Strong-Seal Sealant Specification, a permanent method of sealing the interior of the chimney and casting in manholes and catch basins.

Size: px
Start display at page:

Download "Strong-Seal Sealant Specification, a permanent method of sealing the interior of the chimney and casting in manholes and catch basins."

Transcription

1 Strong-Seal Sealant Specification, a permanent method of sealing the interior of the chimney and casting in manholes and catch basins. Intent: A method of providing corrosion protection and a flexible seal to prevent infiltration through the interior of the manhole frame and chimney area of the manhole. PART 1.0 General 1.1 The specification shall govern all work, materials, and equipment required for the purpose of eliminating infiltration, and corrosion protection of the interior of the manhole frame and chimney area of the manhole. 1.2 Described are procedures for cleaning, preparation, and application of Strong- Seal Sealant. The applicator, approved and trained by Strong-Seal Systems shall furnish all labor, equipment and materials for applying Strong-Seal Sealant to form an interior flexible seal between the manhole frame and chimney area of the manhole or catch basin to provide corrosion protection and eliminate infiltration. A. The removal of any loose and unsound material. B. Cleaning of the area to being sealed. C. The elimination of active infiltration prior to sealing. D. The repair and filling of voids. E. The application of Strong-Seal Sealant. PART 2.0 MATERIALS 2.1 PATCHING MATERIAL (Strong-Seal QSR) Strong-Seal QSR, a quick setting corrosion resistant cementitious material, shall be used as a patching material to provide a smooth surface on concrete, masonry, or brick structures for a uniform application of Strong Seal Sealant. Strong Seal QSR is to be mixed and hand applied according to Strong-Seal Systems recommendations and shall have the following minimum requirements: A. Compressive Strength ASTM C psi, 6 hours B. Bond ASTM C882 >1600 psi, 28 days C. Calcium Aluminate Cement sulfate resistant D. Applied Density 105 pcf + 5 lbs E. Shrinkage ASTM C490 R.H. F. Placement Time 5-10 Minutes G. Set Time Minutes Page 1 of 5, Rev

2 2.2 INFILTRATION CONTROL MATERIAL (Strong-Seal Strong- Plug ) Strong-Plug, a rapid setting cementitious product specifically formulated for leak control, shall be used to stop minor water infiltration and shall be mixed and applied according to Strong-Seal Systems recommendations and shall have the following minimum requirements: A. Compressive Strength ASTM C109 >400 psi, 1 hour>1000 psi, 24 hours B. Sulfate Resistance ASTM C267 No weight loss after ppm C. Freeze/Thaw ASTM C cycles Method A D. Pull Out Strength ASTM C234 14,000 pounds E. Placement time <1.0 minute PART 3.0 APPLICATIONS 3.1 New Structures Standard Portland cement or new concrete (not quick set high strength cement) must be well cured prior to the application of the Strong-Seal Sealant protective coating. Generally, 28 days is adequate cure time for standard Portland cement. If earlier application is desired, contact Strong-Seal Systems for recommendations Contact Strong-Seal Systems for application recommendations if the structure contains a quick setting high strength concrete with latex or curing compound additives Contact Strong-Seal Systems for application recommendations if the structure has been coated. 3.2 Surface Preparation (chimney) Applicator shall inspect all surfaces specified to receive the Strong- Seal Sealant prior to application. Applicator shall notify owner of any noticeable disparity in the surfaces, which may interfere with the proper application of Strong-Seal Sealant Place cover over bench and invert. Plug all pipe openings and plug to prevent extraneous material from entering the sanitary sewer system Remove all form release agents, curing compounds, salts, efflorescence, laitance, and other foreign matter by sandblasting, shot blasting, mechanical scarification, (such as grinding) or suitable chemical means. Page 2 of 5, Rev

3 3.2.4 Active leaks shall be stopped using quick setting, specially formulated mix, Strong-Seal Strong Plug (2.2) according to Strong-Seal Systems recommendations Openings or gaps larger than 1/8 inch shall be patched using specially formulated mix Strong-Seal QSR (2.1) according to Strong-Seal Systems recommendations Check ph of structural liner surfaces prior to application of Strong Seal Sealant. Rinse thoroughly to achieve a final ph between 8.0 and Allow to dry thoroughly prior to coating Surface must be clean, dry, sound and offer sufficient profile to achieve optimum adhesion. 3.3 Surface Preparation (manhole frame) Place cover over bench, invert and plug all pipe openings to prevent extraneous material from entering the sanitary sewer system Remove all oil and grease from surface by shot blasting, mechanical scarification (grinding) or suitable chemical means to produce a near white surface Surface must be clean, dry, and sound with a near white metal finish prior to applying Strong-Seal Sealant. 3.4 Existing Structures Brick Constructed manholes Follow procedures in Using quick set cement, Strong-Seal QSR (2.1) profile the brick chimney down to a minimum of 8 inches below the manhole frame, to provide a smooth surface that is relatively flush with manhole ring The manhole frame shall be blasted using water blasting, sandblasting or mechanical scarification (grinding) to a near white finish. 3.5 Rehabilitated manholes Follow procedures in 3.2 Page 3 of 5, Rev

