CORE: XFLAM INTERNAL WALLS AND CEILINGS

Transcription

1 CORE: XFLAM INTERNAL WALLS AND CEILINGS XFLAM CORE XFLAM is a cellular foam product which uses natural air fi lled cells to deliver exceptional thermal resistance. The use of natural air ensures absolute safety due to the complete absence of alternative types of gas for cell fi lling. This ensures the insulation performance of XFLAM remains constant from the day it is made to the end of its service life. THERMAL PERFORMANCE XFLAM Panel has the ability to resist transfer of heat making it signifi cant to the thermal performance of a buildings envelope. The easy to seal slip-joint between panels facilitates effi cient, hermetically sealed construction. This controls the air fl ow in and out of a building enabling effi cient heating and cooling of the internal environment. R VALUES NCC Specifi cation J1.2-2, AS : 1993 Methods of testing rigid cellular plastic materials PANEL THICKNESS (mm) XFLAM R-Value (m² K/W) at 15 Celcius FIRE PERFORMANCE XFLAM panel is a safe material in a fi re situation with no fl aming droplets, very low smoke release and virtually no hazardous NOx based compounds being released. XFLAM panel holds FM Approvals for Internal Walls and Ceilings, External Walls and Panel Roofs in addition to BCA Group 1 materials classifi cations. Additionally XFLAM Panel holds various ratings for fi re resistant walls. CRITERIA PERFORMANCE AS : 1993 (Test for Flammability of materials) Flame Spread 0 Ignitability 0 Heat evolved 0 Smoke Dev. 1 AS (FRL) - / 120 / 30 (100mm Panel) - / 120 / 115 (250mm Panel) - / 90 / 60 (100mm Panel + 13mm Fyrchek Plasterboard) Factory Mutual (FM Approved) Unlimited Height FM Roofi ng FM Interiors FM Exterior ISO 9705 BCA Classifi cation Group 1, SMOGRA = 2.2 (m² / s² x 1000) Toxicity (Combustion gases) Very Low (CO, CO2) Page 1 of 5

2 ACOUSTIC ASKIN Panel achieves the following ratings for panel tested in accordance with AS and assessed against AS/NZS ISO 717.1: 2004 PANEL THICKNESS RW RW + Ctr ASKIN XFLAM Panel 75mm ASKIN Dual Panel System- XFLAM 75mm/ EPS 75mm PHYSICAL PROPERTIES CRITERIA Density Recyclable Workability Traffi cability (As per NCC / BCA) Peel Strength ASTM D Initial PERFORMANCE 32 kg/m3 100% Recyclable Excellent. No requirement for protection Resistant to maintenance traffi c (1 person per panel) 1.27 N/mm MANUFACTURING TOLERANCES CRITERIA MANUFACTURED TOLERANCE Length 1,500mm to 22,000mm +/- 5mm Width Standard as 1,200mm +/- 1mm Thicknesses 50mm to 250mm in multiples of 25mm +/- 1mm HAUNCHES & THERMAL CUTS ASKIN has the ability to manufacture on-line haunches for wall to ceiling joints and thermal cuts for low temp rooms. The standard cuts range from 50mm to 225mm in multiples of 25mm and signifi cantly assist onsite installation speed as well as the reduction of site waste. Custom cut lengths are available subject to request. COLOUR RANGE A full choice of colours are available subject to Minimum Order Quantities (MOQ) and warranties. Please contact your ASKIN sales representative. ENVIRONMENTAL ZERO ODP XFLAM foam insulation manufacturing does not use Ozone Depleting Substances such as CFCs, HCFCs or HFCs. Low GWP Pentane used in the initial stages of production has a low global warming potential and much of the pentane content is captured for use as fuel during the process resulting in an exceptionally low GWP. Resource Effi ciency As a low density insulation product XFLAM uses very little natural resources by volume to manufacture. This, coupled with the high insulation values, mean that the energy savings from using XFLAM will amount to hundreds of times the energy required to produce the product. FEATURES & BENEFITS - Fire Rated and FM Approved - Long lengths available up to 22m - Moisture resistant - Superior spanning capability - Warranties of 10+ years available - Fast to install - Extremely thermally effi cient (R Values up to 8+) - 100% Recyclable - Food safe anti-bacterial skins mm Wide modules Page 2 of 5

3 1200mm Flat / Flat Profile Mesa / Flat Profile Rib / Flat Profi le mm mm mm INTERNAL WALL AND CEILING PROFILE COMBINATIONS EXTERNAL SURFACE PROFILES INTERNAL SURFACE PROFILES Note: Other profile combinations available dependant on application. SERVICES ASKIN produces in-line services voids for special requirements. Please contact your ASKIN representative for further information. Page 3 of 5

4 0.4mm EXTERNAL FACE SKIN WITH 0.4mm INTERNAL FACE SKIN External & Internal Skin materials 0.4mm Thick G300S Z275 pre-painted off-white (Permagard ) steel with superior Mass (kg / m²) for 0.4 / PANEL SPAN (m) PANEL THICKNESS mm mm mm mm mm mm mm mm mm EXTERNAL FACE SKIN WITH 0.5mm INTERNAL FACE SKIN External & Internal Skin materials 0.5mm Thick G300S Z275 pre-painted off-white (Permagard ) steel with superior Mass (kg / m²) for 0.5 / PANEL SPAN (m) PANEL THICKNESS mm mm mm mm mm mm mm mm >0.87 kpa Minimum Exterior >0.5 Minimum Internal <0.5 kpa Special Design Page 4 of 5

5 0.6mm EXTERNAL FACE SKIN WITH 0.6mm INTERNAL FACE SKIN External & Internal Skin materials 0.6mm Thick G300S Z275 pre-painted off-white (Permagard ) steel with superior Mass (kg / m²) for 0.6 / PANEL SPANS (m) PANEL THICKNESS mm mm mm mm mm mm mm mm >0.87 kpa Minimum Exterior >0.5 Minimum Internal <0.5 kpa Special Design Disclaimer Information provided here for design guidance only. Designers are encouraged to seek advice from a suitably qualifi ed professional. All data is subject to change without notice. Page 5 of 5