Bill of quantities NEW DWELLING(security office) Bill number 1 Item Description Qty Unit

Transcription

1 MGM Architects & Engineers PTY(LTD) Bill of quntities NEW DWELLING(security office) Bill number 1 Item Description Qty Unit B EXCAVATIONS AND EARTHWORKS Unless other wise stted, shll include for ) bck filling with selected excvted mteril & consolidting. Surfce tretment; compction before filling / foundtion. b) disposl of surplus soil s directed & keeping ll excvtions free from wter unless other wise mesured seprtely. c) ny dditionl excvtion for working spce. Excvtion & Erthwork Supports B.1 Clering nd preprtion of the site including cutting down nd removl of top soil up to depth of 150mm nd disposed off s directed. 46 m² B.2 Excvtion of trenches for wll foundtions not exceeding 1.5mm deep in ny mteril except rock requiring blsting nd removl of surplus s directed m³ B.3 Filling & Bck filling B.4 Filling round strip foundtions with selected excvted mterils: rm nd compct well 1.85 m³ B.5 Filling under floors with grvel or other pproved qulity imported filling mteril. Spreding, wtering nd well rmming in 3 m³ B.6 Anti - termite tretment to fillings nd tops of foundtions: Approved insecticide tretment: pplied in ccordnce with the mnufcturer's printed instructions : include for 10 yers wrrnty period. 46 m²

2 C CONCRETE WORKS shll include for vibrting, curing etc. nd mking good fter setting of concrete. b shll include for supplying nd lying of guge 1000 polythene on ground, where concrete is in direct contct with ground, before pouring concrete unless other wise mesured seprtely. In Situ Concrete C.1 Supplying nd plcing of 20MP concrete s specified to foundtion footings 3.26 m³ C.1 Ditto: 75mm thick floor beds m³ Lintel C.2 Lintel size 110 x 75 mm pre cst: 1600mm 2 No C.2 Lintel size 110 x 75 mm pre cst: 1100mm 2 No C.2b Lintel size 110 x 75 mm pre cst: 2600mm 2 No C.2c Lintel size 110 x 75 mm pre cst: 1800mm 3 No C.2d Lintel size 110 x 75 mm pre cst: 2800mm 1 No D MASONRY WORKS shll include for lifting, hndling, weighting ll rough nd fir cutting, plumbing ngles, norml stright cutting, forming rebted revels nd rking out joints for plstering. Msonry Work Up to DPC level D.1 One brick (220mm) Thick stock brick wlls in cement snd (1:5) mortr in foundtions m² Brick work D.2 220mm thick wlls in stndrd precst Stock bricks in 1:5 cement snd mortr for wll m²

3 E THERMAL AND MOISTURE PROTECTION Dmp Proof Course E.1 Horizontl dmp proof course: bituminous: lid horizontlly on to of the surfce bed to receive stock bricks wlls m E.2 Horizontl dmp proof course: bituminous: lid horizontlly on to of the surfce bed to receive stock bricks wlls m Dmp proof membrne E.3 Horizontl dmp proof membrne :1000 guge polythene membrne: lid on compcted fillings (mesured seprtely ) in ground floor beds. ( The rte shll include for lps & wstge) m² F STRUCTURAL TIMBER WORKS Fbricting nd erecting frmed structures F.1 Flt roof truss; spnning 3516mm wide x 360mm high, with over-hng of 500mm on both sides consisting of 114x38mm rfter members hooked to wll ll s per detil drwing shll include for pinting specified. 5 No Purlins F.2 Supplying & fixing of Purlins, 75 x 50mm: niled to roof trusses ( mesured seprtely )t 900mm centres: complete with ll the required pint works nd ll necessry supports 5 No F.5 Allow sum for ny other item required for the construction nd completion of the roof frmework, which re not covered under the bove items. 1 Item F.6 Allow Insoltion between roof sheets nd rfters [silver foil side, fced the sheets nd the blck prt fcing the bottom. 1 m2

