VIA 3 LED RECESSED WALL WASH V. 2 W W W. L U M E N W E R X. C O M

Transcription

1 DESCRIPTION PROJECT: Elegant and flexible, the Via 3 Recessed Wall Wash features our Asymmetrical Lens Optic for TYPE: smooth, comfortable and efficient NOTES: illumination of vertical surfaces. Via 3 Recessed Wall Wash offers a wide range of lumen packages, color choices, mounting and electrical and controls options. It is part of the larger Via family, which includes visually coordinated recessed and mounted luminaires, as well as other light distributions, including wall washing and Grid - shown with WRO2 optics asymmetric optics. ORDER GUIDE VIA3R WRO2 LED up to 133 lm/w performance IC RATED LUMINAIRE ID OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. VIA3R - via 3" recessed WRO2 - wallwash refractive optic LED - high performance LED 80-80CRI min. low output 375lm/ft k version CRI medium output 500lm/ft k max. high output 750lm/ft k #### - other required lm/ft LUMINAIRE LENGTH VOLTAGE DRIVER ELECTRICAL MOUNTING Standard sections - 2', 3', 4', 5', 8' & 12' For all other specify length #FT - nominal length in feet #IN - length in inches Continuous Run - for luminaires over 12' Minimum Individual section 2' V V UNV - 120V-277V V (not available with Lutron) D1-1% dimming 0-10V DA - Dali LTEA2W - Lutron 1% - 2 wires 120V L3DA3W - Lutron 1% - 3 wires L3DAE - Lutron 1% EcoSystem LDE1 - Lutron 1% Eco Dim to Off LDE5 - Lutron 5% EcoSystem 1-1 circuit +#EB - emergency battery (min 4' fixture, except Lutron) +#EM - emergency light circuit +#NL - night light circuit +GTD### - generator transfer device, 120V or 277V TG9 - tegular 9/16" TG15 - tegular 15/16" TB9 - t-bar 9/16" TB15 - t-bar 15/16" ST - screw slot t-bar DTR - drywall trim DTL - drywall trimless DMF - drywall mud flange See page 2 for ordering code detailed information FINISH CONTROLS OPTIONS W - matte white CF# - custom finish specify RAL# GROUPED CONTROLS LSC - Local system NSC - Network system FU - fuse FWC - flexible whip cable (6' std) CP - Chicago Plenum CU - custom CROSS SECTION 3 3/ VIA3R - wall wash File Name: VIA3-RECESSED-WW-SPEC Page: 1 / 5 TECHZONE & USG Compatible with ceiling

2 OPTICS WALLWASH REFRACTIVE OPTIC V. 2 (WRO2) - The LumenWerx Wallwash Refractive Optic V. 2 (WRO2) delivers smooth vertical illumination with a gentle gradient and soft visual cut off. With peak intensity at 21º above nadir, the precise WRO2 configuration creates a strong downward component without shadows or hot spots. No external shielding is required. Microstructure material applied to the snap-in lens provides the precise refractive power and visual comfort, while achieving high luminous efficacy of 133 lumens per watt. 18" LUMINAIRE LENGTH Via 3 is made up of standard 2, 3, 4, 5, 8 and 12 foot sections that may be joined together to create longer continuous run lengths. Exact run length must be noted in the product code. The minimum individual section available is 2 foot. All individual sections are joined together onsite using the joiner kits provided. LumenWerx offers joiner kits that are extremely simple to work with in the field and result in a fixture that appears virtually seamless with no light leak at any connection. Joining system 21º t-bar Mud flange Avg. Max Min Avg/Min Max/Min LIGHT SOURCE - LED Custom Linear array of mid-flux LED s are aluminum-mounted for optimal thermal performance. Available in 3000K, 3500K and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. AT 4000K low output 4000K medium output 4000K high output 4000K Trim & Trimless ELECTRICAL Factory-set adjustable output current electronic driver with V AC line input. Dimmable from 100% to 1% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers. EMERGENCY Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minutes operation, up to 1000 lumens per 4ft (25ºC) emergency lighting output. Recharge time of 24 hours. File Name: VIA3-RECESSED-WW-SPEC Page: 2 / 5

