TENDER DOCUMENT VOL - II (FINANCIAL BID) CONSTRUCTION OF BOUNDARY WALL FOR ICSI-CENTRE OF EXCELLENCE (CoE) KOLKATA

Size: px
Start display at page:

Download "TENDER DOCUMENT VOL - II (FINANCIAL BID) CONSTRUCTION OF BOUNDARY WALL FOR ICSI-CENTRE OF EXCELLENCE (CoE) KOLKATA"

Transcription

1 TENDER DOCUMENT VOL - II (FINANCIAL BID) CONSTRUCTION OF BOUNDARY WALL FOR ICSI-CENTRE OF EXCELLENCE (CoE) KOLKATA AT PLOT NO. IIA/35, ACTION AREA IIA, NEW TOWN, KOLKATA, WEST BENGAL Pages (1 5) 0

2 INDEX SR.NO. DESCRIPTION PAGES FINANCIAL BID (VOL II) 1 Section-I Bill Of Quantities Section-II List of Makes 5-5 1

3 SECTION I SCHEDULE OF QUANTITIES CONSTRUCTION OF BOUDARY WALL FOR CENTRE OF EXCELENCE (COE) - KOLKATA Sl. No. Description Unit Qty Rate Amount 1 Earth Work 1.01 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including dewatering (if any), strutting (if any) disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. Cum Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. Disposal of surplus earth by mechanical 1.03 transport including loading, unloading for a lead up to Km. 2 Concrete Work Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work 2.01 up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor 2.02 blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2.03 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) Cum Cum Cum Cum 10 Sqm

4 Extra for providing and mixing waterproofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Kg Sqm Reinforced Cement Concrete work Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and 3.01 reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note: - Cement content considered in this item 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). a. All works up to plinth level Cum b. All works above plinth level up to floor V level Cum Steel reinforcement for R.C.C. work including straightening, cutting, bending, 3.02 placing in position and binding all complete up to plinth level. Thermo- Mechanically Treated Bars (TMT) Kg Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo- Mechanically Treated Bars (TMT) Centring and shuttering including strutting, propping etc. and removal of form for : Kg

5 a. Foundations, footings, bases of columns, etc. for mass concrete b. Lintels, beams, plinth beams, girders, bressumers and cantilevers c. Columns, Pillars, Piers, Abutments, Posts and Struts 4 Brick Work Brick work with clay fly ash F.P.S. (non modular) brick of class designation 7.5 in 4.01 superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) 5 Steel Work Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using 5.01 structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete 6 Finishing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). Sqm Sqm Sqm Cum Kg Sqm Finishing walls with textured exterior paint of required shade : New work (Two or more coats 3.28 ltr/10 sqm) over and including priming coat of exterior primer 2.20kg/ 10 sqm Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work TOTAL = Sqm Sqm

6 SECTION II LIST OF APPROVED MAKES OF CIVIL ITEMS Sl. No. Item No. Approved Makes 1. 1Cement (OPC- 53 Grade) Ultratech/ACC/Ambuja/Lafarge./DALMIA/ Aditya Birla/Shree Cement/ J K cement/gujrat Ambuja 2. 2Reinforcement Steel (fe-415/500) TATA/ SAIL/ Jindal Steel/RINL/Vizag Steel 3. Sand As per CPWD specifications/ IS code 4. 3Stone Aggregate As per CPWD specifications/ IS code 5. 4Clay Fly Ash Bricks As per CPWD specifications/ IS code 6. 7Water Proofing Chemicals CHOKSEY/FOSROC/BASF/ASIAN (Concrete / Mortar Admixtures). CHEMICALS/ SIKA/ PIDILIT 7. 8Anti-termite treatment Tricel/ Biflex 8. Texture Paint Heritage / Spectrum 9. Synthetic Enamel Paint Asian Paint/ Berger Paint/ ICI Paint/ J&N Paint/ Nerolac Paint/ British paint/ Luxol/ Unicem 10. Metal Primer Asian metal primer, Nerolac Palm tree Red oxide Primer, Nerolac Iolite anti-corrossive red oxide primer, Nerolac zinc chromate primer 11. MS Section Jindal/Tata /Sail 12. Fasteners/Rawl Plug Fisher/Hilti/Dash Fasteners 5