INVITATION TO BID B I D F O R M. Please submit bid on or before 2:15 pm 101 North Halagueno Street June 6, 2013, at the office of the

Size: px
Start display at page:

Download "INVITATION TO BID B I D F O R M. Please submit bid on or before 2:15 pm 101 North Halagueno Street June 6, 2013, at the office of the"

Transcription

1 BID NO.: INVITATION TO BID B I D F O R M Refuse Containers, Roll-Out Refuse Containers, Lids, Lid Assemblies, Front & Rear Replacement Lids, Piano and Loop Hinges City of Carlsbad Please submit bid on or before 2:15 pm 101 North Halagueno Street June 6, 2013, at the office of the Carlsbad, NM Purchasing Dept. Room 101. At Or precisely 2:15 p.m. on June 6, P O Box bids will be opened and Carlsbad, NM read aloud in Conference Room 116. GENERAL TERMS AND CONDITIONS 1. Bids must be clearly marked on the outside of the sealed envelope: Bid No Refuse Containers. 2. All bids must be submitted separately on bid forms furnished by the City of Carlsbad. 3. In order to be a valid bid, all bids must be signed. 4. Please submit three copies of your bid. 5. No alternate bids will be accepted. 6. When offering "or equal" brands bidders must submit the appropriate printed manufacturer's brochure or specification page outlining that particular item. If this material is not furnished the bidder is obligated to furnish the materials as specified. 7. If bid contains exceptions, please attach on a separate sheet your exceptions to the bid. 8. All bid prices, shall include all transportation charges. 9. The City reserves the right to accept bid on lowest overall bid price or lowest item price. 10. Prices must be held firm from July 1, 2013 through June 30, This bid indicates a list of estimated quantities that the City of Carlsbad may purchase during the contract term. The City of Carlsbad may not purchase all estimated quantities as indicated and therefore will not be held to these quantities. 12. The term of the agreement shall be for a period of one (1) year, renewable for three (3) additional years at the same terms and conditions specified herein provided, however, that such agreement may be terminated without penalty by the City in any year for which the City Council fails to appropriate sufficient funds. Total Bid Price SUBMITTED BY: New Mexico Identification Tax No. Name of Company City Business Registration Number Signature Resident Business Certification No. Print Name Business Address, Telephone No. City, State, Zip In order for 5% In-State Preference to be applied, Resident Business Certification Number must be submitted on this form. The Procurement Code, Sections through NMSA 1978, imposes civil and criminal penalties for its violation. In addition, the New Mexico criminal statutes impose felony penalties for illegal bribes, gratuities, and kickbacks. Acceptance of this bid constitutes a contract and is binding on both parties.

2 SUBJECT: REFUSE CONTAINERS, ROLL-OUT REFUSE CONTAINERS, LIDS, LID ASSEMBLIES, FRONT & REAR REPLACEMENT LIDS, PIANO AND LOOP HINGES BID GENERAL: The following specifications describe refuse, roll-out refuse, lids, lid assemblies, front & rear replacement lids, piano and loop hinges or equivalent to be used by the City s Public Works Department. All specifications shall be considered as minimum Gallon roll-out refuse Stability Container Size: Containers shall have a diameter of 32 inches at the top and 29 ½ inches at the bottom. Container Height: From the bottom to the top of the lids shall be 40 ⅝ inches., Wall thickness shall be 3/16 inch. Material: Ultraviolet stabilized Phillips Marlex CL100 or equal Color: Dark green Lid: Each container shall be furnished with a lid molded from the same material as the container. The lids shall be of such configuration that it shall not warp, bend, slump, or distort to an extent that it no longer fits the container properly or becomes otherwise unserviceable. Lid shall be dome shaped with a 36 ½ inch diameter and a 1- inch overhang. The distance from the bottom to the top of the dome shall be 6 inches Hardware: Each container shall be furnished with a lid stiffener, mounting hardware, axle, frame, hardware for axle attachment, two 12 inch cross linked (XL wheels) polyethylene wheels with minimum load pressure of 180 pounds and a handle which is so fabricated that only plastic coated surfaces are exposed to the user. The container shall be stable and self balancing when in the upright position, either loaded or empty. Identification Markings The lid shall have molded into it "City of Carlsbad". The "City of Carlsbad" shall be 1-1/2 inch. Each cart shall be sequentially serial numbered as follows: first 2 digits for the month the container was manufactured on, two digits for the year, and the last digits for the number of ordered Lid Assembly, Front & Rear replacement lids, Piano & Loop Hinges 2 of 7

