apexfacades.com apexfacades.com. Keystone Pg- 1

Transcription

1 apexfacades.com apexfacades.com K E Y S T O N 1.2E H I G H P E R F O R M A N C E Keystone Pg- 1 2 C U R T A I NPrintedW A L L on 04/03/18

2 THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.2 Keystone Pg- 2

3 Series Curtain Wall is a thermally broken 2.0 inch stick built Curtain Wall system that is suitable for low to high rise applications that require a high performance glazing system. The versatile installation methods of Keystone ensure compatibility with a wide variety of project applications. Keystone 550 series Curtain Wall system features a split-mullion design for simplified field installation, without compromising performance. This captured system is available in array of back section dimensions to meet your project specific requirements. Finish options include anodized, powder, wet paint, and split finishes. FEATURES Great value with simplified fabrication and installations methods that lead to cost savings Industry leading thermal and structural performance Industry standard and custom caps available Versatile - accomodates captured, two sided, or four sided SSG Corner and Splayed Applications Shear block and screw spline design Multipurpose sleeve double as reinforcement Multiple mullion depths for various applications and spans Glass chairs offer superior glazing support and allow for larger glazing units Accomodates a variety of glass infills including single, double, and triple glazing. FINISHES Available in 7 standard anodized finishes Painted finishes in standard and custom colors Split finish options TECHNICAL SERVICES Wind Load & Dead Load Charts Thermal performance charts Design assistance and support OPTIONAL FEATURES Steel reinforcement Integrated entrance framing systems Compatible with Apex Vents and Doors apexfacades.com 1.2 Keystone Pg- 3

4 Reinforcing Options NO REINFORCEMENT EXTRUDED SLEEVE STEEL C-CHANNEL C3X5 C3x5 STL CHANNEL C4X5.4 C4x5.4 STL CHANNEL C5X6.7 C5x6.7 STL CHANNEL apexfacades.com 1.2 Keystone Pg- 4

5 Reinforcing Options NO REINFORCEMENT EXTRUDED SLEEVE STEEL C-CHANNEL C5x6.7 STL CHANNEL C5x6.7 STL CHANNEL apexfacades.com 1.2 Keystone Pg- 5

6 Reinforcing Options NO REINFORCEMENT EXTRUDED SLEEVE STEEL C-CHANNEL C3X5 STL CHANNEL C4X5.4 STL CHANNEL C5X6.7 STL CHANNEL apexfacades.com 1.2 Keystone Pg- 6

7 Reinforcing Options NO REINFORCEMENT EXTRUDED SLEEVE EXTRUDED SLEEVE + STEEL BAR "x3/8" STL BAR "x3/8" STL BAR apexfacades.com 1.2 Keystone Pg- 7

8 2 Sided Structural Glazing 2-SIDE STRUCTURAL VERTICAL GLAZING GRID ASSEMBLY apexfacades.com 1.2 Keystone Pg- 8

9 2 Sided Structural Glazing 2-SIDE STRUCTURAL HORIZONTAL GLAZING GRID ASSEMBLY apexfacades.com 1.2 Keystone Pg- 9

10 4 Sided Structural Glazing 4-SIDE STRUCTURAL GLAZING GRID ASSEMBLY apexfacades.com 1.2 Keystone Pg- 10

11 Fully Captured Glazing FULLY CAPTURED GLAZING ASSEMBLY apexfacades.com 1.2 Keystone Pg- 11

12 50, [2"] V1 H1 25,4 [1"] 152,4 [6"] 101,6 [4"] TYPICAL H A A 50,8 [2"] V1 FULLY CAPTURED GLAZING 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 12

13 ,8 [2"] V2 H2 101,6 [4"] ,4 [1"] 152,4 [6"] TYPICAL TYPICAL H TYPICAL TYPICAL ,7 [1/2"] A 50,8 [2"] V2 2-SIDE STRUCTURAL GLAZING 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 13

