BELTERMO WOOD FIBER INSULATING BOARDS

Size: px
Start display at page:

Download "BELTERMO WOOD FIBER INSULATING BOARDS"

Transcription

1

2 BELTERMO WOOD FIBER INSULATING BOARDS Modern housebuilding requires high quality materials to achieve the best results in energy performance, sustainability and fire safety of buildings, provide maximum comfort for people, make effective use of natural resources and reduce costs, among other factors thanks to construction period reduction. It is obviously necessary to use different types of insulating materials as it allows to protect houses and people living there in the most effective way from cold in winter and heat in summer, from noise, excessive moisture or from dry air. Unique natural properties of wood combined with state-of-the-art technology manufacturing methods allow to create great examples of the natural resources rational usage for people s good. Today multifunctional wood fiber boards BELTERMO are the most efficient and ecological insulating material. It provides high-grade protection from cold, unsurpassed protection from heat, excellent sound insulation and comfortable microclimate. The combination of these properties provides the highest level of energy performance of building compared with other insulating materials. BELTERMO boards are manufactured by dry process on «Siempelkamp» equipment of natural coniferous wood with application of eco-friendly resin on polyurethane basis according to the EN requirements. Combination of different types of boards BELTERMO allows to insulate all types of constructions: roofs, floor slabs, outer walls, interior walls and floors. 1. BELTERMO TOP 2. BELTERMO ULTRA 3. BELTERMO FLOOR 4. BELTERMO INSTALL 5. BELTERMO MULTI 6. BELTERMO SAFE 7. BELTERMO ROOM 8. BELTERMO KOMBI 9. BELTERMO FLEX 2

3 MAIN ADVANTAGES PROTECTION FROM HEAT High level of heat capacity provides practically full absorption of outer heat. The house will be cool and fresh even in hot days, which will save money for not using air conditioner. House temperature will not depend on temperature drop outside. PROTECTION FROM COLD AND WIND The material does not allow heat to come out and cold to come in due to low level of thermal conductivity. High level of airflow resistance provides secure protection from wind. It will be warm in the house even in very cold days which will enable you to save money on heating. COMFORTABLE MICROCLIMATE Ability to absorb and return moisture allows BELTERMO boards to breathe without losing their technical characteristics. Thus it provides optimal moisture and prevents mold or fungus from formation on walls and ceiling. The air in the house will never be too dry or too moist. EXCELLENT SOUND INSULATION The material protects from impact sound inside the house due to high density and homogeneity and absorbs sounds from the outside due to high level of porosity. It will be always quiet in the house which will allow to save money on additional sound insulation. ECOLOGICAL PERFORMANCE Only natural components and ecological binding components in the composition of materials provide for absolute safety for people and environment. However, it is safe from insects and rodents due to its looseness and lack of nutritional substances. FIRE SAFETY Burning passivity by means of carbonization prevents fire and heat prorogation and thus collapse of constructions. Natural components of the materials provide absence of toxic emissions during burning. In case of fire the house residents can be safely evacuated. EASY INSTALLATION Good format of the boards and ecological properties of the material allow manual installation without protective equipment.boards are firmly butt-joined and are easily cut to the right size if necessary. RECYCLABILITY Secondary use of materials preserves natural resources. 3

4 Composition: -MDI resin on polyurethane basis (4%) -paraffin emulsion (1.5%) BELTERMO TOP Water-resistant board Recommended use: external insulation of roofs and outer walls Possible use: floor insulation -cross joints are not allowed -install tightly without gaps (for the roof) -walking on boards between rafters is not allowed -structural loads are not allowed (for ex snow load) Flat/tongue and groove/step Standard size [mm] 2500*600; 2700*600; 2500*750; 1900*600 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/ 800 Maximum width/minimum width[mm] 750/ 580 Bulk density [kg/m 3 ] 200 [W/m*K] 0,044 Calculated thermal conductivity, λ [W/M*К] 0,047 [m 2 К/W] 0,45 0,50 0,64 0,68 0,80 1,18 1,36 Calculated thermal resistance, R [(m 2 К)/W] 0,43 0,47 0,60 0,64 0,74 1,11 1,28 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,06 0,07 0,08 0,09 0,11 0,15 0,18 Compression strength[kpа] 200 Tensile strength perpendicular to surface [kpа] 30 Short-term water absorption [kg/m 2 ] 1,