4 PART 4.0 APPLICATION OF STRONG-SEAL SEALANT 4.1 Strong-Seal Sealant Physical Properties A. ASTM D4060 Abrasion Resistance 1000 Cycles CS-17 5mg less B. ASTM D4541 Adhesion >350 PSI C. ASTM D2240 Durometer hardness Shore D-50 D. ASTM D624 Tear Strength 525 psi E. ASTM D638 Tensile Elongation 530 % F. ASTM D638 Tensile Strength >2400 psi G. ASTM D570 Water Absorption <0.0% H. ASTM C666 Freeze/Thaw 100 cycles no visible damage Temp. Service Range -20 F to 250 F 4.2 Application Application procedures shall conform to the recommendations of Strong Seal Systems including material handling, mixing, safety, spray equipment and environmental controls during application Applicator shall inspect all surfaces specified to receive the sealant prior to application. Applicator shall notify owner of any noticeable disparity in the surfaces, which may interfere with the proper application of Strong- Seal Sealant Using the specified plural component air powered gun, apply the Strong- Seal Sealant 2 up onto the interior of the frame to 4 below the frame onto the interior of the manhole chimney The final thickness shall be a minimum of 125 mils (one cartridge kit will do one 24 diameter interior) Strong-Seal Sealant will dry to touch in approximately 30 minutes. Manhole cover may be replaced immediately. Withhold traffic for 2 hours after installation is complete. PART 5.0 LIMITED WARRANTY The Strong Company, Inc. warrants that this product was produced in conformity with its standard specification or formulations within recognized tolerances, free of adulteration or contamination, and that the product will perform in accordance with representations in Strong-Seal Systems literature and Technical Data Sheets when properly applied in strict conformance with the printed instructions on container and prescribed in technical data instructions and when applied to a properly prepared surface by certified applicators for a period of one (1) year. Page 4 of 5, Rev

5 The sole remedy of the purchaser shall be replacement of the product or refund of the purchase price of the product if any defect in material or workmanship or variance in the product beyond recognized tolerances in the specifications are found to exist. No other remedy including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss shall be available to the purchaser. DISCLAIMER THE WARRANTY DESCRIBED IN THE ABOVE PARAGRAPHS SHALL BE IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF 4505 Emmett Sanders Road Pine Bluff, AR (870) Fax (870) website: info@strongseal.com (Operating as Strong-Seal Systems Corp. in the states of AL, MN & TX) Page 5 of 5, Rev

MS-2A LINER SPECIFICATIONS: for STRUCTURAL REPAIR and SEALING of MANHOLES

MS-2A LINER SPECIFICATIONS: for STRUCTURAL REPAIR and SEALING of MANHOLES MS-2A LINER SPECIFICATIONS: for STRUCTURAL REPAIR and SEALING of MANHOLES INTENT: To provide a system for reconstruction of concrete or masonry structures to stop inflow, infiltration, exfiltration, and

More information

SECTION 806 MANHOLE REHABILITATION

SECTION 806 MANHOLE REHABILITATION SECTION 806 MANHOLE REHABILITATION 806-1 DESCRIPTION: This specification consists of all work, materials, labor and equipment required for manhole rehabilitation for the purpose of eliminating infiltration

More information

A. ASTM C 150 Standard Specification for Portland Cement. B. ASTM C 595 Standard Specification for Blended Hydraulic Cements.

A. ASTM C 150 Standard Specification for Portland Cement. B. ASTM C 595 Standard Specification for Blended Hydraulic Cements. TECHNICAL SPECIFICATIONS SEWER MANHOLE REHABILITATION SYSTEM WITH A PROTECTIVE CEMENT LINER AND HIGH BUILD EPOXY COATING (As Provided by Standard Cement Materials) FOREWORD The following specification

More information

SUGGESTED MANHOLE FRAME SEALING SPECIFICATION (Rehabilitation)

SUGGESTED MANHOLE FRAME SEALING SPECIFICATION (Rehabilitation) PART 1 GENERAL SUGGESTED MANHOLE FRAME SEALING SPECIFICATION (Rehabilitation) 1.01 SCOPE This specification includes the materials and procedures required for the internal sealing of the frame-chimney

More information

FOREWORD PART 1 - GENERAL

FOREWORD PART 1 - GENERAL TECHNICAL REQUIREMENTS AND SPECIFICATIONS REHABILITATION OF CONCRETE, METAL AND MASONRY STRUCTURES WITH A PROTECTIVE LINING FOR STRUCTURAL OR CORROSION PROTECTION FOREWORD This specification covers work,

More information

Broadcast Parking Garage System

Broadcast Parking Garage System AIA Specification Part 1 General Broadcast Parking Garage System 1.01 Work Included A. All work to be provided in this section shall include material, labor, and equipment necessary to furnish the complete

More information

Florock Seamless Flooring Systems

Florock Seamless Flooring Systems Architectural Specification FloroCrete RT Rake/Trowel Urethane Mortar 3/16-1/4 (4.5-6.0 mm) Floor Resurfacing System Part 1: General 1.01 System Description A. System I Skid-Resistant Finish Resurfacing

