VPA 8 Status: October 2014 Test Certificates. Containers made of plastic with bung hole or removable lid 4. Fibre drums 5

Size: px
Start display at page:

Download "VPA 8 Status: October 2014 Test Certificates. Containers made of plastic with bung hole or removable lid 4. Fibre drums 5"

Transcription

1 VPA 8 Status: October 2014 s Survey: page s for: Sheet steel containers with bung hole with / without PE inner receptacle 2 Sheet steel containers with removable lid with/without PE inner receptacle 3 Containers made of plastic with bung hole or removable lid 4 Fibre drums 5 Cans and canisters made of plastic 6 Cans and canisters made of metal 7 Bottles made of plastic 8 Bottles made of aluminium 9 Flexible IBC 10 Cardboard IBC 11 Metal IBC, rigid plastic IBC, composite IBC 12 made of corrugated cardboard 13 Bags and sacks 14 Shrink and stretch wrap 15 Boxes made of wood / wooden materials 16 Pallets from wood 17 Foam moulded parts 18 Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 1

2 s No.: Sheet steel containers with bung hole with / without PE inner receptacle - Customer/ Lot-/Serial-No: Nominal sheet thickness: Material / Open-head drum: Material / Inliner: No.: Nominal Capacity: Total Height Outer Diameter Total mass (kg) Mass-Inliner (kg) Brimful Capacity (l) Pneumatic Leagage Test Visual inspection General cleanliness, seams, folds, closures, coatings inside/outside, no corrosion and no condensate inside, UN-Marking Type according to technical spedification dates... / / Sheet steel containers with bung hole with / without PE inner receptacle Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 2

3 s No.: Sheet steel containers with removable lid with / without PE inner receptacle - Customer/ Lot-/Serial-No: Nominal sheet thickness: Material / Open-head drum: Material / Inliner: No.: Nominal Capacity: Total Height Outer Diameter over the tension ring Total mass (kg) Mass-Inliner (kg) Brimful Capacity (l) Pneumatic Leagage Test Visual inspection General cleanliness, seams, folds, closures, coatings inside/outside, no corrosion and no condensate inside, lid, closing ring, UN-Marking Type according to technical spedification dates... / / Sheet steel containers with removable lid with / without PE inner receptacle Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 3

4 s No.: Containers made of plastic with bung hole or removable lid - Customer/ Lot-/Serial-No: Material: Barrier Material: No.: Nominal Capacity: Total Height Outer Diameter Mass with / without closure Brimful Capacity Pneumatic Leagage Test Barier Material (kg) Visual inspection General cleanliness, no extrusion blow molding failer, closures, closing ring, lid, seal capability, colouring, UN-Marking (l) Type according to technical spedification dates... / / Containers made of plastic with bung hole or removable lid Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 4

5 No.: Fibre Drums Lot- / Serial-No.: Material / Inliner: -No.: Total Height to top edge lid Sheet thickness body Outer Diameter Number of plies Total mass (kg) Sheet thickness / bottom Nominal Capacity (l) Sheet thickness / lid Leak tightness Inliner Visual inspection General cleanliness, closure, gasket, coatings, glueing, corrosion, printing, lid, closing ring, UN-Marking Type according to technical specification dated... / / Fibre drums Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 5

6 s No.: Cans and canisters made of plastic - Customer/ Lot-/Serial-No: Material: Barrier Material: No.: Nominal Capacity: Total Height Total Width Total Length Outer Diameter Mass with / without closure Brimful Capacity Pneumatic Leagage Test Barrier Material (g) Visual inspection General cleanliness, no extrusion blow molding failer, closures, seal capability, UN-Marking, colouring (l) Type according to technical spedification dates... / / Cans and canisters made of plastic Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 6

7 No.: Cans and canisters made of metal Lot- / Serial-No.: UN- resp. RID/ADR-Marking: Material: -No.: Nominal Capacity: Total Height Brimful Capacity (l) Total Length Total Width Mass with / without closure (g) Outer Diameter Sheet thickness bottom Tin coating (g/m³) Sheet thickness top Sheet thickness body Lid opening air flow pressure. kpa Pneumatic Leakage Test Visual inspection General cleanliness, seams, folds, closures, gaskets, printing, coatings inside/outside, no corrosion and no condensate inside, UN resp. RID/ADR- Marking Type according to technical specification dated... / / Cans and canisters made of metal Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 7

8 s No.: Bottles made of plastic - Customer/ Lot-/Serial-No: Material: No.: Nominal Capacity: Total Height Total Width Total Length Outer Diameter Wall thickness Weight (g) Pneumatic Leagage Test Visual inspection General cleanliness, no particle inclusions, thin places, deformation, pinch-off welds and flashes, surface condition, colouring, UN-Marking Type according to technical spedification dates... / / Bottles made of plastic Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 8

9 No.: Bottles made of aluminium Lot- / Serial-No.: Material: -No.: Nominal Capacity: Wall thickness bottom Total mass Wall thickness top edges Brimful Capacity (l) Thickness body Total Height Outer Diameter Pneumatic Leakage Test Visual inspection General cleanliness, no die marks or wrinkles, indentions, swaf, plastic packing ring, thread, UN-Marking Type according to technical specification dated... / / Bottles made of aluminium Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 9

