STONE SOURCE PAVERS DESIGN YOUR OUTDOOR LIVING. Gardens. Terraces. Urban design. Swimming pools

Transcription

1 STONE SOURCE PAVERS DESIGN YOUR OUTDOOR LIVING Gardens Terraces Urban design Swimming pools

2 For an infinite amount of exterior applications: functionality, design, finishes RESIDENTIAL VENUES FROST RESISTANT COLOR REMAINS UNCHANGED OVER TIME RESISTANT TO THERMAL SHOCK (from -50 C to +60 C) EASY TO CLEAN (also with the use of pressure washers) EASY TO INSTALL Rectified and single work-size IT DOES NOT REQUIRE SPECIAL TREATMENTS HIGH BREAKAGE LOAD (more than 1,000 kg per slab) REMOVABLE, EASY TO INSPECT AND REUSABLE (only 17 kg per slab 60x60) GARDEN PATIOS AND TERRACES STEPS AND PATHWAYS trim tiles SWIMMING POOLS trim tiles PARAPETS AND FLOWER BEDS trim tiles RESISTANT TO MOLD, MOSS AND VERDIGRIS TREATMENTS OUTDOOR APPLICATION + COORDINATED INDOORS Available in standard thickness for indoor use PUBLIC VENUES RESISTANT TO CORROSION FROM SALT ANTI-SLIP Surface finish R11 / A + B + C HOSPITALITY RESORTS INDUSTRIAL AREAS PATHWAYS AND URBAN DESIGN RESISTANT TO STAINS, ACIDS AND CHEMICALS VERSATILE Various installation systems Stone Source porcelain stoneware: excellent performance and functionality. Porcelain stoneware is a material with excellent technical and aesthetic performance. The slabs are obtained via pressing, then they undergo a vitrification process that means the complete fusion of various raw materials such as sands, quartz, feldspars, kaolin, clays and natural coloring oxides: raw materials that once fired at a temperature higher than 1250 C, lead to the creation of an incredibly hard product, with absorption levels close to zero and with unrivalled mechanical features. The performance and design of Stone Source Pavers, combined with the complete range of trim tiles, allow for the paving of outdoor areas of public and residential venues with the utmost appeal and precious finishes. NOT SUBJECT TO MOLD, EFFLORESCENCE OR TO THE FORMATION OF DARK HALOS ENVIRONMENTALLY FRIENDLY (Ecolabel certified) 1

3 5 installation systems: maximum versatility ONTO GRASS ONTO GRAVEL AND/OR SAND ADHESIVE ONTO FOOTING Easy to install, removable and repositionable. Easy to install, removable and repositionable. Carriageable floors. FLOATING ONTO SPACER FEET Easy to install, removable and repositionable. RAISED ONTO FLAT SURFACES Easy to install and inspect. Removable and repositionable. Follow laying instructions noted on page

4 RAISED AW 03 Cabin 60x60 / 24 x24 PATIOS AND TERRACES 4 5

5 RAISED EP 01 Cremo delicato 60x60 / 24 x24 PATIOS AND TERRACES + Perfect coordination between trim tiles and floor. 6 7

6 TRIM RANGE SO 10 Riser with shutter 20x120 / 8 x48 SO 10 Large step 30x120 / 12 x48 STEPS AND PATHWAYS STAIR TRIM RANGE Riser with shutter - 20x120 / 8 x48 Large step - 30x120 / 12 x48 Large step grip - 30x120 / 12 x48 8 9

7 ONTO GRAVEL SD 01 Origin 60x60 / 24 x24 STEPS AND PATHWAYS 10 11

8 ONTO GRASS LB 04 Lab_fog 60x60 / 24 x24 GARDEN Resistant to attack from mold, moss and verdigris treatments. Easy and quick installation that does not require professional installers. The installation does not require special equipment or tools. Various installation options

9 RAISED SD 02 Classic 60x60 / 24 x24 HOSPITALITY + Modern colours, natural and sought-after surfaces. + Aesthetics that do not change over time and are resistant to adverse weather and foot traffic

10 SIZES AND COLORS SIZES AND COLORS Fence AW 01 Cabin AW 03 Bench AW 05 Lab_mou LB 04 Origin SD 01 Classic SD 02 Fence AW 01 PL SQ 20 mm Cabin AW 03 PL SQ 20 mm Bench AW 05 PL SQ 20 mm Lab_mou LB 04 ST SQ 20 mm Origin SD 01 RD SQ 20 mm Classic SD 02 RD SQ 20 mm Boat AW 07 Cremo Delicato EP 01 Lagos Grey EP 03 Spirit SD 03 Pierre Bleue SO 10 Boat AW 07 PL SQ 20 mm Cremo Delicato EP 01 ST SQ 20 mm Lagos Grey EP 03 ST SQ 20 mm Spirit SD 03 RD SQ 20 mm Pierre Bleue SO 10 ST SQ 20 mm 16 17

