Introduction to. Asian Center for Engineering Computations and Software. ACECOMS & AIT Solutions 1
|
|
- Ralf Stewart
- 5 years ago
- Views:
Transcription
1 Introduction to 2016 Asian Center for Engineering Computations and Software ACECOMS & AIT Solutions 1
2 ETABS 2016 is The ultimate integrated software package for the structural analysis, design and detailing of buildings ETABS2016 is available in three levels Plus, Nonlinear and Ultimate For more details for each level, please visit ACECOMS & AIT Solutions 2
3 BASIC CONCEPT ACECOMS & AIT Solutions 3
4 BASIC CONCEPT: What ETABS2016 can do? Modeling Joint Frame 1D Element Beams Columns Braces Tendons Shell 2D Element Slabs Walls Nonlinear Element Analysis Linear Static Response Spectrum Nonlinear Time History Pushover Buckling P-Delta Construction Sequence Walking Vibration Design Steel Frame Concrete Frame Composite Beam Composite Column Steel Joist Shear Wall Steel Connection & Base Plate Concrete Slab Detailing Framing Plans Beams Columns Shear Walls Steel Connections ACECOMS & AIT Solutions 4
5 BASIC CONCEPT 2016 Frame Element (1D Element) Local Axis ACECOMS & AIT Solutions 5
6 INTEGRATED SOFTWARE FOR STRUCTURAL ANALYSIS & DESIGN BASIC CONCEPT Frame Element (1D Element) Frame Subdivide and Automatic Subdivide ACECOMS & AIT Solutions 6
7 BASIC CONCEPT 2016 Frame Element (Alignment Type) Beam (Horizontal Alignment) Column (Vertical Alignment) Brace (Incline Alignment) Beam Column Brace ACECOMS & AIT Solutions 7
8 BASIC CONCEPT Shell Element (2D Element) INTEGRATED SOFTWARE FOR STRUCTURAL ANALYSIS & DESIGN ACECOMS & AIT Solutions 8
9 BASIC CONCEPT Shell Element (2D Element) Area Meshing and Area Object Mesh Option Manual Meshing No Meshing Auto Meshing Shear Diagram of Perimeter Beams ACECOMS & AIT Solutions 9
10 BASIC CONCEPT 2016 Area Element (Alignment Type) Slab (Horizontal Alignment) Wall (Vertical Alignment) Slab Wall ACECOMS & AIT Solutions 10
11 USER INTERFACE ACECOMS & AIT Solutions 11
12 User Interface: Simple, and Powerful User Interface ETABS offers a single user interface to perform: Modeling, Analysis, Design, Detailing and Reporting. A new model explorer is available for quick access to objects, properties and forms. Users now have no limit on the number of model windows and views for model manipulation and data views. ACECOMS & AIT Solutions 12
13 User Interface: Model Explorer Define, duplicate, and modify properties Drag and drop assignment to model Display and set default displays Save and recover user-defined displays Review detailing views and drawings Print and export drawings and views ACECOMS & AIT Solutions 13
14 MODELING ACECOMS & AIT Solutions 14
15 Modeling Tools: Modeling Templates ETABS has a wide selection of templates for quickly starting a new model. At this model template stage, the user has the ability to define grid and grid spacing, the number of stories, the default structural system sections, default slab and drop panel sections and uniform loads (specifically dead and live loads). ACECOMS & AIT Solutions 15
16 Modeling Tools: Grid Systems Grid systems include: Cartesian Cylindrical General grids Direct free-form drawing of grid lines. Every grid system can have its unique origin and rotation. ACECOMS & AIT Solutions 16
17 Modeling Tools: Intelligent Snaps Intelligent snaps make model generation simple by automatically detecting intersections, extensions, parallels and perpendiculars. Drawing helper tools will show physical extrusions even when in analytical draw mode. ACECOMS & AIT Solutions 17
18 Modeling Tools: Plans and Elevations Elevations along gridlines Developed elevations along strips Editing and assignments in elevation view ACECOMS & AIT Solutions 18
19 Modeling Tools: Meshing Tools Automatic Rectangular Mesh Settings for Walls Automatic Mesh Settings for Floors Automatic Line Constrain Frame Auto Mesh Options ACECOMS & AIT Solutions 19
20 Modeling Tools: Extrude Extrude Joints to Frames Extrude Frames to Shells ACECOMS & AIT Solutions 20
21 BUILDING COMPONENTS ACECOMS & AIT Solutions 21
22 Building Components: Frame Elements Concrete Section Steel Section Steel Composite sections Special Section Non-prismatic sections ACECOMS & AIT Solutions 22
23 Building Components: Frame Elements for Concrete Section Section Properties for Concrete Frame Concrete Column Concrete Beam Column Beam ACECOMS & AIT Solutions 23
24 Building Components: Frame Elements for Steel Section Steel Frame Section (Include Built-up Section) Import Steel Frame Section Database, Auto Selection ACECOMS & AIT Solutions 24
25 Building Components: Frame Element for Steel Composite Section Filled Box/ Tube Section Filled Pile Section Circular Encased Section Rectangular Encased I Section ACECOMS & AIT Solutions 25
26 Building Components: Frame Element for Special Section Section Designer (SD) Any arbitrary shape with any user defined material Automatically calculates all section properties Generates biaxial interaction diagram for concrete sections Moment curvature diagrams Complete section report generation ACECOMS & AIT Solutions 26
27 Building Components: Shell Elements Shell-Thin Shell-Thick Membrane Layered ACECOMS & AIT Solutions 27
28 Section Properties 2016 Building Components: Shell Elements Membrane Section (Shear wall behavior): pure membrane behavior only the in-plane forces and the nor mal (drilling) moment can be sup ported Shell Section (Shear wall + Slab behavior): full shell behavior, a combination of membrane and plate behavior U3, R3 Node 3 U2, R2 U1, R1 U3, R3 Node 4 U2, R2 U1, R1 R3 Node 3 U2 U1 3 2 Node 4 U2 U1 3 2 U3, R3 1 U3, R3 U2, R2 Node 1 U1, R1 1 Node 2 U2, R2 U1, R1 R3 Node 1 U2 U1 R3 Node 2 U2 U1 Shell Membrane ACECOMS & AIT Solutions 28
29 Building Components: Shell Elements Section Properties: Slab behavior ACECOMS & AIT Solutions 29