10 No.: Lot- / Serial-No.: Flexible IBC No.: Nominal Capacity: Dimensions Target Actual Dimensions Target Actual Overall Length Filling shute-lenght Overall Width Filling shute-ø Overall Height Discharge shute-lenght Coating Discharge shute-ø Film Thickness Inliner Apron Length Inliner L x B x H / d x h Type of fabric/ Grammage Body Top (g / m 2 ) Apron Bottom Filling shute Discharge shute Dimenions Inliner Length ( mm ) Material Inliner: Nominal working load (SWL): Width ( mm )...kg Safety Factor (SF):... Antistatic finish: UV-stabiliser: Visuat inspection General cleanliness, no fabric defects, closures, UN-Marking, printing, inliner, belts, seams Type according to technical specification dated... / / Flexible IBC Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 10

11 No.: Cardboard IBC Lot- / Serial No.: No.: Nominal Capacity: Internal Dimensions Length Width Height Thickness Target Actual Target Actual Target Actual Target Actual Composition Paper grade Grammage (g/m 2 ) Outer cover Corrugation Intermediate cover Corrugation Inner cover Target Actual Burst resistance DIN EN ISO 2759 (Pa ) Top to bottom compression resistance DIN EN ISO (N) Puncturing energy DIN Edge crush resistance DIN EN ISO 3037 Water absorption DIN EN ISO 535 Stability of longitudinal edge Wet strengt hof the glue bond Visual Inspection General cleanliness, top flaps, manufacturer s joint, creasing, printing, UN-Marking (J) (kn/m) (g/m²) (N/100 mm) Type according to technical specification dated... / / Cardbord IBC Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 11

12 No.: Metal IBC, rigid plastic IBC, composite IBC Lot- / Serial-No.: Material / Outer Receptacle: Material / Inliner: -No.: Nomal Capacity: Overall Length Total mass (kg) Overall Width Mass Inliner (kg) Overall Height Wall thickness Brimful Capacity (l) Pneumatic Leakage Test Pallet / Timber quality: Visual Inspection General cleanliness, fastenings, seams, no condensate inside, closures, fittings, UN-Marking Clompliant to BAM-GGR 001 (German Dangerous Goodes Rules) Type according to technical specification dated... / / Metal IBC, rigid plastic IBC, composite IBC Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 12

13 No.: made of corrugated cardboard Lot- / Serial-No.: No.: Internal Dimensions Length Width Height Thickness Target Actual Target Actual Target Actual Target Actual Composition Paper grade Grammage (g/m 2 ) Target Actual Outer cover Corrugation Intermediate cover Corrugation Inner cover Burst resistance DIN EN ISO 2759 (Pa ) Top to bottom compression resistance DIN EN ISO (N) Puncturing energy DIN Edge crush resistance DIN EN ISO 3037 Water absorption DIN EN ISO 535 Wet strengt hof the glue bond DIN Visual Inspection General cleanliness, manufacturer s joint, top flaps, creasing, printing, UN-Marking (J) (kn/m) (g/m²) Type according to technical specification dated... / / made of corrugated cardboard Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 13

14 No.: Bags and Sacks Lot- / Serial-No.: -No.: Requirements Material Grammage (g/m 2 ) Film thickness (µm) Target Actual Target Actual Ply 1 Outside ply Ply 2 Ply 3 Ply 4 Ply 5 Ply 6 Ply 7 Dimensions Target Actual Dimensions Target Actual Width Valve width Length Valve lenght Bottom width Gusset dimension Weight (g) Width Welding seam stability Leak thightness Antistatic finish UV-protected Visual Inspection General cleanliness, seams, needling, valve open recess, valve design, colouring, printing, UN-Marking PE-Inliner Target Actual Length Type according to technical specification dated... / / Bags and Sacks Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 14

15 Test Certification-No.: Test Certification Shrink and stretch Wrap Lot- / Serial-No.: Material: No.: Total Width Total Length Gusset Film thickness (µm) Grammage (g/m 2 ) Reel diameter Core diameter Shrink values / longitudinal (%) Shrink values / transverse (%) Colouring Printing Marking Antistatic finish UV-Stabilisation Visual Inspection General cleanliness, border marking, welds Type according to technical specification dated... / / Shrink and stretch wrap Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 15

16 -No.: Boxes made of wood / wooden materials Material: No.: External dimensions Target Actual Total Height Total Width Total Length Board thickness Fasteners Visual Inspection General cleanliness, surface condition, no spits, knot holes, splinters and overlapping fasteners, clear printing, UN-Marking Type According to technical specification dated... / / Boxes made of wood / wooden materials Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 16

17 -No.: Pallets from wood Lot- / Serical-No.: Marking: -No.: Dimensions Length Width Height/Thickness Deck boards Deck boards Stringer boards Bottom boards Bottom boards Blocks Target Actual Target Actual Target Actual Materials / Woods Target Actual Deck boards Stringer boards Bottom boards Blocks Visual Inspection General cleanliness, square edged, no knot holes, spits, tree bark, splinters and midlewed wood; fasteners, printing Type according to technical specification dated... / / Pallets from wood Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 17

18 Manufactuer: -No.: Foam moulded parts Lot- / Serial-No.: Material: -No.: Total overall length Total overall width Total overall height Special dimensions 1 Special dimensions 2 Moisture (%) Volume weight (g/l) Completed weight (g) Welding / Fracture behaviour Visual Inspection General cleanliness, no particle inclusions, defective foam, spits and formation of cracks and crack elements, no deformation and flashes, defect in colour, surface condition, UN-Marking Type according to technical specification dated... / / Foam moulded parts Standard recommandation obligation; Issued by: Verband der Chemischen Industrie e.v. 18

GUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS

GUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS GUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS - ii - GUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION

More information

Chapter 9 Quality assurance Section 9.0 General information

Chapter 9 Quality assurance Section 9.0 General information Section 9.0 General information 9.0.0 Contents 9.0 General information 9.0.0 Contents 9.0.1 Introduction 9.0.2 Quality philosophy 9.0.3 Cleanliness of packaging 9.1 Packaging specification 9.1.0 Introduction

More information

DOSSIER: IBC s for the transport of dangerous goods

DOSSIER: IBC s for the transport of dangerous goods SEPTEMBER 2016 DOSSIER: IBC s for the transport of dangerous goods IBC s or Intermediate Bulk Containers are containers intended to be used for the transport of bulk products (for example ores, grains,

More information

Customer Packaging Guidelines

Customer Packaging Guidelines Customer Packaging Guidelines Customer Packaging Guidelines 05.02.16 v1 CONTENTS Introduction Packaging Tips: Parcels Envelopes Packaging Tips: Pallets Crates Drums Pipes Spools & Reels Packaging Tips:

More information

Chapter 11 Use and handling of packaging Section 11.0 General information

Chapter 11 Use and handling of packaging Section 11.0 General information Section 11.0 General information 11.0.0 Contents 11.0 General information 11.0.0 Contents 11.0.1 Introduction 11.1 Packaging material for areas with explosive atmospheres 11.1.1 Antistatic, dissipative

More information

PART 6 Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, tanks and bulk containers

PART 6 Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, tanks and bulk containers PART 6 Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, tanks and bulk containers - 275 - CHAPTER 6.1 REQUIREMENTS FOR THE CONSTRUCTION

More information

PART 4 PACKING AND TANK PROVISIONS

PART 4 PACKING AND TANK PROVISIONS PART 4 PACKING AND TANK PROVISIONS - 3 - CHAPTER 4.1 USE OF PACKAGINGS, INCLUDING INTERMEDIATE BULK CONTAINERS (IBCs) AND LARGE PACKAGINGS 4.1.1 General provisions for the packing of dangerous goods in

More information

1. General regulations

1. General regulations Page 1 von 1 1. General regulations 1.1 Parts shall be packaged by item. 1.2 The parts will be welded and powder-coated or galvanised at a later stage. The surfaces shall therefore be dry and free of paint,

More information

RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION

RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION PROVISIONAL BILL OF QUANTITIES RAISED ACCESS FLOOR SYSTEM TECHNICAL SPECIFICATION 1 RAISED ACCESS FLOOR SPECIFICATION SYSTEM DESCRIPTION This specification

More information

APC cork sustainable living from the ground up

APC cork sustainable living from the ground up References This specification applies to all APC CORK references of floating floor panels with a cork surface layer, from the collection with the trade name Assortment, Olympian, Gem, Plank. Definition

More information

CORRUGATED HDPE PIPES FOR SEWER AND STORMWATER

CORRUGATED HDPE PIPES FOR SEWER AND STORMWATER 50 corrugated pipes CORRUGATED HDPE PIPES FOR SEWER AND STORMWATER TECHNICAL SPECIFICATIONS SANS 21138-3 ISO 9001/2008 The pipe is black outside and blue on the inside Supplied in lengths of 6 meters.

More information

Engineering Branch Assets Delivery Group

Engineering Branch Assets Delivery Group F.1 SCOPE This Technical Specification shall apply to Fibre Reinforced Plastics or Glass Reinforced Plastics (hereinafter referred to as FRP or GRP) structures and the materials used in their manufacture,

More information

Requirements for the construction and testing of packagings for class 6.2 infectious substances of category A

Requirements for the construction and testing of packagings for class 6.2 infectious substances of category A Chapter 6.3 6.3.1 General Requirements for the construction and testing of packagings for class 6. infectious substances of category A NOTE: The requirements of this Chapter don't apply to packagings used

More information

Packaging Form Comparison:

Packaging Form Comparison: Reinhold Herbert Dipl.Ing.* consulting+ development 61276 Weilrod / Germany www.herbert-consulting.de reinhold.herbert@web.de Packaging Form Comparison: bottelpack bottle versus Non-PVC-bags An integrated

More information

Insulating systems used in agricultural and industrial buildings

Insulating systems used in agricultural and industrial buildings Insulating systems used in agricultural and industrial buildings INTRODUCTION Since years, RECTICEL is a leading manufacturer of systems for internal insulation. The EUROTHANE product range has been especially

More information

Standardized expendable packaging for sea container applications

Standardized expendable packaging for sea container applications VDA Standardized expendable packaging for sea container applications 4525 This VDA Guide pursues the following objectives: As an intermediate step on the way to achieving overarching global Container Management

More information

NOWPak Bottle System. Liner-based bottle system with a pre-cleaned, two-ply, heat-sealed PTFE T420 liner APPLICATIONS FEATURES & BENEFITS

NOWPak Bottle System. Liner-based bottle system with a pre-cleaned, two-ply, heat-sealed PTFE T420 liner APPLICATIONS FEATURES & BENEFITS ADVANED MATERIALS HANDLING NOWPak ottle System Liner-based bottle system with a pre-cleaned, two-ply, heat-sealed PTFE T420 liner The NOWPak Liner-based ottle System is a leading containment and dispense

More information

Insulated Panels. Insulated Roof Systems. Kingspan X-dek. KS1000 XD Longspan Roofpanel. Systems. Insurer Approved

Insulated Panels. Insulated Roof Systems. Kingspan X-dek. KS1000 XD Longspan Roofpanel. Systems. Insurer Approved Insulated Panels 02 2010 Insulated Roof Systems Kingspan X-dek KS1000 XD Longspan Roofpanel Insurer Approved Systems X dek TM Frame-to-Frame Long Spanning Insulated Roof Deck X dek TM is an insulated roof

