I just want to say one word to you... just one word... Plastics. -the graduate
|
|
- Griffin Oliver
- 5 years ago
- Views:
Transcription
1 I just want to say one word to you... just one word... Plastics -the graduate
2 Budget! $ CYAN TEAM GREEN TEAM PERIWINKLE TEAM BLUE TEAM PURPLE TEAM AMBER TEAM MAGENTA TEAM CORAL TEAM PEWTER TEAM YELLOW TEAM RED TEAM ORANGE TEAM CHARTREUSE TEAM ONYX TEAM
3 Budget! $1000 average to date = $ CYAN TEAM GREEN TEAM PERIWINKLE TEAM BLUE TEAM PURPLE TEAM AMBER TEAM MAGENTA TEAM CORAL TEAM PEWTER TEAM YELLOW TEAM RED TEAM ORANGE TEAM CHARTREUSE TEAM ONYX TEAM
4 What are Polymers? greek for many parts long chains of repeating molecules (monomers) natural polymers: proteins, starch, cellulose synthetic polymers...
5 What is Plastic? synthetically polymerized material... typically from hydrocarbons from crude 6-10 percent of U.S. oil consumption - approximately 2 million barrels a day * green plastic oil can * lawrence livermore, 2004; metabolix 2007
6 Thermoplastics vs Thermosets THERMO (heat) PLASTIC (deform) THERMO (heat) SET (permanent)
7 Thermosets melamine Permanent, Chemical Reaction! Polymer Chains are cross-linked. Usually two-part exothermic, or heat treated phenolics Used in for high temp, high tolerance, or joining not recyclable. vulcanized rubber
8 Thermoplastics most common with toys easy to (re)shape with different processes. chains relax mostly recyclable 9 common thermoplastics Acrylonitrile-Butadiene-Styrene (ABS) PolyVinyl Chloride (PVC) PolyPropylene (PP) PolyEthylene (PE) PolyStyrene (PS) PolyMethylMethArylate (Acrylic) PolyCarbonate (PC) PolyEsters (PET, PETE) PolyAmide (Nylon, PA)
9 Plastic Shaping Processes pdes 3706 designing for manufacture (spring) Compression Molding (thermosets) Injection Molding Thermoforming Blow Molding Rotational Molding
10 Compression Molding for complex parts with various thickness thermosets
11 Injection Molding for thin constant thickness parts gate, parting lines, ejector pins mass production, molds are expensive
12 Thermoforming glass transition, relaxing the chains for thin sheets, simple one sided forms
13 Blow Molding for open thin walled hollow parts milk jugs, most bottles
14 Rotational Molding for simple closed hollow shapes good for inexpensive large parts
15 Crazing network of small voids or cracks strain whitening
16 Thermoplastics Acrylonitrile-Butadiene-Styrene (ABS) PolyVinyl Chloride (PVC) popular toy plastics PolyPropylene (PP) PolyEthylene (PE) ABS PVC PP PE PolyStyrene (PS) popular clear plastics PolyMethylMethArylate (Acrylic) PolyCarbonate (PC) PolyEsters (PET, PETE) PS PMMA PC PET PolyAmide (Nylon, PA)
17 Thermoplastics Game popular toy plastics Physical Properties: feel, look, smell, density, stiffness, opacity, surface finish ABS PVC PP PE popular clear plastics Manufacturing Properties: What are the processes used with this plastic? thickness, detail, size? PS PMMA PC PET Design Considerations: Which types of products use this plastic? What is the cost of these products?
