On Time To Specification
|
|
- Adele Underwood
- 6 years ago
- Views:
Transcription
1 On Time To Specification
2 Alltype Engineering provides high quality Pipework Systems, Structural Steel, Plate Fabrication, Site Installation & Maintenance services to the Water, Mining, Infrastructure and Oil & Gas industries. Gateway to Resources Projects Our head office and manufacturing facilities are strategically located at Naval Base with an oversize load corridor and unrestricted access to port infrastructure. Alltype Engineering has over 25 years industry experience. Our key strength is that we are uniquely placed to undertake a comprehensive range of multifaceted fabrication and welding projects. Supported by our team of multi-disciplinary experts we assure consistent high quality products and service which underpins our commitment to delivering on time to specification.
3 Fabrication Alltype Engineering s fully equipped workshop consists of an undercover workspace of more than 6000m 2. We have the capacity to handle over 5000 tonnes of structural material, 4000 tonnes of piping material and 3000 tonnes of plate per annum. In addition to the workshop is a 2000m 2 assembly area for the erection of structural components. Our key capabilities are: Pipe Spooling, including - Mild Steel Cement Lined (MSCL) - Stainless Steel - Duplex and Super-Duplex Stainless Steel Structural Steel Subsea Structures Pressure Vessels Silos, Chutes, Hoppers & Tanks SMP Alltype Engineering provides high quality, cost effective project solutions and mechanical installation services. Our highly skilled personnel have extensive experience in Structural, Mechanical, Pipework installation and can be quickly mobilised to any site in Australia. Our key capabilities are: Mechanical equipment installation Pump Station installation Structural Steel erection Bulk Storage Tank erection Pipework installation Silos, Chutes, Hoppers & Tank installation Maintenance Alltype Engineering provides industrial maintenance services including planned, emergency shutdowns and mechanical upgrades. We provide clients with custom solutions and provide 24 hour support for all maintenance projects.
4 Our key strength is in our multi-faceted range of fabrication & welding capabilities Health, Safety & Environment Alltype Engineering conducts business with the highest safety standards attainable backed by accreditation to AS/NZS: Our commitment to safety is communicated at every level of our business. Alltype Engineering constantly seek new initiatives to enhance safety measures. Quality As an ISO 9001:2008 certified company, we are committed to providing our clients with the highest quality products and services. As an enhancement to our stringent internal quality system we provide full material and welding traceability of manufactured items to client specifications.
5 Project Experience PROJECT LOCATION SCOPE OF WORK Chevron-operated Gorgon Project Barrow Island, WA Fabrication: - Structural Steel Rio Tinto Coastal Waters Panawonica, WA Fabrication & Site Installation: - Pipe Spooling - Buried (MSCL) Pipeline Welding - Transfer Station Southern Seawater Desalination Plant Binningup, WA Fabrication: (100GL) - Pipe Spooling: Duplex and Super-Duplex, Stainless Steel - Structural Steel: Reverse Osmosis Racks Site Installation: - Reverse Osmosis Racks Assembly & Pipework FMG T155 Port Expansion Port Hedland, WA Fabrication: - Structural Steel Ravenswood Transfer Pump Station Ravenswood, WA Fabrication: - Pipe Spooling: Mild Steel Cement Lined (MSCL) Site Installation: - Structural, Mechanical and Pipework Bluewaters Power Station Collie, WA Fabrication: - Pipe Spooling: Stainless Steel, Mild Steel Cement Lined (MSCL) Site Installation: - Structural, Mechanical and Pipework Twin Hills Silver Mine Texas, QLD Fabrication: - Pressure Vessel Sabodala Gold Expansion Project Senegal, Africa Fabrication: - Pipe Spooling: Rubber Lined CSBP Kwinana, WA Maintenance: - Fabrication - Capital projects - Plant upgrades - Remedial Works Our multi-disciplinary experts assure consistent high quality products and service which underpins our commitment to delivering on time to specification
6 ALLTYPE ENGINEERING 52 Hope Valley Road, Naval Base Western Australia 6165 p: (+61) e:
Capability Statement
Capability Statement Contents 1. About Us 2. Company Overview 3. Company Information 4. Personnel 5. Facilities 6. Pressure Piping & Vessels 7. Structural Steel 8. Labour Hire 9. Quality Assurance 10.