More information

SECTION MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS

SECTION MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS SECTION 09699 MOISTURE RESISTANT/WATER-PROOF FLOORING ADHESIVE FOR CONCRETE SLABS PART 1 GENERAL 1.1 SECTION INCLUDES A. Testing and application of systems for the reduction of moisture resistant or water-proof

More information

STRUCTURAL CEMENTITIOUS LINER PERMACAST BY AP/M PERMAFORM

STRUCTURAL CEMENTITIOUS LINER PERMACAST BY AP/M PERMAFORM STRUCTURAL CEMENTITIOUS LINER PERMACAST BY AP/M PERMAFORM 1 Intent: It is the intent of this specification to provide minimum standards for materials and methods for waterproofing, sealing, structural

More information

KOSTER AMERICAN CORPORATION

KOSTER AMERICAN CORPORATION Section 09699 PART 1 GENERAL Water Vapor Emission Control Systems 1.1 RELATED DOCUMENTS A. Drawings, documents, and general provisions of the Contract, including, but not necessarily limited to, General

More information

CEMENTITIOUS CRYSTALLIZING WATERPROOFING PART 1 GENERAL

CEMENTITIOUS CRYSTALLIZING WATERPROOFING PART 1 GENERAL CEMENTITIOUS CRYSTALLIZING WATERPROOFING PART 1 GENERAL 1.1 SECTION INCLUDES A. Cementitious crystallizing waterproofing for interior/exterior walls and floor slabs with nonactive leaks. B. Cementitious

More information

***********************************************************************************

*********************************************************************************** AQUAFIN-2K/M Two-Component Cement-based Acrylic-based Waterproofing GUIDE AQUAFIN, Inc. SPECIFICATION PART 1 - GENERAL 1.1 SECTION INCLUDES SECTION 07 16 14 ACRYLIC MODIFIED (FLEXIBLE) CEMENTITIOUS WATERPROOFING

More information

CC-1004 Ultra High Temperature Epoxy Adhesive

CC-1004 Ultra High Temperature Epoxy Adhesive CC-1004 Ultra High Temperature Epoxy Adhesive PRODUCT DESCRIPTION TYPICAL USES Blome CC-1004 is a two part, high temperature, epoxy adhesive used for the installation of abrasion resistant brick and tile

More information

SECTION EPOXY TERRAZZO

SECTION EPOXY TERRAZZO SECTION 09402 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to

More information

Application Guidelines

Application Guidelines Technical Bulletin MANUFACTURER Raven Lining Systems 13105 E. 61 st Street, Suite A Broken Arrow, OK 74012 (918) 615-0020 DESCRIPTION Application Guidelines DESCRIPTION Raven Lining Systems offers several

More information

Applications (As provided by Avanti International)

Applications (As provided by Avanti International) Applications (As provided by Avanti International) The information contained in the document is property of Avanti International. Avanti offers the following verbiage as a technical reference to assist

More information

Protective Coatings for Underground Utility Concrete Structures. By: John E. Davis Inside Sales & Marketing Specialist: Sauereisen, Inc.

Protective Coatings for Underground Utility Concrete Structures. By: John E. Davis Inside Sales & Marketing Specialist: Sauereisen, Inc. Protective Coatings for Underground Utility Concrete Structures By: John E. Davis Inside Sales & Marketing Specialist: Sauereisen, Inc. As our cities and municipalities grow older, the utility and wastewater

More information

SECTION XXXXX CHEMICAL GROUTING

SECTION XXXXX CHEMICAL GROUTING SECTION XXXXX CHEMICAL GROUTING PART 1 -- GENERAL 1.01 SCOPE OF WORK A. Provide all labor, materials, accessories, equipment, and tools required for the rehabilitation, infiltration reduction, and root

More information

Custom Polishing Systems

Custom Polishing Systems Custom Polishing Systems VitraFlor by Bomanite Guideline Specification Standard Application PART 1 GENERAL SECTION 033000 CAST-IN-PLACE CONCRETE 1.1 RELATED DOCUMENTS A. Drawings and general provisions

More information

A. Section includes hydraulic-cement-based, polymer-modified, self-leveling underlayment for application below interior floor coverings.

A. Section includes hydraulic-cement-based, polymer-modified, self-leveling underlayment for application below interior floor coverings. SECTION 03 54 16 - HYDRAULIC CEMENT UNDERLAYMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

prospec.com Concrete Repair & Restoration

prospec.com Concrete Repair & Restoration prospec.com Concrete Repair & Restoration Table of Contents Product Portfolio 3 Product Enhancements 4 Product Selection Matrices 5 Construction Grout & Precast Non-shrink grouts C-1107 Construction Grout

More information

Pacific Polymers Elasto-Deck BT Guide Specification

Pacific Polymers Elasto-Deck BT Guide Specification 1 07141-1 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141 FLUID APPLIED WATERPROOFING 2 07141-2 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141

More information

OVERKOTE E-100 Epoxy Floor Coating Technical Data

OVERKOTE E-100 Epoxy Floor Coating Technical Data OVERKOTE E-100 Epoxy Floor Coating Technical Data PRODUCT DESCRIPTION OVERKOTE E-100 is a floor coating system applied at a thickness of 16 to 50 mils. It is designed for long term protection of concrete