More information

Quality Standard for ACR Copper Tubes in LWC

Quality Standard for ACR Copper Tubes in LWC Quality Standard for ACR Copper Tubes in LWC Foreword cuproclima is a protected tradename for high-quality seamless copper tubes in levelwound coils (LWC) supplied to manufacturers of heat exchangers for

More information

PTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION

PTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION PTFE BELLOWS TECHNICAL SPECIFICATION 1. MATERIALS 1.1 PTFE Only virgin (not reprocessed) PTFE conforming to ASTM D 1457, type III, IV or V shall be used for the production of bellows; the PTFE raw material

More information

R-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions

R-Group Finland Oy. RTA, RWTL and RWTS Lifting anchors Design instructions R-Group Finland Oy RTA, RWTL and RWTS Lifting anchors Design instructions According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 28.12.2016 2 Table of contents 1 DESCRIPTION

More information

BRUSHES WITH SHANK 62 63

BRUSHES WITH SHANK 62 63 6 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0.5 0.0 STH 0.50 0.00 ROH 0.50 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 75 9 /8 5 5/8 8 5,000

More information

Fabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Trapezoidal Plus KS1000 DLTR PLUS 1.3 & 0.8

Fabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Trapezoidal Plus KS1000 DLTR PLUS 1.3 & 0.8 Fabrications, Safety & Lighting Solutions Kingspan Day-Lite KS1000 DLTR PLUS 1.3 & 0.8 Applications Designed to be an integral part of the Trapezoidal Roof panel system, Kingspan Day-Lite is a range of

More information

GHSP Supplier Packaging Requirements and Guidelines

GHSP Supplier Packaging Requirements and Guidelines Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns

More information

Packing Design for Canned Fruit

Packing Design for Canned Fruit Packing Design for Canned Fruit KTH 2009-03-06, Department of Solid Mechanics Design project in SE2127 Packaging Materials, 2009 Frida Schildauer, 820429-1986 Pedro Soler, 841216-A419 Introduction One

More information

PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION

PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION DRAINAGE SOLUTIONS SINCE 1908 PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION PROVEN PERFORMANCE ARMTEC.COM

More information

Construction. S-Vap 5000E SA Self-adhesive Vapour Barrier. Product Description

Construction. S-Vap 5000E SA Self-adhesive Vapour Barrier. Product Description Roofing Product Data Sheet Edition 11.2014 / xtra UK Identification no. 02 09 45 05 100 0 000019 Version no. 03 S-Vap 5000E SA Self-adhesive Vapour Barrier Product Description S-Vap 5000E SA is a multi-layer

More information

1.1 Dimensions Timber of up to mm thick (KD) can be heat-treated. The maximum thickness varies depending on the type of timber.

1.1 Dimensions Timber of up to mm thick (KD) can be heat-treated. The maximum thickness varies depending on the type of timber. Page: 1 of 6 1 Timber details 1.1 Dimensions Timber of up to 60-65 65 mm thick (KD) can be heat-treated. The maximum thickness varies depending on the type of timber. 1.2 Quality In principle, only timber

More information

Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)

Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as

More information

TRANSPORT OF DANGEROUS GOODS

TRANSPORT OF DANGEROUS GOODS Recommendations on the TRANSPORT OF DANGEROUS GOODS Model Regulations Volume II Twentieth revised edition UNITED NATIONS ST/SG/AC.10/1/Rev.20 (Vol.II) Recommendations on the TRANSPORT OF DANGEROUS GOODS

More information

Insulated Roof & Wall Panels Solutions. Product Data Sheet. Trapezoidal Insulated Wall Panel KS1000 RW

Insulated Roof & Wall Panels Solutions. Product Data Sheet. Trapezoidal Insulated Wall Panel KS1000 RW Insulated Roof & Wall Panels Solutions Insulated Wall Panel KS1000 RW Applications The KS1000 RW is a metre wide through-fix trapezoidal profiled insulated wall panel which is ideal for both horizontal

More information

The perfect PVC Additives

The perfect PVC Additives The perfect PVC Additives INNOVATIONS FOR PVC PROCESSING 2 About Us Our focus is on the supply of stabilisers for window profiles, foamed profiles, technical profiles and etruded sheets made from rigid

More information

R-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved

R-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved R-Group Finland Oy REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 10.2.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...

More information

Dossier: What s the difference between P 650 (ADR) and PI 650 (IATA)?

Dossier: What s the difference between P 650 (ADR) and PI 650 (IATA)? DECEMBER 2015 Dossier: What s the difference between P 650 (ADR) and PI 650 (IATA)? Packing instruction 650 from both ADR and IATA imposes certain requirements on the packaging used for the transport of

More information

Omega seals Trelleborg Ridderkerk BV

Omega seals Trelleborg Ridderkerk BV Omega seals Trelleborg Ridderkerk BV Contents 1 Introduction 3 2 Design of an Omega Seal 3 3 Applications 4 3.1 Immersed tunnels 4 3.2 Bored tunnels 5 3.3 Aqueducts, canals, sluices and other applications

More information

reusable food approved sterilisable strong and durable good rupture and tear resistance cutting die cutting welding bonding sterilising recycling

reusable food approved sterilisable strong and durable good rupture and tear resistance cutting die cutting welding bonding sterilising recycling Biplex characteristics economic reusable food approved sterilisable strong and durable good rupture and tear resistance ecological water and moisture resistant good chemical resistance light-weight dust

More information

NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION. MASTERFORMAT SECTION (Mortarless Concrete Brick Veneer)

NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION. MASTERFORMAT SECTION (Mortarless Concrete Brick Veneer) NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION MASTERFORMAT SECTION 04818 (Mortarless Concrete Brick Veneer) Spec_USA_En_18102005.doc 12/1/2005 Novabrik Page 2 Section 04818 NOVABRIK MORTARLESS

More information

Packaging Handbook for Suppliers. Guidelines for Packaging of Outsourced Items

Packaging Handbook for Suppliers. Guidelines for Packaging of Outsourced Items Packaging Handbook for Suppliers Guidelines for Packaging of Outsourced Items Status: June 2016 Table of Contents 1 Purpose and Area of Application... 3 2 Packaging Requirements... 4 2.1 General Packaging

More information

NUCLEAR. Nuclear Reactor Pressure Vessel Seals

NUCLEAR. Nuclear Reactor Pressure Vessel Seals NUCLEAR Nuclear Reactor Pressure Vessel Seals SEALING CONCEPT Technetics Group is the world s leading manufacturer of Nuclear Reactor Pressure Vessel (RPV) Closure Head Seals. In addition, Technetics Group

More information

Innovative solutions made from aluminium foam for the mechanical engineering sector. Strong lightweight

Innovative solutions made from aluminium foam for the mechanical engineering sector. Strong lightweight Strong lightweight www.havel-mf.de Innovative solutions made from aluminium foam for the mechanical engineering sector Sandwiches Panels Foam filled profiles 3D shaped elements Strong lightweight With

More information

Insulated Roof & Wall Panels. Product Data Sheet. Lo-Pitch Insulated Roof Panel KS1000 LP

Insulated Roof & Wall Panels. Product Data Sheet. Lo-Pitch Insulated Roof Panel KS1000 LP Insulated Roof & Wall Panels Insulated Roof Panel KS1000 LP Applications The KS1000 LP is a secret-fix shallow profiled insulated roof panel with raised side joints. This panel is ideal for all applications

More information

SHRINK WRAP SCAFFOLD SHEETING

SHRINK WRAP SCAFFOLD SHEETING SHRINK WRAP SCAFFOLD SHEETING environmental containment & protection GOOLE SWING BRIDGE [Humberside] Project: shrink wrap Encapsulation of Goole Swing Bridge Purpose: Protect The Dutch River from gritblasting

More information

Technical Specification KeyKeg Slimline 10L, 20L and 30L

Technical Specification KeyKeg Slimline 10L, 20L and 30L Technical Specification KeyKeg Slimline 10L, 20L and 30L Index Technical Specification... 3 KeyKeg Transport and Storage Recommendations... 4 Background... 4 Transport Risks... 4 Secondary Fermentation...

More information

SEWER FORCE MAIN HDPE PIPE

SEWER FORCE MAIN HDPE PIPE SECTION 15150 SEWER FORCE MAIN HDPE PIPE PART 1: GENERAL 1-1 DESCRIPTION: This specification governs the material, pipe, fittings, joining methods and general construction practice for High Density Polyethylene

More information

GHSP Supplier Packaging Requirements and Guidelines

GHSP Supplier Packaging Requirements and Guidelines Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns

More information

Sarnavap 1000E is an unsupported vapour control layer based on PE-LD (Low Density Polyethylen).

Sarnavap 1000E is an unsupported vapour control layer based on PE-LD (Low Density Polyethylen). Roofing Roofing Product Data Sheet Edition 06.2013 Version no. DE 01 English Vapour control layer Product Description Uses Characteristics / Advantages Tests is an unsupported vapour control layer based

More information

D Side lap. Side lap screw spacing < 500mm factory-installed seals on side lap. Decoupling tape > 60mm

D Side lap. Side lap screw spacing < 500mm factory-installed seals on side lap. Decoupling tape > 60mm 25 Side lap screw spacing < 500mm 333.3 15 42 Decoupling tape > 60mm 3 factory-installed seals on side lap Side lap D 201.1 SECTION VIEWS Type L Ridge profile Type R Ridge flashing FLOOR PLAN > 200 overlap

More information

Process Inline Filter, Change-Over

Process Inline Filter, Change-Over Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.

More information

Insulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panel KS1000 RW

Insulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panel KS1000 RW Insulated Roof & Wall Panels Insulated Roof Panel KS1000 RW Applications The KS1000 RW is a through-fix trapezoidal profiled insulated roof panel which can be used for building applications with roof pitches

More information

FERROPLAST Panels: Underway on all roads. Configurator

FERROPLAST Panels: Underway on all roads. Configurator FERROPLAST Panels: Underway on all roads Configurator Trailer Services Technology FERROPLAST installed to meet your requirements. This brochure not only presents you with the many advantages of the long-lived

More information

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection

SECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION

More information

Insulated Panel Systems. 1, d0 IND E N 1350

Insulated Panel Systems. 1, d0 IND E N 1350 Insulated Panel Systems DING TO OR 1, d0-1 ACC IND E N 1350 1 Project: TransWest nv, Kampveldstraat 45, 8020 Oostkamp, Belgium Use: Logistical platform with a negative temperature Technical Information

More information

STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL

STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL BOMBAY TEXTILE RESEARCH ASSOCIATION L.B.S.MARG, GHATKOPAR (W),MUMBAI-400086. WEB : btraindia.com e-mail : btra@vsnl.com What are Standards? Standards are published

More information

Diaphragm seal with flange connection With internal diaphragm, threaded design Model

Diaphragm seal with flange connection With internal diaphragm, threaded design Model Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,

More information

ACOUSTICAL INSULATION (LAGGING) FOR PIPING AND EQUIPMENT

ACOUSTICAL INSULATION (LAGGING) FOR PIPING AND EQUIPMENT ACOUSTICAL INSULATION (LAGGING) FOR PIPING AND EQUIPMENT Specification for Acoustical Insulation (Lagging) for Piping and Equipment 1 of 5 TABLE OF CONTENTS 1.0SCOPE..... 3 2.0REFERENCED PUBLICATIONS...

