Overview of PSI Technologies Inc. Saskatoon, Saskatchewan, Canada. Presented by: Dr. Curtis Berthelot, P.Eng.
|
|
|
- Jasper McDonald
- 6 years ago
- Views:
Transcription
1 Overview of PSI Technologies Inc. Saskatoon, Saskatchewan, Canada Presented by: Dr. Curtis Berthelot, P.Eng. May 27, 2016
2 PSI TECHNOLOGIES CORPORATE OVERVIEW Founded around Nebraska Kansas Border Incorporated in Saskatoon, SK, Canada in 1998 (18 years) Consulting and construction company Employees a staff of 100 including 10 engineers and 1 geologist major pieces of equipment 5 Primary PSI Divisions: Engineering Services Mining Services Earthworks Construction Aggregates/Trucking Land Development PSI Technologies motto: dedicated to engineering the best solutions for its clients through best practice in science, technology and engineering.
3 WHERE PSI STARTED
4 PSI TECHNOLOGIES CORPORATE COMMITMENT PSI Technologies is dedicated to excellence through innovation. Foundation based on advances in materials science through the use of scientifically sound and pragmatic mechanistic methods. Mission: to assist engineers in the design, analysis, construction, and management of diverse infrastructure. Integration of technical innovation and environmental sustainability is a cornerstone of our company s philosophy. Dedicated to Research & Development. Dedicated to Client specific needs.
5 PSI S CORPORATE COMMITMENT SAFETY Our Commitment to Safety PSI Technologies is committed to creating, maintaining, and promoting a safe and healthy work environment for our workforce and our community. PSI has a comprehensive health and safety program that covers all safety concerns that might arise in our diverse work environment. PSI actively pursues a goal of zero lost-time incidents. The proactive safety culture instilled into PSI s workforce by management is the key to PSI s impeccable safety record. PSI is an interdependent organization that demonstrates commitment and dedication to safety at all levels of our company.
6 PSI S CORPORATE COMMITMENT SUSTAINABILITY Wood Recycling Concrete Recycling Plastic Recycling Asphalt Recycling
7 PSI TECHNOLOGIES SERVICES Engineering Services Aggregate Production Laboratory Testing Earthworks Construction 3D Numerical Modeling Mine Services Structural Asset Management PSI s BUSINESS ADVANTAGE: PSI Technologies offers vertically integrated cost effective full turnkey engineered infrastructure solutions, including materials design, structural design, equipment operation, project management, and quality assurance testing for civil and mining design and construction works.
8 ENGINEERING SERVICES Road Coring & Sampling Geotechnical Borehole Drilling & Logging Materials Testing Project Management
9 LABORATORY TESTING Asphalt Concrete Testing Soils & Aggregate Testing
10 LABORATORY TESTING Mine Backfill Materials HMAC Wheel Tracker Portland Cement Concrete Climatic Durability
11 3D MODELING NONLINEAR MATERIAL PROPERTIES a) Base E (MPa) E (MPa) I1 (kpa) 10 Hz 1 Hz 0.1 Hz Tau_oct (kpa) 10 Hz 1 Hz 0.1 Hz E (MPa) b) Salt - 15% Brine Immediate Test I1 (KPa) Laboratory Nonlinear Model E (MPa) τoct (KPa) Laboratory Nonlinear Model
12 3D MODELING NONLINEAR MATERIAL PROPERTIES 20.0 a) Soil Phase Angle (Frequency Dependency) 20.0 Phase Angle E (MPa) I1 (kpa) Tau_oct (kpa) 10 Hz 1 Hz 0.1 Hz 10Hz 1 Hz 0.1 Hz b) Soil Modulus (Frequency Dependency) E (MPa) I1 (kpa) E (MPa) Tau_oct (kpa) 10 Hz 1 Hz 0.1 Hz 10Hz 1 Hz 0.1 Hz
13 3D MODELING
14 3D MODELING PSIPAVE3D TM
15 3D MODELING SPECIFICATIONS & CLIMATE BY REGION
16 3D MODELING INPUT GEOMETRY & TRUCK LOAD Flow Trough Testing URBAN AND RURAL MULTI LANES TRUCKS LIST NONUNIFORM CONTACT AREA
17 3D MODELING MATERIAL PROPERTIES LINEAR AND NONLINEAR ELASTICITY LINEAR AND NONLINEAR VICOELASTICITY VISCOPLASTICITY AND ELASTOPLASTICITY FRACTURE (COHESIVE ZONES)
18 3D MODELING INPUT GEOMETRY & TRUCK LOAD
19 3D MODELING TIRE FOOTPRINT
20 3D MODELING STRUCTURAL ANALYSIS
21 MODELING EFFECT OF UTILITIES
22 3D MODELING FWD WITH FEM
23 3D MODELING VISUAL OUTPUT COMPARISONS