3 2. BID NO Cubic Yard Metal Refuse Containers Compression Force: Each container shall be capable of withstanding a compression force of 200 pounds in the lifting and dumping process without permanent damage, deformation or structural failure. Finish: Interior and exterior surfaces shall be smooth as to have an even continuous surface. Interior surfaces shall have a high gloss finish. Warranty: Containers shall have a straight warranty for the first five years and a prorated warranty for the second five years. Quantities of 50 Quantities of 100 Delivery Date Must be compatible to the side loading equipment presently being used by the City. the City reserves the right to evaluate variations from these specifications. Length over radius of 53 inches Straight line front to back edge 49 ½ Height of back of container 57 inches Front loading height 39 Center line of attachment to bottom of box 26 Front depth of container 40 Bottom width inside 53 3/8 Steel gauge on complete container 12 gauge Container top support 12 gauge triple formed side channels and 7 gauge in front and rear Upper overall front width 61¾ Attachment for hooking to (EMCO style pick-up latches) Pick up latch attachment bolt ½ x 1 ¼ long, hexagon head bolt with nylok locknut 2a Lids, Hinges, and The lid assembly for 3 cubic yard metal Lid Assembly, Front & Rear replacement lids, Piano & Loop Hinges 3 of 7

4 2b BID NO Lid Components for 3 cubic yard metal refuse Container Body & Lifting Device refuse container shall be a three piece lid design consisting of one (1) rear metal lid and two front plastic lids. One (1) rear hinge and one (1) center hinge. All necessary hardware to be included for attachment to container. Rear lid to be constructed of 14 gauge steel. Hinges will be solid steel rods of ½ diameter or steel hinges. End of rods will be cut perpendicular to length of rods to allow end caplets to fit perfectly and tight. Rod length will be Two rods per lid assembly. Lids and necessary hardware shall be pre-assembled and properly packaged for delivery, final attachment to the container to be done by the City. Front, bottom, and back of body from one continuous piece of 12-gauge steel. Wrap around corners and continuous weld seams. Top of container reinforced with triple formed 12-gauge side channels with 7 gauge in front and back, or 1 tube reinforcement. Formed steel pads on the bottom of container. This will keep bottom of container from being directly in contact with the ground. One drain hole provided. EMCO lift brackets with three holes for attachment to container body, attachment to be done by the City. Container to have slight taper to prevent hanging of large items. Lift attachments for hooking to container will be constructed of ½ HR steel and bolted onto container to work with the EMCO style lifting device. Attachments to be packaged separately, all hardware included, for installation by the City. Painted inside and outside with high industrial enamel in the EMCO tan color. Metal to be cleaned of all foreign materials before painting. Painting will be one spray coat of red oxide primer and two coats of heavy industrial grade enamel in the EMCO tan color. ANSI Safety Stickers to be provided by Lid Assembly, Front & Rear replacement lids, Piano & Loop Hinges 4 of 7

5 3 Lid Assembly for EMCO (Rand) Brand tapered 3 cubic yard refuse bidder for each container. Guarantee: Body of container and all component parts shall be guaranteed for one (1) year of normal container use against faulty workmanship and materials. Sample Container: Successful bidder, at his expense, shall ship a sample container, built to these specifications, to the City for approval. Container Compatibility: Container must be compatible to the side loading equipment presently been used by the City. Delivery: All bid prices shall be FOB, Carlsbad, New Mexico Lift attachments will be packaged separately for installation by the City. Quantities of 50 Quantities of 100 Rear lid to be constructed of 16 gauge steel with a minimum of five (5) formed-in ribs along the length of the lid for reinforcement. The rear lid to be attached to the container body by means of two steel loop hinges and two 3/5" x 1 1/4" carriage bolts and nuts. This hardware is to be included as part of the lid assembly. Center hinge to be a piano type hinge. Piano hinge to be constructed of 14 gauge steel. The lower lip of the rear metal lid to be formed and bent around the piano hinge to add reinforcement. The center hinge to be spot welded to the lower lip of the rear metal lid. The two front lids shall be constructed of vacuum formed black polyethylene plastic with UV inhibitors. Each lid section shall be made from 6 pounds of resin. Cross ribbing to be molded into the lid to add structural rigidity and to prevent sagging. Front lids are to be pop-riveted to the piano type hinge. The edges of the rear and front lids to be formed to fit over the rim of the container to prevent water from entering the container. Front lids shall have a raised area where lids join in center to prevent water from entering Lid Assembly, Front & Rear replacement lids, Piano & Loop Hinges 5 of 7

6 4 Standard lid assembly and replacement lids for Wastequip Teem tapered three-yard side load refuse container between lids. Materials or products offered under this bid shall have a 10 year guarantee against defects in material or workmanship. Copy of guarantee must be attached. Quantities of 50 pairs Quantities of 100 paints Delivery Date The covers are to be 3-yard side load steel covers with the dimensions 18 3/4" x 60 3/4" x 14 gauge hot rolled supplied with: 5 Front replacement lids for tapered 3 cubic yard refuse (2 required) Two 1/2" x 63 1/2" hot rolled round rods One (1) 1/2" x 1 1/2" x 62 1/2" flat surface on the center metal hinge Two 1/2" x 1 1/2" x 1 15/16" tabs attached to the center metal hinge (reason for 1/2" compared to 1/4" is to assure hinge from falling in to container if it shifts any which way sideways). Plastic Lids-High molecular weight black polyethylene covers formed from material including a UV inhibitor; 6 formed ribs per cover and single wall material for extra strength; two covers per container. All hardware for the lid assemblies are to be provided by the bidder. Quantities of 50 Quantities of 100 Front replacement lids for tapered 3 cubic yard refuse shall be constructed of the same materials and under the same specifications given in Item 7, Lid Assembly for EMCO (rand) Brand tapered 1 ½ cubic yard Refuse Containers, for the two front lids Quantities of 50 pairs Lid Assembly, Front & Rear replacement lids, Piano & Loop Hinges 6 of 7