More information

Insulated Panel System. QuadCore IND. Superior FIRE Protection. Unrivalled THERMAL Efficiency. ENHANCED Environmental Credentials

Insulated Panel System. QuadCore IND. Superior FIRE Protection. Unrivalled THERMAL Efficiency. ENHANCED Environmental Credentials 1 Superior FIRE Protection 2 Unrivalled THERMAL Efficiency 3 ENHANCED Environmental Credentials 4 Longest Performance GUARANTEE Insulated Panel System QuadCore IND Technical Information Projet / Usage

More information

Helicopter drop testing of Type B packages in UK

Helicopter drop testing of Type B packages in UK Helicopter drop testing of Type B packages in UK R. Vaughan* 1 and L. M. Farrington 2 Testing was carried out in UK in 1986 to demonstrate the ability of two type B packages designed to pass the 9 m drop

More information

Specifications for Concrete Embedment Liner

Specifications for Concrete Embedment Liner Specifications for Concrete Embedment Liner Part 1: GENERAL 1.01 SECTION INCLUDES A. Specifications and guidelines for MANUFACTURING high-density polyethylene embedment liners. 1.02 REFERENCES A. American

More information

PACKAGING STANDARD FOR USED LEAD ACID BATTERIES (ULAB)

PACKAGING STANDARD FOR USED LEAD ACID BATTERIES (ULAB) PACKAGING STANDARD FOR USED LEAD ACID BATTERIES (ULAB) ProjecT SPONSORED BY: Club Assist www.clubassist.com.au (03) 9797 8600 PACKAGING STANDARD FOR USED LEAD ACID BATTERIES (ULAB) CONTENTS 1. Introduction

More information

Firestone Polyiso Boards

Firestone Polyiso Boards Firestone Polyiso Boards Superior energy efficiency. Superior protection. Firestone Polyiso Boards POLISOBROUK10.indd 1 1/04/10 14:26 Firestone Polyiso Boards Firestone total roofing systems Since Firestone

More information

ROOFS ROOFS WALLS FLOORS. Energy efficiency for constructions... Always environment-friendly...

ROOFS ROOFS WALLS FLOORS. Energy efficiency for constructions... Always environment-friendly... PRODUCT CATALOG Energy efficiency for constructions... Always environment-friendly... www.prodexcr.com CONSTRUCTION AREA REFLECTIVE THERMAL INSULATION AD AD= ALUMINUM + ALUMINUM 0,39; 0,19; and 0,11 in

More information

POLYGUARD RD-6 A FAIL SAFE PIPELINE COATING SYSTEM FOR REHABILITATION OR GIRTH WELDS ON CATHODICALLY PROTECTED PIPELINES

POLYGUARD RD-6 A FAIL SAFE PIPELINE COATING SYSTEM FOR REHABILITATION OR GIRTH WELDS ON CATHODICALLY PROTECTED PIPELINES POLYGUARD RD-6 A FAIL SAFE PIPELINE COATING SYSTEM FOR REHABILITATION OR GIRTH WELDS ON CATHODICALLY PROTECTED PIPELINES A large percent of corrosion failures on cathodically protected structures are associated

More information

OSNALINE. Tubes and tube bundles. Member of the KME Group. KME Germany AG & Co. KG [GB] OSNALINE

OSNALINE. Tubes and tube bundles. Member of the KME Group. KME Germany AG & Co. KG [GB] OSNALINE OSNALINE Tubes and tube bundles KME Germany AG & Co. KG OSNALINE [GB] Member of the KME Group KME Germany AG & Co. KG Experts in tube bundles KME Germany AG & Co. KG is a member of the KME Group S.p.A.

More information

ITEM 458 WATERPROOFING FOR STRUCTURES

ITEM 458 WATERPROOFING FOR STRUCTURES ITEM 458 WATERPROOFING FOR STRUCTURES 458.1. Description. This Item shall govern for the furnishing and placing of waterproofing on concrete and steel bridge decks of railroad structures and on other structures

More information

Product Data Sheet. Product: Benchmark Wall Liner System

Product Data Sheet. Product: Benchmark Wall Liner System APPLICATION The Benchmark Wall Liner system is to be used as an insulated composite wall panel under site applied fully supported or self-supported aluminium, copper, zinc and stainless steel cladding

More information

Heating elements shall not be used for FRP tank-containers including tank swap bodies.