More informationCAPABILITY PROFILE Metal Maintenance Pty Ltd Capabilities
CAPABILITY PROFILE Metal Maintenance Pty Ltd Capabilities Metal Maintenance specialises in metal fabrication, mechanical fitting, maintenance and rectification services for complex industrial plants including
More informationCNC PROFILING PLATE ROLLING SUBMERGED ARC WELDING
CNC PROFILING PLATE ROLLING SUBMERGED ARC WELDING HDS Energy has over thirty years experience in the design, manufacture and installation of bespoke boiler solutions for large energy and power projects
More informationONE STOP WHOLE-OF-MINE MATERIALS HANDLING SERVICE WEARX FOUNDRY CAPABILITIES
ONE STOP WHOLE-OF-MINE MATERIALS HANDLING SERVICE WEARX FOUNDRY CAPABILITIES FACILITY WEARX s foundry facility is based in Ballina in Northern New South Wales, Australia. The WEARX foundry provides a rapid
More informationSouth East Queensland Water Grid
Department of South East Queensland Water Grid IPLOCA International Pipeline and Offshore Contractors Association South East Queensland Water Grid Department of Background About the SEQ Water Grid Progress
More informationKAEFER Integrated Services Pty Ltd
KAEFER Integrated Services Pty Ltd An Introduction to Insta-Lag and TIPS 1 Prefabricated Insulation Systems The prefabricated Insta-Lag and TIPS insulation systems are designed by KAEFER as innovative,
More informationCEMENT INDUSTRY PROJECT EXPERIENCE
Page 1 of 16 CEMENT INDUSTRY PROJECT EXPERIENCE CORTEX ENGINEERING RESOURCES PTY LTD Suite 102, 254 Bay Road, Sandringham, Vic. 3191 ichamberlain@cortex.com.au ph +61 3 9543 5225 fax +61 3 9543 5223 www.cortex.com.au
More informationPROCHEM Stainless Steel Specialists
PROCHEM Stainless Steel Specialists Product solutions for a world of difference PIPING PRODUCTS PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC Duplex Prochem
More informationConstruction and Civil Contracting SLIPFORM CONSTRUCTION
Construction and Civil Contracting SLIPFORM CONSTRUCTION Slipform construction of the building core on the Bishops See project in Perth, WA SLIPFORM CONSTRUCTION 2 The advantages of the slipform system
More informationCOMPANY PROFILE. We are big enough to do any job and small enough to be responsive!
COMPANY PROFILE NATURE OF BUSINESS Global Fabrication and Maintenance (Pty) Ltd is a Broad Based Black Economic Empowerment (BBBEE) company involved with a wide range of repetitive steel fabrication, plant
More informationENGINEERED SOLUTIONS COMPANY PROFILE
TEi Services Pty Ltd ENGINEERED SOLUTIONS COMPANY PROFILE COMPLETE SOLUTIONS TEi Services works with leading companies to provide quality assured engineered solutions for INFRASTRUCTURE Structural & Piping
More informationSUEZ. committed together to water a source of life
committed together to water a source of life Who we are 3 Our four core services 4 Solutions for municipal water authorities 6 Solutions for industries 7 Current projects and contracts 8 Our commitments
More informationCAPABILITY STATEMENT. GE GROUP AUSTRALIA PETROCHEMICAL FABRICATION REPAIRS & MAINTENANCE MACHINING
CAPABILITY STATEMENT www.gegroupaust.com.au GE GROUP AUSTRALIA PETROCHEMICAL FABRICATION REPAIRS & MAINTENANCE MACHINING Committed to Specialist Knowledge & Extraordinary Outcomes OVERVIEW GE GROUP AUSTRALIA
More informationQuality Handling Systems Pty Ltd. Sampling Solution Specialists. Sampling Systems for Bulk Materials
Quality Handling Systems Pty Ltd Sampling Solution Specialists 1 Sampling Systems for Bulk Materials 2 Quality Handling Systems Pty Ltd www.qhs.com.au Contents 3 Our Mission Our Services Our Experience
More informationwww.dixiesouthern.com About Dixie Southern ASME Code Fabricator, Founded in 1976 Headquartered in Bradenton, FL Manufacturing Facility in Duette, FL 65,000 sq ft of Manufacturing Under-Roof Two Gulf Shipping
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationTEMPO AUSTRALIA INVESTOR PRESENTATION
TEMPO AUSTRALIA INVESTOR PRESENTATION ASX: TPP MAY 2016 DISCLAIMER AND FORWARD LOOKING STATEMENTS This Presentation is provided by Tempo Australia Ltd (the Company). You should not rely upon anything in
More informationAppendix A: Project Characteristics
Gorgon Fourth Train Expansion Proposal Appendix A: Project Characteristics Appendices Project Characteristics A Key Characteristics table has been prepared to describe the elements of the Foundation Project
More informationOpportunity Day 1 September New Force in Heavy Industries
Opportunity Day 1 September 2017 New Force in Heavy Industries Disclaimer: This presentation herein should be used for investor information only. It should not be used as an offer or invitation to purchase
More informationWho We Are. Located near Port, Rail and Road transportation links, Maritime Welding Inc. can deliver world-class steel fabrication services worldwide.