14 50,8 [2"] V3 H3 25,4 [1"] 152,4 [6"] 101,6 [4"] 12,7 [1/2"] H A A 50,8 [2"] V3 25,4 [1"] 152,4 [6"] 101,6 [4"] 2-SIDE STRUCTURAL GLAZING apexfacades.com 1.2 Keystone Pg- 14

15 50,8 [2"] V4 H4 101,6 [4"] 133,4 [5 1/4"] 25,4 [1"] ,7 [1/2"] H ,7 [1/2"] A 50,8 [2"] V4 4-SIDE STRUCTURAL GLAZING 25,4 [1"] 101,6 [4"] 133,4 [5 1/4"] apexfacades.com 1.2 Keystone Pg- 15

16 A 152,4 [6"] 25,4 [1"] 101,6 [4"] A H5 INTERMEDIATE ADJUSTIBLE BRACKET apexfacades.com 1.2 Keystone Pg- 16

17 50,8 [2"] V H6 50,8 [2"] 25,4 [1"] 152,4 [6"] 101,6 [4"] H A V6 FULLY CAPTURED GLAZING apexfacades.com 1.2 Keystone Pg ,4 [1"] 152,4 [6"] 101,6 [4"]

18 50, [2"] V H7 50,8 [2"] 25,4 [1"] 152,4 [6"] 101,6 [4"] H A ,7 [1/2"] V7 2-SIDE STRUCTURAL GLAZING apexfacades.com 1.2 Keystone Pg- 18

19 [2"] H8 V8 152,4 [6"] 133,3 [5 1/4"] 19 [3/4"] 6,4 [1/4"] 76,2 [3"] H V8 D.L.O. 50,8 [2"] 50,8 [2"] apexfacades.com 1.2 Keystone Pg- 19

20 [2"] H9 V9 76,2 [3"] 101,6 [4"] 152,4 [6"] 6,4 [1/4"] 19 [3/4"] 133,3 [5 1/4"] 6,4 [1/4"] H A 2-SIDE STRUCTURAL GLAZING GRID FOR 1/4" GLASS SPANDREL V D.L.O. 50,8 [2"] 50,8 [2"] apexfacades.com 1.2 Keystone Pg- 20

21 90 CORNER ISOMETRIC VIEW [ 2 "] 50, A 45 25,4 [1"] ,6 [4"] 133,4 [5 1/4"] 152,4 [6"] apexfacades.com 1.2 Keystone Pg- 21

22 ,8 [2"] V11 H11 25,4 [1"] 25,4 [1"] 152,4 [6"] H FULLY CAPTURED GLAZING MULLION-TRANSOM OPTIONS V11 25,4 [1"] 63,5 [2 1/2"] 152,4 [6"] apexfacades.com 1.2 Keystone Pg- 22

23 50,8 [2"] V H12 25,4 [1"] 101,6 [4"] 177,8 [7"] H A V12 FULLY CAPTURED GLAZING MULLION-TRANSOM OPTIONS 25,4 [1"] 101,6 [4"] 177,8 [7"] apexfacades.com 1.2 Keystone Pg- 23

24 50,8 [2"] VENT TO LATER DETAIL 50,8 [2"] 25,4 [1"] 95,2 [3 3/4"] 152,4 [6"] 101,6 [4"] 38,1 [1 1/2"] H13 H13 V13 16,5 [21/32"] 57,2 [2 1/4"] ,8 [2"] A V13 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 24

25 50,8 [2"] VENT TO LATER DETAIL 50,8 [2"] 25,4 [1"] 95,2 [3 3/4"] 133,4 [5 1/4"] 38,1 [1 1/2"] 101,6 [4"] H14 H14 V14 V14 57,2 [2 1/4"] ,8 [2"] A 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 25

26 50,8 [2"] ,8 [2"] H15 25,4 [1"] 38,1 [1 1/2"] 95,2 [3 3/4"] 133,4 [5 1/4"] 101,6 [4"] H15 V15 V15 57,2 [2 1/4"] ,8 [2"] A 25,4 [1"] 101,6 [4"] 133,4 [5 1/4"] apexfacades.com 1.2 Keystone Pg- 26

