Introduction to Chemical Plant Design Life Cycle
|
|
|
- Jared Sutton
- 6 years ago
- Views:
Transcription
1 Introduction to Chemical Plant Design Life Cycle Process Safety Consideration
2 Chemical Plant Design A project/endeavour/task to determine the structure of a process to produce a product in the way that is economical, safe, and environmentally friendly.
3 A design project PROCESS? Raw materials? Survey/feasibility studies Project structure/planning (milestone) Design Process Structure Safety, Health & Environment Desired Products
4 Middle Distillates MTBE PSE Methanol Urea Methane Formadehyde Ammonia Urea Ammonia Ammonium Nitrate Ammonium Phosphate Polyvinyl Chloride End Uses of Fractionated Raw Natural Gas Ethane Chloralkali Plant Ethylene Oxide Titanium Dioxide Silicones Polyethylene LDPE Glycol Surfactant Polypropylene Propane Ammonia Acrylics Acrylonitrile Caprolactam Terephthalic Acid Polystyrene Benzene Unsaturated Esters Butane ABS, SAN MTBE
5 Naphtha Utilisation For Petrochemicals (1/2) Cl2 EDC/VCM Polyvinyl Chloride LDPE Acetic Acid Vinyl Acetate Polyvinyl Acetate LLDPE/HDPE Ethylene O2 H2 PTA Polyester Polyethylene O Ethylene Oxide Ethylene Glycol Chips Terephthalate Benzene (PET) Ethylbenzene Styrene Polystyrene Naphtha H2O O2 Cracker Ethyl Alcohol Ethyl Aldehyde Acetic Acid Polypropylene H2O O2 HCN Propylene Isopropanol Acetone Methyl Methacrylate Polymethylmethacrylate Benzene Isopropylbenz O2 Cumene Hydroperoxide Cleavage Phenol / (Cumene) (CHP) Acetone
6 Naphtha Utilisation For Petrochemicals (2/2) PSE O2 (By Products) n - Butane Acetic Acid Acrylonitrile Butene - 1 Mixed C 4 Butadiene Polybutadiene (Synthetic Butadiene Rubber) Adiponitrile H2 HMDA Nylon 6,6 Caprolactam Nylon 6 Butene - 2 Isobutene Polybutene Naphtha Cracker Toluene Toluene Diisocyanate (TDI) Nylon-6 MTBE (ABS) C2 Benzene Ethylbenzene Styrene Polystyrene Pyrolysis C3 O2 Gasoline Mix-xylene Phenol Cyclohexanone Caprolactam Fuel Oil Acetic Acid EG Para - xylene Pure Terephthalic Acid (PTA) Polyester Fiber Fuel Gas
7 Plant Design Phases 1. Research 2. Process Development 3. Preliminary Engineering 4. Basic Engineering 5. Detailed Engineering 6. Fabrication, Construction & Installation 7. Start-up 8. Operation
8 Process Development Target Main tasks and decisions Main safety issues Development of process concept and scale-up to industrial scale. - Idea generation and process creation/innovation. - Laboratory and simulation studies on reaction mechanism and kinetics. - Examination of raw materials (pure and industrial grade). - Laboratory & reaction calorimeter tests. - Process alternatives generation - Bench and pilot scale tests. - Market survey. - Legal and patent check. - Use of hazardous material as feedstock. - Fail to choose the safer state of feedstock. - Incorrect data on the reaction kinetic and reaction behavior. - Incorrect data on runaway reaction potential. - Overlook the chemical reactivity and incompatibility. - Underestimate the effect of impurity, by-product and contaminants. - Unclear mechanism to control the unwanted/runaway reaction. - Inaccurate scale-up.
9 Preliminary Engineering Target Main tasks and decisions Main safety issues Preliminary process design for the feasibility study. - Process concept selection and flow sheet development. - Selection of unit operations. - Preliminary sizing of equipment. - Preliminary selection of construction material. - Site selection. - Final feed/product specifications. - Feasibility study. - Complicated and extreme routes selection (high temperature and pressure). - Unsuitable types of unit operations. - Unsafe operating conditions. - Overlook the chemical reactivity and incompatibility at process equipment level. - Lack of safety analysis on the chemical contaminations.