Who We Are Maritime Welding Inc., established in 1969, is a fully equipped metal fabricating shop staffed by a well trained flexible and knowledgeable workforce. Our shop located in Northern New Brunswick
More informationSelection of Stainless Steels for Nuclear Applications
Selection of Stainless Steels for Nuclear Applications Andrew Backhouse Technical Manager Outokumpu Stainless ** Technical advice and assistance is provided without charge and in good faith without any
More informationThe Role of Mid-Tier Asset Management Contractors in Securing the Energy Future of Australia
The Role of Mid-Tier Asset Management Contractors in Securing the Energy Future of Australia Presented by: Ankur Barua Group Oil & Gas Manager, Orontide Presentation to Australasian Oil & Gas Conference
More informationSOLUTIONS, AS SOLID AS STEEL
AN ISO 9001-2008 CERTIFIED COMPANY Al Qaser Steel Fabrication Solutions SOLUTIONS, AS SOLID AS STEEL MILD STEEL FABRICATION STAINLESS STEEL FABRICATION ALUMINIUM FABRICATION About Us Al Qaser Fabrication
More informationENGINEERING SERVICES
ENGINEERING SERVICES www.elb.co.za Bulk Materials Handling ABOUT ELB ENGINEERING SERVICES ELB Engineering Services (ELB) is an internationally recognised technology driven holistic solutions provider to
More informationThe cost of quality. Metals Conference Dr Michail Karpenko General Manager NZWC, HERA Alan McClintock Senior Welding Engineer, HERA
Metals Conference 2017 The cost of quality Dr Michail Karpenko General Manager NZWC, HERA Alan McClintock Senior Welding Engineer, HERA The New Zealand submarine Platypus The Platypus was designed by Monsieur
More informationGAS. POWER. WATER. TELCO. WATER
GAS. POWER. WATER. TELCO. WATER Roof construction, Oddie Reservoir Who is Zinfra? Zinfra is a leading water, gas, power and telco infrastructure service provider. We offer a comprehensive range of engineering,
More informationGorgon Project Update: Selected Images
Gorgon Project Update: Selected Images September 25, 2012 Plant Site Construction of the liquefied natural gas (LNG) plant is progressing well. Once complete, the plant will comprise three trains capable
More informationMetro Contract Services
Industrial Solutions TABLE OF CONTENTS ABOUT US 2-3 TURNKEY MILLWRIGHT & RIGGING MECHANICAL FABRICATION GRAIN INDUSTRY SOLUTIONS ENGINEERING 4-5 6-7 8-9 10-11 12-15 16-17 AboutUs At our goal is to provide
More informationMETAL PRODUCTS PIPELINE ENGINEERING. Engineered Products for the Pipeline Pigging and Flow Assurance Industry
METAL PRODUCTS 1 2 3 PIPELINE ENGINEERING Engineered Products for the Pipeline Pigging and Flow Assurance Industry Engineered Products for the Pipeline Pigging and Flow Assurance Industry Pipeline Engineering
More informationINDUSTRIAL FABRICATION & MODULARIZATION
INDUSTRIAL FABRICATION & MODULARIZATION AECON FABRICATION As one of North America s largest pipe and custom steel fabricators and module erectors, Aecon knows how to deliver. We fabricate for virtually
More informationSeaSMART* SWRO desalination concept
Water Technologies & Solutions capability profile SeaSMART* SWRO desalination concept proven experience and sustainable solutions you expect why choose SUEZ water technologies & solutions? With over 50
More informationENDURACLAD INTERNATIONAL PTY LTD. Head Office: 41 Roscoe Street, Henderson WA Phone: (08)
ENDURACLAD INTERNATIONAL PTY LTD Head Office: 41 Roscoe Street, Henderson WA 6166 Phone: (08) 9437 4506 E-mail: sales@enduraclad.com.au j Where Quality follows Integrity ENDURACLAD INTERNATIONAL PTY LTD