7 6 Rear replacement lid for tapered 3 cubic yard refuse (1 required) 7 Piano and loop hinge TOTAL COST Quantities of 100 pairs Delivery date Rear replacement lid for tapered 3 cubic yard Refuse Container shall be constructed of the same materials and under the same specifications given in item IV, Lid Assembly for EMCO (Rand) Brand tapered 3 cubic yard refuse for the rear lid. Quantities of 50 pairs Quantities of 100 pairs Delivery date Piano type hinge shall be constructed of the same materials and under the same specifications given in item 4 for EMCO Rand Brand tapered 3cy Refuse Containers for the piano type hinge. Estimated quantity 10 Loop type hinge shall be constructed of the same materials and under the same specifications given in item 4 for EMCO Rand Brand tapered 3cy Refuse Containers for the loop type hinge. Delivery date Does Not Conform VENDOR NOTES: Lid Assembly, Front & Rear replacement lids, Piano & Loop Hinges 7 of 7

INVITATION TO BID B I D F O R M. Please submit bid on or before 1:15 pm 101 North Halagueno Street May 30, 2014, at the office of the

INVITATION TO BID B I D F O R M. Please submit bid on or before 1:15 pm 101 North Halagueno Street May 30, 2014, at the office of the BID NO.: 2014-37 INVITATION TO BID B I D F O R M Refuse Containers, Roll-Out Refuse Containers, Lids, Lid Assemblies, Front & Rear Replacement Lids, Piano and Loop Hinges City of Carlsbad Please submit

More information

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017

PASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017 SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

B. Polyethylene samples shall be submitted for Owner approval of color and quality.

B. Polyethylene samples shall be submitted for Owner approval of color and quality. Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and

More information

HALLOWELL FORT KNOX Modular Utility Storage and Workbench System Specifications

HALLOWELL FORT KNOX Modular Utility Storage and Workbench System Specifications General: All modular components shall be "FORT KNOX Modular Utility Storage and Workbench System" components as manufactured by Hallowell or approved equal. All workbench pedestals, cabinets and lockers

More information

CITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS

CITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS CITY OF MOUNT DORA LIFT STATION CHAINLINK FENCE AND GATE SPECIFICATIONS PART 1 - GENERAL 1.01 SUMMARY A. Section Includes furnishing and installing chain-link fabric fence, gate, and appurtenances. 1.02

More information

SECTION METAL EQUIPMENT LOCKERS

SECTION METAL EQUIPMENT LOCKERS SECTION 10 51 13 - METAL EQUIPMENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

SECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN

SECTION MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN SECTION 08350 MANUAL FOUR FOLD DOORS MODEL 38 DECORATIVE PANEL DESIGN PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

More information

SECTION METAL ATHLETIC LOCKERS

SECTION METAL ATHLETIC LOCKERS SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

WEC Manufacturing Phone: (901) Website: Itswec.com

WEC Manufacturing Phone: (901) Website: Itswec.com All Welded Plus Series Part 1: General 1.1 Construction Requirements: All lockers shall be powder coated steel as design and manufactured by WEC, Memphis, Tennessee. WEC will furnish all labor and materials

More information

SECTION METAL ATHLETIC LOCKERS

SECTION METAL ATHLETIC LOCKERS SECTION 10 51 13 - METAL ATHLETIC LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

TEXAS DEPARTMENT OF TRANSPORTATION PROCUREMENT DIVISION TANK, POLYETHYLENE, ELLIPTICAL LEG, MINIMUM 1235 GALLON CAPACITY

TEXAS DEPARTMENT OF TRANSPORTATION PROCUREMENT DIVISION TANK, POLYETHYLENE, ELLIPTICAL LEG, MINIMUM 1235 GALLON CAPACITY TEXAS DEPARTMENT OF TRANSPORTATION PROCUREMENT DIVISION TANK, POLYETHYLENE, ELLIPTICAL LEG, MINIMUM 1235 GALLON CAPACITY PUBLICATION This specification is a product of the Texas Department of Transportation

More information

STATE OF NORTH CAROLINA N DEPARTMENT OF ADMINISTRATION October 24, 2012 PURCHASE AND CONTRACT DIVISION M July 31, 2009

STATE OF NORTH CAROLINA N DEPARTMENT OF ADMINISTRATION October 24, 2012 PURCHASE AND CONTRACT DIVISION M July 31, 2009 STATE OF NORTH CAROLINA 7110-3N DEPARTMENT OF ADMINISTRATION October 24, 2012 PURCHASE AND CONTRACT DIVISION SUPERSEDING 7110-3M July 31, 2009 SPECIFICATION FOR CABINETS, FILE, STEEL, VERTICAL (THIS SPECIFICATION