10 Basic Engineering Target Main tasks and decisions Main safety issues Creation of the process data for detailed engineering. - Detailed process design and optimization. - Process design of equipment and piping system. - Basic automation and instrumentation engineering. - Preliminary layout design. - Utilities design. - Waste minimization. - Hazard and operability study. - Inappropriate layout, positioning and physical arrangement. - Incompatible heat transfer medium. - Incorrect heating/cooling sizing. - Inadequate safety and process protection. - Wrong or inaccurate process data for equipment - Unsuitable material of construction. - Failing to consider corrosive environment. - Inappropriate mechanical/ physical and chemical resistance specification. - Incorrect material flow set-up. - Lack of safety analysis.
11 Detailed Engineering Target Main tasks and decisions Main safety issues Design of the physical process (equipment, piping etc.) for acquisitions and construction. - Detailed piping design. - Detailed layout design. - Instrumentation and automation design. - Mechanical design of the equipment. - Structural and civil engineering. - Electrical design. - Design of utilities/services. - Inappropriate piping layout and protection. - Inappropriate internal shape of equipment/component. - Incorrect location and positioning of support/ attachment/ venting of process equipment. - Inadequate electrical, mechanical and structural/ foundation specification. - Inadequate static, lightning and ignition sources control. - Inadequate detection, automation and instrumentation. - Inadequate operating, start-up, shutdown and emergency manuals. - Wrong specification of buy item. - No back up for utilities failure.
12 Fabrication, Construction & Installation Target Main tasks and decisions Main safety issues Acquisitions, construction and installation of the process. Starting up the process and make it to meet the specification. - Contracting and bidding. - Contractor selection. - Procurement. - Installation. - Inspection. - Testing. - Field changes. - Part or components miss-match. - Wrong installation or poor work quality. - Incorrect positioning of sensor/ instruments. - Accessibility. - Lack of monitoring and supervision of contractor. - Miscommunication between designer, contractors and plant owner.
13 Operation Target Main tasks and decisions Main safety issues Safe operations within design specifications and capacity. Improvement of the process. - Selection of safe operation and maintenance principles. - Gathering experience. - Process optimization. - Process improvement - Record keeping on plant histories and technological update. - Poor planning. - Lack of safety analysis. - Lack of technical and reaction knowledge. - Poor safety culture. - Poor inspection and maintenance. - Poor management of change.
14 Value Good project & good implementation Good project & poor implementation Poor project & good implementation Poor project & poor implementation Idea R&D Pre-design Basic design Detailed design Fabrication/Installation Operation
NexantThinking PERP PROGRAM Ethylene PERP
NexantThinking 00101.0013.4104 Ethylene PERP 2013-4 NexantThinking Ethylene PERP 2013-4 December 2013 Bonaire Le This Report was prepared by Nexant, Inc. ( Nexant ) and is part of the NexantThinking suite.
A syngas network for reducing industrial carbon footprint and energy use
A syngas network for reducing industrial carbon footprint and energy use Professor Dermot J Roddy Newcastle University www.ncl.ac.uk/energy Sustainable Thermal Energy Management in the Process Industries
Nufarm DNBP as a Styrene Polymerization Retarder
Nufarm DNBP as a Styrene Polymerization Retarder DNBP (2,4-dnitro-6-sec butyl phenol) is the most commonly used polymerisation control additive in the distillation of styrene monomer. It is used similarly
Appendix F: Hazardous Gases and Vapors
Appendix F: Hazardous Gases and Vapors The following pages contain excerpts from the National Fire Protection Association (NFPA) publication NFPA 497M Classification of Gases, Vapors, and Dusts for Electrical
Roud table two Refinery & Petrochemical Integration
Roud table two Refinery & Petrochemical Integration CAIRO: 15 / 16 February 2016 Questions on the global view 1. Owner s STRATEGY: NOCs and IOCs do they have different drivers? 2. SAVE the PLANET: change
Chemical Industry Outlook