11 URBAN DESIGN Bike rack SWIMMING POOL PROJECT TRIM TILE Flower box Trunking + Grid 15 Flower bed Bench 1 Straight border 30-30x60 / 12 x24 2 Straight corner tile 30 DX - 30x60 / 12 x24 3 Straight corner tile 30 SX - 30x60 / 12 x24 4 Straight border 15-15x60 / 6 x24 5 Straight corner tile 15 DX - 15x60 / 6 x24 6 Straight corner tile 15 SX - 15x60 / 6 x24 7 Grip border - 30x60 / 12 x24 8 Grip corner tile DX - 30x60 / 12 x24 9 Grip corner tile SX - 30x60 / 12 x24 10 Countersunk border - 30x60 / 12 x24 11 Countersunk corner tile DX - 30x60 / 12 x24 12 Countersunk corner tile SX - 30x60 / 12 x24 13 Grid 30-30x60 / 12 x24 14 Grid corner tile 30 DX - 30x60 / 12 x24 15 Grid corner tile 30 SX - 30x60 / 12 x24 16 Grid 15-15x60 / 6 x24 17 Grid corner tile 15 DX - 15x60 / 6 x24 18 Grid corner tile 15 SX - 15x60 / 6 x24 19 Curved corner tile 30-60x60 / 24 x24 20 Curved corner tile 15-60x60 / 24 x24 PARAPETS AND FLOWER BEDS The new element Coping with rompigoccia surface finish, avoids the deterioration of the underlying parapet caused by moisture and rainwater. GARDENING TRIM RANGE TRIM TILE 1 Riser with shutter 20x120 / 8 x48 2 Large step 30x120 / 12 x48 3 Large step Grip 30x120 / 12 x48 4 Coping 30x120 / 12 x48 5 Countertop 50x50 / 20 x20 6 Countertop 40x40 / 16 x16 7 Assembled countertop 50x50 / 20 x20 8 Assembled countertop 40x40 / 16 x16 9 Reverse side countertop 50 / Reverse side countertop 40 / Trunking 15x10x60 / 6 x4 x24 12 Grid 15 15x60 / 6 x24 13 U Border 15x15x60 / 6 x6 x24 14 L Border 15x15x60 / 6 x6 x

