EDGE PROTECTION SPECIALIST WE SAVE LIVES

Transcription

1 EDGE PROTECTION SPECIALIST WE SAVE LIVES 2016 SAFETYRESPECT BOX 69 SE ÖSTERSUND SWEDEN TEL +46 (0)

2 2 EDGE PROTECTION SPECIALIST CONTENTS 2. INTRODUCTION 4. COMPANY PRESENTATION 6. SERVICES 8. QUALITY-ASSURED 9. RESPONSIBILITY, LAWS, CAUSES EDGE PROTECTION SOLUTIONS 12. SLAB EDGES 14. BALCONIES 15. WALL OPENINGS 16. SHAFTS AND FLOOR OPENINGS 18. STAIRS 20. BEAMS AND COLUMNS 24. PREFABRICATED ELEMENTS 28. CONCRETE CASTING 29. CASTING IN SITE 30. BLOCKING 31. SCAFFOLDINGS 32. ROOFS AND FACADES 36. HALL CONSTRUCTIONS 40. FALLING OBJECTS 45. ATTACHMENTS 46. TRANSPORTATION/WAREHOUSING PRODUCT OVERVIEW 48. STANDARD SYSTEM 51. FLEX SYSTEM 52. HALL SYSTEM 53. SAFETY FAN SYSTEM 54. OTHER KONTACT INFORMATION 56. HEAD OFFICE AND DEPOTS USER MANUALS Separately available to the following systems. EDGE PROTECTION SYSTEM HALL SYSTEM FLEX SYSTEM SAFETY FAN SYSTEM SAFETYRESPECT Box 69 SE Östersund Sweden +46 (0) SAFETYRESPECT SAVES LIVES BY BEING A SPECIALIST IN EDGE PROTECTION FOR THE CONSTRUCTION INDUSTRY Each year a great number of accidents take place at working sites where workers are injured or killed unnecessarily. These accidents are to a high degree fall accidents that result in big and difficult consequences for those who are affected. We want to change that. There are many factors to consider, but with a correct attitude, higher competence and smarter products we are convinced that it is possible to create a positive change. The basis of our product development is our customers needs of safe construction work places and the laws and norms that apply. We participate throughout the whole construction process in order to help our customers in all types of edge protection situations that may occur. We carry out estimations, produce documentation, produce and deliver edge protection solutions and safety checks to all kinds of construction projects. Our edge protection products are manufactured mainly in our own modern factory, something that creates flexibility, a high degree of quality assurance and the possibility of controlling the capacity. We offer sales, rentals and installation of our edge protection solutions provided with services and logistics via our own depots. With our strong commitment and high competence we work in close relationship with our customers and create the highest possible safety accompanied with the best total economy. Per Ramberger Managing Director of SafetyRespect

3 EDGE PROTECTION SPECIALIST 3 Edge protection from SafetyRespect decreases the number of accidents and lowers the company s costs for industrial injuries.

4 4 EDGE PROTECTION SPECIALIST WE SAVE LIVES SafetyRespect saves lives by being specialists in edge protection in the construction industry. The basis of our product development is our customers need for safe construction sites and laws and norms that are applicable. We are present throughout the whole construction process in order to help our customers in all edge protection situations that may occur. We carry out estimations, produce documentation, produce and deliver edge protection solutions for all types of construction projects. Our edge protection products are manufactured mainly in our own modern factory, which gives us flexibility, quality assurance and possibility of controlling the capacity. We offer sales, rental and installation of our edge protection solutions, with service and logistics via our own depots. With our strong commitment and clear presence we work closely with our customers and create the highest possible degree of safety with the best total economy. SPECIALISTS As specialists in edge protection we are present throughout the whole construction process in order to help our customers in all edge protection situations that may occur. We carry out estimations, produce documentation, produce and deliver edge protection solutions for all types of construction projects. With complete commitment and competence we work in close relationship with our customers and create the highest possible degree of safety with the best total economy. DEVELOPMENT The basis of our product development is our customers needs of safe construction sites and the laws and norms that apply. Development is driven forward by offering technical support to our customers and by innovation of new edge protection products and systems. MANUFACTURE Our edge protection products are manufactured mainly in our own modern factory. This creates flexibility, a high degree of quality assurance and the possibility of controlling the capacity. The result is short lead times and good possibilities for customisation. DEPOTS We offer sales, leasing and installation of our edge protection solutions. Logistics, the showroom and availability are managed mainly via our own depots, where the proximity to our customers is an important factor. SERVICE With our strong commitment and clear presence we help our customers to maintain the highest possible degree of safety accompanied by costeffective and smart edge protection solutions. In our service offerings are included a number of services such as designing, edge protection analyses, training, installation and safety assurance by using SafetyCheck.

5 EDGE PROTECTION SPECIALIST 5

6 6 SERVICES SERVICES By using the services of SafetyRespect a cost-effective and safe construction site is created. We offer installations of various types of edge protection solutions and services of the construction projects in order to create a safe working site. We work in a way that we ourselves have developed - Quality assured edge protection! INSTALLATION Let an expert carry out the installation. The basis of our service is our customers requirement of safe construction sites, and to follow the workenvironment laws that apply. With an expert carrying out the installation of edge protection the time it takes to do the installation is shortened and made more effective. Certain solutions such as installation of Working platforms require specially trained personnel. SAFETYCHECK In order to assure the highest degree of safety at the building sites we offer periodical safety checks of installed edge protections, something we call SafetyCheck. Suggestions of measures to be taken when something is not satisfactory are documented. This SafetyCheck is carried out by using checklists in our mobile application and is distributed to all parties concerned. ACTIVE SAFETYCHECK We can service an already installed edge protection based on a SafetyCheck that has been carried out at an earlier stage. We make the necessary corrections of possible defects, make additions to the edge protections, optimise material of delivered and installed edge protection, move and remove materials on slabs, etc. We look forward and solve future edge protection situations. RETURN SERVICE Here you can save time by using our return service right on the working site. When it is time to return the delivered edge protection, we will come to the working site and collect the material for you, prepare and manage the return logistics. This service results in maximum return and a minimum of handling.