4 G ROOF COVERINGS, AND PLUMBING shll include;.01 All, rivets, nils, clips, strips nd delivering nd fixing in position..02 All timber shll pply Priming bcks & pplying two cots of n pproved wood preservtive before fixing..03 All timber including plywood sheets shll hve Finl Finish; Two cot of wood preservtive, two cots of primer, two cots of wood sheen spry pint. Roof Covering G.1 IBR 686 Roof sheeting pre-pinted: fixed with nils to 75 x 50mm purlins ( mesured seprtely) nd rubber cping to tops of nils m² H DOORS AND WINDOWS The work shll include supply, fbricte nd instlltion of doors, windows, mde out of pproved qulity Aluminium or equivlent to be finish s per the respective specifiction & drwings. b Doors & Windows frme sections to be of, b.01 Outer frme & Inner frme - 75mm x 100mm minimum - Finish Size, unless otherwise stted. b.02 The contrctor shll submit shop drwings for the pprovl of the Architect & Engineer, prior to fbriction. b.03 The contrctor shll refer to ll relevnt specifictions nd drwings prior to pricing nd it shll be his responsibility to complete the sid works to the entire stisfction of the Engineer t no dditionl cost. b.04 All smples shll be provided for Engineer's pprovl prior to purchse of mteril. b.05 Where swing doors hs been specified prices shll include for provisions of floor hinges. CONTINUES ON THE NEXT PAGE

5 c s shll include; c.01 Hoisting nd fixing in position, drilling nd mking good. c.02 Brss Nils, Brss screws, glue, rwl plugs etc,. c.03 Frming together ll work in ccordnce with the best prctices. c.04 Priming bcks & pplying two cots of n pproved wood preservtive before fixing. c.05 Finl Finish; Two cot of wood preservtive, two cots of primer, two cots of wood sheen spry pint. c.06 to include for providing sundry items relted to the door & windows like Glss blocks etc.. where necessry s Architecturl Feture to the door or window. c.07 shll include for 5mm thick cler flot glss/ wired glss /tinted glss /trnslucent glss s pproprite to suit the respective doors nd windows s shown in the drwings. d e Only 16% of moisture content is recommended for ll timber. All timber shll be pressured impregnted termite proofed, sesoned, plned timber nd snd ppered by hnd to hve smooth finish nd to receive pint. f Preservtive Tretment f.01 Minimum of two ppliction of wood preservtive or pproved equivlent. f.02 Preservtive tretment for bck of door & door frme in contct with msonry or concrete. g Sizes g.01 The sizes given in the drwings nd description of Bill of Quntities re finished sizes nd subject to sme permitted in the specifictions. g.02 The contrctor shll check the mesurement of openings physiclly t the site before fbricting the doors & windows. CONTINUES ON THE NEXT PAGE

6 g.03 Door / window frmes re twice rebted nd bcked s pproprite. The sizes re s given in the detil drwing. g.04 Mullions nd trnsoms shll be rebted or non rebted s pproprite. The sizes re s given in the detil drwing. g.05 Finished thickness of door & window sshes shll be 32mm nd if there is ny discrepncy in the sizes nd detil given in the drwings nd Bill of Quntities, the sme given in the drwing shll previl. h Ironmongery h.01 All the locks shll be union / yle or pproved equivlent supplied by uthorized deler ppointed by the mnufcturer & pproved by the Architect. 2 No Timber Doors H.1 813x2100 Medium duty commercil [internl] 1 No H.2 813x2100mm Hrdwood Solid door lminted doubled sided. [externl] 1 No Windows H.5 PT 912 Aluminium Window [bronze] 1 No H.6 PT69 Aluminium Window [bronze] 1 No H.7 Purpose Mde Glss Wll [mesure on site] 1 No J FLOOR, WALL AND CEILING FINISHES b c The contrctor is dvised to refer to the specifiction prior to pricing of this section of work The rte shll include for ll temporry rules etc. for rking out joints of new brick work. All smples shll be provided for pprovl by the Engineer prior to purchse of mterils. Wll Finishes J.1 19mm thick cement & snd (1:5) plster finished trdition scrtch plster with wood flot on externl fces, on brick work surfces m² J.2 19mm thick cement lime snd (1:1:5) plster finished smoothly on internl fces, on brick work surfces m² Floor finishes J.3 Txes Grey mtte cermic floor tiles 430 x 430 mm. [for both security office nd bthroom] 12 m²