More information

TECHNICAL SPECIAL PROVISION FOR CONCRETE REPAIRS. Financial Project ID , &

TECHNICAL SPECIAL PROVISION FOR CONCRETE REPAIRS. Financial Project ID , & TECHNICAL SPECIAL PROVISION FOR CONCRETE REPAIRS Financial Project ID 429140-1-52-01, 429140-2-52-01 & 428267-1-52-01 The official record of this Technical Special Provision is the electronic file signed

More information

SECTION CAST-IN-PLACE CONCRETE

SECTION CAST-IN-PLACE CONCRETE SECTION 03300 CAST-IN-PLACE CONCRETE PART 1 GENERAL 1.01 SECTION INCLUDES A. The Contractor shall furnish all work and materials, including cement, sand and coarse aggregate, water, admixtures, curing

More information

SECTION UTILITY MANHOLES AND STRUCTURES

SECTION UTILITY MANHOLES AND STRUCTURES SECTION 33 05 14 UTILITY MANHOLES AND STRUCTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Precast reinforced concrete manholes and structures with tongue-and-groove joints with masonry transition

More information

CSI SECTION MAINTENANCE OF CONCRETE Repair & Resurfacing with Rapid Hardening, High Strength, Low-Shrink, Non-Metallic Cementitious Materials

CSI SECTION MAINTENANCE OF CONCRETE Repair & Resurfacing with Rapid Hardening, High Strength, Low-Shrink, Non-Metallic Cementitious Materials CSI SECTION 03 01 00 MAINTENANCE OF CONCRETE Repair & Resurfacing with Rapid Hardening, High Strength, Low-Shrink, Non-Metallic Cementitious Materials EDITOR NOTE: The following guideline specification

More information

CELCORE CELLULAR INSULATING CONCRETE SPECIFICATION FOR RETROFIT PLACEMENT OVER EXISTING ROOF MEMBRANES

CELCORE CELLULAR INSULATING CONCRETE SPECIFICATION FOR RETROFIT PLACEMENT OVER EXISTING ROOF MEMBRANES PART 1: SCOPE CELCORE CELLULAR INSULATING CONCRETE SPECIFICATION FOR RETROFIT PLACEMENT OVER EXISTING ROOF MEMBRANES 1.1 An Approved Celcore Applicator shall furnish all labor, materials and supervision

More information

for Mortar-Set Concrete Tiling Installations

for Mortar-Set Concrete Tiling Installations The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Mortar-Set Concrete Tiling Installations Large Scale CalArc Pavers are part of the California Architectural

More information

Extreme Sealing Tape

Extreme Sealing Tape Extreme Sealing Tape Technical Data September, 2014 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

POLYMER CONCRETE 100 EPOXY POLYMER CONCRETE DILUTE ACIDS RESISTANCE

POLYMER CONCRETE 100 EPOXY POLYMER CONCRETE DILUTE ACIDS RESISTANCE RECOMMENDED APPLICATIONS Polymer Concrete 100 is a three-component, epoxy polymer concrete used for the construction of chemical resistant floors, pads, curbing, trenches and sumps. Polymer Concrete 100

More information

Guideline Specification ACRYMAX ARS-1-C Reinforced Composite Elastomeric Membrane System for Concrete Roofs Fluid-Applied Roofing

Guideline Specification ACRYMAX ARS-1-C Reinforced Composite Elastomeric Membrane System for Concrete Roofs Fluid-Applied Roofing 221 Brooke Street Media, PA 19063 610-566-7470 Fax 610-891-0834 Website www.acrymax.com e-mail info@acrymax.com This document is intended to provide guidelines for the proper specification and application

More information

FIVE STAR PRODUCTS, INC. (800)

FIVE STAR PRODUCTS, INC.  (800) FIVE STAR PRODUCTS, INC. www.fivestarproducts.com (800) 243-2206 Page 1 of 11 DESIGN-A-SPEC GUIDELINES FIVE STAR RS ANCHOR GEL CONTENTS PART A - GENERAL CONDITIONS PART B - MATERIAL SPECIFICATIONS PART

More information

3 700-Series Hybrid Products:

3 700-Series Hybrid Products: 3 700-Series Hybrid Products: 3M 3M 3M Technical Data December, 2009 Product Description 3M 700-Series Hybrid Sealant and Hybrid Adhesive Sealant products are one component, moisture curing products which

More information

Dual Purpose. Sustainable. Sound Attenuation

Dual Purpose. Sustainable. Sound Attenuation Wabo SafetyGuard Parking Series Heavy Duty Expansion Control and Traffic Calming System Molded panels manufactured using 100% post-consumer passenger and truck tires Features Benefits Dual Purpose Sustainable

More information

BAYFILTER SPECIFICATIONS

BAYFILTER SPECIFICATIONS PART 1.00 GENERAL 1.1 DESCRIPTION BAYFILTER SPECIFICATIONS A. The BayFilter system s internal components manufacturer selected by the Contractor and approved by the Engineer, shall furnish all labor, materials,