Chemical Industry Outlook August 14-15, 2014 The Langham Boston, MA Presented By IHS Chemical: Mark Eramo Vice President, Chemical Insights mark.eramo@ihs.com Best-in-Class Brands Brought together to form
PERP Program New Report Alert January 2004
PERP Program New Report Alert January 2004 Nexant s ChemSystems Process Evaluation/Research Planning program has published a report, Propylene (02/03-8). Background A continuing trend in the propylene
Biorefinery viability in a world of low oil and gas prices
Biorefinery viability in a world of low oil and gas prices Tom Browne Program Manager, Biorefinery World Congress on Industrial Biotechnology July 22, 2015 I ve been using this slide for some time now
GCC PETROCHEMICALS & CHEMICALS INDUSTRY Facts & Figures 2012
GCC PETROCHEMICALS & CHEMICALS INDUSTRY Facts & Figures 2012 1 GCPA_2012_Facts_Figures_1111.indd 1 12.11.13 18:33 About The Gulf Petrochemicals and Chemicals Association (GPCA): The Gulf Petrochemicals
Process Data Descriptions for the production of synthetic organic materials
Process Data Descriptions for the production of synthetic organic materials Input data for the MATTER study L.A.J. Joosten 98028 Department of Science, Technology and Society (Natuurwetenschap en Samenleving)
December Feedstocks move up in December resulting in upward pressure on polymer prices
December 2017 Feedstocks move up in December resulting in upward pressure on polymer prices 0845 34 54 560 www.plastribution.co.uk IMPORTANT INFORMATION The know-how hub Earlier this year we released a
Polymer MS/PhD Qualifying Exam
Polymer MS/PhD Qualifying Exam FALL 2012 Time = 3 h Closed Books/Notes Use ONE blue book for each part. PART-1: General Polymer Chemistry 1. Write the structural repeat units for the following polymers:
The Use of ETHANOX and ETHAPHOS Antioxidants in FDA Regulated Applications
The Use of ETHANOX and ETHAPHOS Antioxidants in FDA Regulated Applications TABLE OF CONTENTS The Use of ETHANOX AND ETHAPHOS Antioxidants in FDA Regulated Applications... 1 Part 175 - Indirect Food Additives:
Petrochemical Industry in Malaysia
OVERVIEW Petrochemical Industry in Malaysia The petroleum and petrochemicals industry is one of the leading industries in Malaysia. From being an importer of petrochemicals, Malaysia is today an exporter
NACD.NET 2 TABLE OF CONTENTS
NACD.NET 1 NACD.NET 2 TABLE OF CONTENTS 3 4 4 5 7 8 9 11 12 14 PLASTICS: A BRIEF HISTORY AND WHERE WE ARE TODAY KEY PLASTC TERMINOLOGY T SIX PLASTICS THAT DOMINATE THE INDUSTRYO LOOK FOR IN 2015 HDPE -
Report on Developing Baseline Specific Energy Consumption in Petrochemicals Industry in India
Report on Developing Baseline Specific Energy Consumption in Petrochemicals Industry in India April 2013 www.deloitte.com/in Disclaimer The views expressed in this document do not necessarily reflect the
DESCRIPTION ASTM 1418 ISO/DIN 1629 Page. SBR Styrene Butadiene Rubber SBR SBR 6. NR Natural Rubber NR NR 6
CALVOSEALING Plancha Rubber Sheet de caucho Elastomer: CALVOSEALING offers a wide range of rubbers for use in general industry. Our company is able to offer 10 types of elastomers where each one offering
PERP Program Styrene from Ethane and Benzene New Report Alert
PERP Program Styrene from Ethane and Benzene New Report Alert January 2007 Nexant s ChemSystems Process Evaluation/Research Planning program has published a new report, Styrene from Ethane and Benzene
PLATTS PETROCHEMICAL ALERT
PLATTS PETROCHEMICAL ALERT A QUICK GUIDE FOR PCA USERS KEY PAGES MANY MARKETS. ONE VOICE. APRIL 2017 www.platts.com/petrochemicals PETROCHEMICALS PLATTS PETROCHEMICAL ALERT (PCA) Feedstocks Platts Petrochemical
Plastics Recycling. Datchanee Pattavarakorn Industrial Chemistry, Science, CMU
2 0 Plastics Recycling 9 7 8 3 Datchanee Pattavarakorn Industrial Chemistry, Science, CMU Why recycle plastics? Waste emissions Industrial waste Domestic waste Why recycle plastics? Waste emissions 640
PGC5000 Series Process Gas Chromatographs
PGC5000 Series Process Gas Chromatographs Designed for Reliability and Simplicity PGC5000A Master Controller PGC5000B Smart Oven ABB Inc. Process Analytics 843 N. Jefferson Street Lewisburg, WV, 24901
Appendix A Analytical Methods for Air Sampling
Analytical s Air Sampling Acenaphthene TO-13A PUF / XAD 10 0.4 Acenaphthylene TO-13A PUF / XAD 10 0.35 Acetaldehyde Acetone TO-15 Can or Bag 1.9 0.47 Acetonitrile TO-15 Can or Bag 1.7 0.12 Acetophenone