7 SERVICES 7 With service from SafetyRespect a cost-effective and safe construction site is created

8 8 QUALITY-ASSURED QUALITY-ASSURED EDGE PROTECTION OUR WAY OF CREATING SAFE WORKING SITES EDGE PROTECTION ANALYSIS A working method has been developed with which we already at the designing stage are present to develop solutions according to an established structure an Edge Protection Analysis. We identify situations where a risk of falling may be present, and solutions are then specified already at the design stage. We co-operate with the project management, designers and local managers to create safe working sites. 2 TRAINING At the start of new projects we carry out training of installers and safety representatives in regard to laws and regulations, and the current edge protection solutions. The installers also get instructions as to individual checks with checklists and work methods. The training and instructions are adapted to the requirements of the projects and are carried out, where possible, at the working site. USAGE We also train the users in how to use the protections installed by the installers. Many different professional groups handle the edge protection on a daily basis, and therefore good knowledge is essential. Follow-up tasks are continuously carried out, including measures in order to assure the highest possible degree of safety at the working site. This SafetyCheck is a safety inspection that focuses on the installed edge protections. SAFE WORKING SITE What we create together with our customer is a safe working site with a clear structure, analysis, solutions and documentation. With the correct attitude from the management and personnel in all sectors and available competence, together we create safe, and for all parties, profitable construction sites.

9 RESPONSIBILITY AND LAWS 9 WORKING ENVIRONMENT AND RESPONSIBILITY The most important rules for the working environment are stipulated in the working environment act. The basic principle is that the employer and the worker should cooperate in order to create a good working environment. As an employee, manager or employer each and everyone is affected and responsible for how the working environment act is applied at a working site, and it is then important that everyone knows who is responsible for what. The employer bears the main responsibility for the working environment, and should carry out the measures required to prevent accident and illness. The employer bears the main responsibility for the working environment, and should carry out the measures required to prevent accident and illness. The work manager is the representative of the employer and has a great safety responsibility. The range of this responsibility depends on the representative s powers, competence and independence. The worker has the obligation of following the stipulated regulations and should use available protective equipment. The worker has the right to discontinue the work if it entails sudden or serious danger. LAWS AND NORMS In the working environment act there are rules as to the obligations of the employer and other personnel responsible for safety in regard to preventing illness and accidents at the working site. In this law it is established that the employer should provide a complete edge protection program at the working site for everyone doing work at a height where a risk of falls is present. This means that we have to identify the risks of falling at the working site, select products that are suitable to the task, and provide training of the personnel in correct operation methods. When the employer has carried out the above, the worker is obliged to use the equipment provided, as there is a risk of falling in connection with carrying out certain duties. Laws and norms differs between countries. The Swedish Work Environment Authority publishes regulations that in detail mentions the requirements and responsibilities that apply to the working environment. For building and construction work regulation AFS applies, and this regulation describes when edge protections should be used and generally how they should be designed. In the European standard EN technical requirements and testing methods are given as to temporary guardrail systems when building or maintaining buildings. In this standard you will find detailed requirements on how the edge protection should be designed and the loads they are intended for. CAUSES OF FALL ACCIDENTS The building industry is at the top in the statistics of reported accidents and serious incidents, and is responsible for a great number of fatalities. Fall accidents mean heavy consequences for those who are injured, and roughly 50 per cent of the industry s fatalities are caused by falls. Investigations of such accidents show that the internal risk- or safety management has been poor in many sectors at the companies where accidents have occurred. Substandard knowledge and experience, unclear responsibility distribution at the building site, poor compliance to internal rules and instructions are some factors that have contributed to the accidents. The causes thus lie with the organisations, employers and workers. A correct attitude, higher competence and smarter products are important factors that drive the development forward. A correct attitude, higher competence and smarter products are important factors that drive the development forward. If these are combined with a structured working method such as Quality Assured Edge Protection, a great part of the fall accidents can be avoided.

10 10 EDGE PROTECTION SOLUTIONS

11 EDGE PROTECTION SOLUTIONS 11 EDGE PROTECTION SOLUTIONS We are constantly developing new products, services and solutions in order to meet the requirements of creating safe working sites. On the following pages you will find edge protection solutions that are adapted to different building methods and applying laws and norms. Our focus as experts is to be as close as possible to our customers and projects throughout the whole construction process, from edge protection analysis and estimates to training, delivery, installation and follow-up.

12 12 SLAB EDGES Socket base Vertical bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L SLAB EDGES Slab edges are present everywhere and are a usual cause of fall accidents. Edge protection can be installed on the slab or on the outside of the slab edge. If there are columns, they can be an alternative attachment of the edge protection. Please see solutions for columns/beams. Our solution can be installed on all types of material and they are very fast and flexible as, for example, when walls are to be installed. When the Barrier is in its lowest position it seals against the slab, and it can easily be raised on the post for various kinds of work at the slab edge. Please see also our solutions for prefabricated materials.

13 SLAB EDGES 13 PREFABRICATED CONCRETE SLABS When prefabricated concrete slabs are used in building constructions Socket base is usually installed at the slab edge for attachment of edge protection. In the Socket base Post 1,3 m is installed and thereafter Barrier 2,6 L. The Barrier can be raised in one simple operation on the post up to a height of 310 mm above the floor structure, without decreased safety. This creates conditions for joint grouting, casting and other common work tasks without any need of uninstalling the edge protection. Socket base Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L Cast protection for Socket base INSTALLATION OF FLOOR STRUCTURE When installing prefabricated concrete slabs a movable edge protection is required for safe blockage for other construction personnel. For this the Ground Support Plate is used together with Socket base, Post 1,3 m and Barrier 2,6 L. The Barriers then work as effective and safe blockage while the installation of prefabricated concrete slabs is carried out by workers with personal protection equipment. Ground support plate Socket base Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L Personal Protection Equipment

14 14 BALCONIES BALCONIES A number of work task are carried out on balconies, and therefore edge protections should be used. A quick installation with the highest possible safety and easy handling of the edge protection facilitates the work task. Delivery of material and connection to building hoists and stair towers are facilitated with this system which is compatible with most scaffolding brands. Vertical bracket Balcony bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L BALCONY BRACKET In order to create a safer construction site the edge protection can be mounted before mounting the pre-manufactured balconies. The ordinary attachment for the balcony railing is used for attaching the Vertical bracket or the Balcony bracket. After this, Post 1,3 m is installed together with Barrier 2,6 L or Barrier 1,3 L or Barrier 1,95 L in order to adapt the edge protection according to the measurements of the balcony. Clamp 300 Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L CLAMPS ON BALCONY EDGES Clamp 300 can be installed on balcony edges as brackets for the edge protection. This clamp is good for a balcony thickness of 300 mm and has an integrated bracket for Post 1,3 m. Depending on the measurements of the balcony, Barrier 2,6 L, Barrier 1,3 L or Barrier 1,95 L is then installed on the post.