30 Building Components: Shell Elements Section Properties: Wall behavior ACECOMS & AIT Solutions 30
31 Building Components: Shell Elements Membrane Section: Load Transfer One-Way Two-Way ACECOMS & AIT Solutions 31
32 Building Components: Shell Elements Shell Section Manual Mesh or Auto Mesh Flat Slab System ACECOMS & AIT Solutions 32
33 Building Components: Shell Elements Membrane Section No Node at Middle of Slab (No Meshing) Beam & Slab System For Load Transfer from Slab to Beam Only ACECOMS & AIT Solutions 33
34 Building Components: Layered Shell Elements Complete section report generation Mixed material composite behavior Nonlinear material behavior for each layer based on stress-strain Shearing behavior considered for rebar layered shell sections. ACECOMS & AIT Solutions 34
35 Building Components: PT Tendon For post-tensioning in the design of concrete slabs ACECOMS & AIT Solutions 35
36 Building Components: Insertion Point for Frame Elements Insertion Point ACECOMS & AIT Solutions 36
37 Building Components: Insertion Point for Shell Elements ACECOMS & AIT Solutions 37
38 Building Components: Shear Walls and Wall Stacks Customizable wall configuration templates help you define your wall section properties with ease. Draw multilevel wall configurations in a single click. All pier and spandrel labeling is automatically assigned. ACECOMS & AIT Solutions 38
39 Building Components: Similar Story System ACECOMS & AIT Solutions 39
40 Building Components: Building Towers Tower 1 Tower 2 Multi-tower buildings can now easily be modeled by using the Tower feature. Allows for different story levels and different grid systems for different building structures withing the same ETABS model. ETABS models can share a podium level and then separate into towers on higher floors. Tower3 ACECOMS & AIT Solutions 40
41 LOADING ACECOMS & AIT Solutions 41
42 Loading: Automatic Loading Automatic Code Based Seismic Loading Automatic Code Based Wind Loading Automatic Live Load Reduction ACECOMS & AIT Solutions 42
43 Loading: Area, Line, Point and Thermal Loads Uniform or non-uniform surface loads Point loads can be assigned in any direction, including skewed angles Uniform or trapezoidal loads on lines Thermal load can be assigned to joints, lines and/or areas Imposed joint support displacement ACECOMS & AIT Solutions 43
44 ANALYSIS ACECOMS & AIT Solutions 44
45 Analysis: Object Based Meshing Object meshing is automated based on maximum element size. The mesh will always be parallel and perpendicular to longest edge, grid system, or area local axes. The mesh size will aim to maintain good element aspect ratios ACECOMS & AIT Solutions 45
46 Analysis: Dynamic Analysis Modal frequency analysis using Ritz or Eigen vectors Response spectrum analysis Linear and nonlinear time history analysis ACECOMS & AIT Solutions 46
47 Analysis: Construction Sequencing Incremental Construction Sequence Modeling and Loadings With large deflections, yielding, and gap opening and closing. With time-dependent creep, shrinkage, and strength-change effects Arbitrary loading sequences ACECOMS & AIT Solutions 47
48 Analysis: Automated Floor Vibration Anlaysis Define vibration analysis paths on floor slabs, along with parameters Defining demand and capacity. Automated time-history analysis is performed for each case. ACECOMS & AIT Solutions 48
49 Analysis: Integrated Forces from Design Strip (Moment, Shear & Torsion) Integrated force diagrams displayed onscreen Integrated force reported in tables Moment Diagrams Moment Contour Shear Diagrams ACECOMS & AIT Solutions 49
50 DESIGN ACECOMS & AIT Solutions 50
51 Steel Frame Design 2016 Member size optimization using auto-select lists US and International design codes Interactive re-design using different design parameters and sections. Comprehensive overwrite capabilities ACECOMS & AIT Solutions 51
52 Concrete Frame Design Required area of steel calculations for existing structures Auto selection lists for new member sizing US and International design codes Interactive design and review Comprehensive overwrite capabilities ACECOMS & AIT Solutions 52
53 Composite Beam and Composite Column Design Member sizing using auto-select lists Calculation of camber and stud requirements US and International design codes Comprehensive overwrite capabilities ACECOMS & AIT Solutions 53
54 RC Slab Design: Design Strip Orthogonal design strips Non-orthogonal design strips Multi-segment design strips Varying width design strips ACECOMS & AIT Solutions 54
55 RC Slab Design: Flexural Design Strip Required rebar area Required number of rebar ACECOMS & AIT Solutions 55
56 RC Slab Design: Punching Shear Check Considers column location, openings, and slab edges. Additional drop panel check Design of punching reinforcement ties or shear studs ACECOMS & AIT Solutions 56
57 Shear Wall Design 2016 Calculations of reinforcing requirement for both overturning and shear Demand/capacity caluclations of defined reinforement US and International design codes Comprehensive overwrite capabilities ACECOMS & AIT Solutions 57
58 Shear Wall Design: Concept A: Shear Wall with Line Loads B: Finite Element Model Rigid Zones Beams Columns 3 DOF per rigid zone C: Define Beams & Columns D: Beam-Column Model ACECOMS & AIT Solutions 58
59 Shear Wall Design: Design Types Spandrel (Beam Behavior) Pier (Column Behavior) Uniform Reinforcement Simple T & C ACECOMS & AIT Solutions 59
60 Steel Connection Design: Beam-Column Connection Moment Connection Shear Connection ACECOMS & AIT Solutions 60
61 Steel Connection Design: Column Base Plate Axial Load Only Axial Load and Biaxial Moments ACECOMS & AIT Solutions 61
62 OUTPUT and DISPLAY ACECOMS & AIT Solutions 62