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationBall Charging & Grinding Media Handling
Ball Charging & Grinding Media Handling Automatic Safe Sorting and Handling of Grinding Media in the Range 27mm to 150mm Diameter. EQUIPMENT Company Profile Australian Engineering Worldwide Transmin is
More informationSize Reduction Specialists
Size Reduction Specialists Franklin Miller Inc. is a leader in size reduction technology. For three generations we have been designing and building size reduction processors to meet or exceed our customers
More informationTRI-M Mecano Metal de Moçambique
Our Vision is to have a competitive advantage through our combined management and work force. Our Mission is to deliver quality service agreements, engineering services and labour on a continuous basis,
More informationTURNKEY MECHANICAL PROJECTS
TURNKEY MECHANICAL PROJECTS Presentation Contents 1 Introduction 2 Products and Services 3 Dickinson Mechanical Projects 4 Scope of Projects 5 Business Alliances 6 Package Benefits and Partnership Introduction
More informationCapability Statement
Capability Statement Business Overview Still Engineering is based in Bathurst, NSW. The company was founded in 2005 and is established as a highly reliable engineering company offering small and large
More informationWater Treatment Solutions
Water Treatment Solutions About Us Transvac Systems Limited is a privately owned Ejector Solutions provider formed in 1973. As both a designer and a manufacturer of Ejectors, Transvac has full inhouse
More informationINVESTING IN AFRICA. Company Profile
INVESTING IN AFRICA civicon Company Profile Executive Summary Civicon Limited was founded in 1975 and is the le eading engineering contractor in Eastern Africa The company provides EPC and turnkey approach
More informationEXPERTS IN TANK CONSTRUCTION
EXPERTS IN TANK CONSTRUCTION EXPERTS IN TANK CONSTRUCTION Upgrade Storage is a construction company and turnkey installer of industrial, large size tanks and silos used for the handling, processing and
More informationENGINEERING CAPABILITY STATEMENT
AWMA Pty Ltd ENGINEERING CAPABILITY STATEMENT Contact: Hugh Watson AWMA Engineering Manager +61 3 5456 3331 hugh@awmawatercontrol.com.au 0 AWMA Design and Manufacture Specialised Control Infrastructure
More informationA World of Solutions Visit Product Storage Terminals for Bulk Liquids
A World of Solutions Visit www.cbi.com Product Storage Terminals for Bulk Liquids United Arab Emirates The most global experience of any tank company CB&I has more than eight decades of experience designing
More informationGUIDE TO STAINLESS STEELS AND DESALINATION
GUIDE TO STAINLESS STEELS AND DESALINATION 1.0 DESALINATION: AN OVERVIEW. Water, water everywhere, nor any drop to drink. 71% of the Earth s surface is covered by water but of this 96.5% is found in seas
More informationPowder Dosing Solutions
Powder Dosing Solutions About Us Transvac Systems Limited is a privately owned Ejector Solutions provider formed in 1973. As both a designer and a manufacturer of Ejectors, Transvac has full inhouse control
More informationStratus Development in Joint Venture with Middle East Petroleum Services (Offshore) SAL
Stratus Development in Joint Venture with Middle East Petroleum Services (Offshore) SAL Stratus Development in Joint Venture with Middle East Petroleum Services (Offshore) SAL is a service, general trading
More informationCONTAINMENT. Container Liners.