More information

WALL CANTILEVER WORK STATION JIB CRANE

WALL CANTILEVER WORK STATION JIB CRANE SECTION 14662 WALL CANTILEVER WORK STATION JIB CRANE ***** Gorbel, Inc. manufactures a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station

More information

City of Minot Auditorium Non-Upholstered Arena Seating Specifications

City of Minot Auditorium Non-Upholstered Arena Seating Specifications City of Minot Auditorium Non-Upholstered Arena Seating Specifications **ALL BIDDERS MUST INCLUDE A DETAILED DRAWING FOR UPPER SEATING AREAS WITH THEIR BID. ALL DRAWINGS MUST INCLUDE ALL RELEVANT MEASUREMENTS,

More information

TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION TANK, POLYETHYLENE, HORIZONTAL LEG, MINIMUM 500 GALLON CAPACITY PUBLICATION

TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION TANK, POLYETHYLENE, HORIZONTAL LEG, MINIMUM 500 GALLON CAPACITY PUBLICATION TEXAS DEPARTMENT OF TRANSPORTATION GENERAL SERVICES DIVISION SPECIFICATION NO. DHT NO.: 153743 TANK, POLYETHYLENE, HORIZONTAL LEG, MINIMUM 500 GALLON CAPACITY PUBLICATION This specification is a product

More information

DIVISION 10 SPECIALTIES SECTION METAL LOCKERS

DIVISION 10 SPECIALTIES SECTION METAL LOCKERS DIVISION 10 SPECIALTIES SECTION 10 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION METAL STUDENT LOCKERS

SECTION METAL STUDENT LOCKERS SECTION 10 51 13 - METAL STUDENT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES 1. DESCRIPTION: Furnish and install Heavy-Duty Ventilated (HDV) ELITE Metal Lockers, complete, as shown and specified per contract

More information

SECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:

SECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following: SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications

More information

STATE OF NORTH CAROLINA C DEPARTMENT OF ADMINISTRATION February 1, 2013 PURCHASE AND CONTRACT DIVISION B February 23, 2005

STATE OF NORTH CAROLINA C DEPARTMENT OF ADMINISTRATION February 1, 2013 PURCHASE AND CONTRACT DIVISION B February 23, 2005 STATE OF NORTH CAROLINA 7105-4C DEPARTMENT OF ADMINISTRATION February 1, 2013 PURCHASE AND CONTRACT DIVISION Superseding 7105-4B February 23, 2005 SPECIFICATION FOR TABLES, MOBILE, FOLDING (This specification

More information

BID # ELLIS MIDDLE LOCKERS

BID # ELLIS MIDDLE LOCKERS BID # 20140729 ELLIS MIDDLE LOCKERS The Sumner County Board of Education, herein known as School System, is soliciting bids for the purchase and installation of new lockers. The vendor must include cost

More information

MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE

MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE ELECTRICAL SPECIFICATION 1453 DIVISION OF ENGINEERING DEPARTMENT OF TRANSPORTATION CITY OF CHICAGO REVISED MARCH 14, 2013 MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE SUBJECT 1. This specification covers

More information

Q Line Shelving Bulk Storage Shelving Heavy Duty Reinforced Shelving

Q Line Shelving Bulk Storage Shelving Heavy Duty Reinforced Shelving Q Line Shelving Bulk Storage Shelving Heavy Duty Reinforced Shelving SYSTEMS FOR SUCCESS Q Line Shelving Q Line Shelving is designed for those storage applications that demand strength and versatility.

More information

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011. DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:

More information

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work. SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,

More information

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification

More information

Student Services & Classroom Addition

Student Services & Classroom Addition SECTION 055113 - METAL PAN STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces.

1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces. SECTION 05500- METAL FABRICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Flat Bank SERIES 05FB AND 07FB. Options CONSTRUCTION FEATURES EQUIPMENT OPTIONS PRODUCT DATA CLEAN-LINE TM SERIES 05FB/07FB PD-CLFB-03A JANUARY 2003

Flat Bank SERIES 05FB AND 07FB. Options CONSTRUCTION FEATURES EQUIPMENT OPTIONS PRODUCT DATA CLEAN-LINE TM SERIES 05FB/07FB PD-CLFB-03A JANUARY 2003 PRODUCT SERIES 05FB/07FB PD-CLFB-03A FILTRATION EQUIPMENT SERIES 05FB AND 07FB 2" AND 4" FLAT BANK FILTER HOUSINGS Flat Bank CONSTRUCTION FEATURES 16 GAUGE ALUMINIZED STEEL FACTORY ASSEMBLED (2) HINGED

More information

SECTION ALUMINUM HANDRAIL SYSTEMS

SECTION ALUMINUM HANDRAIL SYSTEMS SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American