15 WALL OPNENINGS 15 WALL OPENINGS LINK BARS AT WALL OPENINGS The wall openings should be secured with edge protections. Wall brackets on each side of the opening together with Adjustable link bars should be used. The Adjustable link bars are available in three different sizes for openings from 0,5 metres up to 2,5 metres. This solution makes it easy to remove and put back the edge protection when various types of work is to be carried out, and it also leaves space for different types of lead-throughs. Wall bracket Adjustable link bar 1,5 2,5 m Adjustable link bar 0,9 1,5 m Adjustable link bar 0,58 0,78 m BARRIERS AT WALL OPENINGS Using Wall brackets and Barriers can quickly and easily secure wall openings. Using this attachment there is no need for posts and attachment in the slab. The solution makes it simple and fast to open and close the edge protection. Casting is facilitated and one advantage is that repair of edge protection attachments are not required. This solution creates a tighter edge protection in comparison to using Adjustable link bars. It is quick and easy to install and uninstall when various kinds of work task are to be carried out. Wall bracket Barrier 1,3 L, 1,95 L, 2,6 L Barrier Bracket 360

16 16 SHAFT- AND FLOOR OPENINGS SHAFT- AND FLOOR OPENINGS Openings in walls, slabs and shafts are places that are sometimes changed and must be secured against falls. In lift shafts where platform are desired Plateau consoles fastened on the inside of the shaft wall are recommended. Other openings should be considered as an open slab edge and be provided with a suitable attachment such as Socket base, Vertical bracket, etc., and Post and Barrier. At smaller openings Barrier bracket 360 may be used to minimise considerably the number of attachments and the need of posts (see picture above). Socket base Post 1,3 m Barrier bracket 360 Barrier 1,3 L, 1,95 L, 2,6 L FLOOR OPENINGS Floor openings should be considered as an open slab edge and be provided with a suitable attachment such as Socket base, Vertical bracket, etc., and Post and Barrier. Barrier bracket 360 should be mounted in the corners as an attachment for Barriers in all directions. Plateau consoles Console tap PLATFORM LEVEL/WORKING DECKS When you want to create a platform/working deck in a lift shaft you should use Plateau consoles that are fastened to the inside of the shaft wall. When the plateau consoles have been installed, grade timber of correct dimensions should be used to create the platform level.

17 SHAFT- AND FLOOR OPENINGS 17 SHAFT OPENINGS Before the lift is installed in the lift shaft the opening should be protected against falls from the respective floors. It is also important to protect the lift installer and other professionals working in the shaft against falling objects. Lift openings can quickly and easily be secured by using a Wall bracket installed on each side of with Barriers. The lock function of the wall bracket works so that the solution works as a lift gate as well. With this attachment there is no need for posts and customary attachment on the slab. This gives great advantage as repair of edge protection attachments is not required on the slab. Wall bracket Barrier bracket 360 Barrier 1,3 L, 1,95 L, 2,6 L BUILDING HOISTS AND STAIR TOWERS It is important to create access to slabs at the working site in connections between building hoists and/stair towers. SafetyRespect s products are compatible with most common scaffold brands and stair towers. Please contact us for more detailed information as to our edge protection solutions. Barrier bracket wedge coupler Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L Adjustable link bar Double coupler swivelling

18 18 STAIRS STAIRS A safe edge protection should be immediately created in stairs that are being used, or the stairs should be blocked. As stairs are constantly used in the construction project it is important to use an edge protection system that is safe and can be easily handled. Attachments for posts can be installed before installing prefabricated stairs. Clamp 550 Post 1,3 m Adjustable link bar Barrier bracket 360 INSTALLATION WITHOUT MAKING ANY HOLES With SafetyRespect s edge protection solutions the design of the stairs does not matter. There is always a safe, fast and effective solution. By using Clamp 550 the process of making holes is eliminated when installing edge protections. The clamp can be swivelled and turned around and be installed in one simple operation without damaging the sensitive surface. The clamp has an integrated bracket for Post 1,3 m and Adjustable link bars are installed on the posts.

19 STAIRS 19 ATTACHMENT WITH SOCKET BASE The Socket base can be used as attachment of edge protection in stairs. The Socket base has an integrated bracket for Post 1,3 m. Adjustable link bars are installed on the posts. Socket base (with current anchorage) Post 1,3 m Adjustable link bar Barrier bracket 360 ATTACHMENT TO THE STRING As an attachment point for the bracket the regular cast in sockets in stairs can be used. A Stair bracket with spacers makes it possible to let the protection in the stairs during the whole construction period. All kinds of work can be carried out with the Adjustable Link Bars in place, even the final painting work. Stair bracket Post 1,3 m Adjustable link bar Barrier bracket 360

20 20 BEAMS AND COLUMNS BEAMS AND COLUMNS When beams and columns are used in building constructions they can be used with great advantage for attaching the edge protection. Creation of open slabs and surfaces in the building process without attachments for the edge protection will facilitate casting and other work tasks. Attachment Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L STEEL BEAMS Pre-installed attachments in the framework onto steel beam considerably facilitate the attachment of the edge protection as the attachment already is in place. The remaining mounting of Posts and Barriers can be done either before lifting the beam or on the slab after attaching the beam. This saves time when doing the attachment, results in a safer working site as the attachment at the slab edge is minimised. It also means that the edge protection will not be a hindrance as other work tasks are to be carried out on the slab. Welding socket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L WELDING SOCKET When steel beams are used in the building construction a Welding socket with integrated post lock should be designed as an attachment of edge protection. In these cases the Welding socket is welded according to the instructions when producing the steel beams. When the beam has been lifted in place Post 1,3 m and Barrier 2,6 L are mounted. The attachment of the edge protection will become both safer and faster with a pre-fabricated attachment such as this one.