24 3D MODELING FORENSIC ANALYSIS a) Target Optimum Fill, Wet In Situ c) Wet Average In Situ Condition b) Dry Average In Situ Condition d) Subgrade Wet of Optimum
25 3D ANALYSIS MULTISCALE MODELING Global Scale PATENT #PCT/US2009/ Local Scale Micro Scale International Journal of Pavement Engineering 2015: Multi scale computational model for design of flexible pavement part I: expanding multi scaling Multi scale computational model for design of flexible pavement part II: contracting multi scaling Multi scale computational model for design of flexible pavement part III: two way coupled multi scaling
26 3D MODELING COST MODULE
27 AGGREGATE PRODUCTION Aggregate Delivery Crushed Asphalt Concrete Rubble Plastic Recycling Concrete Recycling
28 EARTHWORKS CONSTRUCTION Foundation Excavation
29 EARTHWORKS CONSTRUCTION Trucking Services Basement Excavation Rail Infrastructure Services Culvert Replacement
30 MINE SERVICES Tailings Processing
31 MINE SERVICES Tailings Processing Backfilling Quality Control Testing Custom Underground Void Filling
32 MINE SERVICES
33 3D MODELING MINE MODELLING & INSTRUMENTATION
34 3D MODELING MINE MODELLING & INSTRUMENTATION
35 ALWAYS MAINTAIN BALANCE
36 FIGURE OUT WHATS IMPORTANT AND MOTIVATES
37 Thank You! Please visit: for more information
Recycled Base Aggregates in Pavement Applications
Recycled Base Aggregates in Pavement Applications Jeffrey S. Melton, Ph.D. Outreach Director, Recycled Materials Resource Center jeffrey.melton@unh.edu The Big Picture Sustainability Nexus of major issues
A Laboratory Technique for Estimating the Resilient Modulus Variation of Unsaturated Soil Specimens from CBR and Unconfined Compression Tests
A Laboratory Technique for Estimating the Resilient Modulus Variation of Unsaturated Soil Specimens from CBR and Unconfined Compression Tests by: Mike Vogrig Adam McDonald Presented to Civil Engineering
An Overview of Low Cost Pavement Alternatives in Canada
An Overview of Low Cost Pavement Alternatives in Canada Venkat Lakkavalli P. Eng., M. Sc. Leader, Pavement Engineering The City of Calgary Alberta, Canada Acknowledgement Acknowledge Authors, Co-authors
TABLE OF CONTENTS. Background of Existing Facility 3. Proposed Work 4
TABLE OF CONTENTS SECTION PAGE Background of Existing Facility 3 Proposed Work 4 Objective of this Report 4 Required Data 4 Pavement Design Procedure 5 Other Data Requirements 7 Pavement Structures 8 Pavement
GREEN ROADS: THE SUSTAINABLE ROAD AHEAD
GREEN ROADS: THE SUSTAINABLE ROAD AHEAD Professor Susan Tighe, PhD, PEng Canada Research Chair Norman W. McLeod Professor Sustainable Pavement Engineering Director Centre for Pavement and Transportation
CONSTRUCTION STANDARDS SECTION CS 3 TRENCH FOUNDATION, BEDDING AND BACKFILL
CONSTRUCTION STANDARDS SECTION CS 3 TRENCH FOUNDATION, BEDDING AND BACKFILL CS 3-01 GENERAL: A. The foundation, bedding and backfill for all trenches shall conform with the requirements of the City Standard
BEST PRACTICE DESIGN FOR CONCRETE PAVERS FOR CANADIAN MUNICIPAL APPLICATIONS
BEST PRACTICE DESIGN FOR CONCRETE PAVERS FOR CANADIAN MUNICIPAL APPLICATIONS David Hein, P.Eng.,* Patrick Leong and Dr. Susan Tighe, P.Eng.** *Applied Research Associates Inc. 5401 Eglinton Avenue West,
Sustainable Pavements. Gina Ahlstrom Senior Pavement Engineer Office of Asset Management, Pavements, and Construction
Sustainable Pavements Gina Ahlstrom Senior Pavement Engineer Office of Asset Management, Pavements, and Construction National Concrete Consortium Jacksonville, FL April 22, 2014 2 FHWA Sustainable Pavements
A. Texas Department Transportation 2004 Standard Specifications for Construction of Highways, Streets and Bridges (TxDOT):
SECTION 31 32 13.16 CEMENT STABILIZATION PART 1 GENERAL 1.1 SCOPE OF WORK A. This Section pertains to the specifications for cement stabilization of sandy or silty soil and consists of pulverizing, addition
Eyad Masad Zachry Department of Civil Engineering Texas A&M University, College Station, TX
Models for Plastic Deformation Based on Non-Linear Response for FEM Implementation Eyad Masad Zachry Department of Civil Engineering Texas A&M University, College Station, TX International Workshop on