More information

SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS

SECTION SOLID PHENOLIC PLASTIC TOILET PARTITIONS PRODUCT SPECIFICATION SERIES 1080/1180 PART 1 - GENERAL 1.01 Work Included SECTION 10170 SOLID PHENOLIC PLASTIC TOILET PARTITIONS A. Toilet Compartments B. Urinal Screens C. Shower Dividers D. Dressing

More information

A-Series Aluminum Gantry Crane

A-Series Aluminum Gantry Crane SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or

More information

SECTION ORNAMENTAL WELDED STEEL FENCING

SECTION ORNAMENTAL WELDED STEEL FENCING SECTION 032300 ORNAMENTAL WELDED STEEL FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

City of Bristol, Tennessee P.O. Box 1189 Bristol, Tennessee Bid Reference No

City of Bristol, Tennessee P.O. Box 1189 Bristol, Tennessee Bid Reference No City of Bristol, Tennessee P.O. Box 1189 Bristol, Tennessee 37621-1189 INVITATION TO BID Bid Reference No. 18018 September 5, 2018 Competitive sealed bids will be received by the City of Bristol, Tennessee

More information

1. Supply, delivery, engineering and installation of new storage equipment.

1. Supply, delivery, engineering and installation of new storage equipment. SECTION 10 51 13 - METAL LOCKERS * ALL FIELDS IN [ ] MUST BE EDITED PART 1 - GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

More information

05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES

05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories

More information

Architect and Engineer Specifications

Architect and Engineer Specifications Architect and Engineer Specifications 10901 Hampshire Ave. So., Minneapolis, Minnesota 55438-2385 U.S.A. Telephone: (800) 447-2257 or (952) 944-9050 FAX: (800) 421-3839 or (952) 944-1546 2008 Winsted Corporation

More information

Downloaded from

Downloaded from A-A-2380 August 22, 1985 COMMERCIAL ITEM DESCRIPTION DISPENSER, PAPER TOWEL The general Services Administration has authorized the use of this Commercial Item Description in preference to Federal Specification

More information

Recycling/Roll-off bins/containers for the Solid Waste Division of the Boone County Fiscal Court

Recycling/Roll-off bins/containers for the Solid Waste Division of the Boone County Fiscal Court Boone County, Kentucky Bid #: 120816SW Recycling/Roll-off bins/containers for the Solid Waste Division of the Boone County Fiscal Court ACCEPTANCE DATE: Prior to 2:00 p.m., December 8, 2016 Local time

More information

DIVISION 10 SPECIALTIES SECTION OPERABLE PARTITIONS

DIVISION 10 SPECIALTIES SECTION OPERABLE PARTITIONS DIVISION 10 SPECIALTIES SECTION 10 22 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Model # PR /21/2018 Page 1 of 10

Model # PR /21/2018 Page 1 of 10 Model # PR-32 11/21/2018 Page 1 of 10 1/21/2018 Page 2 of 10 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic

More information

Rytec Corporation One Cedar Parkway Jackson, WI GO-RYTEC (262)

Rytec Corporation One Cedar Parkway Jackson, WI GO-RYTEC (262) Rytec Corporation One Cedar Parkway Jackson, WI 53037 1-888-GO-RYTEC (262) 677-9046 WWW.Rytecdoors.com Pharma-Swing Model Number PSW12002 SECTION 08300 HIGH PERFORMANCE FIBERGLASS SWING DOOR PAIR PART

More information

CITY OF KENOSHA PUBLIC WORKS DEPARTMENT- STREETS DIVISION CARBIDE PLOW CUTTING EDGES, COVER BLADES AND CURB GUARDS PROPOSAL NO.

CITY OF KENOSHA PUBLIC WORKS DEPARTMENT- STREETS DIVISION CARBIDE PLOW CUTTING EDGES, COVER BLADES AND CURB GUARDS PROPOSAL NO. CITY OF KENOSHA PUBLIC WORKS DEPARTMENT- STREETS DIVISION CARBIDE PLOW CUTTING EDGES, COVER BLADES AND CURB GUARDS PROPOSAL NO. 18-18 INSTRUCTIONS TO BIDDERS Sealed bids will be accepted by the City of

More information

SECTION 1208 CHAIN LINK FENCING DESCRIPTION

SECTION 1208 CHAIN LINK FENCING DESCRIPTION SECTION 1208 CHAIN LINK FENCING 1208-1 DESCRIPTION This item covers the requirements for furnishing materials and constructing new chain link fences and gates in accordance with the details included herein

More information

Aluminum Perforated Rolling Door

Aluminum Perforated Rolling Door Model ALUMA-VISION Perforated Curved or Flat Slats Rolling Service Door NOTE: For specifications, architects must choose from a variety of options. The standard choice will be shown first in plain text

More information

SECTION ACCORDION FOLDING PARTITIONS

SECTION ACCORDION FOLDING PARTITIONS PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable

More information

-1- SPECIFICATIONS CONE SETTER PLATFORM ATTACHMENT INDEX

-1- SPECIFICATIONS CONE SETTER PLATFORM ATTACHMENT INDEX -1- SPECIFICATIONS 002085 CONE SETTER PLATFORM ATTACHMENT INDEX I. GENERAL EQUIPMENT SPECIFICATIONS: A. Intent Statement B. Cone Setter Platform II. III. 1. Understructure Frame 2. Mounting Components

More information

SHERIDAN SEATING INC.