More information

PREPARATION IS THE KEY TO SUCCESSFUL FLOOR COATINGS By Bob Cusumano

PREPARATION IS THE KEY TO SUCCESSFUL FLOOR COATINGS By Bob Cusumano PREPARATION IS THE KEY TO SUCCESSFUL FLOOR COATINGS By Bob Cusumano Coating new concrete floors can really be tough. Whether you re painting the floor of a large warehouse or the garage in a home, there

More information

Sample Bid Specification Revision 2 PVC Expanded-in-Place Pipeline Reconstruction

Sample Bid Specification Revision 2 PVC Expanded-in-Place Pipeline Reconstruction Sample Bid Specification Revision 2 PVC Expanded-in-Place Pipeline Reconstruction 1.00 DESCRIPTION 1.01 WORK INCLUDED: This work shall include the furnishing of all labor, equipment and materials necessary

More information

Product Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages

Product Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages

More information

MANHOLES, VAULTS AND CATCH BASINS SECTION A. Section Soil and Aggregate Materials. C. Section Storm Drainage Systems

MANHOLES, VAULTS AND CATCH BASINS SECTION A. Section Soil and Aggregate Materials. C. Section Storm Drainage Systems SECTION 02607-1 1.0 GENERAL 1.1 SCOPE: A. This section covers the work necessary for the construction of sanitary and storm system manholes, catch basins, and miscellaneous concrete structures complete.

More information

By CTS Cement Manufacturing Corp.

By CTS Cement Manufacturing Corp. CSI SECTION 03 60 00 GROUTING 03 62 00 NON-SHRINK GROUTING 03 62 13 NON-METALLIC NON-SHRINK GROUTING High Flow, Non-Metallic, Multi-Purpose, Cementitious, Non-Shrink Grout EDITOR NOTE: The following guideline

More information

RESILIENT FLOORING: Select Step Wood

RESILIENT FLOORING: Select Step Wood 160 S. Industrial Blvd Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Select Step Wood This document is intended as a suggested guide for editing your architectural guide specification. Mohawk Group

More information

Engine Bay Floors Floor Resurfacing 4000

Engine Bay Floors Floor Resurfacing 4000 Engine Bay Floors Floor Resurfacing 4000 P.O. Box 341 Macungie, PA 18062 610.530.7710 800.573.9198 www.enginebayfloors.com 1.1 SUBMITTALS Flooring Specification SECTION 1 GENERAL A. Product Data: Submit

More information

FLUID APPLIED WATERPROOFING

FLUID APPLIED WATERPROOFING SECTION 07120 FLUID APPLIED WATERPROOFING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 09200 - Metal Studs, Metal Lath, Suspension Ceilings, Plaster, and Stucco.

More information

XIAMETER RTV-4250-S Kit Green

XIAMETER RTV-4250-S Kit Green XIAMETER RTV-4250-S Kit Green High strength silicone moldmaking rubber FEATURES Outstanding release properties If required the product cure can be heat accelerated Fast thick section cure at room temperature

More information

TILE TILE

TILE TILE 09300 - TILE 09300-1 PART ONE: GENERAL 1.1 Description TILE 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance with the requirements

More information

CONNOR Control XT Page 1

CONNOR Control XT Page 1 CONNOR Control XT Page 1 SECTION 09624 - SYNTHETIC ATHLETIC FLOORING PART 1 - GENERAL 1.1 DESCRIPTION: A. Scope The complete installation of a prefabricated rubber sports surface including adhesive and

More information

RESILIENT FLOORING: Hot and Heavy - Secoya

RESILIENT FLOORING: Hot and Heavy - Secoya 160 South Industrial Blvd. Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Hot and Heavy - Secoya This document is intended as a suggested guide for editing your architectural guide specification.

More information

3M Fast Tack Water Based Adhesive 1000NF

3M Fast Tack Water Based Adhesive 1000NF Fast Tack Water Based Adhesive Technical Data September 2017 Product Description Key Features 3M Fast Tack Water Based Adhesive is a high performance water-based, one part adhesive formulated for fast

More information

Air and Vapor Barrier 3015

Air and Vapor Barrier 3015 Air and Vapor Barrier 3015 Technical Data March 2017 Product Description 3M Air and Vapor Barrier 3015 is an air, moisture and water impermeable membrane with an aggressive, high-tack acrylic pressure

More information

BIO-AQUIFER STORM SYSTEM

BIO-AQUIFER STORM SYSTEM BIO-AQUIFER STORM SYSTEM Specifications for Construction PART 1 GENERAL 1.01 SECTION INCLUDES A. Providing labor, materials, tools and equipment to furnish and install a permeable concrete paving stone

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy-Shell WB 50 Product Specification GUIDE SPECIFICATION SECTION 09725

More information

May 8, 2017 ADDENDUM #1. IFB Resin Floor System For Highway Department Central District Building

May 8, 2017 ADDENDUM #1. IFB Resin Floor System For Highway Department Central District Building May 8, 2017 ADDENDUM #1 IFB 17-082 Resin Floor System For Highway Department Central District Building Addendum #1 is being issued to offer an alternate resin flooring system. 096700 FLUID-APPLIED FLOORING

More information

SECTION MANHOLES AND STRUCTURES. A. Section Includes: 1. Manholes for water, storm drain and sanitary sewer systems.