63 Display: General Display with full control of the Mixed units 3D perspective graphical displays Force diagrams and stress contours Story vertical loads, shears and overturning moments The ability to generate video (.avi) files to visually display a set of analysis results ACECOMS & AIT Solutions 63
64 Display: Section Cut 2016 Graphical section cut definitions for forces and stresses The resultant (free-body) forces and moments across any cut in the structure can be defined using section cuts. A section cut can have any shape, and can be used to compute story shears, connecting forces, design forces in shear walls, and for many other purposes. Section cut results can be obtained for all types of load cases and combinations. ACECOMS & AIT Solutions 64
65 Display: Tabular Output Tables for all input data, analysis results, and design results Print or save tabular data to Access, Excel, Word, HTML, or TXT Filter, sort, and query table data Customize column data format Hide unnecessary columns ACECOMS & AIT Solutions 65
66 DETAILING ACECOMS & AIT Solutions 66
67 Detailing: Integrated Drawing Generation Complete drawing generation capabilities baked into all levels of ETABS 2016 Components view are the basic building blocks for drawings Component views can be dragged and dropped onto drawing sheets ACECOMS & AIT Solutions 67
68 Detailing: Steel Component Detailing Basic building blocks for drawings Comprehensive steel detailing and scheduling for: Floor Framing Beams Columns Connections ACECOMS & AIT Solutions 68
69 Detailing: Concrete Detailing Basic building blocks for drawings Control bar sizes and spacing Detail all or only bars above a typical quantity Beam and slab curtailment rules Control information displayed in rebar calls Specify bars around openings ACECOMS & AIT Solutions 69
70 Detailing: Concrete Detailing Complete reinforcement detailing for concrete frame and shear walls. Comprehensive steel detailing and scheduling for: Beams Columns Walls ACECOMS & AIT Solutions 70
71 Detailing: Detailed Section Cuts Cuts through slabs, beams, and mats User-defined orientation and length Instant section preview Adjustable section cut view range ACECOMS & AIT Solutions 71
72 OTHERS ACECOMS & AIT Solutions 72
73 Others: Report Generation The report generator features include Indexed table of contents Model definition information Analysis and design results ACECOMS & AIT Solutions 73
74 Others: Import/Export Export model to MS-access or database Export stories to SAFE for slab/foundation analysis/design Cut & paste portions of model to Excel spreadsheet for editing Import/Export model in CIS/2 STEP file format Steel buildings detailed in ProSteel 3D link Import/Export project data with Autodesk Revit Structure Export steel models in the Steel Detailing Neutral File format Import/Export data using IFC standards Import files in the following program formats: AutoCAD FrameWorks Plus IGES STAAD STRUDL ACECOMS & AIT Solutions 74
75 THANK YOU ACECOMS & AIT Solutions 75
Fz LLC. Exclusive Distributor in the Middle East for CSI Software licensing, technical support and training solutions
Exclusive Distributor in the Middle East for CSI Software licensing, technical support and training solutions www.techiesoft.com For Sales: sales@techiesoft.com For Technical Support: support@techiesoft.com
More informationSAP2000 Overview One Window, Many Views
Exclusive Distributor in the Middle East for CSI Software licensing, technical support and training solutions www.techiesoft.com For Sales: sales@techiesoft.com For Technical Support: support@techiesoft.com
More informationCustomizable and Integrated Configuration. Modeling Environment. Advanced Meshing Tools
Model, analyze and design structures regardless of geometric complexity, material type, loading conditions, nonlinear effects, or design codes. Easy enough for simple projects, powerful enough for the
More informationSAFE Enhancements
Exclusive Distributor in the Middle East for CSI Software licensing, technical support and training solutions www.techiesoft.com For Sales: sales@techiesoft.com For Technical Support: support@techiesoft.com
More informationETABS LINEAR AND NONLINEAR STATIC AND DYNAMIC ANALYSIS AND DESIGN OF BUILDING SYSTEMS INTEGRATED DESIGN AND ANALYSIS SOFTWARE FOR BUILDING SYSTEMS
INTEGRATED DESIGN AND ANALYSIS SOFTWARE FOR BUILDING SYSTEMS FOR WINDOWS 95/98/NT/2000 ETABS LINEAR AND NONLINEAR STATIC AND DYNAMIC ANALYSIS AND DESIGN OF BUILDING SYSTEMS STRUCTURAL AND EARTHQUAKE ENGINEERING
More informationStructural Design Course
Structural Engineering Structural Design Course Guide Lines Eng. Mostafa Elgammal Training Course Description Structural Design Course Guideline This Course is designed for students to be exposed to real
More informationVerification Examples
Verification Examples 1 Introduction Gen Verification Examples contain the verified results of various program functions. Each example entails a general verification process witch confirms the validity
More informationLINEAR AND NONLINEAR STATIC AND DYNAMIC ANALYSIS AND DESIGN OF BUILDING SYSTEMS FOR STEEL, CONCRETE AND MASONRY
ETABS v9.6 LINEAR AND NONLINEAR STATIC AND DYNAMIC ANALYSIS AND DESIGN OF BUILDING SYSTEMS FOR STEEL, CONCRETE AND MASONRY. STRUCTURAL AND EARTHQUAKE ENGINEERING SOFTWARE Win 2000/ XP / Vista HIGHRISE
More informationSAFE 2016 (v16.0.0) Release Notes
SAFE 2016 (v16.0.0) Release Notes Copyright Computers and Structures, Inc., 2016 Notice Date: 2016-12-22 This file lists all changes made to SAFE since the previous version. Incidents marked with an asterisk
More informationmidas Gen Release Note
Gen 2014 Integrated Design System for Building and General Structures midas Gen Release Note Release Date : May. 28, 2014 Product Ver. : 2014(v2.1) Gen 2014 (v2.1) Release Note Gen 2014 (v2.1) Release
More informationABOUT EXTREME LOADING FOR STRUCTURES WHAT S NEW IN ELS 5?