5 BELTERMO - ULTRA Composition: -MDI resin on polyurethane basis (4%) -paraffin emulsion (1.5%) Water-resistant board Recommended use: external insulation of roofs and outer walls Possible use: floor insulation -cross joints are not allowed -install tightly without gaps (for the roof) -walking on boards between rafters is not allowed -structural loads are not allowed (for ex snow load) Flat/tongue and groove/step Standard size [mm] 1900*600; 1800*600;1200*600, 1250*600; 2500*600 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/800 Maximum width/minimum width[mm] 750/580 Bulk density [kg/m 3 ] 180 [W/m*K] 0,042 Calculated thermal conductivity, λ [W/M*К] 0,045 [m 2 К/W] 1,19 1,43 1,90 2,38 2,86 3,33 3,81 Calculated thermal resistance, R [(m 2 К)/W] 1,11 1,33 1,78 2,22 2,67 3,11 3,56 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,15 0,18 0,24 0,30 0,36 0,42 0,48 Compression strength[kpа] 150 Tensile strength perpendicular to surface [kpа] 30 Short-term water absorption [kg/m 2 ] 1,

6 Composition: -MDI resin on polyurethane basis (4%) BELTERMO - FLOOR Recommended use: floor and floor slab insulation Possible use: internal insulation of outer walls and interior walls -cross joints are not allowed -insulating strip must be placed around the room as high as the total built-up height of the boards (in case of installing on the floor) -put a waterproofing layer if necessary (in case of installing on the floor) Flat/tongue and groove/step Standard size [mm] 1200*600, 1250*580; 1250*600 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/800 Maximum width/minimum width[mm] 750/580 Bulk density [kg/m 3 ] 160 [W/m*K] 0,039 Calculated thermal conductivity, λ [W/M*К] 0,042 [m 2 К/W] 0,51 0,77 1,03 1,54 2,05 2,56 3,08 3,59 4,10 Calculated thermal resistance, R [(m 2 К)/W] 0,48 0,71 0,95 1,43 1,90 2,38 2,86 3,33 3,81 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,06 0,09 0,12 0,18 0,24 0,30 0,36 0,42 0,48 Compression strength[kpа] 100 Tensile strength perpendicular to surface [kpа] 20 Short-term water absorption [kg/m 2 ]

7 BELTERMO - INSTAL Composition: -MDI resin on polyurethane basis (4%) Recommended use: internal insulation of outer walls and insulation of floor slabs Possible use: interior walls and floor insulation -cross joints are not allowed Flat/tongue and groove/step Standard size [mm] 1200*600, 1250*580 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/ 800 Maximum width/minimum width[mm] 750/ 580 Bulk density [kg/m 3 ] 150 [W/m*K] 0,039 Calculated thermal conductivity, λ [W/M*К] 0,042 [m 2 К/W] 0,51 1,03 1,54 2,05 2,56 3,08 3,59 4,10 Calculated thermal resistance, R [(m 2 К)/W] 0,48 0,95 1,43 1,90 2,38 2,86 3,33 3,81 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,06 0,12 0,18 0,24 0,30 0,36 0,42 0,48 Compression strength[kpа] 100 Tensile strength perpendicular to surface [kpа] 10 Short-term water absorption [kg/m 2 ]