On-purpose Olefins through CATOFIN -CATADIENE Technologies
On-purpose Olefins through CATOFIN -CATADIENE Technologies Global Propylene & Derivatives Summit Sunil Panditrao Technology Manager CB&I Agenda Cracker Feedstock Trends Commercial Routes to Propylene CATOFIN/CATADIENE
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ENVIRONMENTAL CONSERVATION LABORATORIES JACKSONVILLE 4810 Executive Park Court, Suite 111 Jacksonville, FL 32216 Lori S. Mangrum Phone: 904 296 3007 Email address:
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Biobased materials and fuels via methanol The role of integration
Biobased materials and fuels via methanol The role of integration Joint Task 33 & IETS workshop at Göteborg, Nov2013 Ilkka Hannula VTT Technical Research Centre of Finland 2 Gasification and Gas Cleaning
Petrochemical Industries in Egypt
Federation of Egyptian Industries Chamber of Chemical Industries Petrochemical Industries in Egypt Present and Future Dr. Sherif El-Gabaly Chairman, Chamber of Chemical Industries 2015 1 Chemical / Petrochemical
Braskem: New ways to look at the world
Braskem: New ways to look at the world Workshop for Sustainable Production of Biopolymers and other bio-based products July, 2012 Agenda Introduction: Braskem Innovation and Technology Braskem Green Ethylene
Technical Note TN-114 rev 16 wy/wh.11-04
Sensor Specifications And Cross-Sensitivities Technical Note TN-114 Note: All performance specifications are subject to change without notice and are based upon conditions at 68 o F (20 o C), 50% relative
Product Shelf Life/Expiration Date Policy
Acetic Acid 99.7% Glass and Polyethylene 24 Acetic Acid Dilutions Glass and Polyethylene 24 Acetone >99.5% Polyethylene 36 Acetone >99.5% Metal 12 Acetone 85% / IPA 15% Blend Polyethylene 18 Ammonium Chloride
ICIS Margin Polyethylene (PE) Asia Methodology
Copyright 2015 Reed Business Information Ltd. ICIS is a part of the Reed Elsevier plc group ICIS Margin Polyethylene (PE) Asia Methodology This document is intended to provide methodology support for customers
Draeger-Tubes and accuro Pump
Draeger-Tubes and accuro Pump Trusted Technology that s ahead of its time Accurate Easy to read Flexible Fast Specific Easy to use Maintenance free Multi-Gas Detector accuro pump One handed operation What
November Nanticoke Refinery Reduction plan summary (OR 455/09)
S. Kuntz Nanticoke Refinery Manager 519.587.4992 November 2015 Nanticoke Refinery Reduction plan summary (OR 455/09) Provincial regulations set out requirements for business owners to inform Ontarians
Oxygen Sensor Probes. Options for a Wide Range of Sensing Environments. Sensors
Oxygen Sensor Probes Oxygen sensor probes typically are available in a variety of designs and with each of our standard coating formulations (FOXY, FOSPOR and HIOXY). Custom probes and accessories are
Preferred. Steel, Epoxy Powder Coated. Satisfactory. Limited
Corrosion Resistance We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical corrosion. All materials are affected by corrosion in some manner.
Safe Handling of Import-Containers
Labor Protection and Product Safety Safe Handling of Import-Containers Detection of Toxic Gases in Containers GDA2 A Tool for Safe Screening Airsense Founded April 1996 in Schwerin, Germany Business area:
Autocatalytic Decomposition of Cumene Hydroperoxide at Low Temperature Conditions
Autocatalytic Decomposition of Cumene Hydroperoxide at Low Temperature Conditions Chin-Chuan Chen, Chi-Min Shu and Chan-An Yeh Process Safety and Disaster Prevention Laboratory, Department of Environmental
EVALUATION OF OZONE IMPACTS OF VOLATILE ORGANIC COMPOUNDS AND CHLORINE
EVALUATION OF OZONE IMPACTS OF VOLATILE ORGANIC COMPOUNDS AND CHLORINE WILLIAM P. L. CARTER COLLEGE OF ENGINEERING CENTER FOR ENVIRONMENTAL RESEARCH AND TECHNOLOGY UNIVERSITY OF CALIFORNIA, RIVERSIDE,
Energy and GHG Reductions in the Chemical Industry via Catalytic Processes: ANNEXES
Energy and GHG Reductions in the Chemical Industry via Catalytic Processes: ANNEXES INTERNATIONAL COUNCIL OF CHEMICAL ASSOCIATIONS DECHEMA/IEA/ICCA 2013 Table of content Introductory Remark... 3 Annex
Rheological Effect of Zinc Surfactant on the TESPT-Silica Mixture in NR and S-SBR Compounds. Compression molding
Index Volume XVII (Bold numbers refer to original contribution) Subject Index A Acrylic fibers see Fibers Acrylonitrile butadiene styrene copolymer BASF buys Styrene Unit... 287 LG Chem Announces Plan