ABOUT EXTREME LOADING FOR STRUCTURES ASI s Extreme Loading for Structures (ELS) software is the ideal fully nonlinear structural analysis tool to study the behavior of steel, reinforced concrete, and masonry
More informationCOMPARISON OF MULTISTORY WALL RESULTS BETWEEN ADAPT-EDGE 1 AND ETABS 2 CONCRETE FRAME WITH SHEARWALLS
Your Partner in Structural Concrete Design TN500_EDGE_Etabs_Comp_06132016 COMPARISON OF MULTISTORY WALL RESULTS BETWEEN ADAPT-EDGE 1 AND ETABS 2 CONCRETE FRAME WITH SHEARWALLS INTRODUCTION This Technical
More informationETABS 2016 (Version ) Release Notes
ETABS 2016 (Version 16.1.0) Release Notes Copyright Computers and Structures, Inc., 2017 Notice Date: 2017-04-07 This file lists all changes made to ETABS since the previous version. Most changes do not
More informationSeismic Analysis & Design of 10 Story RC Building
Seismic Analysis & Design of 10 Story RC Building (Time History Analysis) Using ETABS (Metric Units) 0.3 yg 0.2 0.1 0 0 2 4 6 8 10 12-0.1-0.2-0.3 Table of Content Objective 5 Problem 5 Step by Step 11
More informationSAP2000 for Standalone Concrete Column and Beam Design
SAP2000 for Standalone Concrete Column and Beam Design If you own any current version of SAP2000, you already have all the capabilities described in this document. If you don t want to tie up an expensive
More informationA Finite Element Approach to Reinforced Concrete Slab Design in GT STRUDL
A Finite Element Approach to Reinforced Concrete Slab Design in GT STRUDL James Deaton and Dr. Kenneth M. Will 2006 GT STRUDL Users Group Meeting 23 June 2006 1 Introduction Background and Motivation The
More informationS. Gandhi *1, Syed Rizwan 2
2017 IJSRSET Volume 3 Issue 3 Print ISSN: 2395-1990 Online ISSN : 2394-4099 Themed Section: Engineering and Technology Analysis and Design of Tall Building (G+21) Using ETABS S. Gandhi *1, Syed Rizwan
More informationThe Practicing Engineer s Solution for Advanced Nonlinear Dynamic Analysis
www.extremeloading.com The Practicing Engineer s Solution for Advanced Nonlinear Dynamic Analysis About Extreme Loading for Structures ASI s Extreme Loading for Structures (ELS) is the first advanced nonlinear
More informationADAPT-BUILDER : General Analysis/Design Options
ADAPT-BUILDER : General Analysis/Design Options Quick Reference Guide Updated November 2017 Copyright All rights reserved 2017 1 2 3 4 5 6 7 8 9 General analysis/design options: 1. Both prestressed and
More informationKey Features and Terminology
Key Features and Terminology SAFE DESIGN OF SLABS, BEAMS AND FOUNDATIONIS REINFORCED AND POST-TENSIONED CONCRETE Key Features and Terminology ISO SAF112816M1 Rev. 0 Proudly developed in the United States
More informationETABS Example Static, Dynamic Analysis and Design of RC Building with Shear Wall
ETABS Example Static, Dynamic Analysis and Design of RC Building with Shear Wall (5 Story Building, US Units) ACECOMS, AIT Table of Content for Example Objective...4 Problem...4 Part A: Modeling, Static
More informationSAFI TM 3D. Why SAFI? Among SAFI applications we can find: Structural Analysis and Strength of Materials
SAFI 3D is a robust and reliable structural software designed with the latest technological innovations in its field and is equipped with a sophisticated, ergonomic and user friendly graphical user interface.
