IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531

Transcription

1 IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA Contact Name Tim A. Barney, President Telephone (360) Effective Date of Scope November 30, 2017 Accreditation Standard ISO/IEC 17025:2005 ASTM E329: Test methods referenced under Concrete testing standard, ASTM C1077: ASTM C31 ASTM C39 ASTM C117 ASTM C127 ASTM C128 ASTM C136` ASTM C138 ASTM C143 ASTM C172 ASTM C173 Standard Practice for Making and Curing Concrete Test Specimens in the Field Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate Standard Test Method for Sieve Analysis of Fine and Coarse Aggregate Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete Standard Test Method for Slump of Hydraulic-Cement Concrete Standard Practice for Sampling Freshly Mixed Concrete Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone Page 1 of 6

2 ASTM C231 ASTM C511 ASTM C617 ASTM C1064 ASTM C1231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes (Section 7 only) Standard Practice for Capping Cylindrical Concrete Specimens Standard Test Method for Temperature of Freshly Mixed Hydraulic- Cement Concrete Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens ASTM E329: Test methods referenced under Soil and Rock Inspection and Testing standard, ASTM D3740: ASTM D422 ASTM D559 ASTM D698 ASTM D854 ASTM D1557 ASTM D4318 ASTM D5220 ASTM D5240 Standard Test Method for Particle-Size Analysis of Soils Standard Test Methods for Wetting and Drying Compacted Soil- Cement Mixtures Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort ( ft-lbf/ft 3 (600 kn-m/m 3 )) Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft 3 (2,700 kn-m/m 3 )) Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate TL-779 Page 2 of 6

3 ASTM E329: Test methods referenced under Steel Testing and inspection: AWS D1.1 AWS D1.2 AWS D1.3 AWS D1.4 Structural Welding Code (Section 6 only) Structural Welding Code Aluminum (Section 5 only) Structural Welding Code-Sheet Steel (Section 6 only) Structural Welding Code-Reinforcing Steel (Section 7 only) ASTM E329: Test methods referenced under Sprayed Fire Resistive Inspection and Testing standard, ASTM E1513: ASTM E605 ASTM E736 Standard Test Methods for Thickness and Density of Sprayed Fire- Resistive Material (SFRM) Applied to Structural Members Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members ASTM E329: Test methods referenced under Bituminous Inspection and Testing standard, ASTM D3666: ASTM C128 ASTM D2041 ASTM D6926 ASTM D6927 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures ASTM E329: Test methods referenced under Masonry testing, ASTM C1093: ASTM C109 ASTM C140 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units TL-779 Page 3 of 6

4 ASTM C184 Standard Test Method for Fineness of Hydraulic Cement by the 150- µm (No. 100) and 75-µm (No. 200) Sieves (Withdrawn 2002) ASTM C188 ASTM C207 ASTM C270 ASTM C404 ASTM C746 ASTM C780 ASTM E518 Standard Test Method for Density of Hydraulic Cement Standard Specification for Hydrated Lime for Masonry Purpose Standard Specification for Mortar for Unit Masonry Standard Specification for Aggregates for Masonry Grout Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry Construction Material Testing (CMT): Concrete: ASTM C78 ASTM C192 ASTM C193 ASTM C805 Aggregates: ASTM C29 ASTM C 70 ASTM C117 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory Standard Test Method for Rebound Number of Hardened Concrete Standard Test Method for Bulk Density ( Unit Weight ) and Voids in Aggregate Standard Test Method for Surface Moisture in Fine Aggregate Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing TL-779 Page 4 of 6

5 ASTM C142 ASTM C702 ASTM D75 Standard Test Method for Clay Lumps and Friable Particles in Aggregates Standard Practice for Reducing Samples of Aggregate to Testing Size Standard Practice for Sampling Aggregates Masonry: ASTM C1019 ASTM C1314 Soils: ASTM D558 ASTM D698 ASTM D1140 ASTM D1556 ASTM D2419 ASTM D2487 ASTM D2488 ASTM D6938 Standard Test Method for Sampling and Testing Grout Standard Test Method for Compressive Strength of Masonry Prisms Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort ( ft-lbf/ft 3 (600 kn-m/m 3 )) Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) Standard Practice for Description and Identification of Soils (Visual- Manual Procedures) Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) Bituminous: ASTM D75 ASTM D979 Standard Practice for Sampling Aggregates Standard Practice for Sampling Bituminous Paving Mixtures TL-779 Page 5 of 6

6 ASTM D2041 ASTM D2627 ASTM D2950 ASTM D3549 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures Standard Specification for Diacetone Alcohol Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens Steel: AWS D1.8 Structural Welding Code Seismic Supplement RSSC Specification for Structural Joints Using High Strength Bolts (Section 9 only) AISC 360 AASHTO R-18: Specification for Structural Steel Buildings (Chapter N only) Standard Recommended Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories TL-779 Page 6 of 6