Phenol, Acetone, Cumene
PERP/PERP ABSTRACTS 2010 Phenol, Acetone, Cumene PERP 09/10-4 Report Abstract February 2012 PERP 09/10-4 February 2012 Alexander Coker CHEMSYSTEMS PERP PROGRAM Nexant s ChemSystems Process Evaluation/Research
SCOTT Method TO-14A/15/17
SCOTT Method TO-14A/15/17 Calibration Standards Benefits and Features SCOTT technical expertise in engineering Method 14A/15/17, HAPS and TIC calibration standards, sulfur mixes and vapor intrusion products
In 2016, Sarnia chemical plant prepared a new plan for the following substance:
D. Luecke Sarnia Chemical Plant Manager 519.339.2757 December 2016 Sarnia Chemical Plant Reduction plan summary (OR 455/09) Provincial regulations set out requirements for business owners to inform Ontarians
Low mg/m
1 (7) CWA-9.2.3 Nerve Blister Library specified agents GA, GB, GD, GF VX HD L Low mg/m 3 0.1 0.1 2 2 Library unspecified agents/cases Nerve precursors Vesicant precursor - - s in hazardous concentration
PERP Program New Report Alert
PERP Program New Report Alert March 2005 Nexant s ChemSystems Process Evaluation/Research Planning program has published a new report, (03/04-4). Background is the lowest molecular weight primary alcohol
Process Safety Metrics
Global Process Safety Metrics Driving Consistency and Improvement Tim Overton Chief Process Safety Engineer The Dow Chemical Company (Chair: CCPS Metric Project) Presented to: AICHE Spring Meeting/CCPS
PETROCHEMICALS OUTLOOK OF MALAYSIA IN 2010 AND ITS FUTURE TRENDS CHOO EE LAINE UNIVERSITI TUNKU ABDUL RAHMAN
PETROCHEMICALS OUTLOOK OF MALAYSIA IN 2010 AND ITS FUTURE TRENDS CHOO EE LAINE UNIVERSITI TUNKU ABDUL RAHMAN ii DECLARATION I hereby declare that this project report is based on my original work except
PROSPECTUS Global Cost Competitiveness in the Petrochemical Industry
PROSPECTUS Global Cost Competitiveness in the Petrochemical Industry PROSPECTUS January 2013 Global Cost Competitiveness in the Petrochemical Industry 44 South Broadway, 4th Floor, White Plains, NY 10601-4425
ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES
1 ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES The main advantages and improvements in drainage networks that will be obtained by the use of PE MAGNUM pipes, in comparison to PVC pipes are: 1.
Military Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine
Direct fermentation for Isobutene, Butadiene, and propylene production: a platform for renewable plastics, synthetic rubber, and fuels
Direct fermentation for Isobutene, Butadiene, and propylene production: a platform for renewable plastics, synthetic rubber, and fuels December 9 th 2014 Recent news 2 3 Global Bioenergies at a glance
Pharmaceutical Packaging Materials Quality Control and USP Compliance: Agilent Cary 630 FTIR
Pharmaceutical Packaging Materials Quality Control and USP 661.1 Compliance: Agilent Cary 63 FTIR Application Note Pharmaceutical Testing and Research Author Frank Higgins Agilent Technologies, Inc. Introduction
Anellotech and Suntory Enter Next Phase of Strategic Partnership to Develop 100 Percent Bio-Based Plastics for Sustainable Beverage Bottles
Anellotech and Suntory Enter Next Phase of Strategic Partnership to Develop 100 Percent Bio-Based Plastics for Sustainable Beverage Bottles Construction completed, installation to commence on fully-integrated
Emission Testing August 2013 EPA 4 Benzene Combustor Inlet/Outlet Testing
Page: 1 of 12 Gate 38B, 45 Friendship Rd Port Botany NSW 2036 Dear Mr G Millard, August 2013 EPA 4 Benzene Combustor Inlet/Outlet Testing Tests were performed 10th August 2013 to determine emissions from
November Nanticoke Refinery Reduction plan summary (OR 455/09)
R. Henderson Nanticoke Refinery Manager 519.587.4992 November 2014 Nanticoke Refinery Reduction plan summary (OR 455/09) Provincial regulations set out requirements for business owners to inform Ontarians
Process Economics Program
IHS Chemical Process Economics Program Report 289 New Routes to Styrene and para-xylene By Dipti Dave IHS Chemical agrees to assign professionally qualified personnel to the preparation of the Process
The Uhde STAR process Oxydehydrogenation of light paraffins to olefins
The Uhde STAR process Oxydehydrogenation of light paraffins to olefins A company of ThyssenKrupp Technologies Uhde ThyssenKrupp 2 Table of contents 1. Company profile 3 2. Introduction 4 2.1 Steam reforming
