PROPOSED HOUSING PROJECT FOR RICHY PROJECTS (PVT) LTD IN SRI LANKA HOUSE TYPE - 01 PRICED BILL OF QUANTITIES

Transcription

1 PROPOSED HOUSING PROJECT FOR RICHY PROJECTS (PVT) LTD IN SRI LANKA HOUSE TYPE - 01 PRICED BILL OF QUANTITIES DATE - 28/08/2016

2 GRAND SUMMARY - TYPE 01 1 EXCAVATION AND EARTH WORK SLRs. 40, CONCRETE WORK SLRs. 116, MASONRY WORK SLRs. 284, ASPHALT WORK SLRs. 32, DOORS AND WINDOWS SLRs. 406, ROOF AND ROOF PLUMBING WORK SLRs. 336, FLOOR, WALL & CEILING FINISHES SLRs. 594, PAINTING WORK SLRs. 139, PLUMBING WORK / SANITARY INSTALLATIONS SLRs. 127, DRAINAGE WORK SLRs. 44, ELECTRICAL INSTALLATION SLRs. 147, TOTAL ESTIMATED COST SLRs. 2,270, Rate Per Sq.ft. : Rs Amount in words : Rupees Two Million & Two Hundred Seventy Thousand Three Hundred Sixty Five Only. Page 2

3 1.00 EXCAVATION AND EARTH WORK 1.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work The Contractors are requested to check ground water level, limitation of transport, limitation of site, conditions of the existing road for possibility of transportation of heavy equipment etc., prior to pricing this section of work The contractor shall arrange and obtain necessary permission from authorities for disposal and dumping of earth Contractor shall provide due protection to avoid any damages to temporary work, any new or old structures during excavation Surface treatment shall be measured only for floor area covered by building. Rate shall include for all the other surfaces like bottom of excavation, vertical and sloping sides of cuttings, etc Earth work supporting system and dewatering measured separately. Excavation Excavation for Column footings from reduced ground level except rock requiring blasting. Rate shall include for compacting the bottom of excavation, part return fill to excavation (backfilling) and rammed Ditto - for wall foundation from -do- Cube , , Hard Earth Filling 1.08 Approved hard earth filling from ground level to DPC level with available materials to be well compacted in not more than 6" thick layers as directed within the foundation. Cube , , Ditto - with imported material from -do- Cube , , TOTAL FOR EXCAVATION & EARTH WORK CARRIED TO SUMMARY SLRs. 40, Page 3

4 2.00 CONCRETE WORK 2.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work All concrete works shall comply to the specifications, filled into formwork and well consolidated around reinforcement by vibration Rate for concreting columns, walls shall include for kickers Rates shall include for plant for mixing, handling, hoisting, depositing, compacting, vibrating, curing, making good after removal of formwork and for any tests as necessary All cement and reinforcement steel to be an approved make and manufacturer All formwork shall be so constructed that no grout shall leak out during concreting Formwork is measured as the net contact surface 2.08 Formwork shall be plywood or steel shutter and GI pipe supporting system Rate for formwork shall include for necessary boarding supports, erecting, framing, removing, cleaning and wetting All reinforcement shall be as per specifications and relevant drawings All reinforcement shall be free from rust, grease, oil and plants 2.12 Rebending of incorrectly bend bares shall be not be allowed Rage shall include for cutting fabricating placing in position including, hangers, binding wire, spaces and waste Page 4

5 Mass Concrete " thick lean cement concrete 1:3:6 (1") screed under wall foundations. Sqrs , , " thick mass concrete 1:2:4 mixed under floor on well compacted earth Sqrs , , Lintels 2.16 Lintel at specified high doors,windows & walls with form work & steel /2" x 6" Lintels with form work and steel L.ft , Construction of 75mm thk. 600 mm wide RCC pantry tops including rowlock supporting brick work as per detail drawings & specifications. Rate to include form work, reinforcement, concreting, etc. L.ft , TOTAL FOR CONCRETE WORK CARRIED TO SUMMARY SLRs. 116, Page 5