SHERIDAN SEATING INC. SHERIDAN SEATING INC. ARENA SEATING SPECIFICATIONS PART 1 GENERAL 1.1 Description A. Scope 1. Telescopic seating systems comprised of multi-tiered rows of seats, deck components and risers on interconnected,

More information

SECTION CHAIN LINK FENCES AND GATES (PARK)

SECTION CHAIN LINK FENCES AND GATES (PARK) SECTION 02821 CHAIN LINK FENCES AND GATES (PARK) PART I GENERAL 1.1 SECTION INCLUDES A. Installation of chain link fences, and gate units provided by single source including erection accessories, fittings,

More information

Hobby Parking Office HOU/ Proj./ No. 738 Houston, Texas 100% Bid and Construction Documents- Addendum #3, January 27, 2017

Hobby Parking Office HOU/ Proj./ No. 738 Houston, Texas 100% Bid and Construction Documents- Addendum #3, January 27, 2017 SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Knocked-down corridor lockers (double tier) 1.2 ACTION SUBMITTALS A. Product data. B. Shop Drawings: Include plans, elevations,

More information

SECTION AWNINGS

SECTION AWNINGS SECTION 10 73 13 AWNINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Fixed metal awnings. 1.2 DEFINITIONS A. Awning: An architectural projection that provides weather protection,

More information

All proposals will be evaluated by a district committee. The following criteria/weighting will be used to evaluate each proposal:

All proposals will be evaluated by a district committee. The following criteria/weighting will be used to evaluate each proposal: The School District of Newberry County Request for Proposals Newberry High School Countertop/Toilet Partitions Replacement The School District of Newberry County is accepting proposals for Boys and Girls

More information

Preassembled steel stairs with concrete-filled treads.

Preassembled steel stairs with concrete-filled treads. SECTION 055113 - PART 1 - GENERAL 1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this

More information

SHERIDAN SEATING INC.

SHERIDAN SEATING INC. SHERIDAN SEATING INC. THEATER PLATFORM SEATING SPECIFICATIONS PART 1 GENERAL 1.1 Description A. Scope 1. Telescopic platform systems comprised of multi-tiered rows of seats, deck components and risers

More information

WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947

WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947 WEATHER BREAKER MODEL 175 QUALITY DOOR SOLUTIONS SINCE 1947 WEATHER BREAKER MODEL 175 Whether you are keeping the cold out or in, nothing makes better sense for your manufacturing facility or warehouse

More information

POLE: ANCHOR BASE, ALUMINUM, TAPERED TUBULAR SHAFT

POLE: ANCHOR BASE, ALUMINUM, TAPERED TUBULAR SHAFT ELECTRICAL SPECIFICATION 1452 DIVISION OF ENGINEERING DEPARTMENT OF TRANSPORTATION CITY OF CHICAGO REVISED MARCH 19, 2014 POLE: ANCHOR BASE, ALUMINUM, TAPERED TUBULAR SHAFT SUBJECT 1. This specification

More information

DIVISION 2 - SITE WORK

DIVISION 2 - SITE WORK Montgomery County Public Schools Facilities Guide DIVISION 2 - SITE WORK Conditions of Use/ Responsibility of Data These guideline specifications are to be used by the A/E as a base document in the development

More information

Model # 338S-PR. 5/1/2014 Page 1 of 12

Model # 338S-PR. 5/1/2014 Page 1 of 12 Model # 338S-PR 5/1/2014 Page 1 of 12 /1/2014 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic

More information

SECTION FIBERGLASS REINFORCED POLYMER (FRP) PANELS

SECTION FIBERGLASS REINFORCED POLYMER (FRP) PANELS SECTION 07 44 50 FIBERGLASS REINFORCED POLYMER (FRP) PANELS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Design, Engineering, manufacturing and erection of fiberglass reinforced panels. Delegated Design of

More information

SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:

SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including: Page 1 of 8 SECTION 083919 WATERTIGHT DOORS **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for your specific project

More information

Automated Cantilevered Aluminum Sliding Gate

Automated Cantilevered Aluminum Sliding Gate Town of Derry, New Hampshire REQUEST FOR PROPOSALS B18-128 January 25, 2018 The Town of Derry - Department of Public Works is seeking proposals for: Automated Cantilevered Aluminum Sliding Gate Introduction

More information

SECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System

SECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF MODULAR PAN SYSTEM PART 1 GENERAL 1.1

More information

SECTION ALUMINUM GATES

SECTION ALUMINUM GATES P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,

More information

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...

