMES.COM.AU CONSTRUCTION PROCEDURE INDEX - PARTS LIST PARTS LIST QBRC75(C) QBRM75C) QBSIPS75 QBRFSZ75C QBRFBC75C QBRF3030G QBRGSQC QBRFRC75C QBRFZEC QBRF4040C QBSACC75 QBFR7330WC
More informationRenewable Energy Technologies for Federal Facilities
Renewable Energy Technologes for Federal Facltes Ths report was prepared as an account of work sponsored by an agency of the Unted States Government. Nether the Unted States Government nor any agency thereof,
More informationAS The External Waterproofing Membranes Standard
AS 4654-2 The External Waterproofing Membranes Standard NOTE This external waterproofing standard contains solutions for problems which have not been addressed in other countries. CONFORMANCE CONDITIONS
More informationFreeStyle Linear Drain with Full Mortar Bed Adapter Kit
FreeStyle Linear Drain with Full Mortar Bed Adapter Kit U.S. Patent No. 8,474,068 Patents Pending: Canada & EP Publication No. 2354339 Discard Linear Drain installation instructions and refer to these
More informationAceGrip - RP GL1005. Lining/colour coating: Typical Applications: EN388
GLOVE RANGE AceGrp - RP Crnkle latex coatng n a range of colours Gves excellent grp and durablty Seamless 10 gauge kntted polycotton lner Soft and comfortable for the wearer over prolonged perods of use
More informationOWNER S MANUAL SERIES MDS-96-BK, SM, DR
VESTIL MANUFACTURING CORP. 2999 N. Wayne St., Angola, IN 46703 Ph: 260-665-7586 Fax: 260-665-1339 E-mail: sales@vestil.com Website: www.vestil.com SERIES MDS-96-BK, SM, DR OWNER S MANUAL Introduction...
More informationMounting systems for solar technology
Mounting systems for solar technology ASSEMBLY INSTRUCTIONS CROSSRAIL TILT KIT 7 / 0 / 5 TILT FOR LOW-SLOPE AND STEEP-SLOPE ROOFS TABLE OF CONTENTS TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS
More informationDevelopment and production of an Aggregated SPPI. Final Technical Implementation Report
Development and producton of an Aggregated SPP Fnal Techncal mplementaton Report Marcus Frdén, Ulf Johansson, Thomas Olsson Servces Producer Prce ndces, Prce Statstcs Unt, Statstcs Sweden 2010 ntroducton
More informationPittsburgh Corning ProVantage Glass Block Installation System Assembly Instructions
Pittsburgh Corning ProVantage Glass Block Installation System Assembly Instructions Introduction: The ProVantage Glass Block Installation System is the easiest way to install Pittsburgh Corning Premiere
More information1. Bullet resistant hollow metal door and frame assemblies tested in accordance with UL 7 52 and in compliance with the following:
Various Locations PROJECT#: R1401-01 SECTION 083400 -BULLET RESISTANT DOOR AND FRAMES PART 1-GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary
More informationOWNER S MANUAL SERIES MDS-96-BK, SM, DR
SERIES MDS-96-BK, SM, DR OWNER S MANUAL Introduction... 1 Bill of Materials... 2 Assembly Instructions. 3 Warranty....12 IMPORTANT NOTES, WARNINGS AND SAFETY INSTRUCTIONS Ensure that all employees understand
More informationCANTILEVER RACK SPECIFICATIONS PART 1 GENERAL 1.1 SCOPE 1.2 APPROVED MANUFACTURER 1.3 REGULATORY ORGANIZATIONS AND GROUPS 1.4 QUALITY ASSURANCE
CANTILEVER RACK SPECIFICATIONS PART 1 GENERAL 1.1 SCOPE This specification is intended to describe the general requirements applicable to a proper structural cantilever rack design. In addition, it is
More informationNetShelter. Four-Post Rack. Installation and Quick-Start Manual
NetShelter Four-Post Rack Installation and Quick-Start Manual Contents Product Overview....................................... 1 Product Inventory....................................... 2 Features of the
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationPreparation INSTALLATION INFORMATION
Preparaton 1 Pergo lamnate floorng materals are delvered wth nstructons n the form of llustratons. The texts below provde explanatons for the llustratons, and are dvded n three areas: Preparaton, Installaton
More informationTABLE OF CONTENTS. 1.0 INTRODUCTION 1.1 Greenstone Structural Engineered Panels 1.2 Drawing and Element Numbers
version 2.5 updated as of 08.04.2017 2 TABLE OF CONTENTS 1.0 INTRODUCTION 1.1 Greenstone Structural Engineered Panels 1.2 Drawing and Element Numbers 2.0 ASSEMBLY 2.1 Sequence of Assembly 2.2 Preparation
More informationUnderground Exhaust System
Operation and Maintenance Manual Underground Exhaust MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Oct. - 2015 Underground Duct Construction Standards 1. Dig trench depth to allow for minimum distance from
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED TEN66 SUB-FRAME SYSTEM
SYSTEM TEN66 INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630) 355-4995 www.omnis-panels.com
More informationWD5 (Timber Cavity) Installation Guide Operating Instructions Warranty
WD5 (Timber Cavity) Installation Guide Operating Instructions Warranty WD5 (Timber Cavity) Installation Guide, Operating Instructions & Warranty IMPORTANT! This wood appliance must be installed to AS/NZS
More informationHomeowners complain about having too much storage space about as often as they do about having an overabundance of cash. It just doesn't happen.
Homeowners complain about having too much storage space about as often as they do about having an overabundance of cash. It just doesn't happen. Nearly every home, regardless of its size, has a shortage
More informationFINAL PROJECT REPORT JUNE, 1992 SUMMARY
FNAL PROJECT REPORT JUNE, 992 PROJECT NUMBER TTLE 9-XT-W7962- A NEW U.S. MANUFACTURNG CAPABLTY OF GLASS PREFORMS FOR FBER OPTCS N DEFENSE PROGRAMS SUBCONTRACTOR POLYMCRO TECHNOLOGES, NC. PHOENX, ARZONA
More informationNOMINAL SIZE. (mm) 6ft extension ft extension ft extension ft extension 3720
NOMINAL SIZE (mm) 6ft extension 1860 8ft extension 2480 10ft extension 3100 12ft extension 3720 Thank you for purchasing your new Robinsons greenhouse. We recommend you familiarise yourself with the instructions
More informationHOLLOW METAL DOORS AND FRAMES SECTION HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL
13686.00 HOLLOW METAL DOORS AND FRAMES 081113-1 SECTION 081113 - HOLLOW METAL DOORS AND FRAMES 1.1 RELATED DOCUMENTS: PART 1 - GENERAL A. Drawings and general provisions of Contract, including General
More informationStandard Sizes: 2.125m underside of gutters m total height m roof m roof m roof.
H Standard Sizes: H 2.125m underside of gutters. 2.280m total height. L L 5.450m roof. 6.050m roof. 7.250m roof. W W 3.000m roof/2.640m between posts. 3.600m roof/3.240m between posts. 5.400m roof/5.040m
More informationPreference Slimline 5537 Utility Console I NSTALLATION GUIDE
Preference Slimline 5537 Utility Console I NSTALLATION GUIDE WARNING Failure to install the 5537 as described in this installation guide may cause the unit to collapse, resulting in serious injury to personnel.
More informationSECTION NON-STRUCTURAL METAL FRAMING
SECTION 09 22 16 PART 1 - GENERAL 1.1 DESCRIPTION A. This section specifies steel studs wall systems, shaft wall systems, ceiling or soffit suspended or furred framing, wall furring, fasteners, and accessories
More information