LANDSCAPING AQUA SPORT RECYFIX HICAP

Size: px
Start display at page:

Download "LANDSCAPING AQUA SPORT RECYFIX HICAP"

Transcription

1 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP HIGH CAPACITY SLOT DRAINAGE AND RETENTION SYSTEM FOR LARGER CONCRETE, ASPHALT AND PAVED AREAS. CHANNELS MANUFACTURED FROM 100% RECYCLED PE-PP. GRATINGS MADE FROM DUCTILE IRON. ONE MAN LIFT UP TO 300 SIZE. 1

2 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP HIGH CAPACITY DRAINAGE AND RETENTION SYSTEM FOR LARGER CONCRETE, ASPHALT AND PAVED AREAS. CONTENTS THE SOLUTION 2 RECYFIX HICAP COMPONENT FLOW CAPACITIES 4 RECYFIX HICAP WITH PE-PP INLET ADAPTOR 10 RECYFIX HICAP SERIES G WITH DUCTILE IRON INLET ADAPTOR 16 CASE STUDY 21 GULLIES 22 ACCESSORIES 24 INSTALLATION DRAWINGS 26 THE SOLUTION: RECYFIX HICAP The HICAP slot drainage system allows specifiers and contractors flexibility in design and installation, potentially reducing the number of channel runs normally required to drain a given area. This reduction means less underground excavations, materials and vastly reduced installation time. As there are fewer runs required, the surface s strength is not compromised whilst maintenance and cleaning are also reduced. What s more, all but the largest sizes weigh less than 25 so reducing the need for mechanical handling. To further reduce hassle on-site, end-of-run caps and pipe connection sockets are supplied with other connection points moulded into the sides and/or bottom of each channel. The different sizes offered are designed to easily link up with each other in a step-fall design, so as the volume of water increases downstream the chance of overflow is eliminated. ADVANTAGES For engineers: large selection of nominal widths from 100 to 680 for effective drainage solutions sturdy ductile iron integral, grating for all loading classes cost savings in the overall drainage installation costs less manholes and outlets provides a uniform visual appearance suitable for small and large areas For building contractors: quick and easy to install reduced breakages on site no separate gratings products upto 300 conform to Health and Safety one man lift requirement For customers: no expensive pipe installations required highly efficient solution easy to maintain the top inlet element matches all types of surface finishes 2

3 GRATINGS MADE OF STURDY SPHEROID DUCTILE IRON The integrated gratings are made of high-quality spheroid ductile iron GGG-50. Different grating designs are available for different application areas. In roadways and pedestrian areas cross- or lengthwise webs are used. In industrial areas the open slot option with a particularly large intake-cross section can be used. The ductile iron GGG-50 is extremely sturdy and is designed for particularly high strain caused e.g. by heavy goods vehicles or airplanes. PE-PP CHANNEL RECYFIX HICAP channels are made of eco-friendly PE-PP recycled plastic. They are lightweight and easy to install. Almost non-breakable they are easily connected with oneway tongue and groove joints. Special connectors ensure the smooth transition between differently sized channels. AT A GLANCE RECYFIX HICAP Channels are delivered to site with all the components factory assembled including the ductile iron slot inlets and inlet adapter High-capacity drainage system Channels manufactured from recycled materials with sturdy ductile iron gratinigs Suitable for heavy duty traffic areas Easy to handle and install Unique slot inlet design 3

4 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP ROBUST DRAINAGE AND RETENTION SYSTEM FOR ALL SIZES OF AREA. SERVICE AND SUPPORT FOR ARCHITECTS AND ENGINEERS We provide the following services for architects, engineers and building contractors: tender specifications for individual projects individual design hydraulic calculations site layout and detailed drawings 4 5 RECYFIX HICAP channels have been tested to comply with DIN EN 1433 and are suitable for installation in loading classes A 15 to F 900 CATE- GORY A 15 CATE- GORY B 125 CATE- GORY C 250 CATE- GORY D 400 CATE- GORY E 600 CATE- GORY F TYPES OF SLOTS RECYFIX HICAP Pedestrian Traffic Industrial 10 Industrial 4 D400 Heelsafe F900 Mesh F900 Slot 14 F900 Slot 28