21 BEAMS AND COLUMNS 21 STEEL BEAM CLAMP Using steel beam as attachment creates a free surface on the slab and can be used for other work tasks. The edge protection will then be positioned outside the working space. On steel beams with a flange a Steel beam clamp can be mounted in order to quickly create an attachment for the edge protection. The clamp is designed so that is has jaws that grip the steel beam profile. The steel beam clamp has an integrated attachment for Post 1,3 m. Barrier 2,6 L is installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks. Steel beam clamp Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L THREADED RODS Threaded rods can be welded onto the outside of steel beams in order to create an attachment for different types of edge protection brackets. After doing so a Facade bracket, for example, can be installed together with Post 1,3 m and Barrier 2,6 L. This solution creates a free work surface right out to the slab edge. The facade bracket can also be adjusted in order to increase the distance between the steel beam and the Barrier, for example when installing walls and windows, etc. Welding of pin bolts/threaded rods can be done when producing the steel beams or directly at the working site. Threaded rods Facade bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L

22 22 BEAMS AND COLUMNS Facade bracket Wood screw Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L WOODEN BEAMS In building constructions with wooden beams the edge protection can be mounted with various systems and solutions, for example with Flex Facade brackets. The facade bracket is directly mounted on a wooden beam with the required wood screws. When a roof protection is required, a Hall System can be installed in the wood structure. The attachment is then done by using rods. Barrier Alu 3 m Joint pin Pipe coupling Attachment LONG SPANS With designed and pre-installed attachments on columns the installation of the edge protection will be facilitated. To use the available columns and attachments creates a free surface of the slab and can be used for other work tasks. The edge protection will be suspended on the columns above the working surface at a correct height, considering future work to be carried out. If the design of the attachment is not done in advance, there are other attachments available. In such a case, please contact us. SafetyRespect s Barrier Alu 3 m can handle large spans and makes possible installation between columns. The Barriers are continuously jointed with Pipe joints or Pipe couplings without using any attachment on the slab. The Barriers can be raised so that they create a completely free working space required when applying a new surface layer, casting, etc.

23 BEAMS AND COLUMNS 23 STEEL STRUCTURES For steel structures we can provide adapted edge protection solutions with various attachments. Making of holes and threading, or mounting of Threaded welding plates, can be carried out when manufacturing the steel beams. If Flex Facade brackets are used the distance of the edge protection to the slab edge can be adjusted. Threaded welding plate Recommended attachment Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L

24 24 PREFABRICATED MATERIAL When you feel safe at the working site it is easier to focus on the job that is to done. It increases the work efficiency and gives better overall economy.

25 PREFABRICATED MATERIAL 25 EDGE PROTECTION FOR PREFABRICATED MATERIAL Edge protection solutions that are worked in consultation with both the product management and designers create the best conditions as to economy, time and safety. Already at the designing stage we investigate things such as attachments for the edge protection in order to find solutions to the work tasks that are to be carried out by the different professional groups of people or subcontractors. PRE-INSTALLATION ON PREFABRICATED ELEMENTS In order to create a safe working site and save time the edge protection can be installed on prefabricated elements before they are lifted in place. For example, attachments, Post 1,3 m and Barrier 2,6 L can be installed already on the lorry on which the prefabricated elements are transported or on the ground before hoisting them in place. The edge protection will then be in place already when the next working phase is to be started on the building. Installation is fast and safe, and creates better economy as saved time is achieved through more efficient use of building cranes. Socket base Vertical bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L

26 26 PREFABRICATED MATERIAL Precast holder Protection sleeve for Precast holder Precast bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L Adjustable link bar LATTICE GIRDER ELEMENT Precast holder that are already cast in a prefabricated lattice girder elements at the concrete factory offers fast and safe mounting of edge protection. The Precast holder has an integrated post lock and is casted into the elements at the factory. Protection sleeve is mounted at the desired height at the working site, and is adapted to the casting height/slabs thickness. Post 1,3 m and Barrier 2,6 L are installed either before or after that the prefabricated element is lifted in place. The Barriers can easily be lifted to the desired height when casting. No tools are needed. The products are tested in accordance with EN13374 and meet the dimensioning requirements according to the Euro Code. In constructions with prefabricated slab decks even the Precast edge holder can be installed onto the formworks edge after that the attachment has been pre-designed. A dialogue takes place between the manufacturer of the prefabricated material and SafetyRespect s technical division as to the edge protection solution and positioning of Precast holders, etc.

27 PREFABRICATED MATERIAL 27 WALL ELEMENT WITH CAST IN SOCKET Cast in socket M16 is an attachment that is designed in a wall element that makes possible fast and safe installation of the edge protection at the working site. A dialogue takes place between the manufacturer of the prefabricated material and SafetyRespect s technical division as to recommendations of edge protection solutions, positioning of cast in sockets, pull out loads, laws and regulations. Cast in socket M16 Recommended bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L WALL ELEMENT WITH PRECAST SOCKET WALL The Precast Socket Wall is an attachment that is designed and cast into the wall element at the factory. This solution creates fast mounting and offers a free working space. Precast socket wall Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L

28 28 CONCRETE CASTING Socket base Post 1,3 m Cast protection for Socket base Barrier 1,3 L, 1,95 L, 2,6 L CONCRETE CASTING CONCRETE HOLLOW CORE PRECAST SLABS When casting on top of concrete slab structures where Socket base, Post and Barrier are used on the slab it is an advantage to use casting protection. The Barrier can be raised on the post in several steps up to 310 mm with maintained safety as the post locking is fully functional. The Cast protection protects the Socket base against concrete scrap from the casting process. Attachment (adapted to the situation) Barrier Alu 3 m Joint pin Pipe coupling ATTACHMENT TO COLUMNS FOR FREE WORKING SPACE If columns are available to use as attachment for the edge protection these can be a good alternative. Attachment of edge protection on columns allows the working space/ slabs to be totally free from edge protection attachments. The challenge here is the distance between the columns. As a solution we recommend Barrier Alu 3 m to be jointed continuously with pipe joints and pipe couplings. This type of mounting makes possible great distances between the columns. Attachment to the columns creates a free working space in order to apply a new topping in the form of, for example, casting, etc.

29 CASTING IN SITE 29 CASTING IN SITE With a structure framework cast-in-site there is the possibility of designing attachment points for the edge protection. Socket w rebar with integrated post lock, for example, can be cast into the wall tops in, for instance, house gables, lift- and stair shafts. After this Post 1,3 m and Barriers are installed. In order to be able to build external panel walls from inside the slab Balcony bracket 10 Degrees can be installed as an attachment, which gives an inclination of the edge protection by approximately 10 degrees. Socket w rebar Balcony bracket 10 degrees Vertical bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L Vertical brackets can be installed on the formwork as attachments, and after that Post 1,3 m and Barrier. For other requirements of edge protection such as stairs, window openings, etc., there are several solutions that can be designed and cast in order to facilitate installation of edge protection and to create safer working sites. The vertical bracket can be installed on the formworks as an attachment, followed by Post 1,3 m and Barrier. At the wall tops Socket W Rebar, with integrated post lock can be cast as attachments for edge protection.