8 Composition: -MDI resin on polyurethane basis (4%) -paraffin emulsion (1.5%) BELTERMO - MULTI Water-resistant board Recommended use: external insulation of roofs and outer walls Possible use: internal insulation of roofs, outer walls and floors -cross joints are not allowed -install tightly without gaps (for the roof) -walking on boards between rafters is not allowed -structural loads are not allowed (for ex snow load) 8 Flat/tongue and groove/step Standard size [mm] 1200*600; 1250*580; 1250*600 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/ 800 Maximum width/minimum width[mm] 750/ 580 Bulk density [kg/m 3 ] 140 [W/m*K] 0,039 Calculated thermal conductivity, λ [W/M*К] 0,042 [m 2 К/W] 1,03 1,54 2,05 2,56 3,08 3,59 4,10 Calculated thermal resistance, R [(m 2 К)/W] 0,95 1,43 1,90 2,38 2,86 3,33 3,81 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,12 0,18 0,24 0,30 0,36 0,42 0,48 Compression strength[kpа] 70 Tensile strength perpendicular to surface [kpа] 10 Short-term water absorption [kg/m 2 ] 2,0 100

9 BELTERMO - SAFE Composition: -MDI resin on polyurethane basis (4%) Recommended use: internal insulation of outer walls and interior walls Possible use: insulation of floor slabs, ceilings and floors. -cross joints are not allowed Standard size [mm] 1200*600; 1250*580; 1250*600 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/ 800 Maximum width/minimum width[mm] 750/ 580 Bulk density [kg/m 3 ] 140 [W/m*K] 0,039 Calculated thermal conductivity, λ [W/M*К] 0,042 [m 2 К/W] 0,51 1,03 1,54 2,05 2,56 3,08 3,59 4,10 Calculated thermal resistance, R [(m 2 К)/W] 0,48 0,95 1,43 1,90 2,38 2,86 3,33 3,81 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,06 0,12 0,18 0,24 0,30 0,36 0,42 0,48 Compression strength[kpа] 70 Tensile strength perpendicular to surface [kpа] 10 Short-term water absorption [kg/m 2 ] Flat 9

10 Composition: -MDI resin on polyurethane basis (4%) BELTERMO - ROOM Recommended use: internal insulation of all types of constructions: roof, floor slabs, ceilings, outer walls and interior walls -cross joints are not allowed flat/step Standard size [mm] 1200*600, 1250*580 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/ 800 Maximum width/minimum width[mm] 750/ 580 Bulk density [kg/m 3 ] 130 [W/m*K] 0,038 Calculated thermal conductivity, λ [W/M*К] 0,040 [m 2 К/W] 0,53 1,05 1,58 2,11 2,63 3,16 3,68 4,21 Calculated thermal resistance, R [(m 2 К)/W] 0,50 1,00 1,50 2,00 2,50 3,00 3,50 4,00 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,06 0,12 0,18 0,24 0,30 0,36 0,42 0,48 Compression strength[kpа] 50 Tensile strength perpendicular to surface [kpа] 10 Short-term water absorption [kg/m 2 ]

11 BELTERMO - KOMBI Composition: -MDI resin on polyurethane basis (4%) -paraffin emulsion (1.5%) Water-resistant board Recommended use: external and internal insulation of roofs and external insulation of outer walls Possible use: internal insulation of outer walls, constructions of frame and frame-panel buildings. -cross joints are not allowed -install with BELTERMO-TOP or BELTERMO-ULTRA on roofs -install with BELTERMO-MULTI for external insulation of outer walls Standard size [mm] 1200*600; 1250*580; 1250*600 Nominal thickness [mm] Maximum length/minimum length [mm] 2850/ 800 Maximum width/minimum width[mm] 750/ 580 Bulk density [kg/m 3 ] 110 [W/m*K] 0,037 Calculated thermal conductivity, λ [W/M*К] 0,040 [m 2 К/W] 1,08 1,62 2,16 2,70 3,24 3,78 4,32 4,86 5,41 5,95 6,49 Calculated thermal resistance, R [(m 2 К)/W] 1,00 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00 Water vapor diffusion resistance factor, µ 3 Sd value, Sd [m] 0,12 0,18 0,24 0,30 0,36 0,42 0,48 0,54 0,60 0,66 0,72 Compression strength[kpа] 50 Tensile strength perpendicular to surface [kpа] 10 Short-term water absorption [kg/m 2 ] 2,0 50 Flat 11

