Callan 2 Door Wardrobe

Transcription

1 allan 2 Door Wardrobe ssembly Instructions Please keep for future reference LL-W2-SS17- Dimensions Width - 115cm Depth - 62cm Height - 195cm Tools required Important Please read these instructions before assembly If you need help or have damaged or missing parts, customerservices@habitat.co.uk or call:

2 Safety and are dvice Important Please read these instructions fully before starting assembly heck you have all the components and tools listed on the front cover and pages 2-3. Remove all fittings from the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to layout the parts before starting. Do not stand or put weight on the product, this could cause damage. ssemble the item as close to its final position (in the same room) as possible. Do not place furniture directly in front of radiators, fires or any other source of heat. Parts of the assembly will be easier with 2 people. ssemble on a soft level surface to avoid damaging the unit or your floor. We do not recommend the use of power drill/ drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. Dispose of all packaging carefully and responsibly. General care and maintenance Dust regularly with a clean dry cloth. Wipe up any spills immediately with a damp cloth and then dry the surface with a clean dry duster. Repeat this procedure for periodic cleaning. The use of furniture polish or spray is not necessary or recommended. From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. Take to your local authority waste disposal centre. Maximum weight limit Important: max load for shelf is shown below. Max. 10kg Max. 10kg Max. 10kg Max. 50kg General information If for any reason you should have problems with your Habitat product, please contact the store from which you purchased it. 1 Please retain your receipt as proof of purchase. If you have any comment or suggestions regarding this product, assembly instructions or service. Received, please contact the store or Habitat Head Office via its web site: or write directly to: Habitat Retail Ltd vebury oulevard, Milton Keynes MK9 2W

3 If you need help or have damaged or missing parts, omponents - Panels customerservices@habitat.co.uk or call: Please check you have all the panels listed below ote: There are 'atch ode' lables where shown on the indicated items, these should be retained. 11. djustable leg 1. Top 4. ottom 7. djustable shelf 2. Left side 3. Right side 5. Wall 16. Hanging block x4 6. Fixed shelf x 2 8. Front lower apron 13. Left door 14. Right door WRIG LL 9. ack rail x Hanging rail x ack panel 15. Wooden hanle x 2 2

4 If you need help or have damaged or missing parts, omponents - Fittingscustomerservices@habitat.co.uk or call: Please check you have all the fixings listed below ote: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Fittings contained in Pack 1 Ruler To help correctly identify the fixings Ø6x44mm Metal bolts x 35 Ø15x13mm Locking cams x 35 J Ø4x30mm Screws x 18 K Ø3.5x14mm Screws x 54 L Ø4x22mm Screws x 4 M Wall fitting x 2 Magnetic catchs x 4 P Ø3.5x16mm Screws x 12 Q Ø35mm ssemble Hinge plates x 8 R 20mm ail x 80 T Ø7x50mm Screws x 5 U 4mm llen key x 1 V Shelf supports x 4 W Ø35mm Hinges x 8 X Magnetic catch plates x 4 Y Ø3x12mm Screws x 8 Wedge x 2 Ø22mm Locking cams pad x 31 3

5 ssembly Instructions Step 1 x 9 L x 4 M x 8 M M L 1 4 M M L 4

6 16 x x 8 x 16 x Step 2

7 Step 3 x 6 x

8 Step 4 Q x 3 R x 1 x 2 40mm 5 Q R Q Styrofoam Use styrofoam from the packaging to protect the components while building 4 11 Q Q 11 Step 5 x

9 Step 6 x Step 7 x 2 Q x 2 R x 1 Q Q 9 R 6 Q 6 4 8

10 Step 8 x Step 9 x

11 Step 10 M x 4 P x 80 P 10 M M M M M Step

12 Step 12 x Step 13 x

13 Step 14 Step 15 Y x 31 Y Y Y Y Y Y 12

14 Fitting Wall Strap Step 16 K x 2 x 4 Warning : In order to prevent overturning this product must be used with the wall attachment device provided. Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent topple over :- Use the wall attachment devices provided ever allow children to climb or hang on furniture Unless specifically designed to accommodate, do not set TV's or other heavy objects on top of this product Due to the different types of wall you might have in your home Habitat cannot provide you with the exact fixings for your wall-we only supply you with the fixings for attaching the brackets to the furniture.you must assess the type of wall you want to fix the furniture to and provide the appropriate type of wall fixings.if you are in any doubt about which type of wall fixings to use please seek professional help or ask your local hardware store. lways ensure that wall to be drilled into is free from hidden electrical wires, water and gas pipes. For more information about wall fixings please refer to the Wall Mounting and Fixings Guide at the back of this instruction. K 800mm K K 1936mm 13

15 Step 17 T x 4 5 T T T 3 T Step T 14

16 Step 19 U x 8 x 16 V x 4 W x 8 J x 4 13 U U U V 13 U U 15 J V 15 V W W 14 U J J V U 14 V U U 15 15

17 Step 20 x mm 16

18 Step 21 nti-topple warning label should be visible on inside of back panel when the wardrobe doors are open djust foot to contact floor 17

19 Step 22 a b c a: To move door up or down b: To move door in or out c: To move door left or right 18

20 Step 22 Step 23 X x 2 ote : Please use supplied wedge as shown on uneven floors. X 19

21 Guide to - Wall Mounting & Fixings Important note: Wall Fixings: - because of the variety of different wall types, Habitat cannot provide you with the exact fixings you will need to fix this product to the wall. You must first identify the type of wall you intend to fix product onto and then contact your local hardware store to get the appropriate fixings. Important: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. onsult a qualified tradesperson if you are unsure. Hints: 1: General rule: lways use a larger screw and wall plug if you are not sure. 2: nsure you use the recommended drill bit to match the wall plug and hole size. 3: nsure you drill the hole horizontally, do not force the drill or enlarge the hole. 4: Take extra care when drilling high walls, ceilings and ceramic tiles. nsure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking. 5: nsure wall plugs are well fitted and are a tight fit in the drilled hole. Types of walls You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone or wood. o.1 General Purpose wall plug o.3 avity Fixing wall plug o.5 Hammer Fixing wall plug Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general purpose wall plugs can be used. o.2 Plasterboard wall plug For use with plasterboard partitions or hollow wooden doors. o.4 avity Fixing-Heavy Duty wall plug For use with walls stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. lways check the fixing is secure to the retaining wall. o.6 Shield nchor wall plug Heavy loads For use when attaching light loads on to plasterboard partitions. are & Maintenance For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks. Safety: lways check the fitting and location to ensure your safety in and around the home. For use with heavier loads such as TV & HiFi speakers and satelite dishes etc. Fitting: From time to time check the fitting to ensure the wall plugs or screws do not become loose.