18 ABS Hard with high impact resistance Takes color well with excellent surface finish Consumer product cases Most expensive out of PVC, PP, PE
19 PolyVinylChloride (PVC) cheap, heavy, rigid, durable but not tough without plasticizers vinyl designer toys - not constant thickness outdoor/water products characteristic smell environment concerns
20 PolyEthylene (PE) most common plastic HDPE, LDPE cheap, very flexible, easy to (blow) mold, less dense than water waxy feel, milky, crazes highly resistant to food, water, salt, chemicals
21 PolyPropylene (PP) VERY similar to PE but... a bit more rigid doesn t fatigue: hinges, snaps shinier surface with better color acceptance harder to scratch and craze
22 Compare ABS, PVC, PP, PE ABS PVC PP PE Hard Colorful Strong Durable/Gummy Flexible* Unique shapes No Fatigue Tough Shiny Surface Flexible Food/Chemical Safe Waxy Stiff Flexible High $ Low $ Nicest Finish Worst Finish
23 Polystyrene (PS) clear, hard, cheap, brittle, tinny sound typically foamed to Styrofoam good for lightweight insulation if it cracks or crazes easily
24 PolyMethylMethAcrylate PMMA, Acrylic, Plexiglass transparent like glass, hard, brittle, but stronger than PS great for laser cutting can weld with superglue PMMA particles suspended in water
25 Polycarbonate (PC) the engineering plastic expensive, extremely tough and rigid... and clear
26 Polyesters (PET, PETE) cheap, transparent, easy to blow mold food products, barrier to moisture tough, able to withstand high pressures easy to recycle, require less energy than glass bottles
27 Compare PS, PMMA, PC, PET PS Acrylic PC PET tin sound brittle light weight glass like less brittle tough hard water proof tough blow mold Brittle Strong Low $ High $
28 Quiz 1. Identify the plastic that makes up the majority of each toy piece. 2. What makes you think it is that plastic? / Why was that plastic used?
29 Plastic Recycling not everything gets recycled (even if it s recyclable) collecting air, sorting, shredding, cleaning processing 80% is sent to landfill 8% is incinerated 7% is recycled * * 2001 Environment Agency report
30 Paper vs. Plastic 2 plastic bags use 13% less energy to make than one paper bag and produce 72% less pollutants than one paper bag but do not degrade and come from a non renewable resource * institute for lifecycle environmental assessment
31 Logistics ONLY 3 Weeks left! Peer review? Play testing Wednesday PLAYsentations are Wednesday May 2nd, 6pm, Coffman Theatre Rehearsal is Monday Apr 30th, pm, Coffman Theatre (30 min slots) Presentation Consultations: April 23 and 25 in Rapson 37 (Bring 3 ideas) (Kate Maple and Chris Schlichting) Keynote PLAYsentations guidelines Monday lecture Study Abroad? Toy Product Design v. Consumer Product Design
32 ben krause
33 Questions
I just want to say one word to you... just one word... Plastics. -the graduate
I just want to say one word to you... just one word... Plastics -the graduate Quiz! 1. What is your name? 2. Which are polymers: wood, skin, Jell-O, DNA 3. Where does almost all plastic come from? 4. Which
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Polymers Unit 3 Materials and their working properties 4 Objectives Know the primary sources of materials for producing polymers Be able to recognise and characterise
More informationUnderstanding the Basics of Plastic Materials and the IAPD Thermoplastics Rectangle. Prepared by the IAPD Education Committee (Module 2)
Understanding the Basics of Plastic Materials and the IAPD Rectangle Prepared by the IAPD Education Committee (Module 2) Key Characteristics: Very High Cost Per Pound Excellent Properties Above 400 F Excellent
More informationChapter 15: Characteristics, Applications & Processing of Polymers
Chapter 15: Characteristics, Applications & Processing of Polymers What are the tensile properties of polymers and how are they affected by basic microstructural features? Hardening, anisotropy, and annealing
More informationPLASTICS. Chapter 5. Materials of Construction-Plastics 1
PLASTICS Chapter 5 Materials of Construction-Plastics 1 Plastics Plastics are synthetic materials which are composed of high molecular weight substances consisting of macromolecules of colloidal dimensions.
More informationChapter 15: Characteristics, Applications & Processing of Polymers
Chapter 15: Characteristics, Applications & Processing of Polymers Study: 15.1-15.14 Read: 15.15-15.24 What are the tensile properties of polymers and how are they affected by basic microstructural features?