7 K PAINTING b shll include for preprtion of surfce clening down, smoothing, knotting, stepping etc. protection of floors nd fitting, removing & replcing door nd window, furniture, nd clening windows etc.upon completion. Pint shll be from pproved colour with pproved mnufcturer. Wlls K.1 Prepre nd pply one cot of primer nd two cots of wether shield pint of pproved colour nd qulity to externl fces of wlls m² K.2 Prepre nd pply one cot of primer nd two cots of emulsion pint of pproved colour nd qulity to internl fces of wlls m² L WATER SUPPLY, SEWARAGE & DRAINAGE WORKS All Provisionl Plumber b Unplsticized polyvinyl chloride (upvc) pipes shll be used in the plumbing instlltion nd they must confirm in every respect to the requirements of SABS. All fittings nd pipe specils used in the plumbing instlltion shll be suitble nd comptible with ll respects to the pipe line to which fittings nd specils re fixed. c All snitry fittings & fixtures shll be SABS pproved. d s for plumbing work shll include for:- d.01 Complying with the relevnt SABS stndrd s given under the specifictions nd with the regultions of the Locl Authority nd or ny other relevnt uthorities. d.02 Cutting nd wste of pipes etc., nd joining pipes. CONTINUES ON THE NEXT PAGE

8 d.03 All specils such s elbows, bends, tees, junctions, plugs, reducers nd similr pipe fittings except for vlves which will be mesured seprtely. d.04 Connecting pipes to snitry fixtures nd pplinces. d.05 Csing to brick wlls etc. nd mking good ll works disturbed. d.06 Necessry screws, nils sockets, connection bck nuts stndrd pipe fixing or supporting clips, sddles, brckets, holder bts, strps etc. d.07 Connecting of different types of pipes. d.08 Testing nd disinfection fter completion. d.09 Excvtion, bckfilling, disposl of surplus soil for items which were specificlly mentioned. e s for snitry fittings shll include for:- e.01 Fittings such s tps, wste wter outlet, internl overflows etc. nd supporting brckets, incidentl mterils for fixing, unless otherwise mesured seprtely. e.02 Assembling, jointing together fixing components prts, nd jointing to pipes including necessry coupling nd for leving perfectly clen nd in perfect working order on completion. e.03 Jointing nd connecting of pipes to snitry fittings. e.04 Testing nd commissioning of the instlltion. e.05 Mking good of the work disturbed. e.06 Submitting smples for the pprovl of the Engineer. e.07 Protecting the works. f s for dringe work shll include for :- f.01 Lying of pipes to flls. f.02 Excvtion, bckfilling, disposl of surplus soil f.03 All pipe specils such s bends, junctions, elbows, tees etc. f.04 Connection to sides of mnholes etc. f.05 Providing sleeves etc., when pipes pss through wlls, foundtions etc.

9 Cold Wter Instlltion upvc pipe with ll necessry specils lid in wter distribution system buried in brick wlls / floor or clipped to ny loction where necessry. L.1 20mm dimeter. [my chnge in lenghts depending where the connection is] 50 m Tps nd Vlves All tps nd vlves should be brss, finish to be chrome plted or s per detil nd s pproved by the Engineer. to include for joints to pipe work. L.2 20mm dimeter Bib Tp 1 No L.3 25mm dimeter gte vlve. 2 No L.4 20mm dimeter ngle vlve. 1 No L.5 25mm dimeter isoltion vlve. 1 No Wste nd Sewge Disposl upvc pipe with ll necessry specils lid for internl nd externl wste nd sewge Disposl system buried in brick wlls / floor, clipped to ny loction or lid through ground soil where necessry. L.6 50mm dimeter. 18 m L.7 110mm dimeter. 10 m L.8 Fittings to 110 mm pipe work 8 No