SXVS HEAVY DUTY SUMP PUMPS

Transcription

1 SXVS HEAVY DUTY SUMP PUMPS VOLUME ONE ISSUED FEBRUARY 21, 13

2 SXVS HEAVY DUTY SUMP PUMPS Vertical, shaft driven centrifugal slurry pumps. Rugged pumping solution for the transfer of slurries and large particles from sumps, pits, tanks and other fixed submersible applications. HEAVY DUTY SUMP PUMPING SXVS heavy duty sump pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abraisive and high density slurries from sumps, pits and other submersible sources. Models are available in sizes ranging from 4mm to 2mm (1.6-1 inches) discharge and are capable of flow rates from to 3 litres per second (79-4 USGPM) at heads of up to 4 metres (13ft). The heavy duty design of the SXVS pumps allows the passage of large particles with a diameter of up to mm. Pumps will continue to operate even when the top inlet is not submerged, allowing the liquid level to to be lowered to the bottom of the sump or pit. Suction extension pipes of up to 2 metres (6.4 feet) in length can be added to the bottom inlet of the pump to extend the pumping depth. Designed as a fixed installation the SXVS provides reliable pumping performance with minimal maintenance requirements and simple servicing. CANTILEVERED SHAFT The standard SXVS pumps feature a cantilevered shaft which is up to 24mm (7.7 feet) long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps. HEAVY DUTY WET END Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications. COLUMN AND DISCHARGE PIPES Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available. VERSATILE DRIVE OPTIONS SXVS pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation. SOUTHERN CROSS SXVS HEAVY DUTY SUMP PUMP 2 SXVS VERTICAL SHAFT SLURRY PUMPS

3 REMOVABLE STRAINERS SXVS pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement. L MODELS EXTENDED SHAFT The extended shaft L model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits. L MODEL WITH EXTENDED SHAFT AND SHAFT SEAL The SXVS Heavy Duty Sump Pumps are capable of providing reliable and efficient performance for the transfer of abraisive and high density slurries from sumps, pits and tanks in a wide range of mining, processing and heavy industrial applications. SXVS VERTICAL SHAFT SLURRY PUMPS 3

4 TECHNICAL DATA SELECTION CHART P 6Q 1R 1S S 2S Total Head (ft) Flow Rate (m 3 /h) MATERIALS OF CONSTRUCTION Description Standard Options Shaft 414 Mild Steel Available on Request 1 Housing Column Cast Iron Mild Steel Upper Strainer Rubber Cast Iron Lower Strainer Back Liner Cast Iron Pump Casing Rubber Lined Rubber Discharge Pipe Adaptor Plate Mild Steel Mild Steel Rubber Lined Mild Steel / Composite 1. Vertical shaft material options are available to suit a wide range of applications and installations. Contact Pentair Southern Cross to discuss the availability of material options. CANTILEVERED SHAFT EXTENDED SHAFT 4 SXVS VERTICAL SHAFT SLURRY PUMPS

5 TECHNICAL DATA DIMENSIONS Model Length A B C D E F G H J K L M N P Q R S 4P * PR Q QR * R RR * S SR * S SR * S SR * * Standard length. SXVS VERTICAL SHAFT SLURRY PUMPS

6 SXVS 4PR RUBBER LINER AND IMPELLER Size Dia. 1.6 P * 47.2 Rubber Lined High Tensile Steel Rubber % 8 3% 3% 4% % 3% SXVS VERTICAL SHAFT SLURRY PUMPS

7 SXVS 4P METAL LINER AND IMPELLER Size Dia. 1.6 P * % 3% 3% % % SXVS VERTICAL SHAFT SLURRY PUMPS 7

8 SXVS 6QR RUBBER LINER AND IMPELLER Size 2. Q * 9.1 Rubber Lined High Tensile Steel Dia. 11 Rubber % 3% 4% 4% 8 % 1% % 4% SXVS VERTICAL SHAFT SLURRY PUMPS

9 SXVS 6Q METAL LINER AND IMPELLER Size 2. Q * 9.1 Dia % 3% 3% 4% % 1 13 % 1% 2 1 % 8 48% SXVS VERTICAL SHAFT SLURRY PUMPS 9

10 SXVS 1RR RUBBER LINER AND IMPELLER Size 4 R * 7.9 Rubber Lined High Tensile Steel Dia. 14. Rubber % 3% 4% % % 1 3 6% % % SXVS VERTICAL SHAFT SLURRY PUMPS

11 SXVS 1R METAL LINER AND IMPELLER Size 4 R * 7.9 Dia % 3% 4% 4% % % 6% % SXVS VERTICAL SHAFT SLURRY PUMPS 11

12 SXVS 1SR RUBBER LINER AND IMPELLER Size 6 S * 82.7 Rubber Lined High Tensile Steel Dia Rubber % 3% 4% 4% % 1 3% 3 9 6% % SXVS VERTICAL SHAFT SLURRY PUMPS

13 SXVS 1S METAL LINER AND IMPELLER Size 6 S * 82.7 Dia % 3% 4% 4% % 2% % % SXVS VERTICAL SHAFT SLURRY PUMPS 13

14 SXVS S METAL LINER AND IMPELLER Size Dia. 8 S * % 4% % 6% % SXVS VERTICAL SHAFT SLURRY PUMPS

15 SXVS 2T METAL LINER AND IMPELLER Size Dia. 1 T * % 3% 4% % % 6% % SXVS VERTICAL SHAFT SLURRY PUMPS 1

16 PENTAIR SOUTHERN CROSS 8618 Warrego Highway, Withcott, QLD 432, Australia. All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. A.B.N Pentair, Ltd. All Rights Reserved. 12 Pentair Southern Cross