27 ,8 [2"] V16 H16 58 [2 9/32"] 44,5 [1 3/4"] 101,6 [4"] 171,5 [6 3/4"] TYPICAL TYPICAL TYPICAL H A V16 58,7 [2 5/16"] A FULLY CAPTURED GLAZING TRIPLE1 3/4" IGU 25,4 [1"] 171,5 [6 3/4"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 27

28 ,8 [2"] V17 H17 44,5 [1 3/4"] 101,6 [4"] 152,4 [6"] TYPICAL H A A 2-SIDE STRUCTURAL GLAZING TRIPLE 13 /4" IGU 44,4 [1 3/4"] 171,5 [6 3/4"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 28

29 50,8 [2"] V18 H18 101,6 [4"] 44,5 [1 3/4"] 171,5 [6 3/4"] 12,7 [1/2"] H A A 2-SIDE STRUCTURAL GLAZING TRIPLE 1 3/4" IGU 44,4 [1 3/4"] 171,5 [6 3/4"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 29

30 50,8 [2"] V19 H19 44,5 [1 3/4"] 152,4 [6"] 101,6 [4"] 12,7 [1/2"] H A 50,8 [2"] 4-SIDE STRUCTURAL GLAZING TRIPLE 1 3/4" IGU 44,4 [1 3/4"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Keystone Pg- 30

31 WIND LOAD / DEAD LOAD CHARTS apexfacades.com 1.2 Keystone Pg- 31

32 Wind Load Charts GENERAL NOTES WIND LOAD CHARTS 1. Deflection requirements comply with S157-05/S and AAMA TIR-A Deflection Limit - L/175. (Note: to convert to L/240 + ¼ deflection limit when H > 13.5 ft., multiply mullion spacing by k = /H, where H mullion height in ft.) 2. Mullion freely supported at ends. 3. All reinforcing shown in these charts considered that it is mechanically fastened to the aluminum extrusion. Fastening requirements to be reviewed and approved by Engineer. *Please contact your local sales representative if you wish to access the full Wind Load / Dead Load chart. DEAD LOAD CHARTS 1. Deflection requirements comply with S157-05/S and AAMA TIR-A Deflection Limit - 1/8. 2. Transom freely supported at ends with setting blocks at 1/4 or 1/8 of transom length or Glass unit - 6 mm / 6 mm. *Charts are based on deflection analysis only and considered for estimation purposes only. Designer has to take necessary steps to make appropriate engineering calculations as per applicable Building Codes and regulations for compelte design, i.e. stress, slenderness, local buckling SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 32

33 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 33

34 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in C3X5 SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 34

35 Wind Load Charts C3X5 DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 35

36 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 36

37 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in C4X5.4 SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 37

38 Wind Load Charts C4X5.4 DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 38

39 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 39

40 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in C5X6.7 SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 40

41 Wind Load Charts C5X6.7 DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 41

42 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 42

43 Wind Load Charts DOUBLE SPAN lxx = in 4 sxx = in C5X6.7 SINGLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 43

44 Wind Load Charts C5X6.7 DOUBLE SPAN lxx = in 4 sxx = in 3 apexfacades.com 1.2 Keystone Pg- 44

45 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 45

46 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 46

47 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 47

48 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 48

49 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 49

50 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 50

51 Dead Load Charts DOUBLE GLAZING lyy = in 4 syy = in TRIPLE GLAZING lyy = in 4 syy = in 3 apexfacades.com 1.2 Keystone Pg- 51