5 RECYFIX HICAP channel 100 in PE-PP with inlet adapter and integrated ductile iron grating 2 The connector is used to connect to the next nominal size up. 3 RECYFIX HICAP channel 150 in PE-PP with inlet adapter and integrated ductile iron grating 4 T-connector for connecting to branches 5 RECYFIX HICAP channel 200 in PE-PP with inlet adapter and integrated ductile iron grating 6 RECYFIX HICAP channel 300 in PE-PPc with inlet adapter and integrated ductile iron grating 7 RECYFIX HICAP channel 680 in PE-PP with inlet adapter and integrated ductile iron grating 8 End cap End cap 680 with canal connection option 10 End cap with outlet TYPES OF SLOTS RECYFIX HICAP SERIES G All Applications RECYFIX HICAP Trash box F900 Slot 28 5

6 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP DRAINING LARGE AREAS WITH ONLY ONE CHANNEL RUN RECYFIX HICAP is so effective because large areas can be implemented with one single channel run. Starting with a nominal width of 100 it offers the option to expand up to 680. With this the installation height increases as well and a channel is created underground which cannot be seen above ground. What s seen is a drain line with a consistently narrow cover A gully which can be installed at any location of the channel run is used to connect to the sewer system or as a connection to other branches of the drainage system. The gully can also be used as a access unit. COMPARISON FLOW CAPACITY l/s KS 100 channel 01 KS 100 channel 010 KS 100 channel 020 RECYFIX HICAP 100 RECYFIX HICAP : CHANNELS WITH WATER VOLUME HICAP100 SHALLOW HICAP100 STANDARD HICAP150 HICAP200 HICAP300 HICAP680 18,4 litres 28,4 litres 46,0 litres 79,0 litres 171,4 litres 443,0 litres (volume per metre) 6

7 A PRACTICAL EXAMPLE: The following practical example proves the large drainageand retention capacity of RECYFIX HICAP channels: Logistics Centre Channel length: 356 m, divided: 66 m RECYFIX HICAP m RECYFIX HICAP m RECYFIX HICAP 680 Total drainage area: 10,730 m 2 Runoff coefficient (specified by the planner): 0,85 Rain yield factor (specified by the planner): 50/h Discharge capacity at end of channel run: 252 l/s One single channel run drains a surface of more than 10,000 m 2, directs the entire water amount over more than 356 m and at the end puts it out into the public sewer at one single point, at a rate of 252 l/s. 7

8 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP EFFECTIVE DRAINAGE SAMPLE CALCULATION: RECYFIX HICAP Traffic slot The following sample calculation points out the hydraulic advantage of the RECYFIX HICAP channel: Flow capacity of a traffic slot grating from the adjoining test result, determined at the Technical University in Prague: Coon Precipitation 4,0 l/s per metre 50 per/h 50/h = 0,83 l/s 4,0 l/s/m x 3600secs 50/hr = 288m 2 Precipitation 50 per hour Flow capacity of a traffic slot grating 4 l/s per metre Drainage area 144m 2 8

9 Intake-cross section and flow capacity of RECYFIX HICAP Series Type Intake-cross section capacity litres per second l/s* RECYFIX HICAP Pedestrian 3,8 With ductile iron slot and PE-PP inlet adaptor Traffic 4,0 Industrial - 14 slot 3,8 Industrial - 28 slot 3,6 RECYFIX HICAP SERIES G With ductile iron slot and inlet adaptor All Models - 20 slot * measured during excess backwater testing at 10 excess backwater 3,7 RECYFIX HICAP RECYFIX HICAP SERIES G Pedestrian Traffic Industrial Industrial All Applications D400 Heelsafe F900 Mesh F900 Slot 14 F900 Slot 28 F900 Slot 28 RESULT OF EXAMPLE: 1 m RECYFIX HICAP Traffic grating, drains an area of 288m 2 at a precipitation of 50 per hour. Drainage area 144m 2 9

10 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP WITH PE-PP INLET ADAPTOR RECYFIX HICAP For installation in concrete, asphalt and paved areas Direct driven surface made of ductile iron GGG-50 Inlet adaptor and channel body made of PE-PP 10

11 1 unique design of slot inlet 2 inlet adapter (funnel) PE-PP 3 concrete casing available top heights: 200 and channel body made from corrosion-resistant PE-PP 5 11

12 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP 100 RECYFIX HICAP shallow Invert depth 436 Type Category Drainage cross section 184 cm high funnels, available for F900 applications Article No. Pedestrian D , Traffic F , Industrial 14 slot F , Industrial 28 slot F , RECYFIX HICAP standard Invert depth 537 or 637 Type Category Article No. Pedestrian D , Traffic F , Industrial 14 slot F , Industrial 28 slot F , Drainage cross-section 284 cm high funnels, available for F900 applications 12