6 3.00 MASONRY WORK 3.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work Rate for masonry works shall include for plumbing angles, forming rebates, square cutting and racking of joints for plastering Any cost due to rejection of poor quality bricks to be borne by the contractor. (Shall be in Grade 1 quality) 3.04 Rate shall include for stiffners unless otherwise measured seperately. Random Rubble Work 3.05 Random rubble masonry work in 1:5 cement sand mortar mix to foundation. Cube , , Cement Block Work " thick cement block work in approved common blocks and cement and sand 1:5 Sqrs , , TOTAL FOR MASONRY WORK CARRIED TO SUMMARY SLRs. 284, Page 6

7 4.00 ASPHALT WORK 4.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work The finish of the concrete slab shall be acceptable to the Consultants prior to carrying out the water proofing system Rate shall include for (a.) Clean with wire brush where necessary the concrete surface and remove dust, etc,. Prepare the concrete surface to receive the treatment The Tenderer shall refer the followings prior to pricing the items in this trade. a. All relevant drawings b. Specifications c. Location of the site d. Access to the site e. Type of water proofing suit to the nature of location and surface. f. Tender and Contract conditions 4.05 Contractor shall submit ten years guarantee for water proofing material and workmanship through his specialist sub contractor in the name of the Employer in an acceptable format Damp Proof Course 18 mm thick in cement sand 1:2 mix finished with application of two coats of hot tar blinded with sand gauge polythene below the ground floor slab. Rate shall include for necessary laps Approved water proofing system to toilets (Barralastic or equalent) floors & up to 1 feet in walls except 7 feets on the walls of shower areas Sqrs , , Sqrs , Sqrs , , TOTAL FOR ASPHALT WORK CARRIED TO SUMMARY SLRs. 32, Page 7

8 5.00 DOORS AND WINDOWS 5.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work All Aluminum and glazing work shall be carried out by an approved Specialist Contractor. Tenderer shall submit the name of the Sub Contractor and details along with the tender. All Aluminum extrusions shall be local manufacture of heavy duty and joint details as per manufactures specifications. powder coated not less than microns from approved source All aluminum frames shall be exterior quality powder coated (not less than microns) in approved colour with correct sizes and thickness as specified by the manufacturer to suit with the actual dimensions of openings including all surfaces and method of construction and strong enough to stand for the specified wind pressure. All fixings shall be to suit the location and environment of the project and shall be in materials free from corrosion with all primary and secondary framing, fixings and accessories All glass shall be as per the schedule depend on the size of the opening as per manufacturer's instruction in an approved manufacture to suit with the specific requirements Sealant, beadings and gaskets to be used, shall be appropriate to the climate of Sri Lanka and the environment of the location of this project and necessary technical information to be submitted for prior approval All ironmongery and fixing hardware for this section shall be high quality fittings and rates shall include for all necessary ironmongery Rate for Aluminum / Glass partitioning shall include for, other necessary openings required, all fixing hardware and approved ironmongery including locks should be "Union or equivalent. Page 8

9 5.08 Shop drawings of aluminum doors, windows and fixing details to be submitted for prior approval of the Engineer Rates to include All, Masonary work Steel work as Shawn in detailed drawings & specifications 5.10 Aluminium framed, double sashed, glazed door, D1 type, Size 4'-0" x 8'- 6" high overall with frame including all necessary high quality iron mongeries and accessories and necessary finish as per detail drawings and specifications. Nr , , Aluminium framed, single sashed, glazed door, type D2 size 3'- 3" x 7'-0" high overall -do Aluminium framed, single sashed, glazed door, type D3 size 2'- 9" x 7'-0" high overall -do Aluminium framed, glazed window type W size 6'-6" x 8'-6" high overall with frame including -do Aluminium framed, glazed window type W1 size 5'-0" x 5'-6" high overall with frame including -do Aluminium framed, glazed window type W2 size 2'-6" x 5'-6" high overall with frame including -do Aluminium framed, glazed fanlight type F1 size 2'-6" x 3'-6" high overall with frame including -do- Nr , , Nr , , Nr , , Nr , , Nr , , Nr , , TOTAL FOR TIMBER DOORS AND WINDOWS CARRIED TO SUMMARY SLRs. 406, Page 9