Comparison of Airport Paving Specification Requirements in Canada & USA
Comparison of Airport Paving Specification Requirements in Canada & USA Ludomir Uzarowski, Ph.D., P.Eng. Rabiah Rizvi, P.Eng. Golder Associates Ltd., Ontario, Canada Susan Tighe, Ph.D., P.Eng., University
SUDAS Revision Submittal Form
SUDAS Revision Submittal Form Status Date: As of 3/20/2017 Topic: Pavement thickness Manual: Design Manual Location: Section 5F-1 Requested Revision: Reason for Revision: Comments: See attached. Updating
2016 Louisiana Transportation Conference Danny Gierhart, P.E. Regional Engineer Asphalt Institute
A Simplified Pavement Design Tool 2016 Louisiana Transportation Conference Danny Gierhart, P.E. Regional Engineer Asphalt Institute www.pavexpressdesign.com What Is PaveXpress? A free, online tool to help
CIV204 MATERIALS OF CONSTRUCTION (2+2 ECTS 6)
CIV204 MATERIALS OF CONSTRUCTION Aims of the Course (2+2 ECTS 6) To provide students comprehensive information on the basic engineering properties of most common construction materials. To introduce technologies
Comparative Analysis of Pavement Rehabilitation Designs Using AASHTOWare Pavement ME, AASHTO 1993 and Surface Deflection Methods
Comparative Analysis of Rehabilitation Designs Using AASHTOWare ME, AASHTO 1993 and Surface Deflection Methods M. Alauddin Ahammed, Ph.D., P.Eng. Design Engineer Materials Engineering Branch Manitoba Infrastructure
LADOTD Construction Specifications: Parts II, III & IV MARK MORVANT, P.E. ASSOCIATE DIRECTOR, RESEARCH
LADOTD Construction Specifications: Parts II, III & IV MARK MORVANT, P.E. ASSOCIATE DIRECTOR, RESEARCH Presentation Outline General Introduction Part II Site Preparation & Earthwork Part III Base Courses
PERFORMANCE EVALUATION OF CEMENT STABILISED ROAD BASE USING FALLING WEIGHT DEFLECTOMETER
PERFORMANCE EVALUATION OF CEMENT STABILISED ROAD BASE USING FALLING WEIGHT DEFLECTOMETER Gary Chai, Pengurusan Lebuhraya Berhad, Kuala Lumpur Asmaniza Asnan, Projek Lebuhraya Utara-Selatan Berhad, Kuala
Performance of Recycled Rubber Modified Binders in Warm Mix Asphalt Mixtures
Performance of Recycled Rubber Modified Binders in Warm Mix Asphalt Mixtures P. E. Sebaaly 1 E. Y. Hajj 1 E. Hitti 2 1 Pavements/Materials Program, Dept of Civ. & Env. Engineering MS257, University of
USE OF RECYCLED CRUSHED DEMOLITION MATERIALS AS BASE AND SUB-BASE IN ROAD CONSTRUCTION
PROFILE USE OF RECYCLED CRUSHED DEMOLITION MATERIALS AS BASE AND SUB-BASE IN ROAD CONSTRUCTION Colin Leek AIT (Civil) MTech MIE Manager Construction Services City of Canning Western Australia Colin Leek
A THREE DIMENSIONAL STUDY OF THE EFFECT OF SOIL EROSION ON RIGID PIPES
North American Society for Trenchless Technology (NASTT) No-Dig Show 2011 Washington, D.C. March 27-31, 2011 Paper F-1-04 A THREE DIMENSIONAL STUDY OF THE EFFECT OF SOIL EROSION ON RIGID PIPES Sherif Kamel
The Work under this Section consists of performing all operations necessary to complete construction of the leveling course on the prepared subbase.
SECTION 20.22 LEVELING COURSE Article 22.1 General The Work under this Section consists of performing all operations necessary to complete construction of the leveling course on the prepared subbase. Article
Rutting Evaluation of Dense Graded Hot Mix Asphalt Mixture
International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 05 48 Rutting Evaluation of Dense Graded Hot Mix Asphalt Mixture J. Ahmad 1, M.Y. Abdul Rahman 1 and M. R. Hainin 2 1 Institute
Simplified Testing Method for Evaluation of Asphalt Mixtures for their Susceptibility to Permanent Deformation
Simplified Testing Method for Evaluation of Asphalt Mixtures for their Susceptibility to Permanent Deformation R. Garba Center for Road and Traffic Technology, Norwegian Public Roads Administration, Trondheim,
UNDERGROUND MINING. Cementation
Cementation North Bay Salt Lake City Santiago Johannesburg Kalgoorlie Perth UNDERGROUND M OVERVIEW THE MURRAY & ROBERTS GROUP The Underground Mining platform provides specialist engineering, construction
FINAL REPORT EVALUATION OF HYDRAULIC CEMENT CONCRETE OVERLAYS PLACED ON THREE PAVEMENTS IN VIRGINIA. Michael M. Sprinkel, P.E.