13 RECYFIX HICAP 150 and 200 RECYFIX HICAP 150 Invert depth 551 or 651 Type Category Article No. Pedestrian D , Traffic F , Industrial 14 slot F , Industrial 28 slot F , Drainage cross-section 460 cm high funnels, available for F900 applications RECYFIX HICAP 200 Invert depth 636 or 736 Type Category Article No. Pedestrian D , Traffic F , Industrial 14 slot F , Industrial 28 slot F , Drainage cross-section 790 cm high funnels, available for F900 applications 13

14 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP 300 and 680 RECYFIX HICAP 300 Type Category Invert depth 894 or 994 Article No. Pedestrian D , Traffic F , Industrial 14 slot F , Industrial 28 slot F , Drainage cross-section 1714 cm high funnels, available for F900 applications RECYFIX HICAP 680 Invert depth 1010 or 1110 Type Category Article No. Pedestrian D , Traffic F , Industrial F , Drainage cross-section 4150 cm high funnels, available for F900 applications 14

15 RECYFIX HICAP TENDER PROPOSALS RECYFIX HICAP CHANNELS Proposed specifications for NW 100,150 and 200 ; all types 1. _ lin.m RECYFIX HICAP _ type _, nominal width _, consisting of en closed channel body in PE-PP, with inlet adapter, height _, and integral ductile iron slot inlet with _ inlet design, load class A 15 to F 900, length 1000, art. no. _ All to be supplied and laid in accordance with the manufacturer s installation instructions. Quality in acc. with DIN EN ISO 9001:2000 Distributed by: Hauraton Limited Unit 4 Frenches Avenue Dunstable, Bedfordshire LU6 1BH Tel: Fax: technical@hauraton.co.uk Proposed specifications for NW 300 and 680 ; type 750/200 and type 860/ _ lin.m RECYFIX HICAP _ type _, nominal width _, consisting of en closed channel body in PE-PP, with inlet adapter, height 200, and integral ductile iron slot inlet with _ inlet design, loading category A15 to E 600, length 1000, art. no. _ All to be supplied and laid in accordance with the manufacturer s installation instructions. Quality in acc. with DIN EN ISO 9001:2000 Distributed by: Hauraton Limited Unit 4 Frenches Avenue Dunstable, Bedfordshire LU6 1BH Tel: Fax: technical@hauraton.co.uk Proposed specifications for NW 300 and 680 ; type 750/300 and type 860/ _ lin.m RECYFIX HICAP _ type _, nominal width _, consisting of en closed channel body in PE-PP, with inlet adapter, height 300, and integral ductile iron slot inlet with _ inlet design, load class A 15 to F 900, length 1000, art. no. _ All to be supplied and laid in accordance with the manufacturer s installation instructions. Quality in acc. with DIN EN ISO 9001:2000 Distributed by: Hauraton Limited Unit 4 Frenches Avenue Dunstable, Bedfordshire LU6 1BH Tel: Fax: technical@hauraton.co.uk GRATINGS 4. _ no. RECYFIX HICAP _ type _, galvanised end cap, for either end of channel, art. no. _ 5. _ no. RECYFIX HICAP _ type _, galvanised end cap, WITH OUTLET, with horizontal KG pipe spigot DN _, art. no. _ 6. _ no. RECYFIX HICAP _ type _, connector plate from NW _ to NW _, art. no. _ RECYFIX HICAP GULLIES, AND ACCESS POINTS 7. _ no. RECYFIX HICAP GULLY _ type _, ductile iron cover and frame, thermoplastic intermedile and base mouldings, art. no. _ 8. _ no. RECYFIX HICAP ACCESS POINT _ type _, ductile iron cover and frame, thermoplastic intermedile and base mouldings, art. no. _ All to be supplied and laid in accordance with the manufacturer s installation instructions. Quality in acc. with DIN EN ISO 9001:2000 Distributed by: Hauraton Limited Unit 4 Frenches Avenue Dunstable, Bedfordshire LU6 1BH Tel: Fax: technical@hauraton.co.uk TENDER PROPOSALS ARE AVAILABLE AT 15