10 6.00 ROOF AND ROOF PLUMBING WORK 6.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work. Asbastos Roof 6.02 Asbastos (Corrugated) sheet roof to a pitch of 20 roof with timber framework consisting of timber wall plates, rafters, purlines, reepers, ridge plates, timber struts and timber beams etc., as per detail drawings & specifications mm x 230mm Valance board (Ginisapu) with necessary paint finish as per detail drawings & specifications. Colour to be decided by the architect. Sqrs , , L.ft , TOTAL FOR ROOF AND ROOF PLUMBING WORK CARRIED TO SUMMARY SLRs. 336, Page 10

11 7.00 FLOOR, WALL & CEILING FINISHES 7.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work All the tile joints to be filled in with coloured cement mortar 1:2 mix to match the colour of the tiles Rate shall include for all tile specials such as corners edges etc., 7.04 Rate for plastering shall include for providing expanded metal lath at different surfaces to avoid cracks Plaster of door window reveals not measured seperately. Rate shall include for the above cost. Floor Finishes 7.06 Supplying & laying of size 600mm x 600mm homogeneous procelain floor tiles, set in 18mm thk. cement sand motar 1:3 bedding with joints, pointed with and approved grout mix in floor areas. (Tile cost per ft 2 150/-) 7.07 Supply & fixing 75mm high Tile skirting to walls and finished with approved grout mix Sqrs , , L.ft , Toilet Floor & Wall " x 12" non skid ceramic floor tilling including joint and point in coloured cement to match on and including 3/4" thick cement and sand (1:3) screeded backing in toilet area. (Tile cost per ft 2 175/-) " x 12" coloured glazed ceramic wall tilling joint and point in coloured cement to match on and including 1/2" thick cement and sand (1:3) screeded backing in toilet area. (Tile cost per ft 2 175/-) Sqrs , , Sqrs , , Page 11

12 Wall finishes /8" thick cement lime and sand (1:1:5) plaster and finished with neat lime (internally) general and narrow surface in ground floor /8" thick cement lime and sand (1:1:5) plaster and finished with neat lime (externally) general and narrow surface in ground floor Sqrs , , Sqrs , , Special Wall Finishes 7.12 Smooth cement rendered Plinth plaster as specified. Sqrs , , Ceiling Finishes 7.13 Asbastos sheet flat ceiling on timber framework as per detail drawings & specifications Sqrs , , TOTAL FOR FLOOR, WALL & CEILING FINISHES CARRIED TO SUMMARY SLRs. 594, Page 12

13 8.00 PAINTING WORK 8.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work Rate for painting to plastered areas shall include for painting to reveals Rate shall include for all preparation of surfaces, cleaning down, smooth, protection and cleaning of floors, door window ad furniture, etc., 8.04 Painting cost of door window reveals not measured separately. Rate shall include for the above Sample approval should be obtained from Architect prior to start work. Internal 8.06 Prepare and apply one coat of primer and three coats of emulsion paint (CIC or asion) of approved colour and quality to the followings standard Colour in ground floor 8.07 Prepare and apply two coats of wall putty & cutting with sand papers of approved colour and quality to the followings standard Colour in ground floor (Including soffits) Sqrs , , Sqrs , , External 8.08 Prepare and apply one coat of primer and three coats of weather shield emulsion paint (CIC or asion) of approved colour and quality in the ground floor Sqrs , , TOTAL FOR PAINTING WORK CARRIED TO SUMMARY SLRs. 139, Page 13

