FAST SIMPLE QUALITY COST-SAVING SUPER SMOOTH GREEN BUILDINING SOLUTION AIRCRETE PARTITION PANELS

Transcription

1 FAST SIMPLE QUALITY COST-SAVING SUPER SMOOTH GREEN BUILDINING SOLUTION AIRCRETE PARTITION PANELS

2 AIRCRETE PARTITION PANELS THE INTELLIGENT WALL SOLUTION versatile application - HIGH-RISE - Commercial Buildings - Hotels and resorts - Residential construction FAST & SIMPLE INSTALLATION, SUPER SMOOTH FINISHING, NO ON-SITE WASTE, EFFICIENT AND TOTAL COST REDUCTION ON YOUR PROJECT AIRCRETE Partition Panels are a superior building solution for all internal applications such as separation walls, corridors or storage rooms in residential and commercial constructions. The entire non-load bearing structure of your building can be developed with a single product which allows reliable and efficient construction for contractors. Partition Panels are very fast and easy to install. They can be delivered in different sizes. The panels are a light (density of 600kg/m3), and at the same time, solid material. With the basic installation tools, the walls are ready after fill ing the joints. AIRCRETE Partition Panels are impermeable to moisture, thus they can be installed at a much earlier stage of construction. Additionally, non-sensitivity to moisture makes them a perfect solution for bathrooms, kitchens and storage rooms. The attractive SUPER SMOOTH surface results in an easy and cost effective finish. After skimming the joints, the wall is directly ready for wallpapering and/or painting, providing significant savings to the contractors. AIRCRETE Partition Panels are the superior solution for high quality internal walls in your commercial and residential constructions!

3 Advantages of Aircrete PANELs = Value to Customer Fast installation and easy workability with simple tools result in lower construction costs SUPER SMOOTH finish eliminates the need for expensive and time-consuming stucco Efficient construction logistics as AIRCRETE panels are a complete wall solution Excellent fire resistance makes it a safe solution for versatile applications Non sensitivity to moisture makes it a perfect material for bathrooms and humid areas No waste on-site and easy installation as panels are prefabricated at factory level Highest product accuracy (+/- 1mm) ensures exact fit on-site Aircrete, otherwise known as Autoclaved Aerated Concrete (AAC), is a GREEN precast building material with a proven performance in Europe for more than 70 years. It is produced from basic natural raw materials such as: water, sand, cement Lightweight Soundproof Fast Construction aircrete advantages A Energy Saving Fire Resistant and lime. The unique material characteristics allow for numerous advantages over conventional technologies of Easy Installed Versatile industrial and commercial building. Aircrete is increasingly used as a preferred building material Durable by developers, architects and home builders worldwide. Accurate Recyclable Breathable Natural Insulation Super Smooth Surface

4 STEP-BY-STEP PANEL INSTALLATION Step 1 Panel lifting car Step 2 Panel pick up Step 3 Panel transport SUPER SMOOTH FINISH AIRCRETE Partition Panels have a unique SUPER SMOOTH surface due to the most innovative European production technology. A double wired high-speed cutter closes the aerated concrete pores leaving an exceptionally smooth surface on both sides of the panel. Step 4 Installation rubbers Step 5 Gluing connection panel Step 6 Panel lifting After installation, the panels are ready for wallpapering and/ or painting. Developers will experience the advantage of significant savings in building time and finishing cost while the installation workers will have a much easier job in finishing the walls. Step 7 Step 8 Step 9 Panel positioning Panel fixing with positioning tool Check alignment and position Step 10 Step 11 Step 12 Install final wooden wedge Remove glue from joints Connection anchor in roof plate Step 13 Joint filling with foam Step 14 Milling of installation canals for wiring and electricity boxes Step 15 Joint skimming (1mm); the rest of SUPER SMOOTH surface is ready for painting/wallpapering Final AIRCRETE Wall Solution

5 DIMENSIONS AND TECHNICAL SPECIFICATIONS DELIVERY PROGRAM Density Thickness (mm) Length (mm) Height (mm) A-600 (standard) A-800 (sound insulating) * Moisture content is max. 20% on delivery MATERIAL CHARACTERISTICS Density A-600 A-800 Average Compressive Strength 4,5 MPa 5,6 MPa Thermal conductivity (λ-lambda) 0,16 W/mK 0,22 W/mK Modulus of elasticity 2000 N/mm N/mm 2 Shrinkage due to drying Does not exceed 0.20 mm/m DENSITIES AND WEIGHTS Density Dry mass Design weight incl. reinforcement Transport weight incl. reinforcement A-600 A kg/m kg/m kg/m kg/m kg/m kg/m 3 THERMAL RESISTANCE Density Thickness U-value (W/ M2K) R-value (M2K/ W) Sound insulation (db) A mm mm A mm Partition Panels made using AIRCRETE Europe technology are in compliance with the latest norms: German standard DIN 4223: , European Norms EN 12602:2008 as well as the American ACI R-09 and ASTM C

6 Stay in touch with Aircrete Europe EN BR FR SP RU Aircrete Europe Munsterstraat ED Oldenzaal The Netherlands Phone: +31 (0)