52 PARTS LIST apexfacades.com 1.2 Keystone Pg- 52

53 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 1" (51mm X 25mm) Mullion (Veneer) (3" [76mm] O.A. System Depth) Standard Length 289" (7341mm) lxx, in4: (mm4: 58,232) lyy, in4: (mm4: 103,787) " x 2.5" (51mm X 64mm) Mullion (4.5" [114mm] O.A. System Depth) Standard Length 289" (7341mm) lxx, in4: 1.22 (mm4: 508,548) lyy, in4: (mm4: 211,620) " x 4" (51 mm X 102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) lxx, in4: 3.71 (mm4: 1,546,079) lyy, in4: (mm4: 354,568) " x 5" (51mm X 127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) lxx, in4: 6.25 (mm4: 2,600,850) lyy, in4: 1.03 (mm4: 428,688) apexfacades.com 1.2 Keystone Pg- 53

54 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 6" (51mm X 152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 9.63 (mm4: 4,006,512) lyy, in4: 1.21 (mm4: 502,807) " x 7" (51 mm X 178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 19.3 (mm4: 8,051,013) lyy, in4: 1.54 (mm4: 640,379) apexfacades.com 1.2 Keystone Pg- 54

55 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 4" (51 mm X 102mm) Mullion SSG (6" [152mm] O.A. System Depth (2SSG) 5.25" [133mm] O.A. System Depth (4SSG)) Standard Length 289" (7341mm) lxx in4: 3.21 (mm4: 1,335,879) lyy, in4: (mm4: 366,694) " x 5" (51 mm X 127mm) Mullion SSG (7" [178mm] O.A. System Depth (2SSG) 6.25" [159mm] O.A. System Depth (4SSG)) Standard Length 289" (7341mm) lxx in4: 5.49 (mm4: 2,286,613) lyy, in4: 1.06 (mm4: 440,830) " x 6" (51 mm X 152mm) Mullion SSG (8" [203mm] O.A. System Depth (2SSG) 7.25" [184mm] O.A. System Depth (4SSG)) Standard Length 289" (7341mm) lxx in4: 8.57 (mm4: 3,566,395) lyy, in4: 1.24 (mm4: 514,965) apexfacades.com 1.2 Keystone Pg- 55

56 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 7" (51mm X 178mm) Mullion SSG (9" [229mm] O.A. System Depth (2SSG) 8.25" [210mm] O.A. System Depth (4SSG)) Standard Length 289" (7341mm) lxx in4: 16.3 (mm4: 6,769,562) lyy, in4: 1.54 (mm4: 641,457) apexfacades.com 1.2 Keystone Pg- 56

57 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 4" (51mm X 102mm) Split-Mullion, Male (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 1.36 (mm4: 565,252) lyy, in4: (mm4: 20,824) " x 4" (51mm X 102mm) Split-Mullion,Female (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 2.39 (mm4: 996,127) lyy, in4: (mm4: 66,030) " x 5" (51mm X 127mm) Split-Mullion, Male (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 4.04 (mm4: 1,679,853) lyy, in4: (mm4: 72,496) apexfacades.com 1.2 Keystone Pg- 57

58 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 5" (51mm X 127mm) Split-Mullion, Female (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 2.40 (mm4: 999,560) lyy, in4: (mm4: 22,027) " x 4" (51mm X 102mm) Transom (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 3.46 (mm4: 1,440,389) lyy, in4: (mm4: 377,205) " x 5" (51mm X 127mm) Transom (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 5.92 (mm4: 2,464,366) lyy, in4: 1.09 (mm4: 451,654) apexfacades.com 1.2 Keystone Pg- 58

59 Parts List PART # CROSS SECTION DESCRIPTION NOTES " x 4" (51 mm X 102mm) Transom SSG (6" O.A. system depth (2SSG)) Standard Length 289" (7341mm) lxx in4: 3.41 (mm4: 1,420,204) lyy, in4: (mm4: 401,285) " x 5" (51 mm X 127mm) Transom SSG (7" O.A System Depth (2SSG)) Standard Length 289" (7341mm) lxx in4: 5.88 (mm4: 2,447,846) lyy, in4: 1.14 (mm4: 475,405) apexfacades.com 1.2 Keystone Pg- 59