More informationFACTFILE: GCSE Technology and Design
FACTFILE: GCSE Technology and Design UNIT: 1.2 MATERIALS AND THEIR GENERAL PHYSICAL, AESTHETIC AND STRUCTURAL CHARACTERISTICS Thermoplastics Learning Outcomes You should be able to: demonstrate understanding
More informationPolymers Chemistry in Context, Chapter 9 Polymers and Fibers http://www.youtube.com/watch?v=psxihhbzcjk Some Definitions Polymer large molecules made of long chains of atoms, typically hundreds to thousands
More informationChapter 15: Characteristics, Applications & Processing of Polymers (1)
Chapter 15: Characteristics, Applications & Processing of Polymers (1) ISSUES TO ADDRESS... What are the tensile properties of polymers and how are they affected by basic microstructural features? Hardening,
More informationPS-101 Preparing for Your Success
PS-101 Preparing for Your Success The Pressure-sensitive Label Construction Module 4: Adhesives Pressure-Sensitive Adhesive Features Coating Technology Adhesive Chemistry Adhesive Selection Criteria &
More informationMDF. Man Made Sheet Based Materials
Man Made Sheet Based Materials MDF MDF boards are produced by tiny particles of timber glued together and then compressed with a resin adhesive. MDF can be easily damaged by moisture. MDF does not contain
More informationDesign Guidelines. Approximate Projected area guidelines. 510 square centimetres square centimetres
Design Guidelines Size Our maximum moulding size is approximately 500mm x 500mm x 200mm but should not exceed the maximum projected area shown in the example materials table. (Figure 1) Maximum material
More informationPlastic Assembly Technologies, Inc Castlewood Drive, Suite B, Indianapolis, IN 46250
DESIGN FOR ULTRASONIC WELDING Energy Director Design While it is possible to ultrasonically weld plastic materials without specific joint design details, the weld process is greatly enhanced by adding
More informationContents. Definition Structure Manufacturing Proses Applications Properties Recycling
Contents Definition Structure Manufacturing Proses Applications Properties Recycling Definition Poly(propylene) (PP) is a recyclable thermoplastic addition polymer made from the combination of propylene
More informationA Mr BTec Book. Plastics
A Mr BTec Book Plastics 3 Plastics 25 recycled bottles are enough to make one pupil blazer. Anon What are Plastics? Plastics are the most widely used material in commercial production. Plastics can be
More informationEMEA Supplies Compliance Overview. Contents
EMEA Supplies Compliance Overview This document will provide a quick overview of common compliance relating to EMEA Supplies products. Compliance covered in this document includes food contact approvals
More informationPLASTIC PIPE TERMS & DEFINITIONS
PLASTIC PIPE TERMS & DEFINITIONS Every product has certain terms and definitions that are unique to that particular product. Listed below are some of the more common terms and definitions that relate to
More informationClassification of polymers. Classification of polymers. Classification of polymers. Shrinkage. Properies. 02 Plastic materials Mould design project
Dr. Mikó Balázs miko.balazs@bgk.bmf.hu Classification of polymers BAGIM1ENNB Design and manufacturing of plastic injection mould Natural based polymers Polymers Macromolecular organic matter Artificial
More informationPiXL Independence. Technology Answer Booklet KS4. Plastics Contents: Answers I. Multiple Choice Questions- 10 credits each
PiXL Independence Technology Answer Booklet KS4 Plastics Contents: Answers I. Multiple Choice Questions- 10 credits each II. III. Knowledge and Application 10 credits each Exam Style Questions 100 credits
More informationMathematics and Science in Schools in Sub-Saharan Africa
Mathematics and Science in Schools in Sub-Saharan Africa Material Science POLYMERS Each year, we produce millions of tons of garbage that are disposed of in landfills. I.T. s Superhighway Trash Yields
More informationVisualizing Material Properties in the Classroom
Visualizing Material Properties in the Classroom Compiled by Elisabeth Kahlmeyer and Claes Fredriksson from slides created by Mike Ashby M. F. Ashby, 2015 For reproduction guidance see back page This lecture
More informationINDUSTRIAL SHEETING SOLUTIONS Product Range & Sizes
INDUSTRIAL SHEETING SOLUTIONS Product Range & Sizes High Density Polyethylene (HDPE) PE Material has a very good chemical resistance and a high resistance to stress cracking against many organic and inorganic
More informationNEXT GENERATION. AAA Plastics
NEXT GENERATION We produce the finest sheets in our world-class facilities, backed by 35 years of expertise. Superior quality State of the art Logistic advantage Satish C Gadoya Chairman Sabin Engineering
More informationPE/PP/PET /PS/PVC/PPCP/PPR
Let Us Introduce Gulf Advanced Polymers LLC was established in 2016 with the aim to become one stop source for all kind of polymer requirements. We are engaged in the distribution and trading of Plastic
More informationNotes. air. oil. Resistant Materials Plastics. resins. granules. There are two basic types of plastic: thermosetting plastic and thermoplastic.