3 MOUNTING OPTIONS Recess mount into exposed or concealed T-Bar or Tegular grid ceiling Via 3 is fully compatible with Armstrong Techzone & USG ceilings With Grouped Controls, on-board or remote sensor are part of a either a local or network sensor infrastructure. It s possible to scale the controls, from a switch to a fixture setup, to a room or a whole building Occupancy and or daylight harvesting. TG9 - tegular 9/16" TG15 - tegular 15/16" TB9 - t-bar 9/16" TB15 - t-bar 15/16" ST - screw slot t-bar Mounting for drywall ceilings are available with visible trim, mud flange trim or trimless GROUPED CONTROLS Local systems permit added flexibility and interconnectivity. Each fixture can now become part of a group of fixtures and be controlled by On-Board or remote sensors as well as wireless switches or controllers. With this architecture, it is now possible to have fewer fixtures with On-Board sensor which control all of the fixtures of the lighting zone. In order to have grouped controls programmed in factory, it is required that a floor layout with requested grouping and functionality be supplied. Field commissioning is also possible but must be requested and discussed before final Purchase Order is placed. 4 5/8" 3 9/16" 4 5/32" with flanges DTR - drywall trim 3 3/ 3 5/32" 3 3/ DTL - drywall trimless Network Controls, Lumenwerx fixtures are compatible with most popular BMS integration protocols such as DALI, DMX, EnOcean, BACnet, Enlighted and Lutron Ecosystem just to name a few. Field commissioning is usually required and details must be discussed before final Purchase Order is placed. Please contact our controls department at controls@lumenwerx.com for further assistance. 3 3/ 5 5/8" with flanges DMF - drywall mud flange FINISH Interior - 95%, reflective matte powder coated white paint Exterior - matte white or aluminum powder coating. Custom finishes are also available. CONTROLS LumenWerx offers several options for integrating occupancy and daylight controls. Whether a sensors control its own fixture or is part of a group of fixtures, lights can be automatically controlled according to different energy saving strategies. File Name: VIA3-RECESSED-WW-SPEC Page: 3 / 5

4 CONSTRUCTION Housing - Extruded Aluminum (0.095" nominal) up to 90% Recycled Content Interior brackets - Die formed cold rolled sheet steel 20 gauge thick Joining system - Die cast Zinc (0.95" nominal) and die Formed galvanized sheet 18 gauge Reflectors - Extruded Aluminum (0.080" nominal) thickness/painted White. Specular reflectors - Semi-specular anodized aluminum sheet 0.020" thickness Lens - Extruded Clear Acrylic 0,050 nominal thickness. Recessed flanges - Extruded Aluminum (0.075" nominal) up to 90% Recycled Content Mud flange - Extruded Aluminum (0.075" nominal) up to 90% Recycled Content Slip-through bracket - Die Formed galvanized sheet 18 gauge End plate - Die formed cold rolled sheet steel 18 gauge thick WEIGHT Via 3 4ft lbs kg Via 3 8ft lbs kg Via 3 12ft lbs kg CERTIFICATIONS ETL - Rated for Indoor Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No Chicago plenum - City of Chicago Approved (CCEA) IC rated - suitable for direct contact with insulation. WARRANTY LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. File Name: VIA3-RECESSED-WW-SPEC Page: 4 / 5

5 375 LUMEN AT 80CRI - LOW OUTPUT low output 3000K low output 3500K low output 4000K LUMEN AT 80CRI - MEDIUM OUTPUT medium output 3000K medium output 3500K medium output 4000K LUMEN AT 80CRI - HIGH OUTPUT high output 3000K high output 3500K high output 4000K File Name: VIA3-RECESSED-WW-SPEC Page: 5 / 5