60 Parts List PART # CROSS SECTION DESCRIPTION NOTES Corner Mullion 2"x7" (51 mm X 178mm) (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 11.7 (mm4: 4,883,138) lyy, in4: 1.32 (mm4: 550,703) Corner Mullion 2"x8.3125" (51 mm X 211 mm) (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) lxx in4: 19.5 (mm4: 8,115,864) lyy, in4: 1.58 (mm4: 655,592) apexfacades.com 1.2 Keystone Pg- 60

61 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (89mm) Reinforcing Sleeve for 4" (102mm) Mullion Standard Length 289" (7341mm) Mill Finish lxx in4: 2.34 (mm4: 974,199) lyy, in4: (mm4: 293,628) " (114mm) Reinforcing Sleeve for 5" (127mm) Mullion Standard Length 289" (7341mm) Mill Finish lxx in4: 4.38 (mm4: 1,823,995) lyy, in4: (mm4: 350,377) " (140mm) Reinforcing Sleeve for 6" (152mm) Mullion Standard Length 289" (7341mm) Mill Finish lxx in4: 7.25 (mm4: 3,018,396) lyy, in4: (mm4: 407,126) apexfacades.com 1.2 Keystone Pg- 61

62 Parts List PART # CROSS SECTION DESCRIPTION NOTES Alignment Sleeve for 4" (102mm) Split- Mullion Standard Length 289" (7341mm) Mill Finish lxx in4: (mm4: 215,537) lyy, in4: (mm4: 1,255) Alignment Sleeve for 4" (102mm) Split- Mullion Standard Length 289" (7341mm) Mill Finish lxx in4: 1.15 (mm4: 479,142) lyy, in4: (mm4: 1,531) apexfacades.com 1.2 Keystone Pg- 62

63 Parts List PART # CROSS SECTION DESCRIPTION NOTES " (51mm) Pressure Plate - Regular Duty Standard Length 289" (7341mm) Mill Finish Prepunched with.275" (7mm) 8" (203mm) O.C " (51mm) Standard Cap (16mm) Height Standard Length 289" (7341mm) " (51mm) Corner Cap (16mm) Height Standard Length 289" (7341mm) Optional Jamb Adaptor for 1" (25mm) Glazing Standard Length 289" (7341mm) Glazing Adaptor for.25" (6mm) Glazing Standard Length 289" (7341mm) Perimeter Flange Adaptor Standard Length 289" (7341mm) Thermally improved profile apexfacades.com 1.2 Keystone Pg- 63

64 Parts List PART # CROSS SECTION DESCRIPTION NOTES Windload Bracket - Lineal lxx in4: 19.9 (mm4: 8,267,130) lyy, in4: 9.75 (mm4: 4,056,770) " (6mm) Serrated Washer - Lineal Dead Load Bracket - Lineal lxx in4: 16.8 (mm4: 6,990,216) lyy, in4: 5.25 (mm4: 2,185,854) Thermally Broken Door Adaptor, Regular lxx in4: 2.26 (mm4: 938,990) lyy, in4: (mm4: 128,921) Standard Length 144" (3658") Mill Finish 2" (51mm) sightline system Fabricated and punched to Customer Requirements Mill Finish Fabricated and punched to Customer Requirements Mill Finish Standard Length 262" (6655mm) Adaptor for use with Pinnacle 600/650 and /550 curtainwall with 1" glazing. Available in split finish Thermally Broken Door Adaptor, Wide lxx in4: 2.67 (mm4: 1,111,855) lyy, in4: (mm4: 261,230) Standard Length 262" (6655mm) Integrates door into Pinnacle 600/650 and /550 curtainwall with 1" glazing. Recommended for use with electric strikes. Available in split finish apexfacades.com 1.2 Keystone Pg- 64