FINAL REPORT EVALUATION OF HYDRAULIC CEMENT CONCRETE OVERLAYS PLACED ON THREE PAVEMENTS IN VIRGINIA Michael M. Sprinkel, P.E. Research Manager Celik Ozyildirim, Ph.D. Principal Research Scientist (The
CHAPTER 7 PAVEMENT DESIGN. 1. Gradation (sieve and hydrometer analysis) 3. Moisture density relationships and curves
CHAPTER 7 PAVEMENT DESIGN 7.0 GENERAL The purpose of this chapter is to define the requirements for design of pavement within proposed and existing roadways for new subdivision streets and secondary roads.
GEOTECHNICAL STUDY PROPOSED CONCRETE ROADWAY TIKI ISLAND COMMUNITY GALVESTON COUNTY, TEXAS PROJECT NO E
GEOTECHNICAL STUDY PROPOSED CONCRETE ROADWAY TIKI ISLAND COMMUNITY GALVESTON COUNTY, TEXAS PROJECT NO. 15-945E TO VILLAGE OF TIKI ISLAND TIKI ISLAND, TEXAS BY SERVICING TEXAS, LOUISIANA, NEW MEXICO, OKLAHOMA
Evaluation Plan for Investigation of In- Place Recycling of Asphalt Concrete as Unbound Base Material
November 2004 Evaluation Plan for Investigation of In- Place Recycling of Asphalt Concrete as Unbound Base Material PPRC 2003-2004 Strategic Plan Item 2.4.2 Prepared by Partnered Pavement Research Center
Comparison of geotechnic softwares - Geo FEM, Plaxis, Z-Soil
Comparison of geotechnic softwares - Geo FEM, Plaxis, Z-Soil Comparison du logiciel géotechnique Geo FEM, Plaxis, Z-Soil J. Pruška CTU in Prague FCE Department of Geotechnics, Prague, Czech Republic, Pruska@fsv.cvut.cz
Basics of a Good Rural Road!
Basics of a Good Rural Road! WTA Convention -- October 27, 2015! By Steve Pudloski! Transportation Information Center thanks its partners for their support and assistance Three sessions this morning! 8:30!Characteristics
Life Cycle Cost Analysis of Full Depth Reclamation versus Traditional Maintenance and Rehabilitation Strategies
Life Cycle Cost Analysis of Full Depth Reclamation versus Traditional Maintenance and Rehabilitation Strategies Andrew Braham University of Arkansas Rocky Mountain Asphalt Conference Denver, CO February
MATERIAL SPECIFICATION FOR AGGREGATES - MISCELLANEOUS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1004 NOVEMBER 2012 MATERIAL SPECIFICATION FOR AGGREGATES - MISCELLANEOUS TABLE OF CONTENTS 1004.01 SCOPE 1004.02 REFERENCES 1004.03 DEFINITIONS
Innovative Sustainable Pavement Solutions
2010 Concrete Sustainability Conference Innovative Sustainable Pavement Solutions Fares Abdo, P.E. and David Shepherd, AIA LEED AP Fares Abdo, P.E. and David Shepherd, AIA LEED AP Portland Cement Association
SECTION AGGREGATES
SECTION 32 05 00 AGGREGATES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Aggregate base 2. Engineered fill 3. Backfill 4. Fine filter aggregate (non-frost susceptible fill) 5. Riprap 6. Recreational
A. Texas Department of Transportation 2004 Standard Specifications for Construction and Maintenance of Highways, Streets and Bridges (TxDOT).
SECTION 32 01 16 ASPHALT OVERLAY PART 1 - GENERAL 1.1 SCOPE OF WORK A. This Section specifies the requirements for scarifying, grinding, sweeping and repair of existing asphalt concrete pavement to establish
General Information for Joints
Design Manual Chapter 5 - Roadway Design 5G - PCC Pavement Joints 5G-1 General Information for Joints A. General Information The need for a jointing system in concrete pavements results from the desire
Performance of Drained and Undrained Flexible Pavement. Structures under Wet Conditions. Accelerated Test Data. Test Section 544 Undrained
Performance of Drained and Undrained Flexible Pavement Structures under Wet Conditions Accelerated Test Data Test Section 544 Undrained Prepared for: California Department of Transportation by: Manuel
Asphalt Pavement Aging and Temperature Dependent Properties through a Functionally Graded Viscoelastic Model, Part-II: Applications
Materials Science Forum Vols. 631-632 (2010) pp 53-58 (2010) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/msf.631-632.53 Asphalt Pavement Aging and Temperature Dependent Properties
APPENDIX B ABC STRUCTURES DESIGN GUIDE
APPENDIX B ABC STRUCTURES DESIGN GUIDE The Cohos Evamy Partners TABLE OF CONTENTS Page No. DISCLAIMER... I 1. STRUCTURAL DESIGN GUIDELINES... 1 2. GENERAL REQUIREMENTS (FIGURE B.2, STEP 1)... 1 3. GENERAL
Quality Workmanship. Safely. On Time. Within Budget.