More informationCouncil on Tall Buildings
Structure Design of Sino Steel (Tianjin) International Plaza Xueyi Fu, Group Chief Engineer, China Construction Design International 1 1 Brief of Project 2 Location: Tianjin Xiangluowan Business District
More informationADAPT-PTRC 2016 Getting Started Tutorial ADAPT-PT mode
ADAPT-PTRC 2016 Getting Started Tutorial ADAPT-PT mode Update: August 2016 Copyright ADAPT Corporation all rights reserved ADAPT-PT/RC 2016-Tutorial- 1 This ADAPT-PTRC 2016 Getting Started Tutorial is
More informationETABS 2013 Version Release Notes
ETABS 2013 Version 13.1.4 Release Notes Copyright Computers and Structures, Inc., 2014 Notice Date: 2014-04-17 This file lists all changes made to ETABS since the previous version. Most changes do not
More informationEngSolutions RCB. Analysis & Design of Reinforced Concrete Buildings for Earthquake and Wind Forces
EngSolutions RCB Analysis & Design of Reinforced Concrete Buildings for Earthquake and Wind Forces EngSolutions RCB is a structural engineering-software for 3D analysis and design of reinforced concrete
More informationAECOsim Building Designer Quick Start Guide
AECOsim Building Designer Quick Start Guide Chapter S01 Structural 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Structural...3 Structural Members and Forms... 3 Parts/Families
More informationHILLCREST MANOR Palo Verde, California
STRUCTURAL ENGINEERING CONSULTANTS TN358_MAT_RC_desogm_example_040110 HILLCREST MANOR Palo Verde, California Structural Design of Mat (Raft) Foundation First draft ADAPT Corporation Redwood City, CA, USA
More informationNext Generation Solution for Building Analysis and Design
Next Generation Solution for Building Analysis and Design MIDAS FAMILY PROGRAMS Building midas Gen Integrated System for Building and General Structures midas DShop Auto-Drawing Module to generate Structural
More informationCase Study: Challenges of a Single-layer Reticulated Dome
Case Study: Challenges of a Single-layer Reticulated Dome Naveed Anwar, Pramin Norachan, Thaung Htut Aung AIT Consulting, Asian Institute of Technology, Bangkok, Thailand Contact: nanwar@ait.asia Abstract
More informationSTAAD Foundation Advanced
STAAD Foundation Advanced V8i (SELECTseries 3) Release 7.0 Release Report Last Updated: March 27, 2014 Table of Contents Preface: Introduction... v Chapter 1: V8i (SELECTseries 3) (Release 7.0)... 7 1.1
More informationCivil 2011 (v1.1) Release Note
New Module: GSD Civil 2011 (v1.1) Release Note Integrated Solution System for Bridge and Civil Engineering 1 / 35 New Module: GSD Enhancements New Module 3 1. General Section Designer Pre/Post Processing
More informationADAPT-PT 2010 Tutorial Idealization of Design Strip in ADAPT-PT
ADAPT-PT 2010 Tutorial Idealization of Design Strip in ADAPT-PT Update: April 2010 Copyright ADAPT Corporation all rights reserved ADAPT-PT 2010-Tutorial- 1 Main Toolbar Menu Bar View Toolbar Structure
More informationOVERVIEW OF ADAPT PRODUCTS
PR116. Consulting Company Member POST-TENSIONING INSTITUTE SOFTWARE SYSTEM FOR STRUCTURAL CONCRETE ADAPT_products_1004 041022 OVERVIEW OF ADAPT PRODUCTS The following is a short overview of ADAPT s programs
More informationEngr. Thaung Htut Aung M. Eng. Asian Institute of Technology Deputy Project Director, AIT Consulting
Engr. Thaung Htut Aung M. Eng. Asian Institute of Technology Deputy Project Director, AIT Consulting Selection of Structural systems Load paths Materials Approximate sizing of members Primary mechanisms
More informationThe SP Suite has the capability to design an entire concrete structure from foundation to roof. These programs are based on the methods, equations,
StructurePoint is a software company that provides concrete design solutions. Formerly the engineering software group of the Portland Cement Association (PCA), StructurePoint (SP) is located in Chicago
More informationTSE TOWER TRANSMISSION TOWERS AND ELECTRICAL SUBSTATIONS
TSE TOWER TRANSMISSION TOWERS AND ELECTRICAL SUBSTATIONS TSE TOWER is one of the applications of the TSE Tower Structural Engineering group of products. The TSE TOWER is a powerful and comprehensive Microsoft
More informationMODELLING OF SHEAR WALLS FOR NON-LINEAR AND PUSH OVER ANALYSIS OF TALL BUILDINGS
MODELLING OF SHEAR WALLS FOR NON-LINEAR AND PUSH OVER ANALYSIS OF TALL BUILDINGS Naveed Anwar 1, Thaung Htut Aung 2 ABSTRACT: The Performance Based Analysis and design of buildings and structures, especially
More informationModeling and Design of Bridge Super Structure and Sub Structure
Topic 3 Day 2 Modeling and Design of Bridge Super Structure and Sub Structure Naveed Anwar 1. Over view of Bridge Design Process and Bridge Types 2. Advances and recent trends in Modeling and Analysis
More informationTable of contents. EC3 Steel Design - Class 4 calculation of effective characteristics... 5
What's New 2018 R2 Table of contents NEW OPTIONS & IMPROVEMENTS... 5 EC3 Steel Design - Class 4 calculation of effective characteristics... 5 Optimization of theoretical reinforcement according to EC2
More informationTekla Structural Designer 2017
Tekla Structural Designer 2017 Engineer s Handbooks (AS) March 2017 (5.0.0.7) 2017 Trimble Solutions Corporation part of Trimble Navigation Ltd. Table of Contents Wind Modeling Handbook... 1 Application
More informationStructural Engineering, Mechanics, and Materials. Preliminary Exam - Structural Design
Fall Semester 2018 Preliminary Exam - Structural Design A small building is located in downtown Berkeley. The structural system, either structural steel or reinforced concrete, comprises gravity framing
More informationA Comparative Study on Non-Linear Analysis of Frame with and without Structural Wall System
A Comparative Study on Non-Linear Analysis of Frame with and without Structural Wall System Dr.Binu Sukumar #1, A.Hemamathi *2, S.Kokila #3 C.Hanish #4 #1 Professor &Head, Department of Civil Engineering,
More informationAutodesk Robot Structural Analysis Professional 2010 FEATURE SUMMARY
Autodesk Robot Structural Analysis Professional 2010 FEATURE SUMMARY Following is an overview of new features in Autodesk Robot Structural Analysis Professional 2010 software in the following three categories:
More informationSTUDY ON TALL BUILDING STRUCTURE ANALYSIS
STUDY ON TALL BUILDING STRUCTURE ANALYSIS Liu Huafeng 1, Zhao Ning 2 ABSTRACT TBSA (Tall Building Structure Analysis) is a three-dimension analysis program for tall buildings based on a member structure