SECTION MANHOLES AND STRUCTURES. A. Section Includes: 1. Manholes for water, storm drain and sanitary sewer systems. SECTION 33 05 13 MANHOLES AND STRUCTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Manholes for water, storm drain and sanitary sewer systems. B. Related Sections: 1. Section 03 20 00 - Concrete

More information

3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009

3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009 3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety

More information

TEX COTE 600 TEXTURED COATING MASONRY PROTECTIVE COATING

TEX COTE 600 TEXTURED COATING MASONRY PROTECTIVE COATING SECTION 09960 - TEXTURED COATINGS Coating System Submittals Guide Specification TEX COTE 600 TEXTURED COATING MASONRY PROTECTIVE COATING (SPLIT FACE OR SAND FINISH BLOCK) 1. TEX COTE 600, Textured Coating

More information

PAYING ATTENTION TO DETAIL by Bob Cusumano

PAYING ATTENTION TO DETAIL by Bob Cusumano PAYING ATTENTION TO DETAIL by Bob Cusumano Painting contractors are often required to install caulk or sealant in exterior joints. Too often, the sealant is simply gunned into the joint until it s filled

More information

FLOORING INSTALLATION SYSTEMS. Product Catalog

FLOORING INSTALLATION SYSTEMS. Product Catalog FLOORING INSTALLATION SYSTEMS Product Catalog Custom Building Products is North America s leader in flooring preparation systems. It s easy to say you re an industry leader, but we prove it every day with

More information

Cement Stabilized Soil (CSS) (Portland cement)

Cement Stabilized Soil (CSS) (Portland cement) Cement Stabilized Soil (CSS) (Portland cement) 1.0 DESCRIPTION. This specification shall govern the process known as Cement Stabilized Soil (CSS). CSS consists of mixing the existing base, subbase and

More information

Liquid applied polyurea hybrid membrane

Liquid applied polyurea hybrid membrane Product Data Sheet Edition 07/08/2008 Identification no: 02 06 07 01 001 0 000015 Sikalastic -842 BG Liquid applied polyurea hybrid membrane Product Description Sikalastic -842 BG is a two part, highly

More information

Section COATING RESTORATION

Section COATING RESTORATION Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80658R StoColor Texture - Coarse Textured Acrylic-Based,

More information

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II SECTION 221313 - FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION mil thickness COLD FLUID-APPLIED WATERPROOFING

SECTION mil thickness COLD FLUID-APPLIED WATERPROOFING SECTION 07 14 16 CCW-MIRASEAL @ 120 mil thickness COLD FLUID-APPLIED WATERPROOFING PART 1 - GENERAL 1.1 SECTION INCLUDES: Installation of waterproofing membrane on surfaces indicated on drawings, consisting

More information

B. All work of the section shall comply with the conditions of the contract, the drawings and any special conditions forming a part of the contract.

B. All work of the section shall comply with the conditions of the contract, the drawings and any special conditions forming a part of the contract. SPECIFICATIONS PART ONE - GENERAL ------------------------------------------------------------------------ 1.01 General Description A. The Cementitious capillary waterproofing materials specified herein

More information

SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL

SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL This section covers the furnishing and installation of ductile iron water pipe, fittings, thrust restraint and pipe disinfection. Ductile Iron Pipe MATERIALS

More information

SECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved

SECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved SECTION 08 87 13 WINDOW FILM Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security

More information

HYDRATHANE INTERIOR WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 959 [2017] Appraisal No. 959 (2017) BRANZ Appraisals

HYDRATHANE INTERIOR WATERPROOFING MEMBRANE. Product. Scope. Building Regulations. Appraisal No. 959 [2017] Appraisal No. 959 (2017) BRANZ Appraisals Appraisal No. 959 [2017] HYDRATHANE INTERIOR WATERPROOFING MEMBRANE BRANZ Appraisals Technical Assessments of products for building and construction. Construction Chemicals Pty Ltd 49-57 Davis Street Wingfield

More information

3M Scotchkote Fusion-Bonded Epoxy Coating 6233P

3M Scotchkote Fusion-Bonded Epoxy Coating 6233P 3M Scotchkote Fusion-Bonded Epoxy Coating 6233P Data Sheet July 2015 Handling and Safety Precautions: Read all Health Hazard, Precautionary and First Aid, Material Safety Data Sheet, and/or product label

More information

Dow Corning AllGuard Silicone Elastomeric Coating. Application and Maintenance Guide

Dow Corning AllGuard Silicone Elastomeric Coating. Application and Maintenance Guide Dow Corning AllGuard Silicone Elastomeric Coating Application and Maintenance Guide Contents This document is intended to provide installation and field testing instructions for Dow Corning AllGuard Silicone

More information

Kolorines Glass Mosaic Tiles Project Specification

Kolorines Glass Mosaic Tiles Project Specification Kolorines Glass Mosaic Tiles Project Specification SUGGESTED SPECIFICATION Glass Mosaic Tile Installation for Swimming Pools NOTES TO SPECIFIER: 1. Specify PremiumPlus Thin-Set mixed with CustomFlex Additive