Resistant Materials Plastics Notes Plastics There are two basic types of plastic: thermosetting plastic and thermoplastic. Plastics are produced from the following ingredients Oil, Air, Water and Salt.
More informationMaterials and Manufacturing. Materials Modern Manufacturing Techniques Techniques for ME1720
Materials and Manufacturing Materials Modern Manufacturing Techniques Techniques for ME1720 This Week: Lecture Common Materials Basic Manufacturing Processes Tool Info and Demonstration Videos Lab Proof
More informationCaptains Tryouts Materials Science. Written by Araneesh Pratap (Chattahoochee High School GA)
Captains Tryouts 2017-2018 Materials Science Written by Araneesh Pratap (Chattahoochee High School GA) Instructions: 1. Write all answers on the Answer Sheet. Do not write on this Test Packet. 2. This
More informationDESIGN AND TECHNOLOGY
Year 8 DESIGN AND TECHNOLOGY TERM 2 LST / HOMEWORK LST: Your teacher will tell you how many LST questions you will need to revise. You will be tested at the beginning of every lesson. DUE DATES: Task 1
More informationSolidification Process(2) - Polymer Processing (Chapter 8, 12)
Solidification Process(2) - Polymer Processing (Chapter 8, 12) Seok-min Kim smkim@cau.ac.kr Plastic Products Plastics can be shaped into a wide variety of products: Molded parts Extruded sections Films
More informationMilitary Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C *MIL-P-997C MIL-P-997D Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset
More informationMilitary Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine
More informationSynthetic Petroleum-Based Polymers
Synthetic Petroleum-Based Polymers INTRODUCTION The synthetic polymer industry represents the major end use of many petrochemical monomers such as ethylene, styrene, and vinyl chloride. Synthetic polymers
More informationSolid Waste Special Service District #1
Solid Waste Special Service District #1 REFUSE, Then REDUCE REUSE or REPURPOSE Then RECYCLE Where does Plastic fit in the R Hierarchy? April 5, 2018 Plastic is Plastic Right? The first human-made plastic
More informationTO STUDY THE PARAMETERS OF FUEL FROM WASTE PLASTICS
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 4, April 2018, pp. 847 851, Article ID: IJMET_09_04_095 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=4
More informationChapter 15 Part 2. Mechanical Behavior of Polymers. Deformation Mechanisms. Mechanical Behavior of Thermoplastics. Properties of Polymers
Mechanical Behavior of Polymers Chapter 15 Part 2 Properties of Polymers Wide range of behaviors Elastic-Brittle (Curve A) Thermosets and thermoplastics Elastic-Plastic (Curve B) Thermoplastics Extended
More informationPROCESSING OF POLYMERS. Chapter 7
PRODUCTION TECHNIQUES (MANUFACTRING PROCESSES) ACADEMIC YEAR 94-95, SEMESTER ONE PROCESSING OF POLYMERS Chapter 7 Polymers: Structure, General Properties and Applications 1 Polymers Polymers and Plastics
More informationDiscover a highly transparent Thermoplastic for eye-catching Applications: STYROLUX 3G46
Discover a highly transparent Thermoplastic for eye-catching Applications: STYROLUX 3G46 1 Requirements in the Packaging Industry Styrolux 3G46 Visibility High transparency and gloss Good practical use
More informationISO ASTM ISO ASTM 294-1,2,3 D3641 D4703 D6289
ISO ASTM ASTM D955 D3641 D4703 D6289 D256 D4812 D6110 D638 D695 D785 D790 D882 D1043 D1044 D1822 D1894 D1938 D2990 D3763 D4065 D4092 D4440 D5023 D5026 D5045 D5083 D5279 D1239 D1693 Measuring Shrinkage
More information3. In the first simulation with 2 workers, how many total items are sorted in one hour?