Filament wound Plastic Self-lubricating Bearings
Filament wound Plastic Self-lubricating Bearings Filament wound Plastic Self-lubricating Bearings CSB-CRB: Glass fiber epoxy-impregnated with PTFE and high strength fibers CSB-CRG: Glass fiber epoxy-impregnated
NexantThinking TM. On-Purpose Propylene: Is Propane the Best Feedstock? Special Reports. Prospectus September 2014
NexantThinking TM Special Reports On-Purpose : Is Propane the Best Feedstock? Prospectus September 2014 Special Reports NexantThinking TM Special Reports On-Purpose : Is Propane the Best Feedstock? Prospectus
Series FBE-4 Type Phenolic Epoxy Powders Fusion Bonded Epoxy. General Description: Powder Feature: Particle Size Distribution (% undersize):
General Description: FBE- Type Phenolic Epoxy FBE- pure primer epoxy powders are based on epoxy (Novolac) and phenolic resins. FBE- pure epoxy powder creates a coating with outstanding adhesion to metal,
Opportunities for Biomass Use in Existing Infrastructure Cofiring and Beyond
October 9, 2013 Biological Solutions Forum Meeting Our GHG Goals Opportunities for Biomass Use in Cofiring and Beyond Jamie Stephen, PhD Managing Director, TorchLight Bioresources Fellow, Queen s Institute
Environmental Risk Analysis of Chemicals Transported in Railroad Tank Cars
Environmental Risk Analysis of Chemicals Transported in Railroad Tank Cars POOJA ANAND CHRISTOPHER P. L. BARKAN DAVID J. SCHAEFFER CHARLES J. WERTH BARBARA S. MINSKER University of Illinois at Urbana-Champaign
A constraint synonymous with bottleneck.
Ethylene is and has been the bellwether of the health of the global petrochemical markets as it is the largest by volume basic chemical used in the manufacture of many durable and non-durable goods. The
The Outlook and Challenges facing the Chemical Industry Implications for the Industry in UAE?
The Outlook and Challenges facing the Chemical Industry Implications for the Industry in UAE? Prepared for: Abu Dhabi International Downstream Summit Dr. Andrew Spiers aspiers@nexant.com Nexant Energy
Greenhouse Gas Reporting Program. XML Reporting Instructions for Subpart X Petrochemical Production
Greenhouse Gas Reporting Program XML Reporting Instructions for Subpart X Petrochemical Production United States Climate Change Division Washington, DC January 24, 2017 These instructions explain how to
3M Dyneon Fluoropolymers. Product Information. Dyneon solutions. for the Chemical Processing Industry
Fluoropolymers Product Information Dyneon solutions for the Chemical Processing Industry Fluoroplastics Chemical Resistance (Aging Duration of 1000 Hours) Chemicals Concen. % Temp. C PTFE & TFM Modified
Flexible Polyurethane Foams from Recycled PET
Flexible Polyurethane Foams from Recycled PET Flexible Polyurethane Foams from Recycled PET Peter Rossi, Edward Kosior, Pio Iovenitti, Syed Massod and Igor Sbarski IRIS, Swinburne University, Hawthorn,
50 Years of PSA Technology for H2 Purification
50 Years of PSA Technology for H 2 Purification 1 50 Years of PSA Technology for H2 Purification The first industrial application of Pressure Swing Adsorption (PSA) went on stream in 1966 at a Union Carbide
Shale gas Reshaping the US chemicals industry
Shale gas Reshaping the US chemicals industry October 2012 A current look at the chemicals industry value chain At a glance The impact of shale gas on domestic chemical companies has been to decrease the
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
Persian Gulf Petrochemical Industries Company
Persian Gulf 45 Projects / Direct Karoon Petrochemical Co. Isocyanates Phase-2 Location: Mahshahr Special Economic Zone Area: 34 Hectares (Phase 1 & 2) Start date: 2006 Project Production Date: 2016 Ownership:
Plastic pipe clamp CLIC TOP 8 64
Plastic pipe clamp CLIC TOP 8 64 Technical data sheet 12/2014 1 1. Product description The most efficient mounting system for pipes, cables and many other applications. Diameter dimensions ranging from
RELIANCE INDUSTRIES LIMITED Vadodara Manufacturing Division Vadodara (Gujarat)
First Prize Petrochemicals RELIANCE INDUSTRIES LIMITED Vadodara Manufacturing Division Vadodara (Gujarat) Unit Profile The Reliance Group, founded by Dhirubhai H. Ambani (1932-2002), is Indias largest
Select Al2O3 MAPD : a new Inert Al2O3 column for the trace analysis of polar reactive hydrocarbons.