14 9.00 PLUMBING WORK / SANITARY INSTALLATIONS 9.01 The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work Contractors are requested to refer Bill of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of contract and other relevant documents prior to pricing of this section of work This trade include the following works : a. Sanitary fittings, toilet accessories b. Water supply c. External sewerage and waste water disposal (up to the nearest city sewer manhole) d. Internal drainage (up to the nearest first manhole) 9.04 The Contractor shall provide all dimensions, and technical information, of all builders work to the Consultant in accordance with the programme of work Rate shall include for insurance during handling, rehandling, transport, storage, delivery to the point of installation and until handing over The tenderer shall submit the following information's on the items/equipments/ fittings quoted for together with the tender. 1 Make 2. Model. 3. Technical data 4. Country of manufacture 5. Delivery period 6. Lead time for manufacturing All control valves etc., shall be Hattersly, Crane, Pegler or equivalent make to the approval of the Consultant. Page 14

15 9.08 All pipes to be fixed to the soffit with necessary fixing accessories and pipe supports hangers etc. to the hot dipped galvanised finish to the approval of the Consultant Rates of plumbing work shall include for providing shop drawing and as built drawing All pipes to be fixed with necessary fixing accessories and pipe supports hangers etc (If required) to be hot dipped galvanised finish to the approval of the Consultant. Water Distribution System 9.11 Rates for all pipes shall include for pipes supports, saddles, clips, screws, nails, hardware fixing, jointing, materials cutting holes, chasing in brickwork, concrete etc., and making good the same in all trades concrete etc., and making good the same in all trades and under ground piping all necessary excavation, backfilling, planking and strutting, concrete bedding and hunch, dewatering and disposal of surplus material as directed. The proposal for pipe fixing method to be submitted for prior approval of the Consultant Rates for pipes shall include for burying in ground or walls or clipping to wall and all pipe supports fixed to under side of the soffit as required and for pipe fittings such as bends, tees, "Y" junctions, reducers, inspection openings, stopends,etc., as required All hot water pipes (supply and delivery) shall be polybutalene from approved European manufacture and in appropriate type as per specification All cold water pipes to be type 1000u. P.V.C and fittings to be in moulded type Rate for all pipes shall include for necessary pipe fittings such as bends, tees, Y junctions, angle valves, reducers inspection openings, stop ends, etc., reducers inspection openings, stop ends, etc., 9.16 Allow a sum for Plumbing work inside the bathroom including all extra over fittings for PVC pipes in ground floor Item , , Page 15

16 9.17 Allow sum for Isolating valves with valve sockets Item , , Sanitary Fittings 9.18 Cold water supply pipes to all WC cisterns, washbasins, sinks etc., shall be provided with approved quality angle valves and flexible hose. And these items shall measured with relavents toilet fittings 9.19 Supplying, fixing and connecting into service wash basin, in selected colour complete with chromium plated brass pillar tap, strainer waste with rubber waste plug with bead chin, all of approved quality and other necessary fitting. Rate to include for fixing, placing all pipe work & fittings chrome plated 12mm (1/2") dia. angle valve and stainless steel flexible coupling of approved quality, supports, brackets and all necessary pipe work and fittings, complete to working order. (PC 25,000/-) Nrs , , Supplying, fixing and connecting into service low level W.C Suite in selected colour with 9 lts. Capacity cistern, spray tap and fittings, double plastice seat cover and "P" trap with horizontal ouitlet, all of approved quality rate to include for, fixing, placing all pipe work & fittings, chrome plated 12mm (1/2") dia. angle valve and stainless steel flexible coupling of approved quality, supports, brackets and all necessary pipe work and fittings, complete to working order. (PC 30,000/-) Nrs , , Supply & Installation of head mixer shower with 1/2" dia chromium plated shower arm with flange projection wall mounted fix with head shower pulsator spray adjustable speed clean anti-lime system with ball - joint connection thread with stop cock including all necessary accessories complete with all connection to working order In ground floor. (PC 5,000/-) Nrs , , Installation of bathroom accessories Nrs , , Supply and installation of hand bidet with necessary accessories. (PC 1,500/-) Nrs , , TOTAL FOR PLUMBING WORK / SANITARY INSTALLATIONS CARRIED TO SUMMARY SLRs. 127, Page 16

17 10.00 DRAINAGE WORK The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work Rates for all ground piping shall include for pipe supports, saddles, clips, screws, nails hardware fixing and jointing materials, cutting holes chasing in brick work concrete etc., and making good the same in all trades and under ground piping, all necessary excavation,back filling,planking and strutting,concrte bedding and haunching,dewatering and disposal of surplus material as directed Rate shall include for laying pipes / hume pipes according to Specifications Rate shall include for using pipes / hume pipes tested to comply the relevant B.S. standards before laying and embedding in the concrete floor slab Rate shall include for easy cleaning maintenance provide a clean out at every 15m intervals All storm / waste / sewer pipes to be approved quality type 600 upvc or equivalent all fittings to be of moulded fittings Rigid U PVC pipes and fittings to conform BS4660, BS 5481, BS 4576, BS 3943, BS 4514 and BS 5255 wherever applicable to satisfy the specification and as per drawings Rates for all pipes to be fixed to the soffit with suitable pipe supports in hot dipped galvanised finish and with necessary fixing accessories etc., to the approval of the Consultant. Page 17

18 10.09 Rates for all piping shall include for pipe supports, saddles, clips, screws, nails, hardware fixing and jointing materials cutting holes, chasing in brick work, concrete etc., and making good the same in all trades. Rates for under- ground piping shall include for all necessary excavation and backfilling, planking and strutting, concrete bedding and disposal of surplus material as directed Rates for pipes shall include for pipe supports( in hot dipped galvanised finish and with necessary fixing accessories)fixed to soffit, walls or clipping to walls as required and for pipe fittings such as bends, tees, Y junctions, reducers, inspection, openings, stop ends, etc., as required All waste and sewer pipes shall be from approved manufacture to satisfy BS specification and with moulded fittings Waste Water Disposal System Manholes mm x 450mm waste water trapped manholes including excavation, backfilling, 4" thick grade 25 reinforced concrete (1:1 1/2:3 (3/4")) in base slab and wall with necessary reinforcement and form work with cement, sand 1:3 smooth rendering / Bituminous application at invert level (on base concrete) to maintain the water flow. And complete with RCC manhole cover including forming benching hunching to complete with all connections to working order. Nrs , , Waste Water Pipes Allow sum for Supply and laying of 2", 1 1/4" waste pipes. Rates for pipes shall include for burying in ground or walls or clipping to walls as required and for pipe fittings such as bends, tees, reducers etc Floor Trapped gulley 100 x 100 mm internally with stainless steel grating as per detail drawing and consultant approval in all toilet floors. Item , , s , , Page 18

19 Sewer Disposal System Sewer disposal system has been measured up to the nearest first manhole. All work beyond the first manhole has been measured under drainage and storm water disposal trade Rates for pipes shall include for all pipe fittings such as bends, tees, reducers, connectors cleaning point, etc., and inspection openings as necessary for total completion of the work All sewer pipes shall be in the appropriate type as in the specification with moulded fittings Rates for pipes shall include for fixing arrangements with clips and/or pipe supports in hot dipped galvanised finish and with necessary fixing accessories. The tenderer shall submit his proposal for pipe supports/fixing system as per specification to the approval of the Consultant Rates for all underground pipes shall include for all excavation, laid to gradient filling with selected materials and encasing the pipes with concrete as required. Sewer Manhols mm x 600mm sewer manholes with "p" trap including excavation backfilling, 4" thick grade 25 reinforced concrete (1:1 1/2:3 (3/4")) in base slab and wall with necessary reinforcement and form work with cement, sand 1:3 smooth rendering / Bituminous application at invert level (on base concrete) to maintain the water flow. And complete with RCC. manhole cover including forming benching hunching to complete with all connections to working order. Nrs , , Sewer Disposal Pipes Supply and laying of 4" dia under ground sewer pipes. Rates for pipes shall include for fixing along wall or burying in ground to required gradient. Item , , TOTAL FOR DRAINAGE WORK CARRIED TO SUMMARY SLRs. 44, Page 19

20 11.00 ELECTRICAL INSTALLATION The Contractors are requested to refer Bills of Quantities, General s, Pricing Preambles, Drawings, Specifications, Conditions of Contract, Special, Conditions of contracts and other relevant documents prior to pricing of this section of work.documents prior to pricing of this section of work All electrical fittings shall be of best quality approved fittings. All switches, socket outlets etc., shall be Clipsal, ABB or equivalent. All MCCB, MCB, RCCB, etc., shall be approved European/ Japanese makes Rates shall include for: (a) Supply, installing, testing and commissioning of the system for power and lighting. All complete to working order and to the entire satisfaction of the Consultant and the relevant Authorities. (b) Cutting, trimming, dressing, connection cables, cutting holes and chases holes in brick work, concrete and connecting cable with all accessories such as sockets connectors, conduit cable trays, cable glands and boxes hardware clips fixing, soldering and jointing materials. (c) Rate shall include for necessary trenching, conduits, all necessary materials, cables, fittings and clips, cutting holes and chases in brick work and concrete work complete with all accessories such as sockets, connections, cable glands and boxes hardware clips, soldering and jointing materials etc., for proper installing and laying of cables All materials, equipment wiring and workmanship shall confirm to local codes and specification, B.S.standards/latest I.E.E. regulations and Ceylon Electricity Board Specifications Rate for external lighting system shall include all materials suitable for external purpose as per specifications All cables ACL or equivalent Supplying of electricity for the building shall be in three phase line As specified in the drawing & specification. Page 20

21 Sub Main Cable Main cable from meter to distribution panel board. Item , , Allow for distribution panel board with internal cabling and enclosure (flush type) as per detail drawing & specifications to the approval of the consultant with all connection working order. s , , Earth Point Supply and install main earths 600mm x 600mm x 3mm copper plates and 25 x 3mm copper tape from roof top with all accessories. Item , , Point Wiring Rates for point wiring shall include for all cables, switches(1 way or 2 way as necessary) junction boxes, conduits, pull boxes, clips, earth cables, draw wires, wiring accessories, screws, nails, hardware, fixing and insulating materials, cutting holes, chases, make good the same in all trades, holders, ceiling boxes, flexible codes and any other wiring accessories require up to the final fixing point where ever necessary and complete with a holder and bulb All switches for lamp points to be Clipsal or equivalent make in acceptable range suitable for luxury interior. All socket outlets shall be Clipsal or equivalent make with a indicating bulb. All junction boxes shall be injection moulded type. All conduits shall be in reputed manufacture having SLS acceptable to the Consultant All lamp point wiring shall be in 1 mm2 Cu/PVC/PVC cable and 1mm 2 protective earth in PVC conduits including all accessories All ceiling fans points wiring to be also completed with fan hooks excluding fan and regulator.(fan and the regulator has been measured under lamp fittings) The contractor shall carry out the mega test and any other tests with a temporary switch and bulb with a holder at ceiling fan points and other similar items wherever necessary The contractor shall forward the conduit layout for prior approval of the Consultant. Page 21

22 11.16 Wall bracket light point s , , Pendant light point s , , Ceiling fan point. s , , Amp Socket outlet. s , , Amp Socket outlet s , , Bell s , , Light Fittings Rates shall include for fixing all complete to working order including all necessary accessories etc Wall bracket light fitting. s , , Pendant light fitting. s , , Ceiling fan.( KDK or equalent) s , , TOTAL FOR ELECTRICAL INSTALLATION CARRIED TO SUMMARY SLRs. 147, Page 22