65 Parts List PART # CROSS SECTION DESCRIPTION NOTES A 3.5" (89mm) Shear Block for 4" (102mm) Mullion A 4.5" (114mm) Shear Block for 5" (127mm) Mullion A 5.5" (140mm) Shear Block for 6" (152mm) Mullion A Shear Block for 1" (25mm) 'Veneer" Mullion A Setting Block Chair for 1" (25mm) Double IG Glazing, Captured Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes Standard Length 4" (102mm) Mill Finish.5" (12.5mm) Bite A Setting Block Chair for 1 3/4" (44.5mm) Triple IG Glazing, Captured Standard Length 4" (102mm) Mill Finish.5" (12.5mm) Bite apexfacades.com 1.2 Keystone Pg- 65

66 Parts List PART # CROSS SECTION DESCRIPTION NOTES A Setting Block Chair for 1" (25mm) Double IG Glazing, SSG Standard Length 4" (102mm) Mill Finish 0.5" (12.5mm) Bite A Setting Block Chair for 1 3/4" (44.5mm) Triple IG Glazing, SSG Standard Length 4" (102mm) Mill Finish 0.5" (12.5mm) Bite apexfacades.com 1.2 Keystone Pg- 66

67 Parts List PART # CROSS SECTION DESCRIPTION NOTES Efficiency Plus Thermal Break for 1" (25mm) Double IG Glazing Standard Length 288" (7315mm) Polyamide (PA 6.6), Black Efficiency Plus 3 Thermal Break for 1.75" (44.5mm) Triple IG Glazing Standard Length 288" (7315mm) Polyamide (PA 6.6), Black Jamb Adaptor Thermal Break Standard Length 288" (7315mm) Rigid PVC, Black apexfacades.com 1.2 Keystone Pg- 67

68 Parts List PART # CROSS SECTION DESCRIPTION NOTES #10-1 1/2" Pan Head Zinc-plated Self-tapping Screw, Robertson Drive #10-1/2" SS (18-8) Pan Head Zinc-plated Self-tapping Screw, Robertson Drive Shear block-to-mullion, mullion-to-transom attachment. Unit: 100 pcs. Mullion-to-transom attachment Unit: 100 pcs #10-7/8" ss (18-8) CSK Zinc-plated Self-tapping Screw, Robertson Drive / /2" Long SS (18-8) Pan Head, CA-Tip Screw, Robertson Drive / /16" Long SS (18-8) Pan Head, CA-Tip Screw, Robertson Drive Mullion-to-transom attachment (SSG) Attachment of Pressure Plate 1" (25mm) Double IG Unit Attachment of Pressure Plate 1 3/4" (44.5mm) Triple IG Unit apexfacades.com 1.2 Keystone Pg- 68

69 Parts List PART # CROSS SECTION DESCRIPTION MATERIAL/ DURO Captured Glazing interior Gasket COLOR UNIT EPDM/60 Black 200 ft. [61 m] (roll) Captured Glazing interior Gasket EPDM/60 Black 250 ft. [76m] (roll) or 4 SSG interior Gasket Silicone/70 Black 250 ft. [76m] (roll) High Performance 3-in-1 Exterior Glazing Gasket Standard Pressure Plate Gasket at Edges EPDM/70 Black 100 ft. [30m] (roll) EPDM/70 Black 250 ft. [76m] (roll) Standard Pressure Plate Gasket at Center EPDM/70 Black 250 ft. [76m] (roll) Main Seal Gasket (Split Mullion) Silicone/60 (Lubricated) Black 250 ft. [76m] (roll) or 4 SSG interior Gasket Silicone/70 Black ft /8"x1 1/8" (3mm X 28.5mm) Setting Block, 4" (102mm) Long, 1" Double Glazing /8"x1 3/4" (3mm X 44.5mm) Setting Block, 4" (102mm) Long, 1 3/4" Triple Glazing Pile Weatherstripping, 5/16" Height Silicone/80 Black pc. Silicone/80 Black pc. Grey ft High Performance THreshold Bulb Seal TPE/60 Black 500ft. [152m] (roll) apexfacades.com 1.2 Keystone Pg- 69