With a focus on delivering exceptional quality workmanship, VEA is a multi-disciplinary construction group that has established a sound reputation for project completion safely, on time and within budget
Characterizing Engineering Properties of Foundry Sands
Characterizing Engineering Properties of Foundry Sands Craig H. Benson, PhD, PE Recycled Materials Resource Center University of Washington chbenson@u.washington.edu www.recycledmaterials.org Recycled
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
NCC Accelerated Construction. Dan DeGraaf, P.E. Michigan Concrete Association April 26, 2011
NCC Accelerated Construction Dan DeGraaf, P.E. Michigan Concrete Association April 26, 2011 language to use Maslansky Luntz & Partners AASHTO Much of the standstill you experience sitting in traffic could
Ania M. Anthony, M.Sc., P. Eng. Senior Surfacing Engineer Saskatchewan Ministry of Highways and Infrastructure
Techniques for Low Volume Roads in Saskatchewan Ania M. Anthony, M.Sc., P. Eng. Senior Surfacing Engineer Saskatchewan Ministry of Highways and Infrastructure The Western Canada Pavement Workshop Feb 1-2,
Typical Dynamic Modulus Data for HMA Mixture and EMC SQUARED Stabilized Aggregate Mixture
Dynamic modulus is the main input required for design of Hot Mix Asphalt (HMA) pavements using the nationally recognized AASHTO Mechanistic-Emperical Pavement Design Guide (MEPDG). HMA pavement materials
Construction Specification for Concrete Unit Pavers
Engineering & Construction Services Division Standard Specifications for Road Works TS 3.80 September 2017 for Concrete Unit Pavers Table of Contents TS 3.80.01 SCOPE... 2 TS 3.80.02 REFERENCES... 2 TS
MNDOT PAVEMENT DESIGN MANUAL
MNDOT PAVEMENT DESIGN MANUAL Chapter 9 truction and Rehabilitation Alternates MnDOT Pavement Engineer Date Contents Introduction... 1 900 Existing Pavement-Types... 2 910 Rehabilitation with HMA Overlay
UNDERSTANDING THE EFFECTS OF SUBGRADES & SUBBASES ON PAVEMENT SERVICE LIFE. David J. White, Ph.D., P.E. Jerod P. Gross, P.E.
UNDERSTANDING THE EFFECTS OF SUBGRADES & SUBBASES ON PAVEMENT SERVICE LIFE David J. White, Ph.D., P.E. Jerod P. Gross, P.E., LEED AP Optimizing Pavement Base, Subbase, and Subgrade Layers for Cost and
SHRP2 R21 Composite Pavement Systems Project Overview
SHRP2 R21 Composite Pavement Systems Project Overview Michael I. Darter & Shreenath Rao Applied Research Associates, Inc. 2100 Louisiana Transportation Conference Baton Rouge, LA 10 January 2011 SHRP2
or (800)
WWW.CELL-CRETE.COM or (800) 669-0433 CALIFORNIA (Lic #243404), OREGON, WASHINGTON, NEVADA, UTAH, IDAHO, MONTANA, ARIZONA, HAWAII, ALASKA, WESTERN CANADA Re: Cellular Concrete as Engineered Fill I m pleased
ScienceDirect. Earth Pressure and Settlement Analysis of Trench Ducts Backfilled with Controlled Low Strength Materials
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 142 (2016 ) 174 181 Sustainable Development of Civil, Urban and Transportation Engineering Conference Earth Pressure and Settlement
Graham Salt, Allen Browne
Graham Salt, Allen Browne Tonkin & Taylor, Hiway Stabilizers Quantifying Improvements to Pavement Life from Basecourse Stabilisation Before and After Case Histories: Queenstown District SPONSORED BY: Road
CONSTRUCTION SPECIFICATION FOR CONCRETE CROSSWALK INDEX TS SCOPE...3
CITY OF TORONTO TS 3.65 TRANSPORTATION SERVICES STANDARD CONSTRUCTION SPECIFICATIONS June 2001 CONSTRUCTION SPECIFICATION FOR CONCRETE CROSSWALK INDEX TS 3.65.01 SCOPE...3 TS 3.65.02 TS 3.65.03 REFERENCES...3
GUIDE SCHEDULE OF SAMPLING & TESTING FOR DESIGN-BUILD PROJECTS BY THE INDEPENDENT QUALITY FIRM (IQF) August 29, 2017
GUIDE SCHEDULE OF & TESTING FOR DESIGN-BUILD PROJECTS BY THE INDEPENDENT QUALITY FIRM (IQF) August 29, 2017 Using the Guide Schedule The Independent Quality Firm (IQF) will perform materials sampling at
Sea to Sky Geotechnique 2006
MANAGEMENT OF SLOPE STABILITY FOR POTASH TAILINGS PILES IN SASKATCHEWAN. M.D. Haug, Department of Civil and Geological Engineering, University of Saskatchewan. mhaug@mdhsolutions.com, Saskatoon, SK, Canada
Spectrum of Axles Approach