Heating elements shall not be used for FRP tank-containers including tank swap bodies. Chapter 6.9 6.9.1 General Requirements for the design, construction, equipment, type approval, testing and marking of fibre-reinforced plastics (FRP) tank-containers including tank swap bodies NOTE: For

More information

E. Section Polymer Modified Cement Waterproofing. K. Section Sub drainage: Foundation perimeter drainage.

E. Section Polymer Modified Cement Waterproofing. K. Section Sub drainage: Foundation perimeter drainage. DELTA -DRAIN Section 07 10 00 Dampproofing and Waterproofing PART 1 GENERAL 1.1 SECTION INCLUDES A. Below grade drainage sheets. B. Plaza deck and planter drainage sheets. 1.2 RELATED SECTIONS A. Section

More information

Very Thin Medium Density Fibreboards (MDF) with Paperboard-like Properties as Reusable Packaging Material

Very Thin Medium Density Fibreboards (MDF) with Paperboard-like Properties as Reusable Packaging Material Very Thin Medium Density Fibreboards (MDF) with Paperboard-like Properties as Reusable Packaging Material Folie 1 Current situation Market data for cardboards for packaging (Germany) growth for period

More information

Diffused Aeration Piping Equipment

Diffused Aeration Piping Equipment 1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections

More information

Bentoflex is a bentonitic waterproofing composite, specifically designed for use in construction, consisting of an original, patented, flexible

Bentoflex is a bentonitic waterproofing composite, specifically designed for use in construction, consisting of an original, patented, flexible Bentoflex is a bentonitic waterproofing composite, specifically designed for use in construction, consisting of an original, patented, flexible structure and sealed selvages. Bentoflex contains a sodium

More information

4G/Y37.5/S/** USA/+CO1382

4G/Y37.5/S/** USA/+CO1382 T-MAK Labs, Inc., 1205 Karl Ct., Suite 108, Wauconda, IL 60084 Phone: 847-469-8630 Fax: 847-469-8918 www.t-maklabs.com Section 1: Basic Information Re: S-7351 (S-7339) Date of Report: November 06, 2015

More information

BENTOMAT CL GEOSYNTHETIC CLAY LINER SPECIFICATION GUIDELINES

BENTOMAT CL GEOSYNTHETIC CLAY LINER SPECIFICATION GUIDELINES BENTOMAT CL GEOSYNTHETIC CLAY LINER SPECIFICATION GUIDELINES This specification is intended for use as a GENERAL GUIDELINE for developing a specification for a specific project. It is NOT intended as a

More information

Tetra Pak Aseptic Package Integrity. Mike Bolstridge Director Product Quality and Safety IFTPS March 2012

Tetra Pak Aseptic Package Integrity. Mike Bolstridge Director Product Quality and Safety IFTPS March 2012 Tetra Pak Aseptic Package Integrity Mike Bolstridge Director Product Quality and Safety IFTPS March 2012 Aseptic Packaging Definition: Hermetically sealed to prevent re-infection Tetra Brik Aseptic 1.

More information

Sandwich panel SPA Product description

Sandwich panel SPA Product description Sandwich panel SPA Product description Ruukki offers a sandwich panel system that combines an attractive appearance with excellent thermal insulation and fire-resistance. The panels are of a lightweight,

More information

PERFORMANCE SPECIFICATION PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIR PARTS

PERFORMANCE SPECIFICATION PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIR PARTS INCH-POUND MIL-PRF-23199F (SH) 30 April 2012 SUPERSEDING MIL-P-23199E (SH) 28 February 1997 PERFORMANCE SPECIFICATION PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIR

More information

Luka Quality Assurance Manual (Eng)

Luka Quality Assurance Manual (Eng) Luka Quality Assurance Manual (Eng) Contents: 1 General... 3 1.01 Foreword... 3 2. Quality assurance standards for air ducts... 4 A.1.00 Rectangular galvanised steel ducts... 4 A.2.00 Embedded galvanised

More information

Guidelines for shelf ready packaging Coop Norden. Dry Goods

Guidelines for shelf ready packaging Coop Norden. Dry Goods Guidelines for shelf ready packaging Coop Norden Dry Goods For standard range product presentations on shelves and on pallets as well as campaign presentations of standard range products on pallets or

More information

SHEET METAL ROOF TEST REPORT

SHEET METAL ROOF TEST REPORT SHEET METAL ROOF TEST REPORT Introduction The time tested performance of the double lock standing seam and batten seam metal roofing is demonstrated by thousands of squares successfully installed by SMACNA

More information

REPORT HOLDER: R.L. ADAMS PLASTICS, INC CROSSROADS COMMERCE PARKWAY WYOMING, MICHIGAN EVALUATION SUBJECT: POLYCORE BRAND INSULATION

REPORT HOLDER: R.L. ADAMS PLASTICS, INC CROSSROADS COMMERCE PARKWAY WYOMING, MICHIGAN EVALUATION SUBJECT: POLYCORE BRAND INSULATION 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3914 Reissued 10/2017 This report is subject to renewal 10/2018. DIVISION: 07 00

More information

Our bags are manufactured from sealable materials and are designed to provide the maximum protection for your products: Gastight Water vapor barrier

Our bags are manufactured from sealable materials and are designed to provide the maximum protection for your products: Gastight Water vapor barrier Bags Customized packaging bags There s no getting around the fact that the commercial success of your products is largely dependent on their being impeccably packaged. Packaging preserves the product s

More information

Perfect technology with design. Hoesch Sectional door elements

Perfect technology with design. Hoesch Sectional door elements Perfect technology with design Hoesch Sectional door elements hoesch sectional door elements content 2 for more than three decades, thyssenkrupp Bausysteme has been one of the market leaders in cutting-edge

More information

Insulated Roof & Wall Panels Solutions. Product Data Sheet. Topdek Single Ply Insulated Roof Deck KS1000 TD

Insulated Roof & Wall Panels Solutions. Product Data Sheet. Topdek Single Ply Insulated Roof Deck KS1000 TD Insulated Roof & Wall Panels Solutions Single Ply Insulated Roof Deck KS1000 TD Applications The KS1000 TD is a single component, factory pre-engineered roof deck, comprising a high performance single-ply