CONTAINMENT Container Liners sales@plascorp.com.au The Company s manufacturing history goes back over fifty years with the introduction of the Plasticoat range of industrial coatings and flexible ducting
More information...YOUR RELIABLE STEEL PARTNER
...YOUR RELIABLE STEEL PARTNER MADESTA about Madesta is a steel trading and service company, with production facilities located in Ukraine. The company was established in 2000 as a steel trader and has
More informationTrust is critical to the success of any multi-trade contractor. At the Laframboise Group, we earn trust by guaranteeing satisfaction with every job.
Trust is critical to the success of any multi-trade contractor. At the Laframboise Group, we earn trust by guaranteeing satisfaction with every job. Founded in 1964, the Laframboise Group is one of eastern
More informationGLOBAL SOURCE GLOBAL SUPPLY
MAJOR MANUFACTURERS RELIABILITY IN SUPPLY Sferova s production capability includes forged API6D Ball valves Australian Pipeline Valve (APV) manufacture Ball, Gate, Globe, in sizes 15NB through 1000NB (1/2
More informationAbout us. A proudly Western Australian owned Services company, SMS Group offers a full range of services including:
About us Scaffolding Management Services was formed by the Welsh family in Western Australia in 2001. Since then, SMS has rapidly expanded to deliver a range of services to the commercial, industrial and
More informationAbout Us. Established in 2000 to specialize in Heavy Lift & Project Logistics for Oil & Gas, Mining, renewable Energy & other Heavy Industries
About Us Established in 2000 to specialize in Heavy Lift & Project Logistics for Oil & Gas, Mining, renewable Energy & other Heavy Industries CEA is dedicated to providing a high level of service that
More informationTotal technology solutions for mining and bulk materials handling
Total technology solutions for mining and bulk materials handling Tenova is a worldwide supplier of advanced technologies, products and engineering services for the mining and metals industries. PRODUCTS
More informationintroduction Introduction.1 contents Irrigation Warehouse Group Pty Ltd Ph
contents Vinidex the Company 3 Quality Policy 3 Product Background 4 Worldwide Use 4 Australian Use 4 Pipe Extrusion 5 Fittings 6 End Treatments 6 Product Standards 7 Relevant Australian Standards 7 Introduction.1
More informationOrmonde Offshore Wind Farm
Ormonde Offshore Wind Farm Pile grouting for 31 four-legged jacket foundations in the Irish Sea, 10km off Barrow-In-Furness. Subsea and offshore grouting for the global energy construction industries FoundOcean
More informationFremantle Constructions
Fremantle Constructions CAPABILITY STATEMENT Small enough to listen, Big enough to deliver p: +61 9359 3589 e: admin@fremantleconstructions.com.au w: www.fremantleconstructions.com.au Our mission is to
More informationTravers Welding & Fabrication Ltd
Travers Welding & Fabrication Ltd Carbon Steel, Stainless Steel & Aluminium Welding & Fabrications Manor Farm, Sandridge Common, Melksham, Wiltshire. SN12 7QT Tel/Fax 01225 706111. Mobile - 0781 728 5985
More informationPurified Water Systems
TM Purified Water Systems TM Purified Water Systems A choice of quality Telstar-Puretech introduce the Oasys, opening a new chapter in pure water delivery. Telstar-Puretech Oasys Purified water systems
More informationWe provide RPEQ/CPEng Certificates of compliance and certification plates for the following equipment:
Practical Engineering Australia is a Brisbane based mechanical, structural and process engineering firm specialising in design, inspection, certification, project management and construction. We provide
More informationService Capability. Transmin provides world class supply and service solutions to a wide range of industries and sub-sectors.
