LIGHTPLANE 2 SPECIFICATIONS. QuickShip. LP2 Suspended, Wall, Surface LED. alwusa.com/lp2. Eligible. Find additional images and information at

Transcription

1 QS QuickShip Eligible When ordered with ALL "QS" options LIGHTPLANE 2 LP2 LED Find additional images and information at alwusa.com/lp2

2 1. BASE MODEL LP2SI QS LP2SD QS LP2WI QS LP2WD QS LP2SMB QS 2 suspended indirect 2 suspended direct 2 wall-mount indirect 2 wall-mount direct 2 wall/surface, back-mounted, front-facing Page 2 of 5 Type: 2. RUN LENGTH/ SIZE QS Individual (1, 2, 3, 4, 5', 6, 7 or 8 ) QS Continuous row or Configuration 1 (enter total linear length, ex: 20 ) 1 A configuration is a custom shape (rectangle square, L, etc.) with mitered corners. Must choose quantity of mitered corners in Additional Options. All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required. 3. LAMPING Pair lamping with CCT (where applicable), ex: MED/2700K LOW 2 QS Low-output, high-performance LED 619 delivered lm/ft, 7.1 W/lf, 87 lm/w MED 2 QS Medium-output, high performance LED 844 delivered lm/ft, 10.1 W/lf, 84 lm/w HI 2,3 QS High-output, high-performance LED 1144 delivered lm/ft, 14.4 W/lf, 79 lm/w TUNE 4,8 DECOR 5 RGB 6 RGBW 6 Tunable white LED, 2700K-5700K 651 delivered lumens, 8 W/lf, 81 lm/w Decorative constant voltage LED, 286 delivered lm/ft, 5.9 W/lf, 48 lm/w 3000K 3500K 4000K Color-changing RGB LED, 5 W/lf Color-changing RGB plus White (4000K CCT) LED, 5 W/lf 2 Performance calculations derived directly from IES test results at 3500K 3 HI may be specified for Direct or Indirect lamping, but CANNOT be used in both channels 4 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs. Cooler and warmer CCT settings will yield lower lumens, lower lm/w and higher W/lf. 5 Performance calculations are extrapolated estimates 6 DMX driver recommended; controller not included. QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.

3 4. DRIVER Pair driver with dimming level (where applicable), ex: 0/10V/S Page 3 of 5 0/10V/ QS 0-10V dimming QS S Standard dimming 7 QS 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% ECOSYS1 QS Lutron Hi-lume 1% EcoSystem, constant current or constant voltage ECOSYS5 Lutron 5-Series 5% EcoSystem, constant current 7 For LOW, MED and HI lamping, standard dimming is down to 5%. For DECOR lamping, standard dimming is down to 10%. 5. LENS NONE None. Select only when specifying indirect AND fluorescent lamping EXT/R QS Extra diffuse, reveal EXT/R 6. FINISH AL QS Standard, natural Ultimatte aluminum BK QS Black powdercoat BRS Brass metallic powdercoat SV Silver powdercoat WH QS White powdercoat WH/AM White antimicrobial powdercoat for healthcare environments RAL/ Specify RAL powdercoat code (ex: #RAL/3003) 7. VOLTAGE UNV QS Universal voltage volt 8 Driver options may be limited with 347 voltage. Consult factory. 8. ADDITIONAL OPTIONS NONE QS None COMBO QS Combination 4.5" canopies at feed locations with both power feed and suspension mounting hardware EMC/ 9 QS Emergency circuit (indicate total quantity, ex: EMC/4) EMB/ 9 QS Emergency battery pack (indicate total quantity, ex: EMB/4) ENLGHT/ 10,11,12 QS Embedded, Enlighted 0-10V smart sensor (occupancy, daylight, networking and more) OS/ 11,12 Remoted, 0-10V occupancy sensor (indicate total quantity, ex: OS/4) PH/ 11,12 Remoted, 0-10V photocell/daylight sensor (indicate total quantity, ex: PH/4) MC/ SB QS* Mitered corners (indicate total quantity, ex: MC/4 for a rectangle) Seismic bracing 9 Consult factory for available options 10 Enlighted Gateway and Energy Manager (by others) plus programming required. Learn more at enlightedinc.com. 11 Compatible with 0-10V driver only. Contact factory for alternative options. 12 Select quantity of 1 for every 8 ft. (ex: ENLGHT3 for a 24' fixture run; OS4 for a 32' fixture run) *45 mitered cuts forming 90 corners only for QuickShip qualification

4 DIMENSIONS Page 4 of " " WITH REVEAL LENS (EXT/R or WD/R) MOUNTING OPTIONS SUSPENDED DIRECT (LP2SD) SUSPENDED INDIRECT (LP2SI) WALL MOUNT DIRECT (LP2WD) WALL MOUNT INDIRECT (LP2WI) SURFACE MOUNT DIRECT (LP2SMB)

5 HOUSING 100% recyclable, extruded architectural grade T6061 aluminum with.08" minimum wall thickness. ELECTRICAL LED drivers are Class 2. L80 >50,000 hours. 80+ CRI. Luminous flux +/- 5%. ETL listed for damp location with lens. LINEAR LENS OPTIONS Page 5 of 5 Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. WD (indirect only) is lightly frosted with greater light output, but possible source visibility. EMERGENCY Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for details. SUSPENSION HARDWARE REVEAL LENS EXT/R, WD/R CEILING HARDWARE (1) 4.5" canopy per power feed location, (1) bullet mount, (1) 8' aircraft cable and (1) 2" canopy (for use with T-bar mounting) per suspension point OPTIONS COMBO CANOPY Choose COMBO option to specfiy 4.5" canopies at feed locations with power feed and aircraft cable suspension mounting Canopy finish is always white. Contact factory for alternate color. FINISH Standard finish is "Ultimatte" aluminum a smooth, clean and durable finish achieved from a deepetch and two-step clear anodizing process. White, black, silver, brass and color RAL powdercoat options also available. For healthcare environments, a white antimicrobial finish (WH/AM) is also an option. ALUMINUM AL WHITE WH & WH/AM BLACK BK Eye Bolt (By Others) Gripper w/hook 2-Cable Clamp SILVER SV BRASS BRS COLOR RAL Aircraft Cable SEISMIC BRACING Add-on hardward includes cable gripper with hook, 2-cable clamp and specified length of aircraft cable per suspension point MITERED CORNERS Consult factory for mitered corner angle options OPERATING TEMPERATURE Luminaire should be installed and operated ONLY in environments where the ambient temperature ranges from -4 F (-20 C) to 122 F (50 C). Operating the luminaire in environments outside the listed temperature range voids the warranty AND may damage the product or adversely impact lamp life, lumen output and color consistency.