Name: Date: Part I: Introduction 1. List 4 household items that can be recycled. 2. What is Single Stream Recycling? 3. What are three benefits of recycling? 4. What are three possible disadvantages of
More informationclear packaging welcome to easy media..
clear packaging welcome to easy media.. The Durable Packaging Our clear packaging is made from the finest quality of plastics (PVC, PET, RPET & PP etc.) which provides better and more consistent clarity,
More informationSPK Packaging Co.,Ltd
SPK Packaging Co.,Ltd Plastic packaging manufacturer in Southern Vietnam www.spk.com.vn 1 About SPK Packaging Co.,Ltd As a packaging company and one of the custom thermoformers in Southern Vietnam, SPK
More informationPolyethenic or vinyl resins
Polyethenic or vinyl resins Obtained by the polymerization of monomers containing the ethylenic bond (-c =c-) Important members of this type of resins are given below. (i) polyethylene (or) polythene:
More informationC2 - Material Choices Revision. Material Choices (C2) Revision for Exams
C2 - Material Choices Revision Material Choices (C2) Revision for Exams Properties of Materials When we decide which material to use, we have to think about the properties of the material. Polystyrene
More informationTAIEX Workshop on Packaging and package materialsmodern trends in food industry :
TAIEX Workshop on Packaging and package materialsmodern trends in food industry : 5. Oktober 2010 1 Index Generality ARCIL Group in a glance ARCIL FFS principle Cups production principles Plastic materials
More informationApplied Plastics Product Design - Workshop
Applied Plastics Product Design - Workshop Material Selection and Datasheet Interpretation October 12, 2006 Vishu Shah Consultek 1 Material Selection Process Understanding Material Basics Structure Properties
More informationTin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry
Tin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry Creating value for customer and consumer At SONGWON, we are passionate about people. Our committed teams work together with customers
More informationTin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry
Tin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry Creating value for customer and consumer At SONGWON, we are passionate about people. Our committed teams work together with customers
More information4 Plast. Switch on. Listening. The history and properties of plastics
4 Plast Switch on Look at the pictures of plastic products. Discuss why plastic has been chosen for each of these items. EXAMPLE Plastics are used for fuel tanks because they are resistant to chemicals.
More information3. In the first simulation with 2 workers, how many total items are sorted in one hour?
Name: Date: Part I: Introduction 1. List 4 household items that can be recycled. 2. What is Single Stream Recycling? 3. What are three benefits of recycling? 4. What are three possible disadvantages of
More informationInjection Molding APPENDIX A A.1 INTRODUCTION
APPENDIX A Injection Molding A.1 INTRODUCTION Injection molding is a process where solid plastic is melted, injected into a mold, and then cooled back to a solid as shown in Figure A.1. Plastic injection
More informationDoes the mandatory electricity savings target really prompt Taiwan s petrochemical industry to save more?
Does the mandatory electricity savings target really prompt Taiwan s petrochemical industry to save more? Industrial Technology Research Institute Wayne Lin ABSTRACT In 2015, the government of Taiwan executed
More informationOverview of Medical Polymers
Overview of Medical Polymers Polymer Pyramid Page 2 Crystalline & Amorphous Polymers Crystalline polymers Chemical structure that allows the polymer chains to fold on themselves and pack together in an
More informationPhysical Properties of Polymers
Physical Properties of Polymers Objective: The objective of this experiment is to test and compare the physical properties of thermoplastic polymers. Review of Scientific Principles: Plastics are long
More informationHandbook of. Antiblocking, Release, and Slip Additives. 3rd Edition. George Wypych. <e> ChemTec Publishing
Handbook of Antiblocking, Release, and Slip Additives 3rd Edition George Wypych ChemTec Publishing Toronto 2014 "Table of Contents 1 Introduction 1.1 Historical developments 1.2 Expectations from commercial
More information2/19/2009. Plastics History. Plastics type INTRODUCTION. Thermosets RM1565 MOULD DESIGN. Generalproperties: more durable, harder, tough, light.