Repair work for a mineral sizer shaft Service Capability Transmin provides world class supply and service solutions to a wide range of industries and sub-sectors. SERVICE Company Profile Australian Engineering
More informationTUNNEL BORING MACHINE & AUXILIARY EQUIPMENT ELECTRICAL CAPABILITY EPS AUSTRALIA. Suite 1702, Tower 2, 101 Grafton St, Bondi Junction NSW 2022
Suite 1702, Tower 2, 101 Grafton St, EPS AUSTRALIA TUNNEL BORING MACHINE & AUXILIARY EQUIPMENT ELECTRICAL CAPABILITY Suite 1702, Tower 2, 101 Grafton St, EPS is a recognised company specialising in Electrical,
More informationMEMBER REZAYAT GROUP OF COMPANIES
KHOBAR OFFICE : P.O. Box 328, Al Khobar 31952 Tel. No.+966-03-882-7068/7235/5700, Fax No.+966-03-882-5193 Saudi Arabian Fabricated Metals Industry Co. Ltd. JUBAIL OFFICE : P.O. 10018, Jubail Indt l City
More informationWear Plate & Block. Duablock Products Catalogue. Our Innovation. Your Advantage.
Wear Plate & Block Duablock Products Catalogue Our Innovation. Your Advantage. Bradken s Duablock products are a composite material comprising of a chromiummolybdenum, abrasion resistant, white iron casting,
More informationASX / MEDIA ANNOUNCEMENT 5 March 2018
ASX / MEDIA ANNOUNCEMENT ASX: NCZ 5 March 2018 NEW CENTURY EXECUTES A$40M EPC CONTRACT WITH SEDGMAN FOR RESTART OF MINE & PORT AND SELECTS AUSENCO AS PREFERRED BIDDER FOR A$1.7M PIPELINE REFURBISHMENT
More informationWorld Class NQA-1 Fabrication
World Class NQA-1 Fabrication To Su p p ly Sup e r i o r Pr o d u c t s a n d Se r v i c e s a t a Competitive Pri c e wi t h Integrity Our Project List Includes: Agitators & Seismic Bumpers Bi-Cell Tanks
More informationCAPABILITY STATEMENT 0 P a g e
CAPABILITY STATEMENT 2016 WWW.SURVEYGROUP.COM.AU 0 P a g e Contents ABOUT SURVEY GROUP... 2 About Survey Group... 2 Who We Are... 2 OUR CAPABILITY... 2 Our Commitment to Quality... 4 Our Commitment to
More informationCOMPANY PROFILE FOR. Workforce Group of Companies. Prepared by
COMPANY PROFILE FOR Prepared by Workforce Group of Companies Western International Oil & Gas Limited is 100% nationally owned company. The company Comprises of three (3) nationally owned companies that
More informationDemitec RO systems. Reverse Osmosis water maker series for Maritime & Offshore market.
Demitec RO systems Reverse Osmosis water maker series for Maritime & Offshore market. Hatenboer-Water Fresh in water since 1906. Water treatment & services With specialist expertise, in-house engineering,
More informationApproved Code of Practice Under the Hazardous Substances and New Organisms (HSNO) Act 1996
New Zealand Timber Preservation Council P O Box 308 WELLINGTON Code of Practice for the Management of Existing Stationary Container Systems at Timber Treatment Facilities Approved Code of Practice Under
More informationPlatform Construction and Installation
Platform Construction and Installation Platform Construction and Installation UK Construction Yards. Worldwide Construction. Construction Quality and Safety. Construction Risks. Offshore Installation.
More informationPower & Water. Water. Power & Energy. water treatment
aquamarine Power & Energy Water water treatment OVERVIEW POWER & WATER The platform is focused on engineering, procurement, construction and management of power, water, mineral beneficiation and industrial
More informationFABRICATION. Global Energy Partners. Putting People First Since The Right Choice. The Right Solutions. The Right Safety. The Right Performance
Global Energy Partners FABRICATION Putting People First Since 1948 Safety People Solutions Performance Choice FABRICATION HIGHLIGHTS Putting People First Since 1948 SPOOL PIPE FABRICATION Shop fabrication
More informationResource corridors: A case study of the Pilbara, Australia
Supporting sustainable resources development Resource corridors: A case study of the Pilbara, Australia Ian Satchwell 29 October 2012 Outline Overview of the Pilbara History of Pilbara development Key
More informationnalcofabtech.com A Nalco Champion Company
nalcofabtech.com A Nalco Champion Company 2 CONTENTS Goal Zero - Safety Culture...4 About Us...6 Capabilities...8 Services...24 Equipment and Facilities... 36 3 4 At Nalco FabTech, our programs ensure
More informationCapability Statement Gas and liquid bulk terminals Delta Marine Consultants
Capability Statement Gas and liquid bulk terminals Delta Marine Consultants Delta Marine Consultants Delta Marine Consultants provides comprehensive maritime engineering services for gas and liquid bulk
More informationPrice: ConvaTech imports directly from Sempertrans ensuring a high quality and most importantly, highly supported product at a competitive price.