12 BELTERMO - FLEX Composition: -binding polymer bico-fibers (6-9%) -ammonium polyphosphate (fire-retardant agent) (8-9%) Flexible board Recommended use: insulation of the space between rafters, constructions of frame and frame-panel buildings and interior walls -stacking pallets on top of each other during storage is not allowed -cut with 5-10 cm oversize in length and width (compensation is achieved by compression of boards during installation) -boards installed in roofs or ceilings have to be secured from dropping out Standard size [mm] 1200*600, 1200*580 Nominal thickness [mm] Standard length [mm] 1200 Maximum width/minimum width [mm] 600/ 580 Bulk density [kg/m 3 ] 50 Declared thermal conductivity, λd [W/m*K] 0,038 Calculated thermal conductivity, λ [W/M*К] 0,040 [m 2 К/W] 1,05 1,58 2,11 2,63 3,16 3,68 4,21 4,74 5,26 5,79 6,32 Calculated thermal conductivity, R [(m 2 К)/W] 1,03 1,54 2,05 2,56 3,08 3,59 4,10 4,62 5,13 5,64 6,15 Water vapor diffusion resistance factor, µ 0,5 Sd value, Sd [m] 0,08 0,12 0,16 0,20 0,24 0,28 0,32 0,36 0,40 0,44 0,48 Compression strength[kpа] - Tensile strength perpendicular to surface [kpа] - Short-term water absorption [kg/m 2 ] - Specific heat capacity, с [J/(kg*К)] flat 5

13 BELTERMO TECHNICAL DATA CHARACTERISTICS / BOARD TYPE top ultra floor instal multi safe room kombi flex Density [kg/m 3 ] [w/m*к] 0,044 0,042 0,039 0,038 0,037 0,038 Calculated thermal conductivity, λ [w/m*к] 0,047 0,045 0,042 0,040 0,040 0,040 [m 2 К/w] Depends on thickness and density Calculated thermal resistance, R [(m 2 К)/w] Water vapor diffusion resistance factor, µ 3 0,5 Sd value, Sd [m] Depends on thickness, does not depend on density (except FLEX) Compression strength [kpа] Tensile strength perpendicular to surface [kpа] Short-term water absorption [kg/m 2 ] BELTERMO COMPARISON TABLE OF CONSTRUCTION MATERIAL SPECIFICATIONS MATERIAL DENSITY [kg/m 3 ] THERMAL CONDUCTIVITY, [w/m*к] SPECIFIC HEAT CAPACITY, [J/(kg*К)] ,037-0,044 0,038 Coniferous wood 500 0, Foam concentrate ,08-0, Ceram site concrete ,23-0, Brick , Mineral wool ,044-0, Expanded polystyrene (EPS) 40 0, Reinforced concrete , Steel INFORMATION ON BELTERMO BOARD PACKING Standard board size [mm] 1200*600 Standard board area [m 2 ] 0,72 Board thickness [mm] Boards per pallet [pc] Square meters per pallet [m 2 ] 144,00 129,60 100,80 95,04 80,64 72,00 54,72 46,08 34,56 28,80 23,04 20,16 17,28 15,84 14,40 12,96 11,52 Volume per pallet [m 3 ] 2,88 2,85 2,82 2,85 2,82 2,88 2,85 2,76 2,76 2,88 2,76 2,82 2,76 2,85 2,88 2,85 2,76 13

14 NOTES 14

15 NOTES 15

16