INTRODUCTION RM1565 MOULD DESIGN bpram Plastics History Plastics type Thermosets Generalproperties: more durable, harder, tough, light. Typical uses: automobile parts, construction materials. Unsaturated
More informationPolymers. Historical Classification
Polymers The term polymer implies many "mers" or the building blocks...similar to the unit cell in metals. A polymer is a chemical compound or mixture of compounds formed by a process called polymerization,
More informationNACD.NET 2 TABLE OF CONTENTS
NACD.NET 1 NACD.NET 2 TABLE OF CONTENTS 3 4 4 5 7 8 9 11 12 14 PLASTICS: A BRIEF HISTORY AND WHERE WE ARE TODAY KEY PLASTC TERMINOLOGY T SIX PLASTICS THAT DOMINATE THE INDUSTRYO LOOK FOR IN 2015 HDPE -
More information5.1 Essentials of Polymer Composites
5 Polymer Composites Polymer modification can follow from the mixing of two or more macromolecular compounds or their filling with reinforcing materials of inorganic or organic substances. It enables the
More informationPractical Rheology Section 1
Practical Rheology Section 1 Plastics and Polymers Names and Abbreviations for Plastics Thermoplastic Materials Polymers Additives used with Plastics Melt Processes and Thermoplastic Behavior 2 3 5 6 9
More informationPLASTICS AND ELASTOMERS
PLASTICS AND ELASTOMERS Application Examples Household appliances For packing, containers For housing & bodies of machines Insulator for electrical devices Fillers foams Household articles, furniture Composites
More informationThe Ultimate Guide To The 3D Printer Filament
The Ultimate Guide To The 3D Printer Filament Need Content? Contact me at abby@asharpencil.com (words: 2056) The Ultimate Guide To The 3D Printer Filament What is 3D Printing? Technology has developed
More informationPOLYMER PROCESSING RELEASE AGENT CLEANER LUBRICANT PROTECTION
RELEASE AGENT POLYMER PROCESSING CLEANER LUBRICANT PROTECTION CRC Industries is a worldwide supplier of chemical products for the industry, automotive and electro segments. The company consists of four
More informationDesign of Rigid Plastic Packaging for Recycling
Guidance Document Design of Rigid Plastic Packaging for Recycling Guidance on how to design pots, tubs, trays and non-drink bottles so that they are as recyclable as possible. Project code: IMT003-203
More informationAutomotive. 3M TM HPW 2011 (High Performance Wipe) The use of the name cleaning agents above depends on the surface material to be cleaned.
Automotive Technical Data Sheet October 2013 Usage of 3M Acrylic Foam und 3M Acrylic Plus Tapes General Information Description Based on its excellent performance properties 3M Acrylic Foam are used for
More informationTechnical and commercial considerations p. 1 Introduction p. 1 General considerations p. 1 Rigid containers p. 1 Caps, lids, closures and devices p.
Technical and commercial considerations p. 1 Introduction p. 1 General considerations p. 1 Rigid containers p. 1 Caps, lids, closures and devices p. 2 Blow-moulded containers p. 2 Flexible packaging p.
More informationUltimaker materials. Enabling innovation with industrial-grade materials
Ultimaker materials Enabling innovation with industrial-grade materials Empower your business with our integrated ecosystem Our integrated ecosystem of reliable hardware, extensively tested materials,
More informationStress-Strain Behavior
15-1 CHAPTER 15 CHARACTERISTICS, APPLICATIONS, AND PROCESSING OF POLYMERS PROBLEM SOLUTIONS Stress-Strain Behavior which is 15.1 From Figure 15.3, the elastic modulus is the slope in the elastic linear
More informationCurrent Status of CMET
Current Status of CMET Nov. 8, 2008 CMET Inc., Yokohama, Japan Dr. Tsuneo HAGIWARA ( 萩原恒夫 ) http://www.cmet.co.jp Schematic diagram of stereolithography system scanner mirror lens shatter Solid state UV-LASER
More informationMaterials of Engineering ENGR 151 CHARACTERISTICS, APPLICATIONS AND PROCESSING OF POLYMERS
Materials of Engineering ENGR 151 CHARACTERISTICS, APPLICATIONS AND PROCESSING OF POLYMERS POLYMER CRYSTALLINITY Crystalline regions thin platelets with chain folds at faces Chain folded structure Fig.
More informationPolymers - Macromolecules. Proteins polyamides, enzymes, muscles, tissue, Hair, wool, silk. Nucleic Acids - DNA, RNA
SCM-503/703: Structure & Properties of Polymeric Materials 603-1.1 Natural Polymers Synthetic Polymers Polymers - Macromolecules Proteins polyamides, enzymes, muscles, tissue, air, wool, silk Carbohydrates
More informationHousehold Container Recycling - High School Student Worksheet. Newspapers, Plastic Bottles, Glass Jars, Cardboard Boxes, etc.