30 30 BLOCKING Ground support plate Socket base Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L Strap 0,6 BLOCKING To create safe access routes and temporary blocking is an important work environment task. The Ground support plate can be used in combination with SafetyRespect s edge protection products in order to create blockings, safe access routes, etc. Socket base, Post 1,3 m and Barrier 2,6 L or Adjustable link bars are installed on the ground support plate. This solution can be quickly installed and is easy to move and adjust when required.

31 SCAFFOLDINGS 31 EDGE PROTECTION FOR SCAFFOLDS SafetyRespect s edge protection system is compatible with most scaffold brands. Our products and solutions with Couplings, Barriers and Posts can be combined with scaffolds in order to achieve safety on platform levels, slabs, access points and roofs. As to technical matters, please contact SafetyRespect. Barrier bracket wedge coupler Barrier 1,3 L, 1,95 L, 2,6 L Strap 0,6 m

32 32 ROOFS AND FACADES ROOFS AND FACADES The choice of edge protection is dependant on both laws and regulations that apply to the current project and the type of work that is to be carried out. We have edge protection solutions for all types of roof construction. One example is SafetyRespect s Flex System that has been developed for installation in a great variety of situations. Flex Facade bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L FACADES In order to create a free working space on facades Flex Facade brackets can be used as attachments of edge protections. The attachment itself is designed in order to facilitate installation of edge protections. The distance between the facade and edge protection can easily be adjusted during ongoing work.

33 ROOFS AND FACADES 33 EAVES AND GABLES At the eaves Flex Eaves Brackets can be installed as an attachment for edge protection. The attachment makes possible a free working space and the distance between the facade and edge protection can be adjusted during ongoing work. The bracket is installed with through bolt in the roof frame and supports even against the facade or the roof frame. At the gables the Flex Gable Bracket can be installed as an attachment, which also creates a free working area. The distance between the facade and the edge protection can be adjusted during ongoing work. The attachment can be done in the roof base. Flex Eave bracket Flex Eave bracket with counterhold Flex Gable bracket Flex Working platform Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L ROOF BASE AND TIN PLATED ROOF On roof base and cover with double seam the Standing seam bracket can be used as attachment for the edge protection. The bracket can be adjusted to four positions for roof inclinations from 5 to 40 degrees. The standing seam bracket is installed so that the seam lock gets a grip under the seam. The sheets must be of good quality and be fastened against the roof construction. The standing seam bracket Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L On roof bases the sheet seam bracket is installed above the roof frame with wood screws.

34 34 ROOFS AND FACADES Flex Working platform Post 1,3 m Barrier 1,3 L, 1,95 L, 2,6 L WORKING PLATFORM AT FACADES AND ROOFS When working on facades and roofs Flex Working platform can be installed in order to create a safe working area. The system is both faster to install and more flexible than traditional scaffolds. The system can be adapted to most situations. Installation is mainly done by SafetyRespect in consultation with the customer. The Working platform has a type approval certificate as a scaffold of SP (Technical Research Institute of Sweden) in load grade 2 and 3 according to AFS 1990:12.

35 ROOFS AND FACADES 35

36 36 HALL CONSTRUCTIONS Barrier Alu 3 m Post 2,0 Alu (straight mounting) Post 2,5 Alu (straight mounting) Swing Bracket + Post 1,3 (protruding roof) Weld nut (steel attachment) Casting material (concrete att.) Rod 20 complete 0,5 m, 1,0 m Joint pin Barrier bracket wedge coupler Double coupler Swivelling Coupler with bracket HALL CONSTRUCTIONS SafetyRespect Hall system is an edge protection developed for flat roofs and gently inclined roofs. Such an example is constructions for industry, sports and commerce. The system has several attachment alternatives and can handle long spans between the attachment points. The system consists of Barrier of aluminium and smart components that offer rapid and safe installation. Hall constructions that are built have a relatively short construction process. That is why it is important that the edge protection that is selected can be quickly installed, be premanufactured, is adjustable and offers fully acceptable protection during work on the roof during the building process. The system takes into consideration the different types of work that are to be carried out as well as the fact that the respective professional category of people working on the building should have good edge protection. The system creates a safe working site when installing load-carrying sheets, roof insulation, waterproof layer, etc. Wall panels and facade elements can be installed with the edge protection in place. The flexibility both in height and sideways, offers solutions that traditional edge protection does not have. The edge protection can be adjusted/ swivelled, which makes possible installation of gutters and similar devises at the eaves. The Barriers of aluminium are attached to posts with the post locking and are jointed continuously with pipe joints or couplings. The edge protection is attached on the outside of the columns. Welding nuts are delivered to the manufacturer of the framework and welded onto the steel columns. The positioning of welding nut is designed in consultation with SafetyRespect. When the edge protection is installed on the columns the working area is totally free to be used for all other work, such as placing the load-carrying sheets, roof insulation, waterproof layer, etc. No damage is thus done to already finished surfaces. The welding nuts are covered by the sheets, pilaster and between the facade panels when they are out in place.