16 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP SERIES G WITH DUCTILE IRON INLET ADAPTER RECYFIX HICAP SERIES G For direct installation of block pavement, flagging and asphalt Slot and inlet adapter made from ductile iron GGG-50 Channel body made from PE-PP SERIES G 16 16

17 RECYFIX HICAP G is intended for block paving schemes and as an alternative to RECYFIX HICAP. Refer Hauraton sales office for details of this range. 1 unique design of slot inlet 2 inlet adapter (funnel) ductile iron 3 concrete casing available top heights: 200 and channel body made from corrosion-resistant PE-PP 5 ADVANTAGES: SLOT ATTACHMENT MADE OF SPHEROIDAL DUCTILE IRON: SUPER STURDY AND NONCORROSIVE RECYFIX HICAP G is super sturdy and is used in areas with extreme loads. What s revolutionary is the use of the ductile iron material. Spheroid ductile iron GGG-50 combines the properties stability (slotted channels made of steel easily deform with the use of heavy pavements) and durability (galvanised steel can easily corrode in moist soils, losing the zinc protector, stainless steel is significantly more expensive). VISUALLY DISCRETE AND EXTREMELY DURABLE The virtually invisible channels are especially suited for the design of appealing sites and architecturally challenging areas where large-scale paving stone or natural stone pavements are oftentimes used: dynamic strains from traffic put great force on the upper edges of the channels. That s where the ductile iron attachment with integrated intake adapter offers especially great resistance against the emerging forces and prevents damage. 17

18 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP SERIES G 100 and 150 RECYFIX HICAP G 100, PE-PP body with slot & inlet adaptor made of spheroidal ductile iron loading capacity up to F900 Type 365 Article No. Type , RECYFIX HICAP G 150, PE-PP body with slot & inlet adaptor made of spheroidal ductile iron loading capacity F900 Type 380?!? Article No. Type ,

19 RECYFIX HICAP SERIES G 200 and 300 RECYFIX HICAP G 200, PE-PP body with slot & inlet adaptor made of spheroidal ductile iron loading capacity F900 Type 465 Article No. Type , RECYFIX HICAP G 300, PE-PP body with slot & inlet adaptor made of spheroidal ductile iron loading capacity F900 Type 750 Article No. Type ,

20 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP SERIES G TENDER PROPOSALS RECYFIX HICAP SERIES G CHANNELS Proposed specifications for NW 100, 150, 200 and 300 ; all types 1. _ lin.m RECYFIX HICAP G _ type _, nominal width _, existing of PE-PP channel body and inlet adaptor made from ductile iron, height 302 with end-to-end slot on the surface, SW 20, loading capacity A 15 - F 900, length 1000, art. no. _ All to be supplied and laid in accordance with the manufacturer s installation instructions. Quality in acc. with DIN EN ISO 9001:2000 Distributed by: Hauraton Limited Unit 4 Frenches Avenue Dunstable, Bedfordshire LU6 1BH Tel: Fax: technical@hauraton.co.uk END CAPS AND CONNECTOR PLATE 2. pcs. RECYFIX HICAP _ type _, galvanised end cap, for either end of channel, art. no. _ 3. pcs. RECYFIX HICAP _ type _, galvanised end cap, WITH OUTLET, with horizontal KG pipe spigot DN _, art. no. _ 4. pcs. RECYFIX HICAP _ type _, connector plate from NW _ to NW _, art. no. _ TENDER PROPOSALS ARE AVAILABLE AT 20