Name: Date: Part I: Introduction 1. List 4 household items that can be recycled. Newspas, Plastic Bottles, Glass Jars, Cardboard Boxes, etc. 2. What is Single Stream Recycling? A system where all types
More informationWe didn't plan to talk about it, but since you asked...
We didn't plan to talk about it, but since you asked... Here s some info re recycle of plastics vs. landfills Are the benefits of recycling plastics outweighed by the pollution that results from recycling
More informationNeed an Adhesive to Bond Composites?
Need an Adhesive to Bond Composites? Try the 3M Scotch-Weld Structural Adhesive Selector Start Now Choose Your Substrate Combination Select button to view recommended 3M Scotch-Weld Structural Adhesive
More informationGeosynthetics. Nanjundaswamy P. Dept. of Civil Engineering S J C E, Mysore
Geosynthetics Nanjundaswamy P. Dept. of Civil Engineering S J C E, Mysore What are Geosynthetics? GEO Soil, Rock or other Geotechnical material SYNTHETIC Man made Polymeric material Used to enhance, augment
More informationconsultation feedback unpacking team roles gantt charts code of conduct updates
consultation feedback unpacking team roles gantt charts code of conduct updates budget! average to date = $0? 1000 900 800 700 600 00 00 00 00 100 0 ORANGE TEAM CYAN TEAM RED TEAM PURPLE TEAM YELLOW TEAM
More informationCHAPTER 14: POLYMER STRUCTURES
CAPTER 14: POLYMER STRUCTURES ISSUES TO ADDRESS... What are the basic microstructural features? ow are polymer properties effected by molecular weight? ow do polymeric crystals accommodate the polymer
More informationEnvironmental Technical Brief: HDPE
Dordan Manufacturing Co. Inc. 2025 S. Castle Rd. Woodstock, IL, 60098 815.334.0087 Dordan.com Environmental Technical Brief: HDPE An overview of High-density Polyethylene s environmental profile HPDE An
More informationLecture 5. Chapter 7. Range of Mechanical Properties for Polymers. The University of New Mexico. The University of New Mexico TABLE 7.
Lecture 5 Chapter 7 Range of Mechanical Properties for Polymers TABLE 7.1 Material UTS (MPa) E (GPa) ABS 28 55 1.4 2.8 ABS, reinforced 100 7.5 Acetal 55 70 1.4 3.5 Acetal, reinforced 135 10 Acrylic 40
More informationChapter 14 Polymers CHAPTER 7 POLYMERIC MATERIALS. Ancient Polymer History. Rubber balls used by Incas Noah used pitch (a natural polymer) for the ark
Chapter 14 Polymers What is a polymer? Polymers are organic materials made of very large molecules containing hundreds of thousands of unit molecules called mers linked in a chain-like structure (repeated
More informationCANADIAN PLASTICS INDUSTRY ASSOCIATION
CANADIAN PLASTICS INDUSTRY ASSOCIATION 1 2 TABLE OF CONTENTS SCIENCE: MATERIALS & TECHNOLOGY Pages 3-12 TEACHER S NOTES ACTIVITY CARDS Card Number THINKING IN TERMS OF PROPERTIES S-1 Recognizing Plastics
More informationTemperature Stability of RF Components R. Akre 4/21/2005
Temperature Stability of RF Components R. Akre 4/21/2005 Typically the phase change of the RF passing through a device will change with temperature. With near speed of light cables, the cable length increases
More informationIntroduction: Standard Plastic Terminology Plastic Program Analysis and Development p. 1 Selecting the Design Team for Success p. 3 Using Checklists
Preface p. xv Introduction: Standard Plastic Terminology p. xix Plastic Program Analysis and Development p. 1 Selecting the Design Team for Success p. 3 Using Checklists to Develop Product Requirements
More informationCustom Trays. Design Guide
Custom Trays Design Guide INDEX Custom Plastic Trays Design Guide This white paper is intended as a guide noting common Tray Design Features, Material Options, and Typical Tray Applications along with
More informationFORMLABS WHITE PAPER: A Guide to Post-Curing Formlabs Resins. March 2018 formlabs.com
FORMLABS WHITE PAPER: A Guide to Post-Curing Formlabs Resins March 218 formlabs.com Table of Contents Abstract 3 Methodology 4 Introduction 5 Recommended Cure Settings: Clear. 6 Recommended Cure Settings:
More informationWe didn't plan to talk about it, but since you asked...