More information

Cold Work Cladding Fabrication & Application

Cold Work Cladding Fabrication & Application TRADE OF Industrial Insulation PHASE 2 Module 3 Substructures, Advanced Cold Work and Cladding UNIT: 4 Cold Work Cladding Fabrication & Application Produced by In cooperation with subject matter expert:

More information

DIVISION 10 SPECIALTIES SECTION OPERABLE PARTITIONS

DIVISION 10 SPECIALTIES SECTION OPERABLE PARTITIONS DIVISION 10 SPECIALTIES SECTION 10 22 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Product Data Sheet. QuadCore Karrier. Applications

Product Data Sheet. QuadCore Karrier. Applications Applications The Quad Karrier system is face fixed, provides the support, thermal and weathering functions to the Benchmark facades. The panel can be laid horizontally or vertically. Suitable for all building

More information

EXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD

EXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.1 DESCRIPTION This section specifies installation and finishing of gypsum board. 1.2 RELATED WORK A. Installation of steel framing members for walls, partitions,

More information

K-FLEX K-FONIK INDUSTRIAL

K-FLEX K-FONIK INDUSTRIAL J a n u a r y 2 0 1 3 K-FLEX K-FONIK INDUSTRIAL Sound & Thermal Insulation design compliant with ISO 15665 www.kflexenergy.com Flexible Elastomeric Foam layer INSULATING PIPING WITH K-FLEX SHEETS > FIRST

More information

PSI Anti-Corrosion Tapes

PSI Anti-Corrosion Tapes Pipeline Accessories PSI Anti-Corrosion Tapes General Information Technical Data Requirement Specifications Application Instructions Certificates 1 The Systems PSI anti-corrosion tapes have been specially

More information

GLT GIRDER LONGITUDINALLY TENSILETESTED

GLT GIRDER LONGITUDINALLY TENSILETESTED GLT GIRDER LONGITUDINALLY TENSILETESTED THE INDIVIDUALLY TESTED SAFETY GUARANTOR. 01 AT A GLANCE AREAS OF APPLICATION Construction and industrial buildings Multi-storey residential buildings Single and

More information

ZINC. Product Data Sheet

ZINC. Product Data Sheet ZINC Benchmark Zinc system is available in two different cassette options in a range of finishes and is installed onto a specifically designed Benchmark. Images above courtesy of VMZinc FAÇADE DATA Materials

More information

HALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE

HALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE HALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE Translation of the General Certificate of Approval Approval Office: German Institute for Construction Engineering (Deutsches Institut für Bautechnik DIBt) Kolonnenstrasse

More information

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100) ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society

More information

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: 3A COMPOSITES USA INC.

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: 3A COMPOSITES USA INC. 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1114 Reissued 09/2017 This report is subject to renewal 09/2019. DIVISION: 07 00

More information

DINAK Camiño do Laranxo, , VIGO (SPAIN) DIFLUX POLYPOPRYLENE. TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD

DINAK Camiño do Laranxo, , VIGO (SPAIN) DIFLUX POLYPOPRYLENE. TÜV Industrie Service GmbH TÜV SÜD Gruppe 0036 CPD Rev.2 DECLARATION OF CONFORMITY AND PRODUCT DESCRIPTION 14471 Chimneys - System chimneys with plastic flue liners - Requirements and test methods Manufacturer: Product commercial name: Product description:

More information

Insulated Ruggedized Transport Container - Model Number - SC-20

Insulated Ruggedized Transport Container - Model Number - SC-20 Introduction The purpose of this document is to emphasise the product benefits of the Ruggedized Insulated Transport Container, Model SC-20, manufactured by Dometic S.àr.l. in Hosingen, Luxembourg. Our

More information

Colour and Additive Preparations. for Extruded Polyolefin Foams

Colour and Additive Preparations. for Extruded Polyolefin Foams Colour and Additive Preparations for Extruded Polyolefin Foams COLOUR AND ADDITIVE PREPARATION FOR EXTRUDED POLYOLEFIN FOAMS ADDITIVES for POLYOLEFIN FOAM HP 73940 FR Flame retardant masterbatch for LDPE-films,

More information

Elcometer 118/2. Moisture Meter. Operating Instructions

Elcometer 118/2. Moisture Meter. Operating Instructions Elcometer 118/2 English Moisture Meter Operating Instructions English The Elcometer 118/2 Moisture Meter has been tested in accordance with EU regulations governing Electro-magnetic compliance and it meets

More information

Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour

Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour GLUING AND RIVETING Sikaflex 221, black Elastic Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour connecting and overlapping joints, apron panels, trims, floor assemblies

More information

STAND009 STANDARD FOR OPTIMIZATION OF CONSUMER UNIT, D-PACK. Version 3.0. March 12. th SUPPLY CHAIN GETS MORE EFFICIENT

STAND009 STANDARD FOR OPTIMIZATION OF CONSUMER UNIT, D-PACK. Version 3.0. March 12. th SUPPLY CHAIN GETS MORE EFFICIENT STANDARD FOR OPTIMIZATION OF CONSUMER UNIT, D-PACK (TRADING UNIT) AND PALLET IN THE NORWEGIAN GROCERY SECTOR Version 3.0 March 12. th. 2015 BY LIVING UP TO AT ALL LEVELS OF PACKAGING SUPPLY CHAIN GETS

More information

Surface Protection Systems

Surface Protection Systems Surface Protection Systems Industrial Corrosion Protection Applications Technology Bekaplast Bolted Lining 8408SKCe2c.indd 2 11.04.2012 17:13:54 Description of the System Bekaplast Bolted Lining is a thermoplastic

More information