Spectrum of Axles Approach Typical Axle Load Spectrum Axle Load (kn) Single Number of Axles Tandem Tridem Quad 50 60 5,000 400 100 5 61 80 3,000 2,000 500 10 81 100 200 5,000 800 30 101 120 50 4,000 1,000
IPWEA/WALGA Specification for the supply of recycled road base
IPWEA/WALGA Specification for the supply of recycled road base Version 1 May 2016 IPWEA/WALGA Specification for the supply of recycled road base FOREWORD These Specifications have been developed by the
Full-Depth Reclamation with Cement
Full-Depth Reclamation with Cement 28th Annual Regional Local Roads Conference David L. Rettner Sr. Vice President American Engineering Testing, Inc. Design Construction Field Testing Performance Types
Numerical Analysis of a Novel Piling Framed Retaining Wall System
The 12 th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG) 1-6 October, 2008 Goa, India Numerical Analysis of a Novel Piling Framed Retaining
Laboratory Testing of Vancouver HMA Mixes Containing Recycled Asphalt Shingles
Laboratory Testing of Vancouver HMA Mixes Containing Recycled Asphalt Shingles Ludomir Uzarowski, Ph.D., P.Eng., Golder Associates Ltd., Whitby, Ontario Hana Prilesky, P.Eng., Golder Associates Ltd., Vancouver,
COLD IN-PLACE RECYCLING (CIR) Starting with what is there i.e. in situ materials
COLD IN-PLACE RECYCLING (CIR) Starting with what is there i.e. in situ materials Definitions: ARRA (Asphalt Recycling/Reclaiming Ass.) Cold In-Place Recycling (CIR) is the on-site recycling process to
Extraction and Sieve Analysis ( µm minus) Forming Marshall Specimens, Field Method
3.56 COLD IN-PLACE RECYCLING 3.56.1 GENERAL This specification covers the requirements for Cold In-Place Recycling (CIR) which consists of reclaiming the existing asphalt pavement; sizing the reclaimed
lbfoster.com CXT CONCRETE TIES CATALOG
CXT CONCRETE TIES CATALOG L.B. Foster offers a complete line of CXT concrete railroad ties. Our catalog of concrete ties includes standard track, turnout, gantry and specialty ties, such as guard rail,
Study of Fracture Properties of Cement Stabilized Macadam
Study of Fracture Properties of Cement Stabilized Macadam Yinpeng Zhang Zhengzhou Municipal Engineering Design & Research Institute, Zhengzhou 45005, China Abstract By means of three-point bending method,
Introduction to Asphalt Pavement Design and Specifications
Introduction to Asphalt Pavement Design and Specifications Ensuring Good Performance in Flexible Pavement Design and Construction: accomplished through: 1. Proper structural (thickness) design for the
IFCEE 09, American Society of Civil Engineers, 2009, Orlando, Florida
IFCEE 9, American Society of Civil Engineers, 29, Orlando, Florida Field Evaluation of Fly Ash Stabilized Subgrade in US 12 Highway Lin Li 1, M. ASCE, P.E., Onur Tastan 2, Craig H. Benson 3, F. ASCE, P.E.,
SECTION XXXXX AGGREGATE PIERS PART 1 - GENERAL
SECTION XXXXX AGGREGATE PIERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 00 and Division
Inverted Pavement VULCAN MATERIALS COMPANY S EXPERIENCE
erted Pavement VULCAN MATERIALS COMPANY S EXPERIENCE What is an erted Pavement 2 to 3¼ HMA 6 to 8 Unbound Aggregate Base Compacted to 100% + Modified Proctor 6 to 10 Cement-Treated Base ( 4% cement) Prepared
Impact of Repeated Load on Crack Healing Cycles of Asphalt Concrete
American Journal of Traffic and Transportation Engineering 2016; 1(3): 26-33 http://www.sciencepublishinggroup.com/j/ajtte doi: 10.11648/j.ajtte.20160103.11 Impact of Repeated Load on Crack Healing Cycles
Mix Design & Construction -1-
Mix Design & Construction -1- AGENDA RCC Mix Design RCC Mix Production RCC Construction Process -2- THE FINAL SURFACE TYPE WILL DICTATE THE NECESSARY TECHNIQUES & EQUIPMENT NEEDED TO BE SUCCESSFUL Natural
MODULAR CONCRETE RETAINING WALL
MODULAR CONCRETE RETAINING WALL PART 1: GENERAL 1.01 Description A. Work shall consist of furnishing and construction of a KEYSTONE Retaining Wall System or equal in accordance with these specifications
STUDY ON THE PERMEABILITY OF THE RECYCLED AGGREGATE CONCRETE USING FLY ASH