We didn't plan to talk about it, but since you asked... Here s some info re recycle of plastics vs. landfills Are the benefits of recycling plastics outweighed by the pollution that results from recycling
More informationChapter 15-2: Processing of Polymers
Chapter 15-2: Processing of Polymers ISSUES TO ADDRESS... Other issues in polymers What are the primary polymer processing methods? Chapter 15-1 Polymer Synthesis Reactions There are two types of polymerization
More informationDesigning for moldability
Print. Format: Landscape Page Size: Fit to page Bind and save. Bind in presentation format for future reference Designing for moldability A quick-reference user guide for rapid injection molding for engineers
More informationTentative Interim Amendment NFPA 13. Standard for the Installation of Sprinkler Systems 2016 Edition
Tentative Interim Amendment NFPA 13 Standard for the Installation of Sprinkler Systems 2016 Edition Reference: 5.6.3.3, Figure 5.6.3.4.2, Figure 5.6.3.3.3.2(new), 5.6.3.4, 5.6.4, A.5.6 and Table A.5.6.1.1
More informationPolymer MS/PhD Qualifying Exam
Polymer MS/PhD Qualifying Exam FALL 2012 Time = 3 h Closed Books/Notes Use ONE blue book for each part. PART-1: General Polymer Chemistry 1. Write the structural repeat units for the following polymers:
More informationEnd of Life Recovery Options
Plastic Acetal (POM) Glides (Brooks) Recycled POM Acrylonitrile Butadiene Styrene (ABS) High Density Polyethylene (HDPE) Low Density Polyethylene (LDPE, LLDPE) Amr Caps, Leg Cap Glide, Spacers (Insight
More informationFORMLABS WHITE PAPER: A Guide to Post-Curing Formlabs Resins. March 2018 formlabs.com
FORMLABS WHITE PAPER: A Guide to Post-Curing Formlabs Resins March 218 formlabs.com Table of Contents Abstract 3 Methodology 4 Introduction 5 Recommended Cure Settings: Clear. 6 Recommended Cure Settings:
More informationIndustrial aspects of polymer processing
Course MP10 Lecture 2 Industrial aspects of polymer processing Ben, I just want to say one word to you, just one word plastics Dr James Elliott 2.1 General model of polymer processing Overview of the various
More informationTUBi - TUBING YOUR WAY
TUBING YOUR WAY TUBi - TUBING YOUR WAY Tubing is an essential part of every fluidic system. With our knowledge in the field we can assist you in finding the most suitable tubing solution for your needs.
More informationET Core Module Development TEMPLATE
ET Core Module Development TEMPLATE Science/Technology Content Area: Science: Student Competencies: Mathematics: Engineering Technology: Communications: Problem Scenario Copyright 2004, SC ATE Center of
More informationBasic Concept / Targets and Results
Recycling-Oriented Society Konica Minolta Environmental Report 212 Basic Concept / Targets and Results Basic Concept Petroleum-based resources are exhaustible, and need to be used efficiently from the
More informationBiocomposites: Opportunities for ND Agricultural Byproducts
Biocomposites: Opportunities for ND Agricultural Byproducts C.A. Ulven, Assistant Professor Mechanical Engineering Department North Dakota State University (NDSU) Collaborators: V. Chevali, S. Pryor, I.
More informationNonmetallic Materials: Plastics, Elastomers, Ceramics, and Composites. Chapter 9. ME-215 Engineering Materials and Processes.
Nonmetallic Materials: Plastics, Elastomers, Ceramics, and Composites Chapter 9 9.1 Introduction Wood has been a key engineering material throughout human history Ways to manufacture specific types of
More informationIndependent third-party test results Performance of clear engineered polymers and glass
Independent third-party test results Performance of clear engineered polymers and glass How tough is tough? How clear is clear? How durable is durable? Up to the challenge Durability, clarity, impact resistance,
More informationWhite Paper. Bonding Low Surface Energy Plastics. New Adhesive Systems Provide Alternative Fastening Methods For Low Surface Energy Plastics
White Paper Bonding Low Surface Energy Plastics New Adhesive Systems Provide Alternative Fastening Methods For Low Surface Energy Plastics Thermoplastic olefins offer durability, flexibility, and resistance
More information