More informationRelease Notes for RISA-3D Version 6.0
Release Notes for RISA-3D Version 6.0 Version 6.0 Enhancements / Corrections Enhanced Wood Design Features Added Glu-Lam design per 2001 NDS Enhanced Concrete Design Features Added user defined reinforcement
More informationDESIGN PROCESS USING ADAPT-BUILDER PLATFORM
Structural Concrete Software System TN 182 Builder_design_process_12 111404 DESIGN PROCESS USING ADAPT-BUILDER PLATFORM Update November 13, 2004 This Technical Note walks you through the steps you would
More informationSIGNIFICANCE OF SHEAR WALL IN FLAT SLAB MULTI STORIED BUILDING - A REVIEW. Vavanoor, India
SIGNIFICANCE OF SHEAR WALL IN FLAT SLAB MULTI STORIED BUILDING - A REVIEW Athira M. V 1, Sruthi K Chandran 2 1PG Student, Department of Civil Engineering, Sreepathy Institute of Management And Technology,
More informationADAPT-Builder 2012 Getting Started Guide
ADAPT-Builder 2012 Getting Started Guide Update: February 2013 Copyright ADAPT Corporation all rights reserved ADAPT Builder 2012 Getting Started Guide I TABLE OF CONTENTS 1 Overview of ADAPT-Builder
More informationModeling of Shear Walls for Nonlinear and Pushover Analysis of Tall Buildings
Asian Center for Engineering Computations and Software, AIT Asian Institute of Technology, Thailand 14th ASEP International Convention, Philippines, May 2009 Modeling of Shear Walls for Nonlinear and Pushover
More informationSLAB AND WALL ANALYSIS AND DESIGN. Angel Francisco Martinez Civil Engineer MIDASoft
SLAB AND WALL ANALYSIS AND DESIGN Angel Francisco Martinez Civil Engineer MIDASoft Dimensions 8m 54ft 2m 93 ft 8.8m 2m 2m 2.8m 24 m 9m 171 ft Define Properties Define Material -Concrete ASTM C4500 Define
More informationANALYSIS OF BUILDINGS WITH
1 ANALYSIS OF BUILDINGS WITH RIGID, SEMIRIGID AND PSEUDO-FLEXIBLE DIAPHRAGMS Bulent N. Alemdar, Ph.D., P.E. Rakesh Pathak, Ph.D. 1. INTRODUCTION A diaphragm is horizontal structural component and it functions
More informationSoftware Verification
METHODOLOGY A comprehensive series of test problems, or examples, designed to test the various elements, analysis features, and design algorithms of the program were created. The results produced by were
More informationResponse Analysis of an RC Cooling Tower Under Seismic and Windstorm Effects D. Makovička
Response Analysis of an RC Cooling Tower Under Seismic and Windstorm Effects D. Makovička The paper compares the RC structure of a cooling tower unit under seismic loads and under strong wind loads. The
More informationPERFORMANCE BASED EVALUATION OF FRAMED REINFORCED CONCRETE SHEAR WALLS BY PUSHOVER ANALYSIS
PERFORMANCE BASE EVALUATION OF FRAME REINFORCE CONCRETE SHEAR WALLS BY PUSHOVER ANALYSIS Jyoti Patil 1, r..k.kulkarni 2 1 M.tech student, civil engineering, SMCET harwad, Karnatak, India 2 Professor, civil
More informationThesis Proposal. La Jolla Commons Phase II Office Tower San Diego, California. December 13, 2013
Thesis Proposal December 13, 2013 La Jolla Commons Phase II Office Tower San Diego, California Alyssa Stangl Structural Option Advisor: Dr. Linda Hanagan Table of Contents Executive Summary... 3 Purpose
More informationSIMPLE INVESTIGATIONS OF TENSILE MEMBRANE ACTION IN COMPOSITE SLABS IN FIRE
SIMPLE INVESTIGATIONS OF TENSILE MEMBRANE ACTION IN COMPOSITE SLABS IN FIRE By Ahmed Allam 1, Ian Burgess 1 and Roger Plank 1 Department of Civil and Structural Engineering, University of Sheffield, UK
More informationANALYSIS AND DESIGN OF REGULAR AND IRREGULAR FLAT SLAB FOR MULTISTOREYED BUILDING UNDER TWO SEISMIC ZONES USING ETABS AND SAFE
ANALYSIS AND DESIGN OF REGULAR AND IRREGULAR FLAT SLAB FOR MULTISTOREYED BUILDING UNDER TWO SEISMIC ZONES USING ETABS AND SAFE THIMMAYAPALLY DILEEP KUMAR 1, A.MOWNIKA VARDHAN 2 1 M. Tech (Structural Engineering),
More informationRCDC V5. Release Notes
Release Notes RCDC V5 is here with numerous new features delivering greater accuracy and flexibility to the design, detailing, drawing and reporting experience. The new features introduced are: No Module
More informationKeyboard Shortcuts for Making Selections of Objects Onscreen. Keyboard Shortcuts for Various ETABS Menu Items
Keyboard Shortcuts for Making Selections of Objects Onscreen Keystroke E Spacebar Ctrl key + left click Ctrl key + right click Purpose Puts you in a mode to select edges of area objects Removes you from
More informationETABS 2015 Version Release Notes
ETABS 2015 Version 15.1.0 Release Notes Copyright Computers and Structures, Inc., 2015 Notice Date: 2015-07-27 This file lists all changes made to ETABS since the previous version. Most changes do not
More informationBS EN :2004 EN :2004 (E)
Contents List 1. General 1.1 Scope 1.1.1 Scope of Eurocode 2 1.1.2 Scope of Part 1-1 of Eurocode 2 1.2 Normative references 1.2.1 General reference standards 1.2.2 Other reference standards 1.3 Assumptions
More informationCSiBridge Version Release Notes
CSiBridge Version 20.0.0 Release Notes Copyright Computers and Structures, Inc., 2017 Notice Date: 2017-12-14 This file lists all changes made to CSiBridge since the previous version. Most changes do not
More informationfifteen design for lateral loads Lateral Load Resistance Load Direction Lateral Load Resistance
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS FALL 2013 lecture fifteen design for lateral loads Lateral Load Resistance stability important for any height basic mechanisms
More informationContents. Foreword 1 Introduction 1
Contents Notation x Foreword xiii 1 Introduction 1 1.1 Aims of the Manual 1 1.2 Eurocode system 1 1.3 Scope of the Manual 3 1.4 Contents of the Manual 4 1.5 Notation and terminology 4 2 General principles
More informationNON-LINEAR STATIC PUSHOVER ANALYSIS FOR MULTI-STORED BUILDING BY USING ETABS
NON-LINEAR STATIC PUSHOVER ANALYSIS FOR MULTI-STORED BUILDING BY USING ETABS Polupalli Victor Paul 1, K Sampath Kumar 2 1 PG Student, Dept of Civil Engineering, Nova College of Engineering & Technology,
More informationOffice Building-G. Thesis Proposal. Carl Hubben. Structural Option. Advisor: Dr. Ali Memari
Office Building-G Thesis Proposal Structural Option December 10, 2010 Table of Contents Executive Summary... 3 Introduction... 4 Gravity System...4 Lateral System:...6 Foundation System:...6 Problem Statement...