37 HALL CONSTRUCTIONS 37 >100 ATTACHMENTS ALT. ALT. The Hall system offers several attachment alternatives that can be used for steel, concrete and glued laminated timber. The attachment is carried out either in the middle of or on the side of the beam, between two columns placed close to each other, direct in wooden beams or with casting sleeves. The brackets can be fastened either with bolts if they are to be removed at a later date, or be welded in place as permanent brackets to be used for future maintenance of roofs and facades. CONCRETE AND STEEL COLUMNS ALT. ALT. ALT. WOODEN COLUMNS

38 38 HALL CONSTRUCTIONS Barrier Alu 3 m Swing Bracket + Post 1,3 m Weld nut (steel attachment) Casting material (concrete att.) Rod 20 complete 0,5 m, 1,0 m Joint pin Barrier bracket wedge coupler Double coupler Swivelling Coupler with bracket HALL SYSTEM WITH SWING BRACKETS When there is a protruding roof, outside roof drainage or similar, an adjustable bracket may be the best solution. We have several possibilities with different solutions to either adjust the Barriers or swivel past a protruding roof. Barrier Alu 3 m Post 1,3 m Swing Bracket Rod 20 complete 0,5 m, 1,0 m Attachment

39 HALL CONSTRUCTIONS 39 HALL SYSTEM WITH STRAIGHT INSTALLATION Barrier Alu 3 m Coupler with bracket Post 2,5 m Alu Rod 20 complete 0,5 m, 1,0 m A quite common building method of hall constructions is that the wall elements are placed past the roof and create a border, something that requires indoor drainage. As to the edge protection a solution using a straight post installed to the attachment may be the best alternative. We can offer several different post options to handle large spans. Barrier Alu 3 m Post 2,0 Alu Post 2,5 Alu Weld nut (steel attachment) Casting material (concrete att.) Rod 20 complete 0,5 m, 1,0 m Joint pin Barrier bracket wedge coupler Double coupler Swivelling Coupler with bracket

40 40 FALLING OBJECTS PROTECTION AGAINST FALLING OBJECTS SafetyRespect Safety fan system is a complement to SafetyRespect s ordinary edge protection system and is used to catch falling materials and objects that may constitute a risk for injuries to people and damage to objects. The system can be installed without any need of cranes and designed to be installed on floor structures, scaffolds and walls. More information is available in our user s manual. Protects people, facades and the immediate area of the building site. Catches and retains falling objects. Protects the public in, for example, in city environments. Can be installed in all existing situations at a construction site, on floor structures, scaffolds and walls. Can be directly installed from the work area without using any cranes. Can easily be moved and adapted throughout the construction project. Easy to fold to a vertical position in order not to interfere with cranes.

41 FALLING OBJECTS 41 SAFETY FAN FOR SLABS SafetyRespect Safety fan system for slabs is a compliment to our edge protection system and is used to catch falling materials and objects (not people) that may constitute a risk for injuries to people and damage to objects. This system can be installed without any need of cranes and designed to be installed on floor structures, with the possibility of directly integrating SafetyRespect s edge protection system. Top bracket Bottom support Alu beam 1500 Alu pipe 6 m Net Safety fan 3 x 6 m Double coupler swivelling Coupler Alu pipe 4 m Plate 140x140

42 42 FALLING OBJECTS Alu beam 1500 Net Safety fan 3 x 6 m Plate 140x140 Alu pipe 6 m Alu pipe 4 m Coupler bracket Keyhole bracket SAFETY FAN FOR WALLS SafetyRespect Safety fan system for walls is a compliment to our edge protection system and is used to catch falling materials and objects (not people) that may constitute a risk for injuries to people and damage to objects. This system is adapted to be installed on a vertical surface without any need of cranes and with the edge protection mounted freestanding on the working area.

43 FALLING OBJECTS 43 SAFETY FAN ON SCAFFOLDING SafetyRespect Safety fan system for scaffolding is a compliment to our edge protection system and is used to catch falling materials and objects (not people) that may constitute a risk for injuries to people and damage to objects. This system is adapted to be installed on most existing scaffold brands without any need of cranes and with the possibility of integrating SafetyRespect s edge protection system. Pay attention to the increasing loads on the scaffolding. Net Safety fan 3 x 6 m Alu pipe 6 m Double coupler Double coupler Swivelling

44 44 FALLING OBJECTS Fall protection net 3 x 6 m Fall protection net 8 x 10 m Fall protection net 8 x 12 m Fall protection net 10 x 12 m Grippa 22 mm Grippa 50 mm FALL PROTECTION NET FOR CATCHING FALLING PERSONNEL The Fall protection net is available in a variety of sizes and designs and is used to catch both people and materials that may fall. The attachment is done with a rope or with a so-called Grippa in, for example, a roof girder construction. The fall protection net offers both flexibility and safety, which results in increased efficiency when working at great heights. When positioned correctly the protection net is also used to catch falling objects such as waste material, tools, building parts, equipment, etc. The protection net also reduces the feeling of great height, which means that possible fear of heights of the workers is reduced. This creates a feeling of safety with increased efficiency as a result.

45 ATTACHMENTS 45 ATTACHMENTS CONCRETE SCREW 10 x 95 mm with flange, ART. NO x 75 mm with flange, ART. NO x 100 mm with flange, ART. NO DOUBLE-THREADED M16 M16 ART. NO IMPACT ANCHOR M16 ART. NO Drill diameter 20 mm. Drilling depth 75 mm. WOOD SCREW WFD WFD 12 x 100 mm, ART. NO WFD 12 x 120 mm, ART. NO Available in several lengths. No pre-drilling required. Key width 17 mm. Torx T40.

46 46 TRANSPORTATION Box stillage Post stillage Barrier stillage 2,6 L Barrier stillage vertical TRANSPORTATION AND WAREHOUSING It is important that the logistics at a working site function and that the edge protection is easily accessible when required. Our products are delivered in stacking stillages that minimise the area needed. The stillages can be lifted either by forklift or crane. Lifting instructions are available.

47 WAREHOUSING 47 POST STILLAGE ART. NO , Maximum load 800 kg. Dimensions L 900 mm, W 780 mm, H 650 mm. BARRIER STILLAGE 2,6 L ART. NO , Maximum load 800 kg. Dimensions L 2700 mm, W 1245 mm, H 840 mm. BOX STILLAGE ART. NO , Maximum load 800 kg. Dimensions L 900 mm, W 780 mm, H 650 mm. BARRIER STILLAGE VERTICAL ART. NO , Maximum load 800 kg. Dimensions L 900 mm, W 780 mm, H 1538 mm.