STUDY ON THE PERMEABILITY OF THE RECYCLED AGGREGATE CONCRETE USING FLY ASH V. Bhikshma, Osmania University, India K. Divya, Osmania University, India 37th Conference on OUR WORLD IN CONCRETE & STRUCTURES:
BIO-AQUIFER STORM SYSTEM
BIO-AQUIFER STORM SYSTEM Specifications for Construction PART 1 GENERAL 1.01 SECTION INCLUDES A. Providing labor, materials, tools and equipment to furnish and install a permeable concrete paving stone
Parametric Study on Geogrid-Reinforced Track Substructure
IJR International Journal of Railway Vol. 6, No. 2 / June 2013, pp. 59-63 ISSN 1976-9067(Print) ISSN 2288-3010(Online) Parametric Study on Geogrid-Reinforced Track Substructure Jeongho Oh Abstract The
Technical Data. Recommended Applications Assistance Data for Dimensioning. Styrodur C Europe s green insulation
Technical Data Recommended Applications Assistance Data for Dimensioning Styrodur C Europe s green insulation 1. Recommended Applications Styrodur C Styrodur C 2500 C 2800 C 3035 CS 3035 CN 4000 CS 5000
Section ( ) SPECIFICATION FOR SEGMENTAL CONCRETE UNIT RETAINING WALL
Section 02834 (32 32 23) SPECIFICATION FOR SEGMENTAL CONCRETE UNIT RETAINING WALL PART 1: GENERAL 1.01 Description A. Work shall consist of furnishing and construction of a County Materials Retaining Wall
Experience with RAP and RAS at the MnROAD Research Facility. Tim Clyne NCAUPG Technical Conference January 23, 2013
Experience with RAP and RAS at the MnROAD Research Facility Tim Clyne NCAUPG Technical Conference January 23, 2013 A full-scale accelerated pavement testing facility that gives researchers a unique, real-life
Alligator Cracking. Light. Medium. High
Alligator Cracking Description: A series of interconnecting cracks caused by fatigue failure on the asphalt concrete surface under repeated traffic loading. Causes: Loads in excess of the current pavement
CHARACTERISTICS CSA A TECHO-BLOC Compressive strength psi [45 MPa] min.
![CHARACTERISTICS CSA A TECHO-BLOC Compressive strength psi [45 MPa] min.](/thumbs/74/69637242.jpg "CHARACTERISTICS CSA A TECHO-BLOC Compressive strength psi [45 MPa] min.")
PATIOS, WALKWAYS, POOLSIDES & STEPPING STONES PHYSICAL AND GEOMETRICAL CHARACTERISTICS CHARACTERISTICS CSA A231.1 2 TECHO-BLOC Compressive strength - 6 500 psi [45 MPa] min. Flexural strength 650 psi [4.5
THE USE OF FWD TESTING AS A QUALITY CONTROL TOOL DURING CONSTRUCTION
THE USE OF FWD TESTING AS A QUALITY CONTROL TOOL DURING CONSTRUCTION Joe Grobler, GHD, Australia Cameron Taylor, GHD, Australia ABSTRACT Falling Weight Deflectometer (FWD) testing has proven to be an effective
Static Response of Reinforced Soil Retaining Walls with Modular Block Facing
Static Response of Reinforced Soil Retaining Walls with Modular Block Facing Morteza Sabet 1, Amir M. Halabian 2, Kazem Barkhordari 3 1 Graduate Student, Department of Civil Engineering, Yazd University
National Industry Update and Strategic Directions CPAM Annual Workshop March 12, 2015
National Industry Update and Strategic Directions CPAM Annual Workshop March 12, 2015 Gerald F. Voigt, PE President & CEO American Concrete Pavement Association T 2 Thru Our Clearinghouse! Game Changer
Rehabilitation Recommendations for FM 97 in Gonzales County
Rehabilitation Recommendations for FM 97 in Gonzales County Technical Memorandum TM-14-04 Prepared for Texas Department of Transportation Maintenance Division Prepared by Texas A&M Transportation Institute
Structural Requirements of Bituminous Paving Mixtures
A2D04: Committee on Characteristics of Bituminous Paving Mixtures To Meet Structural Requirements Chairman: Reynaldo Roque Structural Requirements of Bituminous Paving Mixtures AMY EPPS, Texas A&M University
PART 1 - GENERAL 1.01 General Provisions A. The Conditions of the Contract and all Sections of Division 1 are hereby made a part of this Section.
Specification Sheet Grass Paver TECHNICAL SPECIFICATION - Grass Covered Flexible Porous Paver with 92% Void Space and Soil Conditioner/Fertilizer Mixture CSI Master Format 32 12 43 Flexible Porous Pavement
How to Select the Appropriate Pavement Rehabilitation Option. David Rettner, PE American Engineering Testing, Inc.