GC Columns Select Al2O3 MAPD : a new Inert Al2O3 column for the trace analysis of polar reactive hydrocarbons. Jaap de Zeeuw and Coen Duvekot Varian, Inc. Middelburg, The Netherlands Varian PO Box 8033,
End of Life Recovery Options
Plastic Acetal (POM) Glides (Brooks) Recycled POM Acrylonitrile Butadiene Styrene (ABS) High Density Polyethylene (HDPE) Low Density Polyethylene (LDPE, LLDPE) Amr Caps, Leg Cap Glide, Spacers (Insight
Storage Racks, Display Cases, and Shelving
Permit Requirements: Storage Racks, Display Cases, and Shelving Height of Highest Shelf: Requirement: Up to 5 9 above the floor No permit required 5 9 to 8 above the floor Anchors and bracing. Building
PEER REVIEWED FINAL REPORT LCI SUMMARY FOR SIX TUNA PACKAGING SYSTEMS. Prepared for THE PLASTICS DIVISION OF THE AMERICAN CHEMISTRY COUNCIL
PEER REVIEWED FINAL REPORT LCI SUMMARY FOR SIX TUNA PACKAGING SYSTEMS Prepared for THE PLASTICS DIVISION OF THE AMERICAN CHEMISTRY COUNCIL by FRANKLIN ASSOCIATES, A DIVISION OF EASTERN RESEARCH GROUP,
PERP/PERP ABSTRACTS Bio-Routes to para-xylene PERP 2011S3
PERP/PERP ABSTRACTS 2010 Bio-Routes to para-xylene PERP 2011S3 Report Abstract March 2012 March 2012 Alan J. Nizamoff CHEMSYSTEMS PERP PROGRAM The ChemSystems Process Evaluation/Research Planning (PERP)
Gas-chemical Complexes as a major factor in Innovation Development of Chemical Industry in the East of Russia
Gas-chemical Complexes as a major factor in Innovation Development of Chemical Industry in the East of Russia L.A.Platonov, E.P.Maysyuk, A.K.Izhbuldin Abstract: There are favorable preconditions for construction
Sensor Specifications and CroSS- Sensitivities
Sensor Specifications and CroSS- Sensitivities Disclaimer: Technical Note TN-114 presents specifications, cross-sensitivities, and calibration information on select RAE Systems sensors. All specifications
Cleanroom Swabs. Microdenier Polyester Foam ESD Cotton Specialty
Cleanroom Swabs Microdenier Polyester Foam ESD Cotton Specialty Sterile Cleaning Validation & TOC Validation Kits Alpha Absorbond CleanFoam ESD-Safe Cotton Specialty General Purpose Page 1 Table of Contents
A new process offers a cost competitive route to the production of polymer grade ethylene glycol from corn starch
A new process offers a cost competitive route to the production of polymer grade ethylene glycol from corn starch James Schreck, Brooke Albin, Nye Clinton, Marion Bradford, Mark Nunley, Alex Buck, Don
1st Pass 1st Pass 1st Pass 2nd Pass 2nd Pass. 1st Pass 1st Pass 1st Pass 2nd Pass 2nd Pass
Gas Adsorbent Media Selection Guide Selection by Application Type Note 1: Many applications with heavy loading levels and mixed contaminants may require the use of two or more types of adsorbent medias
10/2/2013. Gas CHEMICAL PLANTS AMMONIA METHANOL UTILITIES TOWN GASS SUPPLIES ENERGY INTENSIVE INDUSTRIES. Power Generation
Gas Burning Feed Stock UTILITIES TOWN GASS SUPPLIES ENERGY INTENSIVE INDUSTRIES Power Generation CHEMICAL PLANTS AMMONIA METHANOL 1 Fundamentals of Natural Gas Processing Natural gas has been formed by
3M Thermal Bonding Film 588
Technical Data March 2015 3M Thermal Bonding Film 588 Product Description 3M Thermal Bonding Film 588 is a high strength, flexible, nitrile phenolic based thermosetting adhesive film. It can be heat or
Ethane downstream in Middle East & Egypt Prospects to the future
Ethane downstream in Middle East & Egypt Prospects to the future Eng./ Ihab Yahia Marketing Research Department Head Sidi Kerir Petrochemicals Co. SIDPEC ihab.yahia@sidpec.com Outlines 1- Ethylene demand
Chemistry of Petrochemical Processes
Chemistry of Petrochemical Processes ChE 464 Instructor: Dr. Ahmed Arafat, PhD Office: building 45 room 106 E-mail: akhamis@kau.edu.sa www.kau.edu.sa.akhamis files Book Chemistry of Petrochemical Processes
Energy efficiency and GHG emissions: Prospective scenarios for the Chemical and Petrochemical Industry
Energy efficiency and GHG emissions: Prospective scenarios for the Chemical and Petrochemical Industry Boulamanti A., Moya J.A. 2017 EUR 28471 EN This publication is a Science for Policy report by the
CHEMCAST is the only high quality acrylic sheet that can provide you with short runs capability and color selection to fit your specific needs.