21 THORNTON WASTE TECHNOLOGY PARK, LANCASHIRE, UK. Located on the western bank of the River Wyre, the Thornton Waste Technology Park developed by Global Renewables will be one of the UK s first operational UR-3R (Urban Resource - Reduction, Recovery and Recycling) process facilities that integrates waste sorting systems and proven anaerobic waste digestion technologies. This innovative development in waste recycling is scheduled to be operational in It is expected the facility will recover valuable resources, such as glass, metal, paper, plastic, land nutrients and energy in the form of usable gasses from up to 225,000 tonnes of waste generated every year by households in Blackpool, Fylde, Wyre and the surrounding areas. The riverside location has meant particular attention was paid to rainwater run-off and pipe depth issues in general. Influenced by the tidal river, the water table can be only 0.7 metres below the surface. Ground-works contractor, Churngold were keen to specify an integrated scheme that would offer effective drainage of the whole facility. Additionally, any drainage installed had to withstand the compression and twisting forces exerted by the numerous fully laden waste collection trucks accessing the site. In order to optimise the environmental benefits of the whole project, all aspects of its construction and operation had to taking into account the strict ecological requirements demanded for the facility. For this reason drainage components made from recycled materials were considered. RECYFIX HICAP high capacity slot drainage channels were supplied for the access and service areas around the site. The 775 metres of RECYFIX HICAP channels specified for the project are made from 100% recycled Polyethylene-Polypropylene (PE-PP) derived from post consumer and post industrial sources. HICAP allows hydraulic engineers and contractors wide flexibility during the design and installation stages by reducing the number of channel runs normally required. This reduction means less foundation materials being used with fewer underground excavations, all resulting in a more environmentally friendly installation. Not only is no prime polymer used in the manufacture of RECYFIX channels but it is the shredded recycled material, not reformed pellets, that is fed directly into the injection moulding machines providing even more savings. Including their ductile inlet slot components, each RECYFIX HICAP unit delivered to the site weighed less than 25, so complied with current one-man-lift legislation. This not only reduced the need for heavy lifting hoists, but, compared with the concrete equivalent units, reduced the number of delivery lorries by approximately half. In addition, the recycled components are very impact resistant making them almost unbreakable and much less vulnerable to the usual on-site damage. Using modern reclamation techniques, components are also recyclable as their strength allows them to release relatively easily from their concrete foundations. James Baylis, Churngold Group, Project Environmental Manager for the project was pleased with the technical support from Steve Wiseman, Hauraton s Project Manager and how easy the drainage systems were to install, Being made from recycled materials the systems were in keeping with the thinking behind the Waste Technology Park and it was good to know we helped close the loop by using components made from recycled materials in the construction of the new plant. 21

22 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP GULLIES A B C RECYFIX HICAP Gully and Access point top covers and frames are made from ductile iron. Intermediate and base components are one piece mouldings made from 100% recycled thermoplastic. Each component complies with manual handling regulations. A combination of intermediate components, which vary in height, provides the overall depth required. see tables. All components securely interlock when assembled on site providing a strong and robust structure. Closing plate D A = B = C = D = 100 Ductile iron cover and frame 25 Intermediate moulding 150 Intermediate moulding 150 Base moulding with closing plate RECYFIX HICAP Gullies * All gullies and access chambers are installed in sections made up of A,B,C or D components shown above. Each component complies with manual handling regulations for a one man lift. For F900 gullies refer page 40 in the Hauraton CIVILS catalogue. For information on gullies for RECYFIX HICAP 680 channels please telephone the Hauraton sales office. AT A GLANCE Ductile iron cover and frame Overall One piece intermediate and base mouldings not fabricated or mitred Compatible with all RECYFIX HICAP channels up to and including the HICAP 300 Entry points are easily made to allow access into the chamber for pipes etc Suitable for heavy duty applications having been tested to D400 loading Overall Overall Article No. HCG 100 comprising 1xA 1xB 5xC 1xD HCG100 HCG 150 comprising 1xA 1xB 5xC 1xD HCG150 HCG 200 comprising 1xA 1xB 6xC 1xD HCG200 HCG 300 comprising 1xA 1xB 8xC 1xD HCG300 RECYFIX HICAP Access points Overall Overall Overall Article No. HCA 100 comprising 1xA 1xB 3xC 1xD HCA100 HCA 150 comprising 1xA 1xB 3xC 1xD HCA150 HCA 200 comprising 1xA 1xB 4xC 1xD HCA200 HCA 300 comprising 1xA 1xB 6xC 1xD HCA300 22

23 RECYFIX HICAP GULLIES Typical Installation Detail For more installation details, go to and click on Installation advice. CAD drawings are also available. END CAP WITH OUTLET 23

24 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP & HICAP G ACCESSORIES RECYFIX HICAP 100, Accessories End cap 100, type 365 End cap 100 with outlet, type 365 Connecting Plate 100 > 150, type 365 End cap 100, type , End cap 100 with outlet, type , End cap type , End cap with outlet, type , Connecting plate 100 > 150, type , Item No. RECYFIX HICAP 150, Accessories End cap 150 End cap 150 with outlet Connecting plate 150 > 200 End cap , End cap 150 with outlet , Connecting plate 150 > , Item No. RECYFIX HICAP 200, Accessories 24 End cap 200 End cap 200 with outlet Connecting plate 200 > 300 End cap , End capp 200 with outlet , Connecting plate 200 > , Item No.