More informationTwo-way slabs. Flat plate with or without drop panels / capitals
Two-way slabs Two-way slab behavior is described by plate bending theory which is a complex extension of beam bending. Codes of practice allow use of simplified methods for analysis and design of two-way
More informationDEFINING SEQUENTIAL CONSTRUCTION ANALYSIS FOR BUILDINGS IN ETABS 2016 AND SAP2000 V19
DEFINING SEQUENTIAL CONSTRUCTION ANALYSIS FOR BUILDINGS IN ETABS 2016 AND SAP2000 V19 I. Overview Since the past, multi-storey building frames have been analyzed in a single step as a complete frame with
More informationCE 549 Building Design Project Spring Semester 2010
CE 549 Building Design Project Spring Semester 2010 Instructor: Farzad Naeim, Ph.D., S.E., Esq. E-Mail: naeim@usc.edu Syllabus Overview: We will design a mid-rise office building using a team-approach
More informationfifteen design for lateral loads Lateral Load Resistance Load Direction Lateral Load Resistance
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS SPRING 2017 lecture fifteen design for lateral loads Lateral Load Resistance stability important for any height basic
More informationCSiBridge Version Release Notes
CSiBridge Version 20.1.0 Release Notes Copyright Computers and Structures, Inc., 2018 Notice Date: 2018-05-03 This file lists all changes made to CSiBridge since the previous version. Most changes do not
More informationRelease Note DESIGN OF CIVIL STRUCTURES. Release Date : SEP. 1, 2015 Product Ver. : Civil 2016 (v1.1)
Release Note Release Date : SEP. 1, 2015 Product Ver. : Civil 2016 (v1.1) DESIGN OF CIVIL STRUCTURES Integrated Solution System for Bridge and Civil Engineering Enhancements Analysis & Design 3 (1) UK
More informationLEARNING OF ETABS. 15 ft
LEARNING OF ETABS Ram Krishna Mazumder, Institute of Earthquake Engineering Research, Chittagong University of Engineering and Technology, Chittagong 4349, Bangladesh rkmazumder@gmail.com +8801712862281
More informationfifteen design for lateral loads Lateral Load Resistance Load Direction Lateral Load Resistance
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS FALL 2014 lecture fifteen design for lateral loads Lateral Load Resistance stability important for any height basic mechanisms
More informationSTRENGTHENING OF CONCRETE SLAB, BEAM AND COLUMN
STRENGTHENING OF CONCRETE SLAB, BEAM AND COLUMN NAVEED ANWAR (), AND NOORMA SHRESTHA (2) () Associate Director, Asian Center for Engineering Computations and Software (ACECOMS), Asian Institute of Technology
More informationANALYSIS OF MULTISTOREYED STRUCTURES USING ETABS
ANALYSIS OF MULTISTOREYED STRUCTURES USING ETABS S. Vijaya Bhaskar Reddy 1, Jagath Chandra. P 2, Srinivas Vasam 3, P Srinivasa Rao 4 1 Professor and Head, 2 UG Students, Dept. of Civil Engineering, CMR
More informationCADS A3D MAX. How to model shear walls
CADS A3D MAX How to model shear walls Modelling shear walls in A3D MAX Introduction and synopsis This paper explains how to model shear walls in A3D MAX using the `wide column rigid arm sub-frame described
More informationAlexis Pacella Structural Option Dr. Schneider Lexington II, Washington D.C. Technical Report #3 November 21,
1 Executive Summary: Lateral System Analysis and Confirmation Design is an depth look at the lateral system of Lexington II and the loads of which it must carry. The structural system of Lexington II is
More informationGambit Centrum Oprogramowania i Szkoleń Sp. z o.o. Mathcad 14 Roark's Formulas for Stress and Strain
Mathcad 14 Roark's Formulas for Stress and Strain Table of Contents About Mathcad E-Books Notes on the Organization and Special Features of Roark's Formulas for Stress and Strain Preface by Warren C. Young
More informationCE 549 Building Design Project Spring Semester 2013
CE 549 Building Design Project Spring Semester 2013 Instructor: Farzad Naeim, Ph.D., S.E., Esq. E-Mail: naeim@usc.edu Syllabus Overview: We will design a mid-rise office building using a team-approach
More informationADAPT-Floor Pro 2009 Tutorial Export Design Strip to ADAPT-PT or ADAPT-RC
ADAPT-Floor Pro 2009 Tutorial Export Design Strip to ADAPT-PT or ADAPT-RC Update: May 2010 Copyright ADAPT Corporation all rights reserved 1 EXPORT DESIGN STRIP FROM ADAPT-FLOOR PRO TO ADAPT-PT OR ADAPT-RC
More informationNONLINEAR STATIC ANALYSIS OF R.C.C. FRAMES (Software Implementation ETABS 9.7)
NONLINEAR STATIC ANALYSIS OF R.C.C. FRAMES (Software Implementation ETABS 9.7) Mrugesh D. Shah M.E Structure student, B.V.M Engineering College Abstract:- Nonlinear static analysis is an iterative procedure
More informationStudy of Shear Walls in Different Locations of Multistoried Building with Uniform Thickness in Seismic Zone III