More information

ARDEX GUIDE SPECIFICATION ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment

ARDEX GUIDE SPECIFICATION ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment ARDEX GUIDE SPECIFICATION ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment SECTION 03 01 30 Maintenance of Cast-In-Place Concrete PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,

More information

1. CONCRETE SUBFLOORS.SECTION a. Slab Depression: Equal to thickness of selected flooring (6, 8,10,12,13 or 14mm).

1. CONCRETE SUBFLOORS.SECTION a. Slab Depression: Equal to thickness of selected flooring (6, 8,10,12,13 or 14mm). ProTraxx Specification PART 1 - GENERAL 1.1 DESCRIPTION: A. Scope 1.2 REFERENCES: The complete installation of a prefabricated sheet rubber sports surfacing system including adhesive and game line striping

More information

3-part thixotropic epoxy patching mortar

3-part thixotropic epoxy patching mortar Product Data Sheet Edition 28/08/2006 Identification no: 02 04 02 03 001 0 000044 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages Sikadur -41

More information

PEDA-GARD ALIPHATIC. Pedestrian Traffic Coatings. System Summary

PEDA-GARD ALIPHATIC. Pedestrian Traffic Coatings. System Summary PEDA-GARD ALIPHATIC Pedestrian Traffic Coatings DESCRIPTION System Summary Peda-Gard Aliphatic is comprised of a single component aromatic polyurethane base coat, single component aromatic polyurethane

More information

SIDER-POOL. Product Data. Features and Uses

SIDER-POOL. Product Data. Features and Uses 153 Regur Road Hawkinsville, GA 31036 USA 1.478.892.9800 888-743-3750 sales@sider-crete.com www.sider-crete.com Product Data Features and Uses A true cement-based plaster No-check cracking and no-brushing

More information

4411N 4411G 4412N 4412G

4411N 4411G 4412N 4412G Extreme Sealing Tape Technical Data October, 2011 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.

More information

CITY OF FARGO SPECIFICATIONS PIPE AND MANHOLE REHABILITATION

CITY OF FARGO SPECIFICATIONS PIPE AND MANHOLE REHABILITATION PIPE AND MANHOLE REHABILITATION PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans shall include all labor, materials, and equipment necessary

More information

FIVE STAR PRODUCTS, INC.

FIVE STAR PRODUCTS, INC. FIVE STAR PRODUCTS, INC. www.fivestarproducts.com 1-800-243-2206 (in the US) +1 203-336-7900 (outside US) Page 1 of 8 DESIGN-A-SPEC GUIDELINES FIVE STAR CENTRI-CAST PIPE REPAIR MORTAR FIVE STAR CENTRI-CAST

More information

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017 SECTION 02630 - STORM DRAINAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

Waterproofing and Damp-proofing Cementitious Slurry

Waterproofing and Damp-proofing Cementitious Slurry Product Data Sheet Edition: 01/10/2012 Identification no. Version no: GCC SikaTop Seal-107 SikaTop Seal-107 Waterproofing and Damp-proofing Cementitious Slurry Product Description Uses SikaTop Seal-107

More information

B-500 / B-600 SERIES

B-500 / B-600 SERIES B-500 / B-600 SERIES VAPOR VENT TRANSITION INSTALLATION GUIDE SINGLE WALL VENT TRANSITION SUMPS B-500 VENT TRANSITION SINGLEWALL SERIES SHOWN WITH WATERSPLASH LID, AND SUPPORT FOR 5 VENT LINES. B-500 SINGLEWALL

More information

SUPER-KRETE SPECIFICATION S-1 EXISTING CONCRETE SURFACE PREPARATION SECTIONS ; /19; ;

SUPER-KRETE SPECIFICATION S-1 EXISTING CONCRETE SURFACE PREPARATION SECTIONS ; /19; ; SUPER-KRETE SPECIFICATION S-1 EXISTING CONCRETE SURFACE PREPARATION SECTIONS 01 71 16; 02 25 16/19; 03 01 30; 0716 16 SUPER-KRETE International, Inc. This product guide specification is written according

More information

PRODUCT GUIDE SPECIFICATION

PRODUCT GUIDE SPECIFICATION PRODUCT GUIDE SPECIFICATION Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,

More information

Steel Rehabilitation Resins MIR-940 & MIR-950

Steel Rehabilitation Resins MIR-940 & MIR-950 Steel Rehabilitation Resins MIR-940 & MIR-950 Introduction Mirteq s steel primer and vinyl ester based, micro-fiber reinforced resins have been custom formulated for sealing and refurbishing steel structures,

More information

Fire Protection Products

Fire Protection Products wwww Fire Protection Products Product Data Sheet April / 2017 Product Description Product Features Applications Specifications 3M Fire and Water Barrier Tape is a self-adhered membrane that provides a

More information

A.2.a Random Riprap... Table

A.2.a Random Riprap... Table 3601 RIPRAP MATERIAL 3601.1 SCOPE Provide stone and filter layer material for use in random or hand-placed riprap, gabion, and revet mattress construction. 3601.2 REQUIREMENTS A Stones A.1 Quality Provide