48 48 PRODUCT OVERVIEW STANDARD SYSTEM SOCKET BASE ART. NO Integrated post lock. Several bolt alternatives. Hot dip galvanized. Installed with c/c up to 2,4 m. Weight 1,0 kg 150 pieces delivered in stacking box stillage. POST 1,3 M ART. NO Double integrated barrier locks. Integrated post lock. Hot dip galvanized. Weight 3,6 kg. Installed with c/c up to 2,4 m. 100 pieces delivered in stacking stillage. BARRIER 1,3 L ART. NO Can be easily raised and lowered on the posts. Zinc plated and powder coated. Stable frame construction. Integrated toe board 260 mm. Weight 10,8 kg. 70 pieces delivered in stacking stillage. POST 2,0 M ALU ART. NO Aluminium pipe 48,3 x 4,0 mm. Integrated post lock. Weight 3,2 kg. 100 pieces delivered in stacking stillage. BARRIER 1,95 L ART. NO Can be easily raised and lowered on the posts. Zinced and powder coated. Stable frame construction. Integrated toe board 260 mm. Weight 15,1 kg. 46 pieces delivered in stacking stillage. BARRIER 2,6 L ART. NO Can be easily raised and lowered on the posts. Zinced and powder coated. Stable frame construction. Integrated toe board 260 mm. Weight 19,7 kg. 35 pieces delivered in stacking stillage. ADJUSTABLE LINK BARS 1,5-2,5 M. ART. NO ,79-1,5 M. ART. NO ,53-0,78 M. ART. NO For stairs, shafts and openings. Easily adjustable. Swivel brackets. Hot dip galvanized. Delivered in stacking stillage. Weight 3,0 kg, 4,9 kg, 8,0 kg. CLAMP 300 ART. NO Width span mm. Vertical or horizontal installation. Delivered with movable post holder. Several installation alternatives. Hot dip galvanized. Weight 5,4 kg. 50 pieces delivered in stacking stillage. CLAMP 550 ART. NO Width span mm. Several installation alternatives. Swivelling 360 degr. and reversible. Handles all stair angles. Hot dip galvanized. Weight 7,8 kg. STEEL BEAM CLAMP ART. NO Grips all types of steel beams and posts with flanges up to 300 mm. Integrated post bracket. Robust and durable thread. Hot dip galvanized. Weight 6,3 kg.

49 PRODUCT OVERVIEW 49 STANDARD SYSTEM BEAM BRACKET ALU PRIMARY ART. NO SECONDARY ART. NO Used on aluminium beams in form systems at slabs cast in site. Integrated post lock. Hot -galvanised. Quick screw lock. Delivered in stacking stillage. Weight 3,0 kg, 2,3 kg. BEAM BRACKET WOOD PRIMARY ART. NO SECONDARY ART. NO Used on wooden beams in form systems at vaults cast in site. Integrated post lock. Hot -galvanised. Quick screw lock. Weight 4,0 kg, 2,3 kg. CONSOLE BRACKET ART. NO Attachment on slab edge and creates free working space. Several installation alternatives. Adjustable or stationary position. Installed with Socket base. Installed with c/c up to 2,4 m. Hot-galvanised. Weight 1,4 kg. PLATFORM CONSOLE CONSOLE BRACKET ART. NO CONSOLE TENON ART. NO Bracket that creates flats at openings and shafts. Installed with console tenon. Maximum load 1,000 kg/console. Weight 1,4 kg. VERTICAL BRACKET ART. NO Fits common balcony attachments. M10 c/c 100 mm. Two installation methods. Installed with cc up to 2,4 m. Hot dip galvanized. Weight 1,4 kg. BALCONY BRACKET ART. NO Fits all common balcony attachments. M10 c/c mm. Installed with cc up to 2,4 m. Hot dip galvanized. Weight 1,3 kg. BALCONY BRACKET 10 GR ART. NO Inclined bracket that facilitates installation of external panel wall. STANDING SEAM BRACKET ART. NO Installed on steel sheet, cover. Quick installation. Handles various roof angles. Does not damage the steel sheet. Hot dip galvanized. Weight 2,6 kg. BRACKET FOR ROOF GUTTER ART. NO Installed together with a scantling in the roof gutter. Integrated post lock. Hot dip galvanized. Weight 6,8 kg. WALL BRACKET ART. NR Used for installing Barriers or Adjustable link bars, for example, window openings with low parapet, lift openings, etc. Hot dip galvanized. Weight 0,7 kg. BARRIER BRACKET 360 ART. NO Used in corners to eliminate double attachments or posts. Makes possible Barriers despite radius. Dimensions, approx. 113 x 85 mm. Zinced. Weight 0,4 kg.

50 50 PRODUCT OVERVIEW STANDARD SYSTEM PRECAST SOCKET ART. NO PROTECTIVE SLEEVE FOR SOCKET ART. NO Precast socket with integrated post lock for casting in prefabricated constructions. To be positioned on the bottom reinforcement. WELDING SOCKET 150 ART. NO For welding on steel structures. Available with and without bottom. Integrated post lock. Untreated. Standard height 150 mm. PRECAST BRACKET ART. NO Installed on the form work Installed on a vertical surface and gives a free working space. Quick installation with keyhole. Integrated post lock. Hot dip galvanized. Weight 1,5 kg. 200 pieces delivered in stillage. PRECAST EDGE HOLDER 120 MM ART. NO Installed on the inside of the form work on prefabricated flat floor structures. M12 c/c 120 mm. PRECAST SOCKET WALL 100 PRECAST SOCKET WALL 150 ART. NO For casting in prefabricated concrete walls; creates attachments for the edge protection in the outer slab edge. Length 450 mm. Integrated post lock. Delivered with plastic cover. Weight 1,8 kg. SOCKET W REBAR 400 MM ART. NO For building structures cast in place. Integrated post lock. Length of reinforcement 400 mm. Delivered with plastic lid. BARRIER BRACKET WEDGE COUPLER SINGLE, ART. NO DOUBLE, ART. NO Used on posts or scaffold pipes (48,3 mm) for attachment of Barriers or Adjustable link bars. Integrated Barrier lock. Zinced. Weight 1,1 kg, 1,7 kg. The development is driven forward by technical support to our customers and innovation of new edge protection products and systems.

51 PRODUCT OVERVIEW 51 FLEX SYSTEM FLEX ROOF GABLE BRACKET ART. NO Adjustable bracket. Configured according to requirement. Robust and durable. Galvanised components. Weight from 5,1 kg. FLEX FACADE BRACKET ART. NO Adjustable mm from the facade. Keyhole bracket. Installed with c/c up to 2,4 m. Hot dip galvanized. Weight 6,8 kg. FLEX EAVE BRACKET ART. NO Adjustable bracket. Configured according to requirement. Robust and durable. Galvanised components. Weight from 5,1 kg. FLEX EAVE BRACKET WITH COUNTERHOLD ART. NO Adjustable bracket. Configured according to requirement. Robust and durable. Galvanised components. Weight from 5,1 kg. FLEX WORKING PLATFORM ART. NO Flexible installation on wall, floor structure or truss. Used with boardwalk steel sheet. Configured according to requirement. Galvanised components. Load classification 2 and 3. Console weight from 12 kg. FLEX BEAM FLEX BEAM 600. ART. NO FLEX BEAM ART. NO FLEX BEAM ART. NO FLEX POST BRACKET ART. NO Used when installing Flex Systems. FLEX KEY CONSOLE ART. NO Used when installing Flex Systems. FLEX WALK WAY ART. NO FLEX WALK WAY RIGHT (green) ART. NO FLEX WALK WAY LEFT (red) ART. NO FOOTWAY SHEET END PROTECTION ART. NO Used when installing Flex Working platform. FLEX ANGLE PLATE ART. NO Used when installing Flex systems. FLEX ANGLE PLATE CORNER ART. NO Used when installing Flex systems.

52 52 PRODUCT OVERVIEW HALL SYSTEM BARRIER ALU 3 M ART. NO Can easily be raised and lowered on the posts. Stable frame construction of 48,3 mm aluminium pipe. Integrated toe board 225 mm. Weight 17,2 kg. 14 pieces delivered in stacking stillage. SWING BRACKET ART. NO Used for attaching the Hall System to enable adjustment of the position of the edge protection. ROD 20 COMPLETE 0,5 M. ART. NO ,0 M. ART. NO Used when installing Hall system. ROD 20 0,5 m ART. NO ,0 m ART. NO Included in Rod 20 Complete and used as attachment of the Hall System. JOINT PIN ART. NO Used for jointing Barrier Alu 3 m. WELD NUT 20 ART. NO CENTRE PLATE 140X140 ART. NO SIDE PLATE 140X140 ART. NO Used for attachment of Hall System. WING NUT 20 ART. NO Included in Rod 20 Complete used as attachment of the Hall System. COUPLER WITH BRACKET ART. NO Included in Rod 20 Complete as attachment of the Hall System. Fits SafetyRespect s different posts and aluminium pipes, as well as common scaffold brands. SAFETY LOCKING RING ART. NO Used to position the swivel bracket. SOCKET 20 ART. NO Included in Rod 20 Complete as attachment of the Hall System.

53 SKYDDSKÄRM PRODUCT OVERVIEW 53 SAFETY FAN SYSTEM SAFETY FAN SLAB ART. NO Installed on the floor structure with the possibility of directly integrating SafetyRespect s regular edge protection system. SAFETY FAN SCAFFOLDING ART. NO Can be installed on most existing scaffold brands. BJÄLKLAG STÄLLNING FASAD BJÄLKLAG STÄLLNING FASAD SAFETY FAN WALL ART. NO NET SAFETY FAN 3X6 M ART. NO Installed on a vertical surface with regular edge protection freestanding in the working area. FASAD BOTTOM SUPPORT SAFETY FAN ART. NO Used as attachment of Safety fan for floor structures. TOP BRACKET SAFETY FAN ART. NO Used for attaching Safety fans on floor structures. ALU BEAM 1500 ART. NO Used for attaching the Safety fan. FLEX KEYHOLE BRACKET ART. NO Used for attaching Safety fans on floor structures. PLATE 140X140 ART. NO Used as attachment of Safety fan for floor structures. It s easier to focus on the work to be done! This increases the performance and gives better total economy.

54 54 PRODUCT OVERVIEW OTHER DOUBLE COUPLER SWIVELLING (WEDGE) ART. NO Easy to install without tools. Fits SafetyRespect s different posts and aluminium pipes, as well as common scaffold brands. DOUBLE COUPLER STATIONARY (WEDGE) ART. NO Easy to install without tools. Fits SafetyRespect s different posts and aluminium pipes, as well as common scaffold brands. DOUBLE COUPLER SWIVELLING (SCREW) ART. NO Used, among other things, when Barrier Alu 3 m is to be jointed overlapping. Fits SafetyRespect s different posts and aluminium pipes, as well as. common scaffold brands. DOUBLE COUPLER STATIONARY (SCREW) ART. NO Installed on, among other things, post/pipe as attachment for Barrier Alu 3 m or Alu pipes. Fits SafetyRespect s different posts and aluminium pipes, as well as common scaffold brands. COUPLER BRACKET SAFETY FAN ART. NO Used when installing Safety fan on walls. Fits SafetyRespect s different posts and aluminium pipes, as well as common scaffold brands. COUPLER ART. NO One end fits SafetyRespect s different posts and aluminium pipes and most of the common scaffold brands. The other end fits Flex Beam 50 mm and Alu Beam 50 mm. ALU PIPE 6 m. ART. NO m. ART. NO m. ART. NO FALL PROTECTION NET 10 x 12 m. ART. NO x 12 m. ART. NO x 10 m. ART. NO Can be used as a compliment to our edge protection systems. Edge protection from SafetyRespect decreases the number of accidents and lowers the company s costs for work-related injuries.

55 PRODUCT OVERVIEW 55 OTHER GROUND SUPPORT PLATE ART. NO Used with Socket base. Three mounting points M16. Zinced and powder coated. Weight 7,9 kg. 50 pieces delivered in stacking stillage. CAST PROTECTION FOR SOCKET BASE ART. NO Easy to install and uninstall. The Barrier is lifted in one step on the post. Kept in place by the Barrier. Diameter 158 mm, height 92 mm. STRAP 0,6 M. ART. NO ,5 M. ART. NO ,0 M. ART. NO Great range of application. Very strong and durable. Three different lengths. ANGLE BLOCK ART. NO Makes possible traditional installation of Socket base in inclined working areas. The angle is 24 degrees and can manage most roof angles. BOX STILLAGE ART. NO Maximum load 800 kg. Dimensions, Width 780 mm, Length 900 mm, Height 650 mm. POST STILLAGE ART. NO Adapted to Post 1,3 m. Maximum load 800 kg. Dimensions, Width 780 mm, Length 900 mm, Height 650 mm. BARRIER STILLAGE VERTICAL ART. NO Adapted to Barriers. Maximum load 800 kg. Dimensions, Width 780 mm, Length 900 m, Height 1,538 mm. BARRIER STILLAGE 2,6 L ART. NO Adapted to Barrier 2,6 L. Maximum load 800 kg. Dimensions, Width 1,245 mm, Length 2,700 mm, Height 840 mm.