25 RECYFIX HICAP 300, Accessories End cap 300 End cap 300 with outlet Connecting plate 300 > 680 End cap , End cap 300 with outlet , Connecting plate 300 > , Item No. RECYFIX HICAP 680, Accessories * End cap 680, 2-parts * Only for RECYFIX HICAP Type F End cap , Item No. RECYFIX HICAP Trash box, Accessories Trash box with galvanised angle housing and boltless locking system SIDE-LOCK, ductile iron grating cl. F 900 and 2-sided pipe connection possibility. Applicable for variable nominal size intersection on any position of the channel run. Also multipart constructions are possible. For the installation of trash boxes please ask in the factory. 25

26 CIVILS LANDSCAPING AQUA SPORT RECYFIX HICAP INSTALLATION Typical Installation Details For more installation details, go to and click on Installation advice. CAD drawings are also available. RECYFIX HICAP - Installation drawings A Installation example Concrete cl. F 900 min. b, max. 150 cm 3-5 Expansion joint A B Roadway concrete Base course b (30 cm) h approx. 92 cm B C C Frost resistant sub-base d D approx. 56 cm D Category according to EN 1433 Foundation: width b / thickness d / height h (in cm) The named concrete quality is a minimum quality EN / Concrete quality of stretcher DIN Concrete quality of foundation A 15 B 125 C 250 D 400 E 600 F / 20 / 65 C 30/37 XF4 C 25/30 XF1 Applying to following channel systems: RECYFIX HICAP 200 Typ 465/300 E The installation examples / advise constantly are adapted to the technical conditions. With new editions older expenditures lose their validity. Before planning or installation please verify the current version at Condition: Our general installation instructions apply. Surface: Concrete E 1 2 Description: RF-HICAP-200_Typ _Einbau Klasse F 900 in Beton_GB Drawing-no.: D:\pdmwe\cad-originale\inventor\2007\05\0\ idw For more installation details, go to and click on Installation advice. CAD drawings are also available.

27 RECYFIX HICAP SERIES G INSTALLATION Typical Installation Details For more installation details, go to and click on Installation advice. CAD drawings are also available. RECYFIX HICAP SERIES G - Installation drawings Installation example in asphalted areas class F Durable overhang A A h Wearing course Binder course Base course B b B Frost resistant sub-base d C C Category according to EN 1433 / DIN V Foundation: with b / thickness d / height h (in cm) The named concrete quality is a minimum quality A 15 B 125 C 250 D 400** E 600 F / 10 / / 10 / / 15 / / 15 / / 20 / / 20 / 19 Applying to follwing systems: RECYFIX HICAP G 100, 150, 200, 300 without danger of frost on the lateral support EN / DIN with danger of frost on the lateral support C 20/25 C 20/25 C 20/25 C 20/25 C 20/25 C 20/25 C 20/25 XF1 C 20/25 XF1 C 20/25 XF1 C 20/25 XF1 C 20/25 XF1 C 20/25 XF1 The installation examples / advise constantly are adapted to the technical conditions. With new editions older expenditures lose their validity. Before planning or installation please verify the current version at In building construction is a sealing layer below the channels necessary. ** no limitation Condition: Zeichnungs-Nr Our general installation instructions apply. Format DIN scale A4 1:10 Unit 4, Frenchs Avenue LU6 1BH Dunstable / Bedfordshire Tel Fax technical@hauraton.co.uk Bezeichnung: RF-HICAP-G-200 Einbau in Asphalt D 400 Installation example in asphalted areas class F Durable overhang Pavement Pavement bedding Base course Frost resistant sub-base The installation examples / advise constantly are adapted to the technical conditions. With new editions older expenditures lose their validity. Before planning or installation please verify the current version at In building construction is a sealing layer below the channels necessary. ** no limitation For more installation details, go to and click on Installation advice. CAD drawings are also available. 27

28 UKRECYFIXHICAP 10/2009 HAURATON PARTNER HAURATON LIMITED UNIT 4, FRENCHS AVENUE DUNSTABLE, BEDFORDSHIRE LU6 1BH TEL: FAX: WEB: This publication is issued subject to alteration or withdrawal without notice. The illustrations and specifications are not binding in detail. All offers are subject to the Company s current terms and conditions of sale, a copy of which is available on request. 28