12 LAYING SUGGESTIONS RAISED ONTO FLAT SURFACES RECOMMENDATIONS FOR RAISED LAYING SUGGESTIONS Size 24"x24" - 2 cm thickness For the raised installation of 24"x24" slabs in 2 cm thickness, a maximum raise of the foot plan of 2 cm is recommended. It is possible, however, to install the 24"x24" slabs in 2 cm thickness with a raise greater than 2 cm subject to the adhesive application of a glass fibre net on the back of the tile for raises up to 12", or a galvanised sheet for raises up to 20". In both cases, 4 supports per slab are sufficient. FIXED SUPPORT Sizes 18"x36", 12"x48", 24"x48" - 2 cm thickness The 18"x36", 12"x48", 24"x48" sizes in 2 cm thickness are suitable for installation onto footing, gravel, sand, grass or onto supports at a maximum raised of 2 cm and using 6 supports per slab in order to uniformly distribute the load. For raises ranging from 2 cm the adhesive application of a galvanized steel sheet on the back of the tile is necessary. Size 36"x36" - 2 cm thickness The 36"x36" size in 2 cm thickness is suitable for installation onto footing, gravel, sand, grass. The use of the 36"x36" size in 2 cm thickness is allowed for a maximum raise of 2 cm using 5 supports per slab. Levelling disc ADJUSTABLE SUPPORT STANDARD EN FOR RAISED TEST RESULT STATIC LOAD CAPACITY LOAD BEARING TEST SIZE UNTIL 2 cm FROM 2 cm TO 12 FROM 12 TO x24 (nominal size) 4 supports per slab VERTICAL LOAD TESTED ON COLUMNS/BEAMS TEST OF PERMANENT DEFORMATION DYNAMIC LOAD CAPACITY HARD OBJECT IMPACT TEST DYNAMIC LOAD CAPACITY SOFT OBJECT IMPACT TEST AS STATED BY THE SUPPLIER OF SUPPORTS TEST NOT PASSED 4 SUPPORTS (3,4 pc/sqm) 4 SUPPORTS + GLASS FIBRE NET (3,4 pc/sqm) 4 SUPPORTS + GALVANISED STEEL SHEET (3,4 pc/sqm) LENGTH OF PANEL SIDES ORTHOGONALITY OF PANEL STRAIGHTNESS OF EDGES SELF-LEVELLING SUPPORT 24 x x36 (nominal size) 6 supports per slab THICKNESS OF PANEL WARPING OF PANEL VERTICAL WRAP OF PANELS DIFFERENCE BETWEEN OUTER EDGE AND SURFACE OF PANEL 6 SUPPORTS (3,4 pc/sqm - 24 x48 ) (6,0 pc/sqm - 18 x36 ) 6 SUPPORTS + GALVANISED STEEL SHEET (3,4 pc/sqm - 24 x48 ) (6,0 pc/sqm - 18 x36 ) 6 SUPPORTS + GALVANISED STEEL SHEET (3,4 pc/sqm - 24 x48 ) (6,0 pc/sqm - 18 x36 ) PROTECTION AGAINST CORROSION NOT APPLICABLE PLASTIC SUPPORT REACTION TO FIRE ELECTROSTATIC CONDUCTIVITY THERMAL CONDUCTIVITY NOT APPLICABLE TO PRODUCTS FOR OUTDOOR USE NOT APPLICABLE TO PRODUCTS FOR OUTDOOR USE RAISED - CURRENT REGULATIONS AND RECOMMENDATIONS TECHNICAL CHARACTERISTICS OF THE SUPPORTS 12 x48 (nominal size) 6 supports per slab 6 SUPPORTS (7 pc/sqm) 6 SUPPORTS + GALVANISED STEEL SHEET (7 pc/sqm) 6 SUPPORTS + GALVANISED STEEL SHEET (7 pc/sqm) To date, there is no existing regulatory standard regarding raised floors exclusively made for outdoor use such as the structure for Stone Source Pavers. At present the only standard available is the EN raised floors, dated August 2001, which, in its PURPOSE AND SCOPE OF APPLICATION, states that the rule is intended for raised access floors for which the main intended use is the internal fitting out of buildings. With regards to the Dynamic Loading - Hard body impact test and similar unusual situations, such as the dropping of a 4.5 kg weight from a height of 24, choose the material based on the intended use, particularly if the installation will involve a structure with a considerable height. Do not use structures higher than 4. The customer/designer must make a careful assessment of the structure, based on the end-use of the material and the technical characteristics of Stone Source Pavers. SUPPORTS MADE FROM 100% RECYCLABLE MATERIAL RESISTANT TO ACID AND ALKALI SOLUTIONS RESISTANT TO ATMOSPHERIC AGENTS RESISTANT TO TEMPERATURES FROM -30 C TO +120 C 36 x36 (nominalsize) 5 supports per slab 5 SUPPORTS (3,0 pc/sqm) NOT APPLICABLE NOT APPLICABLE To obtain a perfect drainage of the foot plan it is necessary to plan the presence of horizontal or vertical inclinations when levelling or compacting the floor. It is also useful to create a drainage layer using specific draining materials. For more information and technical specifications of raised installation higher than 20, please contact your Stone Source sales consultant. 20

13 TECHNICAL CHARACTERISTICS OF THE CERAMIC MATERIAL STANDARD EN G TECHNICAL DATA STANDARD INTERNATIONAL STANDARDS EN G SIZE CHARACTERISTICS SIDES THICKNESS WATER ABSORPTION FLEXION RESISTANCE ± 0,6% MAX (± 2,0 mm MAX) ± 5,0% MAX (± 0,5 mm MAX) AVERAGE VALUE COMPLYING COMPLYING 0,5% 0,05% S N (> 7,5 mm) R 35 N/mm 2. S N R 51,7 N/mm 2. EN 1339 T 11 Reproduction of this printed catalogue, even partially, is prohibited. IMPACT RESISTANCE DECLARED VALUE 0,88 ABRASION RESISTANCE mm mm 3 COEFFICIENT OF LINEAR THERMAL-EXPANSION _ 6,3 x10-6 C -1 RESISTANCE TO THERMAL SHOCKS PASS ACCORDING NO DAMAGE FROST RESISTANCE PASS ACCORDING NO DAMAGE RESISTANCE TO CHEMICALS UB MIN. UA ULA UHA RESISTANCE TO STAINS DECLARED VALUE 5 CENTRE 6,40 kn STATIC LOAD EN CENTRE POINT OF SIDE 7,43 kn DIAGONAL 4,14 kn EP - LB - SO SD AW SURFACE ST RD PL DM. 236/89 BCRA > 0,40 > 0,40 > 0,40 > 0,40 SKID RESISTANCE ASTM Wet and Dry > 0,60 dry 0,94 - wet 0,67 dry 0,95 - wet 0,73 > 0,60 DIN R11 R11 R11 DIN A+B+C A+B+C A+B+C ENV CL1 CL2 CL3 CL2