INTRODUCTION What makes CHEMCAST acrylic sheet notably different is: CHEMCAST is the only high quality acrylic sheet that can provide you with short runs capability and color selection to fit your specific
Chemical and Energy Training
Chemical and Energy Training Prospectus Learn More and Register: ihs.com/chem-edu Chemical and Energy Training Petrochemical Workshops Understanding the Global Petrochemical Industry...1-5 Petrochemical
Performance Evaluation of Deethanizer Column Using Real Time Optimization
Performance Evaluation of Deethanizer Column Using Real Time Optimization Renanto Handogo, Indra Darmawan, Fadillah Akhbar Marsha, Juwari Department of Chemical Engineering Institut Teknologi Sepuluh Nopember
HIGH-PILED COMBUSTIBLE STORAGE
CHAPTER 23 HIGH-PILED COMBUSTIBLE STORAGE SECTION 2301 GENERAL 2301.1 Scope. High-piled combustible storage shall be in accordance with this chapter. In addition to the requirements of this chapter, the
Global Petrochemical Outlook. Ben Morse Senior Editor
Global Petrochemical Outlook Ben Morse Senior Editor AGENDA Crude oil overview Crude, natural gas & light vs heavy feedstocks Feedstock impact on polymers How to follow benzene China & Middle East developments
Chemicals & Petrochemicals sector
1 Department of Industrial Policy and Promotion Department of Chemicals and Petrochemicals Chemicals & Petrochemicals sector Achievements Report January 18, 2017* MAKE IN INDIA Table of Contents 03 Policy
Comparative analysis of the first series of chemical BREFs
EUROPEAN COMMISSION DIRECTORATE-GENERAL JRC JOINT RESEARCH CENTRE Institute for Prospective Technological Studies Competitiveness and Sustainability Unit European IPPC Bureau Integrated Pollution Prevention
Key Points on Point of Generation. Julie Marks, PE (573)
Key Points on Point of Generation Julie Marks, PE (573)638-5015 Hazardous Waste POG POG involves two issues: WHEN is a haz waste generated? WHERE does it become subject to RCRA regs? Hazardous Waste POG
RELIANCE INDUSTRIES LIMITED NAGOTHANE MANUFACTURING DIVISION
First Prize Petrochemicals RELIANCE INDUSTRIES LIMITED NAGOTHANE MANUFACTURING DIVISION Raigad (Maharashtra) Unit Profile Nagothane Manufacturing Division (NMD) is one of the six major manufacturing sites
Thomas G. Braga Manager, Research and Development. SulfaTreat, a Business Unit of M I L.L.C. A Smith/Schlumberger Company
Thomas G. Braga Manager, Research and Development SulfaTreat, a Business Unit of M I L.L.C. A Smith/Schlumberger Company Who is SulfaTreat? A World Leader in H 2 S Removal for More than a Decade Today
60years. World-scale engineering capabilities
World-scale engineering capabilities ThyssenKrupp Industrial Solutions offers a wide portfolio of engineering, procurement and construction services for the Russian and CIS markets. Our fields of expertise
GAS SUPPLIER INTERCONNECTION PROJECT FACT SHEET
INNOVATION GAS SUPPLIER INTERCONNECTION PROJECT FACT SHEET Please provide the following information regarding your potential project or expansion. SECTION 1 - PROJECT AND CONTACT INFORMATION PROJECT NAME: