Floor decoration. Residential and public use. Permanently damp environments and direct contact with water.

Transcription

1 Data seet Rigt angle profile for corners and wall and floor tile coverings. Decorative use as a metallic line. is a rigt angle, corner saped profile, wit bot sides of te same lengt. Tis design makes a very versatile profile, wit a wide range of applications in ceramic installations. It is te simplest solution for all kind of trims for ceramic wall tiles in wic you need to cover te tile edges. Its design wit sleek, straigt lines, makes tis profile specially recommended for rectified tiles corners and for tiles wit relief decoration. Recommended use Decorative line in ceramic wall tiles. Separation of wall tiles wit different designs or formats. Rigt angle trim for wall corners. Rigt angle trim for wall tiles: frames, corbels or low brick walls. Transition at same level between different floor tile types. Trim for ceramic floor tiles. Stair steps. Floor decoration. Residential and public use. Permanently damp environments and direct contact wit water. Materials Anodized aluminium. Cromed brass. Substrates All substrates suitable for ceramic tiles laying. A suitable substrate for laying ceramics wit te tin-bed metod must be clean, dry, compact, wit a roug texture and flat (deviations inferior to 3 mm every 2 m of surface). Features Side edge in 9, 10, 11 or 12.5 mm. 90º angle finis Side flange to ease installation. Having no ledges, it can be laid in direct contact wit te profile. Especially recommended for rectified tiles. Easy to cut wit every tile layer's everyday tools. Tere are special pieces for corners, wic avoid aving to miter te profile.

2 Profile types anodized aluminium. Aluminium profile manufactured by extrusion and anodized cemical treatment. Its cost-effectiveness makes tis profile te best solution for all kinds of projects. Features: Silver Matt/Gloss. Floor / Wall Indoor / Outdoor. Te anodization treatment protects aluminium from rust and limits scratces. Protect from any abrasive element wic could scratc te exposed profile surface. Anodized aluminium profiles are sensible to te combination of dampness and alkaline products like cement mortars. It is recommended to be extremely careful wen installing tem. Avoid contact wit cement mortars as far as possible an clean any mortar stain wic affects te exposed edge of te profile as soon as possible. cromed brass. Brass profile manufactured by extrusion, crome plated and gloss polised. Hig finis and gloss profile. Specially recommended for decorating indoor wall tiles. Features: Gloss Floor / Wall Indoors. Protect from any abrasive element wic could scratc te exposed profile surface. corner. Special piece for corners between profiles. Protects and enances te corner finis, avoiding aving to miter te profile. Available in te following finises: Anodized aluminium silver. Anodized aluminium gloss silver Cromed brass.

3 Instructions for use Coose te profile according to te tile tickness. We recommend to coose a profile at least 1 mm ticker tan te tile. Lay te tile wit te tin-bed metod, wit adesive and a notced trowel. Press te profile flange on te adesive and ceck tat it is covered by te bonding material. Level te profile wit te tile. Do not leave te profile above te tile level. As a general rule, we recommend to leave 1 mm joint between te profile and te tile. In stable substrates wit no movement risk, a minimum joint can be used. Before sealing te tiling joints, ceck tat te grouting material cosen does not scratc nor cemically alters te profile surface. If it does, cover te profile wit protective tape. Fill completely te joint between tile and profile wit grouting material. Never let te grouting material arden on te profile. Never use metallic tools or abrasive elements wic can scratc te profile surface. Cut te profile wit a and saw or wit a circular saw wit a suitable disc. Be extremely cautious wen cutting stainless steel profiles. Cleaning and maintenance Tese profiles do not need cleaning and maintenance different from te tiles in wic tey are installed. Use neutral cleaning products. Do not use products containing ydrocloric or ydrofluoric acid. In any case, we recommend you perform a previous test before use. Do not use abrasive or metallic elements wic can scratc te profile surface. Data Seet Conditions Tis is not a finised product tecnical seet. It belongs to a product wic, togeter wit oters, is te base of a ceramic tile laying system wit wic professionals perform teir job. Instructions in tis tecnical seet ave been written based on our experience and tecnical expertise, but tey ave to be considered as general recommendations, wic togeter wit tose for te rest of te products in te system, elp te professionals in teir job. As it is not possible to know all te features and conditions of a building job, professionals must consider it and, if deemed appropriate, perform a previous test to confirm weter te product is suitable for te job. Specially recommended in applications wic imply mecanical stresses or cemical reactions not described in tis tecnical seet. Te tecnical seet cannot reflect all te applications and conditions entailed in te use of a material, so, in situations not described in tis seet, we recommend to perform a previous test and refer to our tecnical department. Tis seet as been updated in January, 2013.

4

5 corner Cromed brass B /u B /u B /u B /u Anodized aluminium silver B /u B /u Anodized aluminium gloss silver B /u B /u Cromed brass corner B /u B /u Anodized aluminium silver corner B /u B /u Anodized aluminium gloss silver corner B /u B /u Profile lengt: 2500 mm Minimum packaging: 10 profiles butec building tecnology, S.A. Carretera Villarreal - Puebla de Arenoso (cv-20) km 2, Villarreal - Castellón - España. P.O. Box: Telepone (+ 34) Fax (+ 34) butec@butec.es - ttp://

6 Data seet Gold Collection Decorative profiles for wall tiles, 24K gold plated. Tey perfectly matc ceramics and give distinction and elegance to te most exclusive batroom settings. It is an alternative to te traditional ceramic frieze. Suitable for trimming corners and transitions between ceramic tiles. Tis type of profiles features square angle finises, wic allows for a no joint perfect fit wit rectified ceramic tiles. Its design wit sleek, straigt lines, makes tis profile specially recommended for te most luxurious settings. Recommended use: Decorative line in ceramic wall tiles. Separation of wall tiles wit different designs or formats. Rigt angle trim for wall corners. Rigt angle trim for wall tiles: frames, corbels or low brick walls. Residential and public use. Permanently damp environments and direct contact wit water. Do not use for floor tiles. Do not use in outdoor walls or pools. Materials 24K gold plated brass. Substrates All substrates suitable for ceramic tiles laying. A suitable substrate for laying ceramics wit te tin-bed metod must be clean, dry, compact, wit a roug texture and flat (deviations inferior to 3 mm every 2 m of surface). Features pro-mate 5 5 mm side edge. 90º angle finis Side flange to ease installation. Having no ledges, it can be laid in direct contact wit te profile. Especially recommended for rectified tiles. pro-part 8 mm side edge. 90º angle finis Side flange to ease installation. - - Having no ledges, it can be laid in direct contact wit te profile. Especially recommended for rectified tiles.

7 Gold Collection Bot sides of te profile ave exactly te same lengt. Side edges in 9, 10, 11 or 12.5 mm. 90º angle finis Side flange to ease installation. Having no ledges, it can be laid in direct contact wit te profile. Especially recommended for rectified tiles. Certifications/Standards: Corrosion tests in artificial atmospere or salt spray test (UNE-EN-ISO 9227) ave been performed. After 200 ours of test, no defects, cracks of traces of rust are observed. Profile types Gold plated brass Brass profiles, made by extrusion and 24K gold electroplating. Depending on te profile, a final polising is performed to acieve a gloss finis. Hig finis and gloss profile. Specially recommended for decorating indoor wall tiles. Features: Matt/Gloss. Wall tile Indoors. Protect from any abrasive element wic could scratc te exposed profile surface. Instructions for use Coose te profile according to te tile tickness. We recommend to coose a profile at least 1 mm ticker tan te tile. Lay te tile wit te tin-bed metod, wit adesive and a notced trowel. Press te profile flange on te adesive and ceck tat it is covered by te bonding material. Level te profile wit te tile. Do not leave te profile above te tile level. As a general rule, we recommend to leave 1 mm joint between te profile and te tile. In stable substrates wit no movement risk, a minimum joint can be used. Before sealing te tiling joints, ceck tat te grouting material cosen does not scratc nor cemically alters te profile surface. If it does, cover te profile wit protective tape. Fill completely te joint between tile and profile wit grouting material. Never let te grouting material arden on te profile. Be extremely cautious wen applying and cleaning grout. Never use metallic tools or abrasive elements wic can scratc te profile surface. - - Cut te profile wit a and saw or wit a circular saw wit a suitable disc. Be extremely cautious wen cutting stainless steel profiles.

8 Gold Collection Cleaning and maintenance Tese profiles do not need cleaning and maintenance different from te tiles in wic tey are installed. Use neutral cleaning products. Do not use products containing ydrocloric or ydrofluoric acid. In any case, we recommend you perform a previous test before use. Do not use abrasive or metallic elements wic can scratc te profile surface. Data Seet Conditions Tis is not a finised product tecnical seet. It belongs to a product wic, togeter wit oters, is te base of a ceramic tile laying system wit wic professionals perform teir job. Instructions in tis tecnical seet ave been written based on our experience and tecnical expertise, but tey ave to be considered as general recommendations, wic togeter wit tose for te rest of te products in te system, elp te professionals in teir job. As it is not possible to know all te features and conditions of a building job, professionals must consider it and, if deemed appropriate, perform a previous test to confirm weter te product is suitable for te job. Specially recommended in applications wic imply mecanical stresses or cemical reactions not described in tis tecnical seet. Te tecnical seet cannot reflect all te applications and conditions entailed in te use of a material, so, in situations not described in tis seet, we recommend to perform a previous test and refer to our tecnical department. Tis seet as been updated in January, 2013.

9 Gold Collection

10 Gold Collection 5 mm pro-mate 5 pro-mate 5 24K Gold B mm /u B mm /u pro-part 24K Gold B mm /u B mm /u pro-part 8 mm 24K Gold B mm /u B mm /u Profile lengt: 2500 mm Minimum packaging: 10 profiles butec building tecnologies, S.A. Carretera Villarreal - Puebla de Arenoso (cv-20) km 2, Villarreal - Castellón - España. P.O. Box: Telepone (+ 34) Fax (+ 34) butec@butec.es - ttp://