1 How to Select the Appropriate Pavement Rehabilitation Option David Rettner, PE American Engineering Testing, Inc. 2 Pavement Rehabilitation Selection Understanding the Problem 3 Pavement Assessment Pavement
EXPERIMENTAL AND NUMERICAL SIMULATIONS OF COLLAPSE OF MASONRY ARCHES
EXPERIMENTAL AND NUMERICAL SIMULATIONS OF COLLAPSE OF MASONRY ARCHES Łukasz Hojdys*, Tomasz Kamiński + & Piotr Krajewski* * Cracow University of Technology, Institute for Building Materials and Structures
NPTEL Course GROUND IMPROVEMENT USING MICROPILES
Lecture 22 NPTEL Course GROUND IMPROVEMENT USING MICROPILES Prof. G L Sivakumar Babu Department of Civil Engineering Indian Institute of Science Bangalore 560012 Email: gls@civil.iisc.ernet.in Contents
SECTION 2200 PAVING CITY OF BLUE SPRINGS, MISSOURI CONSTRUCTION SPECIFICATIONS
SECTION 2200 PAVING CITY OF BLUE SPRINGS, MISSOURI CONSTRUCTION SPECIFICATIONS The City of Blue Springs hereby adopts Section 2200 of the Kansas City Metropolitan Chapter of APWA Construction and Material
EXPANDED POLYSTYRENE (EPS GEOFOAM) EMBANKMENT DIVISION 31 EARTHWORK
(Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying AMVIC GEOFOAM products and execution. The specifier needs to edit the guide specifications to
SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7)
Page 1 of 7 STONE STRONG SYSTEMS SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 5/8/7) PART 1: GENERAL 1.01 Description A. Work includes furnishing and installing precast modular
Foundry Sand: Charactereistics, Specifications, Environmental Considerations, Availability
Foundry Sand: Charactereistics, Specifications, Environmental Considerations, Availability Tuncer B. Edil, PhD, PE, DGE Professor &Research Director Recycled Materials Resource Center University of Wisconsin-Madison
CERTIFIED. The Global Leader In Innovative Geotechnical Applications Using Synthetic Sheet Piling
Are you looking for a cost-effective, non-corrosive product that is environmentally friendly? The Global Leader In Innovative Geotechnical Applications Using Synthetic Sheet Piling CERTIFIED LEVEE/DIKE
RESILIENT MODULUS TESTING OF OPEN GRADED DRAINAGE LAYER AGGREGATES FOR INTERLOCKING CONCRETE BLOCK PAVEMENTS
RESILIENT MODULUS TESTING OF OPEN GRADED DRAINAGE LAYER AGGREGATES FOR INTERLOCKING CONCRETE BLOCK PAVEMENTS SUMMARY David Hein, P. Eng., Principal Engineer Applied Research Associates, Inc. 541 Eglinton
AN INVESTIGATION OF CEMENT COATING FOR NATURAL AGGREGATES IN POROUS ASPHALT BITUMINOUS MATERIALS Abbas M. ABBAS 1
AN INVESTIGATION OF CEMENT COATING FOR NATURAL AGGREGATES IN POROUS ASPHALT BITUMINOUS MATERIALS Abbas M. ABBAS 1 School of Built Environment, Liverpool John Moores, Byrom Street, Liverpool L3 3AF, UK
DEVELOPMENT OF HIGH PERFORMANCE ASPHALT CONCRETE USING LOW QUALITY AGGREGATES
DEVELOPMENT OF HIGH PERFORMANCE ASPHALT CONCRETE USING LOW QUALITY AGGREGATES ABSTRACT Viktors Haritonovs, Martins Zaumanis, Janis Tihonovs, Juris Smirnovs Riga Technical University, Department of Roads
The dynamic response of Kansas Perpetual Pavements under vehicle loading. Stefan A. Romanoschi*, Andrew J. Gisi and Cristian Dumitru
The dynamic response of Kansas Perpetual Pavements under vehicle loading by Stefan A. Romanoschi*, Andrew J. Gisi and Cristian Dumitru Stefan A. Romanoschi, Ph.D., P.E. Assistant Professor, Department
Resilient Moduli and Structural Layer Coefficient of Flyash Stabilized Recycled Asphalt Base
27 World of Coal Ash (WOCA), May 7-1, 27, Northern Kentucky, USA http://www.flyash.info Resilient Moduli and Structural Layer Coefficient of Flyash Stabilized Recycled Asphalt Base Anil Misra 1, Sunil
INNOVATIVE FIBRE REINFORCED BRIDGE DECK MODULES ABSTRACT
INNOVATIVE FIBRE REINFORCED BRIDGE DECK MODULES Heather Crocker, ISIS Canada, Winnipeg, MB Emile Shehata, Wardrop Engineering Inc., Winnipeg, MB Rick Haldane-Wilsone, Wardrop Engineering Inc., Winnipeg,
Overview. What is a Perpetual Pavement? Design Concept. PerRoad Pavement Design Software. Design Against Deep Structural Problems
PerRoad Pavement Design Sotware SEAUPG Annual Meeting Nashville, TN December 13, 2 Overview Perpetual Pavements Deined Design Principles Design Sotware PerRoad 2.4 Case Study Bin-Bo Expressway, Shandong