More information

Model # 338SM-OP. 9/30/2011 Page 1 of 12

Model # 338SM-OP. 9/30/2011 Page 1 of 12 Model # 338SM-OP 9/30/2011 Page 1 of 12 9/30/2011 Page 2 of 12 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic

More information

SECTION HOLLOW METALWORK. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

SECTION HOLLOW METALWORK. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. SECTION 081113 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting

More information

Request for Bids. For Purchase of 316L Stainless Steel (SS) Storage Tank(s) for the Nutrient Reduction Facility (NuRF) RFB No.

Request for Bids. For Purchase of 316L Stainless Steel (SS) Storage Tank(s) for the Nutrient Reduction Facility (NuRF) RFB No. Request for Bids For Purchase of 316L Stainless Steel (SS) Storage Tank(s) for the Nutrient Reduction Facility (NuRF) RFB No. 2016-03 Issued by: Lake County Water Authority 107 North Lake Avenue Tavares,

More information

A-Series Steel Gantry Crane

A-Series Steel Gantry Crane SPANCO PRODUCT SPECIFICATIONS 1 A-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or application.

More information

10331 Date Street Murrieta, CA SECTION HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS

10331 Date Street Murrieta, CA SECTION HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS 09/20/2017 10331 Date Street Murrieta, CA 92562 info@foremanproducts.com 951-677-1955 SECTION 10 5130 HYBRID LAMINATE LOCKERS W/ PHENOLIC DOORS PART 1 GENERAL Specifier Notes: This product specification

More information

METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION)

METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION) Page 1 of 6 SECTION 05515 METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION) PART 1 - GENERAL 1.1 SECTION INCLUDES A. Specialty custom designed, spring assisted, self-closing LADDER SAFETY GATE (LSG) for

More information

CITY OF KENOSHA REQUEST FOR PROPOSALS BARRICADES, SHEETING AND TRAFFIC CONES PROPOSAL NO NOTICE AND CONDITIONS

CITY OF KENOSHA REQUEST FOR PROPOSALS BARRICADES, SHEETING AND TRAFFIC CONES PROPOSAL NO NOTICE AND CONDITIONS CITY OF KENOSHA REQUEST FOR PROPOSALS BARRICADES, SHEETING AND TRAFFIC CONES PROPOSAL NO. 04-17 ISSUED : January 10, 2017 NOTICE AND CONDITIONS 1. Proposals for barricades, barricade sheeting and traffic

More information

SECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)

SECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

More information

SECTION MISCELLANEOUS METALS

SECTION MISCELLANEOUS METALS PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications

More information

SHERIDAN SEATING INC.

SHERIDAN SEATING INC. SHERIDAN SEATING INC. TELESCOPIC BLEACHER SPECIFICATIONS PART 1 GENERAL 1.1 Description A. Scope 1. Telescopic seating systems comprised of multi-tiered rows of seats, deck components and risers on interconnected,

More information

The Kodiak 3200 Seating System by Royal Stewart Ltd.:

The Kodiak 3200 Seating System by Royal Stewart Ltd.: The Kodiak 3200 Seating System by Royal Stewart Ltd.: PART 1 GENERAL 1.01 Summary A. Bleacher System shall be Series 3200 Platforms as manufactured by Royal Stewart Ltd., Winnipeg, Manitoba, in accordance

More information

SECTION METAL STAIRS

SECTION METAL STAIRS SECTION 05 51 00 METAL STAIRS PART 1 GENERAL 1.1 SUMMARY A. Section includes steel stair frame of structural sections, with closed risers; pan to receive concrete fill stair treads and landings; integral

More information

220 E. General Robinson St. Pittsburgh, PA fax

220 E. General Robinson St. Pittsburgh, PA fax B BAR-CO ACCESS DOORS... 4 D DOOR Bar-Co Access... 4 Republic & Frames... 2 DORMA Architectural Hardware... 6 G GENERAL PARTITIONS... 7 L LOCKER... 5 M MOHAWK DOORS... 3 P PIPE RAILING... 8 R RAILING...

More information

N-SERIES: NTH3500 SPECIFICATIONS Hollow Metal Sliding Door System

N-SERIES: NTH3500 SPECIFICATIONS Hollow Metal Sliding Door System Version 5.22.13 N-SERIES: NTH3500 SPECIFICATIONS Hollow Metal Sliding Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER FOR ADDITONAL

More information

MECHANICAL LEVELERS. P.O. Box 338 Spring Hill, Tennessee /486/ /251/3382 Fax 931/486/0316

MECHANICAL LEVELERS. P.O. Box 338 Spring Hill, Tennessee /486/ /251/3382 Fax 931/486/0316 EDE & BLE Owner s Manual MECHANICAL LEVELERS P.O. Box 338 Spring Hill, Tennessee 37174 931/486/2296 800/251/3382 Fax 931/486/0316 www.pioneerleveler.com SM SECTION 1 RECEIVING: INSTALLATION INSTRUCTIONS