Conveyor Belt CS1 With over 30 years experience in the materials handling industry ConvaTech is widely recognised as Australia s leading supplier of conveyor services and products. We offer a Total Conveyor
More informationCOURSES IN DESALINATION
European Desalination Society COURSES IN DESALINATION Genoa University Department of Chemistry and Industrial Chemistry Genoa, Italy June 24 25, 2013 Thermal Desalination June 26, 2013 Material Selection
More informationSouthern Seawater Desalination Plant. Marine Environmental Monitoring Interim Report 19 July October 2015
Southern Seawater Desalination Plant Marine Environmental Monitoring Interim Report Executive Summary The Southern Seawater Desalination Plant (SSDP) is located on Taranto Road, Binningup. Stage 1 of the
More informationWelding Alloys Group. WA Hardlite Ultra-thin composite wearplates
Welding Alloys Group WA Hardlite Ultra-thin composite wearplates Success through innovation This brochure presents the features of composite Hardlite wear plate, from the manufacturing process, the wear
More informationfrom ENGINEERING up to the complete PLANT, ALL from a single SOURCE MULTI Kühlsysteme GmbH Zschorlauer Straße Aue/Saxony GERMANY
from ENGINEERING up to the complete PLANT, ALL from a single SOURCE Location Company building Multi Kühlsysteme GmbH Zschorlauer Strasse 56 D-08280 Aue / Saxony GERMANY Phone: + 49 3771 24 67 0 Telefax:
More informationAECON POWERS THE INDUSTRY
POWER GENERATION AECON POWERS THE INDUSTRY For nearly a century, Aecon has worked on numerous power generation projects, from hydroelectric to nuclear plants to the latest in solar power. And over the
More informationPurified Water Systems
Purified Water Systems Purified Water Systems A choice of quality Telstar-Puretech introduce the Genesys, opening a new chapter in pure water delivery. Telstar-Puretech Genesys Purified water systems are
More informationMINERAL RESOURCES LIMITED
MINERAL RESOURCES LIMITED QUARTERLY EXPLORATION AND MINING ACTIVITIES REPORT OCTOBER TO DECEMBER Q2 FY2017 MINERAL RESOURCES LIMITED QUARTERLY EXPLORATION AND MINING ACTIVITIES REPORT OCTOBER TO DECEMBER,
More informationBlast It Global Pty Ltd PO Box 210, Cloverdale WA 6985 ACN: ABN: Ph:
Blast It Global Pty Ltd PO Box 210, Cloverdale WA 6985 ACN: 168 728 596 ABN: 13 168 728 596 drew@blastitglobal.com Ph: 0477 339 648 Drew Martin Principal Drill & Blast Engineer BEng (Mining Engineer) (Hons)
More informationSarens Australia Mobile Crane Division: Personnel and Services
Perth - Australia Sarens Australia Mobile Crane Division: Personnel and Services Personnel Committed to our promise: go the extra mile! Assessment, VOC training and mandatory safety toolboxes Crane driving
More informationCP DESIGN OF A SUPER 13% CR FLOWLINE. Are Sjaastad and Harald Osvoll FORCE Technology Norway AS Hornebergveien Trondheim Norway
CP DESIGN OF A SUPER 13% CR FLOWLINE Are Sjaastad and Harald Osvoll FORCE Technology Norway AS Hornebergveien 7 7038 Trondheim Norway Olav Jan Hauge and Rolf E. Lye Norsk Hydro ASA Norway Guy Bärs Technip
More informationDRY BULK CARGO HANDLING
Protecting Industry Worldwide FACT FILE DRY BULK CARGO HANDLING Shared knowledge Kingfisher have been active in the dry bulk cargo shipping and handling industry for over 20 years. Throughout that time
More informationInland Technologies Inc
Inc Evaluation of the Mono-ethylene Glycol [MEG] Concentrator to Recycle MEG used in Hydrate Prevention March 2007 Document Nr 0035_INL-OPT-REP-001 Client : Inland Technologies Inc Project : Evaluation
More informationSECTION 1: INTRODUCTION 1.1 BACKGROUND TO THE PROJECT
SECTION 1: INTRODUCTION 1.1 BACKGROUND TO THE PROJECT Transnet is a State-owned Enterprise (SOE) under the National Department of Public Enterprises (Public Finance Management Act, Act No. 29 of 1999).