Study of Shear Walls in Different Locations of Multistoried Building with Uniform Thickness in Seismic Zone III Ambreshwar 1, Mahesh D 2, Nithinchary 3, Satish Baag 4, Sachin 5 1,2 Assistant Professors,
More informationSEISMIC PERFORMANCE OF FLAT SLAB WITH DROP AND CONVENTIONAL SLAB STRUCTURE
SEISMIC PERFORMANCE OF FLAT SLAB WITH DROP AND CONVENTIONAL SLAB STRUCTURE Archana Shaga 1, Satyanarayana Polisetty 2 1 M.Tech Structural Engineering Student, 2 Assistant Professor 1 Civil Engineering
More informationNonlinear Finite Element Modeling & Simulation
Full-Scale Structural and Nonstructural Building System Performance during Earthquakes & Post-Earthquake Fire A Joint Venture between Academe, Industry and Government Nonlinear Finite Element Modeling
More informationSabah Shawkat Cabinet of Structural Engineering 2017
3.1-1 Continuous beams Every building, whether it is large or small, must have a structural system capable of carrying all kinds of loads - vertical, horizontal, temperature, etc. In principle, the entire
More informationADAPT Floor Pro 2009/2010 Tutorial Export Design Strip to ADAPT PT or ADAPT RC
ADAPT Floor Pro 2009/2010 Tutorial Export Design Strip to ADAPT PT or ADAPT RC Update: May 2010 Copyright ADAPT Corporation all rights reserved ADAPT PT 2010/RC 2010 to ADAPT Floor Pro 2009/2010 Strip
More informationStructural Design of Super High Rise Buildings in High Seismic Intensity Area
Structural Design of Super High Rise Buildings in High Seismic Intensity Area Jianbo Zheng School of Architectural Engineering, Binzhou University, Binzhou, 256600, China zjb2006@163.com Abstract The structure
More informationADAPT-Builder Express (EX) v3. Summary of New Features
ADAPT-Builder Express (EX) v3 Summary of New Features Structural Concrete Design Suite including: ADAPT-Modeler ADAPT-Floor Pro ADAPT-MAT ADAPT-SOG March 2007 1 2007 ADAPT Corporation All rights reserved
More informationETABS 2016 (Version ) Release Notes
ETABS 2016 (Version 16.2.0) Release Notes Copyright Computers and Structures, Inc., 2017 Notice Date: 2017-06-19 This file lists all changes made to ETABS since the previous version. Most changes do not
More informationCE Advanced Structural Analysis. Lab 3 SAP2000 Beam and Frame Structures
Department of Civil & Geological Engineering COLLEGE OF ENGINEERING CE 463.3 Advanced Structural Analysis Lab 3 SAP2000 Beam and Frame Structures February 06 th, 2013 T.A: Ouafi Saha Professor: M. Boulfiza
More informationComparison of One-way and Two-way slab behavior. One-way slabs carry load in one direction. Two-way slabs carry load in two directions.
Two-way Slabs Comparison of One-way and Two-way slab behavior One-way slabs carry load in one direction. Two-way slabs carry load in two directions. Comparison of One-way and Two-way slab behavior One-way
More informationSEAU 5 th Annual Education Conference 1. ASCE Concrete Provisions. Concrete Provisions. Concrete Strengths. Robert Pekelnicky, PE, SE
ASCE 41-13 Concrete Provisions Robert Pekelnicky, PE, SE Principal, Degenkolb Engineers Chair, ASCE 41 Committee* *The view expressed represent those of the author, not the standard s committee as a whole.
More informationSTRUCTURAL DESIGN OF REINFORCED AND PRESTRESSED CONCRETE MEMBERS
STRUCTURAL DESIGN OF REINFORCED AND PRESTRESSED CONCRETE MEMBERS WHAT WE DO We develop software for structural engineers, fabricators, detailers and all others who perform or use structural analysis. Our
More informationDesign and Rating of Steel Bridges
2014 Bentley Systems, Incorporated Parametric and Integrated Bridge Design LEAP Bridge Steel Steve Willoughby Design and Rating of Steel Bridges 2 WWW.BENTLEY.COM 2014 Bentley Systems, Incorporated 1 Discussion
More informationUser Guide. for Eurocode Modules. Design+ Interface General Column Design Combined Wall Design Strip Foundation Design Design Parameters
Solution for Structural Member Design with Drawing & Report midas Design + User Guide for Eurocode Modules Design+ Interface General Column Design Combined Wall Design Strip Foundation Design Design Parameters
More informationCSiBridge Version Release Notes
CSiBridge Version 21.0.1 Release Notes Copyright Computers and Structures, Inc., 2019 Notice Date: 2019-01-22 This file lists all changes made to CSiBridge since the previous version. Most changes do not
More informationCivil 2011 (v2.1)release Note
Pre & Post-processing Civil 2011(v1.1)Release Note Civil 2011 (v2.1)release Note Integrated Solution System for Bridge and Civil Engineering 1 / 15 Pre & Post-processing Civil 2011(v1.1)Release Note Enhancements
More information5.4 Analysis for Torsion
5.4 Analysis for Torsion This section covers the following topics. Stresses in an Uncracked Beam Crack Pattern Under Pure Torsion Components of Resistance for Pure Torsion Modes of Failure Effect of Prestressing
More information