More information

SPECIFICATION FOR SIMPLEX SWITCHBOARDS

SPECIFICATION FOR SIMPLEX SWITCHBOARDS SPECIFICATION FOR SIMPLEX SWITCHBOARDS 1.0 SCOPE This specification presents general guidelines, design criteria, and construction requirements for AZZ ENCLOSURE SYSTEMS SIMPLEX PANELS for providing control

More information

SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:

SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including: Page 1 of 8 SECTION 083921 PEDESTRIAN FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for your

More information

SECTION METAL FLOOR PLATE STAIRS

SECTION METAL FLOOR PLATE STAIRS SECTION 05513 - METAL FLOOR PLATE STAIRS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION 1043 FENCE MATERIAL

SECTION 1043 FENCE MATERIAL SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance

More information

ROAD COMMISSION FOR OAKLAND COUNTY. SPECIAL PROVISION FOR GABION WALL RCOC/DESIGN: AB Page 1 of 8 RCOC12SP706F 10/28/2013

ROAD COMMISSION FOR OAKLAND COUNTY. SPECIAL PROVISION FOR GABION WALL RCOC/DESIGN: AB Page 1 of 8 RCOC12SP706F 10/28/2013 ROAD COMMISSION FOR OAKLAND COUNTY SPECIAL PROVISION FOR GABION WALL RCOC/DESIGN: AB Page 1 of 8 RCOC12SP706F a. Description This work shall be done in accordance with Section 205 and 206 of the 2012 Michigan

More information

HIGH MAST CAMERA POLE ASSEMBLY GENERAL

HIGH MAST CAMERA POLE ASSEMBLY GENERAL 10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera

More information

SECTION ORNAMENTAL ALUMINUM FENCING

SECTION ORNAMENTAL ALUMINUM FENCING SECTION 032300 ORNAMENTAL ALUMINUM FENCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651

SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows as

More information

Model # 800SM-PS3. 8/3/2016 Page 1 of 8

Model # 800SM-PS3. 8/3/2016 Page 1 of 8 Model # 800SM-PS3 8/3/2016 Page 1 of 8 /3/2016 Page 2 of 8 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic

More information

FF200, FOUR-FOLD DOORS CONSULT MANUFACTURER FOR ADDITIONAL OPTIONS OR MODIFICATIONS.

FF200, FOUR-FOLD DOORS CONSULT MANUFACTURER FOR ADDITIONAL OPTIONS OR MODIFICATIONS. FF200, FOUR-FOLD DOORS CONSULT MANUFACTURER FOR ADDITIONAL OPTIONS OR MODIFICATIONS. PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary

More information

Model # 238HS-P8. 4/27/2011 Page 1 of 11

Model # 238HS-P8. 4/27/2011 Page 1 of 11 Model # 238HS-P8 4/27/2011 Page 1 of 11 4/27/2011 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic

More information

SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:

SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including: Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for

More information

SECTION ALUMINUM WALKWAY COVERS. A. The requirements of Division 1 specifications shall apply to work specified in the section.

SECTION ALUMINUM WALKWAY COVERS. A. The requirements of Division 1 specifications shall apply to work specified in the section. SECTION 10 5300 ALUMINUM WALKWAY COVERS Part 1 General 1.01 Related Documents A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.02 References A. International

More information

SECTION Summit Phenolic Lockers (Solid Phenolic Lockers)

SECTION Summit Phenolic Lockers (Solid Phenolic Lockers) SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with

More information

STANDARD SHELTER SPECIFICATIONS ATTACHMENT A

STANDARD SHELTER SPECIFICATIONS ATTACHMENT A STANDARD SHELTER SPECIFICATIONS 16-04 ATTACHMENT A Issued: November 2, 2015 Technical Specifications ---------------------------------------------------------------------------------------------------------------

More information

Model # 338S-P. 7/31/2012 Page 1 of 13

Model # 338S-P. 7/31/2012 Page 1 of 13 Model # 338S-P 7/31/2012 Page 1 of 13 7/31/2012 Page 2 of 13 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic

More information

COLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100

COLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100 COLLEGE CLASSROOM & DORMITORY SPECIFICATION SECTION 08100 Part 1 General 1.01 Work Included A. The work under this section shall include the furnishing of all items shown on the drawings and as specified,

More information

HOTEL SPECIFICATION SECTION 08100

HOTEL SPECIFICATION SECTION 08100 Part 1 General HOTEL SPECIFICATION SECTION 08100 1.01 Work Included A. The work under this section shall include the furnishing of all items shown on the drawings and as specified including, but not limited

More information

SECTION STRUCTURAL METAL FRAMING

SECTION STRUCTURAL METAL FRAMING SECTION 05100 STRUCTURAL METAL FRAMING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Structural steel framing including lintels, shelf angles, bearing plates, anchor bolts and other items as shown on

More information

E-Series Steel Gantry Crane

E-Series Steel Gantry Crane SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.

More information

SECTION ROLLER GATES

SECTION ROLLER GATES GENERAL SUMMARY A. The Contractor shall provide all labor, materials, equipment, and incidentals required to furnish and install roller gates, complete and operational with all necessary accessories as

More information