More informationPhoto Courtesy of Jason Pineau Photography MINING SERVICES
Photo Courtesy of Jason Pineau Photography MINING SERVICES 5000+ PIECES OF EQUIPMENT WITH A REPLACEMENT VALUE OF $1 Billion 82 HYDRAULIC EXCAVATORS up to 550-ton class 110 HEAVY HAUL TRUCKS up to 250-ton
More informationNEW Septic Tank Access Saddle
NEW Septic Tank Access Saddle The superior lightweight alternative to the traditional concrete riser weighs only 22kgs and tested to withstand 1.5 tonnes (15Kn) Weight for weight stronger than concrete
More informationMajor Pipe Jacking for Perth Desalination and Main Sewer Projects
Major Pipe Jacking for Perth Desalination and Main Sewer Projects Oliver, M.I. 1, Boland, D. 2, MacCormick, M.J. 3, Bower, J.C. 4 1 Water Corporation, Perth, Western Australia 2 GH&D Pty Ltd, Perth, Western
More informationCOURSES IN DESALINATION
European Desalination Society COURSES IN DESALINATION Genoa, Italy June 18 19, 2012 Thermal Desalination June 20, 2012 Material Selection in Desalination June 21 22, 2012 Water Management and Economics
More informationLow Profile Feeder TM (LPF)
Low Profile Feeder TM (LPF) Deliver a True Space-Saving Performance. Increase Efficiency, Whilst Reducing Capital Costs. Search Low Profile Feeder EQUIPMENT Company Profile Australian Engineering Worldwide
More informationARCOPLATE TM. The World s most Wear Resistant Fused Alloy Steel Plate YOUR GUARANTEE AGAINST WEAR HANG UP CARRY BACK
ARCOPLATE TM The World s most Wear Resistant Fused Alloy Steel Plate YOUR GUARANTEE AGAINST WEAR HANG UP CARRY BACK Operating for over 25 years. An Australian Independent, International company. ARCOPLATE
More informationINTELLIGENT & WIDESPREAD SOLUTIONS FOR YOUR LSAW PIPE REQUIRE MENTS
LSAW PIPE INTELLIGENT & WIDESPREAD SOLUTIONS FOR YOUR LSAW PIPE REQUIRE MENTS CIMTAS PIPE FABRICATION AND TRADING LTD. CO. INTEGRATED PIPING SOLUTIONS MILESTONES Over 100 Major Projects Over 200,000 Tons
More informationNambeelup, Western Australia.
Nambeelup, Western Australia. PERTH Perth Airport (Domestic/International) N ROTTNEST ISLAND Legend The Peel Region. WESTERN AUSTRALIA Fremantle Port FREMANTLE Kwinana Port ROCKINGHAM Kwinana Freeway Jandakot
More informationWater Solutions for the Mining Industry
Water Solutions for the Mining Industry Reliable Mining Expertise EXPERIENCED. From the extreme heat of remote Australia and Africa, to the cold climates of Mongolia and Kazakhstan, MAK Water has delivered
More informationRegd. Office: L&T House, N. M. Marg, Ballard Estate, Mumbai INDIA
CBMC06/2016/RP/Domestic Rev.2 EWAC Alloys Limited (A wholly owned subsidiary of Larsen & Toubro Limited) L&T Business Park, Tower - B, TC - II, 5th Floor, L&T Gate No. 5, Powai Campus Saki-Vihar Road,
More information