More information

SECTION LATEX-MODIFIED MEDIUM BED MORTAR

SECTION LATEX-MODIFIED MEDIUM BED MORTAR SECTION 09305.24 LATEX-MODIFIED MEDIUM BED MORTAR This product guide specification can be used to specify Hydroment Big Tile & Stone Mortar, a latex-modified, medium bed mortar designed for setting large

More information

San Antonio Water System Standard Specifications for Construction ITEM NO. 850 SANITARY SEWER STRUCTURES

San Antonio Water System Standard Specifications for Construction ITEM NO. 850 SANITARY SEWER STRUCTURES ITEM NO. 850 SANITARY SEWER STRUCTURES 850.1 DESCRIPTION: This item shall govern for the construction or rehabilitation of all concrete sanitary sewer structures other than standard sanitary sewer manholes

More information

Adhesion Promoter/Primer 3M Adhesion Promoter AP596

Adhesion Promoter/Primer 3M Adhesion Promoter AP596 Adhesion Promoter/ 3M Adhesion Promoter AP596 3M All Purpose P591 3M Metal P592 Technical Data October 2017 Product Description 3M Adhesion Promoter AP596 and 3M s P591, P592, and are low viscosity adhesion

More information

Midsun HVIC silicone is not affected by UV light, temperature, corrosive environments, or ATH pitting from dry band arcing.

Midsun HVIC silicone is not affected by UV light, temperature, corrosive environments, or ATH pitting from dry band arcing. Midsun 570 Midsun HVIC silicone is not affected by UV light, temperature, corrosive environments, or ATH pitting from dry band arcing. Because the coating is highly water repellent, contaminant s cannot

More information

SPECIFICATIONS FOR STREET CONSTRUCTION WITHIN THE TOWN OF PLAINVILLE

SPECIFICATIONS FOR STREET CONSTRUCTION WITHIN THE TOWN OF PLAINVILLE SPECIFICATIONS FOR STREET CONSTRUCTION WITHIN THE TOWN OF PLAINVILLE BE IT ORDAINED by the Town Council of the Town of Plainville: SECTION 1. SUBDIVISIONS. All subdivisions hereinafter developed within

More information

Resilient and Wood Floor Covering Flatness Requires High Performance, Cementitious Self-Leveling Underlayment

Resilient and Wood Floor Covering Flatness Requires High Performance, Cementitious Self-Leveling Underlayment Resilient and Wood Floor Covering Flatness Requires High Performance, Cementitious Self-Leveling Underlayment By Steve Taylor Director of Architecture and Technical Marketing, Custom Building Products

More information

1. Cast-in-place concrete is specified in Section

1. Cast-in-place concrete is specified in Section SECTION 03 38 00 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section describes the requirements for furnishing and installing post-tensioned slabs, jacks, jacking and anchors at Parking Structure, and record

More information

Acceptable Floor Substrates: Concrete, cured mortar bed, plywood, and backer board.

Acceptable Floor Substrates: Concrete, cured mortar bed, plywood, and backer board. SECTION 093000 - SHEET MEMBRANE WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used as waterproofing and vapor retarder, in conjunction with tile and dimension stone installations.

More information

SECTION XXXX POLYMER CONCRETE PUMP STATIONS

SECTION XXXX POLYMER CONCRETE PUMP STATIONS SECTION XXXX POLYMER CONCRETE PUMP STATIONS PART 1 GENERAL 1.1 SUMMARY A. This specification shall govern for the furnishing of all work necessary for installation of polymer concrete pump stations to

More information

SECTION RESINOUS FLOORING or SECTION QUARTZ FLOORING

SECTION RESINOUS FLOORING or SECTION QUARTZ FLOORING SECTION 09 67 23 RESINOUS FLOORING or SECTION 09 67 26 QUARTZ FLOORING PART 1 - GENERAL 1.1 SUMMARY (Specification writer shall add, delete or amend, as deemed necessary) A. Provide all labor, materials,

More information

3 Scotch-Weld TM. Epoxy Adhesive DP100 FR. Technical Data July, 2011

3 Scotch-Weld TM. Epoxy Adhesive DP100 FR. Technical Data July, 2011 3 Scotch-Weld TM Technical Data July, 2011 Product Description 3M Scotch-Weld is a two-part flame retardant (self-extinguishing) version of Scotch-Weld DP100. It meets the UL94 V-O Burn Test requirements

More information

SECTION ULTRACOMPACT WALL FINISHES - THIN SET

SECTION ULTRACOMPACT WALL FINISHES - THIN SET PART 1. GENERAL 1.1 SUMMARY A. Section Includes: 1. Quartz interior wall finishes. 2. Setting materials and accessories. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work

More information

CW 3615 RIPRAP TABLE OF CONTENTS

CW 3615 RIPRAP TABLE OF CONTENTS December 2014 SPECIFICATION CW 3615 R4 CW 3615 RIPRAP TABLE OF CONTENTS 1. GENERAL CONDITIONS... 1 3. DESCRIPTION... 1 5. MATERIALS... 1 5.1 General... 1 5.2 Rock... 1 5.3 Random Stone Riprap... 1 5.4

More information