It s not magic, it s engineering. Impact and Airborne Sound Control. GenieClip. US Patent No. 7,895,803 U.K. VERSION

Transcription

1 It s not magic, it s engineering. Impact and Airborne Sound Control US Patent No. 7,895,803 U.K. VESION

2 An innovative, and reliable sound solution Engineered for superior acoustical performance in reducing the transmission of airborne and impact sound through all and floor/ceiling assemblies. The is a unibody molded rubber and galvanized steel mount used to attach plasterboard to either all or floor/ceiling assemblies. Made from recycled components, and engineered to allo reduction in assembly eight, the contributes to LEED certified building. For donloads, visit pliteq.com Here s hat s available on our ebsite: 40 UL certifications Over 150 independent laboratory and field test reports Installation instructions Complete laboratory test reports and field data Technical papers Performance comparisons Cost analysis Case studies Private ebsite for engineers LEED information and carbon footprint analysis Technical binder request Local Sales support in U.S., U.K., Canada, Middle East and Southeast Asia About Us Pliteq is an engineering company dedicated to providing creative solutions to structural, vibration, and sound control problems using recycled materials. Using elastomer technology and intellectual property, high performance solutions are researched, developed and rigorously tested for the engineer. It s not magic, it s engineering. 2 pliteq

3 Engineered to ork The is easy and fast to install using standard steel furring bar and is extremely stable hen held in place ith a single fastener. There is nothing to adjust or site fit. The furring bar is simply snapped into the and the plasterboard can be immediately installed. Only one scre required to attach metal clip to timber or metal all studs or floor joists Engage standard 25 gauge plasterboard furring bar into either cla, then squeeze bar to engage the cla Engineered to be foolproof vs /8" mm esilient Bar esilient bar is commonly short circuited esilient Bar Crushed is impossible to short circuit Engineered to improve transmission loss Lo Frequency Performance Timber Truss IIC Comparison 1 layer of plasterboard on each side Genieclip 3

4 Floor-Ceiling Assemblies open-eb timber trusses Timber Truss ith and Screed 12mm 457mm Open-Web Timber Truss 549mm : L n, 54, 54 (no underlayment): L n, 58, 54 2mm (no underlayment) 2mm 18mm Screed 18mm O.S.B b Ln, c, g L521, L528, etc. Timber Truss ith and NO Screed 457mm Open-Web Timber Truss 546mm Wood: L n, 56, 53 : L n, 51, 53 (no underlayment): L n, 60, 53 12mm Wood 12mm 2mm (no underlayment) 2mm Optional Second Layer 18mm T&G Plyood (2) Layers of e Ln, b, d, v L521, L528, etc. 4 pliteq

5 Floor-Ceiling Assemblies engineered joists TJI Floor Joist ith and Screed 12mm Wood 305mm TJI 406mm Floor Joist 12mm 2mm 2mm 18mm Screed 18mm T&G Plyood c Ln, h, 1i, 1j (2) Layers of 12mm Plasterboard L518, L547, L570, L589 Wood: L n, 53, 54 : L n, 57, 54 : L n, 58, 54 TJI Floor Joist ith and NO Screed 12mm Wood 12mm 2mm 2mm (no underlayment) 2mm a 305mm TJI Floor Joist 406mm (2) Layers of 18mm O.S.B. (2) Layers of 12mm Plasterboard Ln, b, 1c, 1d, 1e L518, L547, L570, L589 Wood: L n, 54, 53 : L n, 53, 53 : L n, 57, 53 (no underlayment): L n, 59, 53 Genieclip 5

6 Floor-Ceiling Assemblies concrete slabs CSOC-1 Suspension System Pliteq has several standard ceiling suspension accessories and our engineers design custom applications 200mm 102mm 610mm max OC 12mm 5mm ST mm Concrete Slab CSOC-1 62 NGC Gas Pin Shot 19mm Threaded Bracket (6mm dia. clearance) 6mm x 50mm x 20Ga Threaded od 55 L n, NGC Nyloc Anti-Vibration Nut ith Washer 22mm CSOC-2 Suspension System 150mm 305mm 150mm Concrete Slab CSOC-2 12Ga Wire Hanger Plasterboard Grid PLAN VIEW Main Tees: East-West Cross Tees: North-South 610mm OC 66 NGC L n, NGC pliteq

7 Floor-Ceiling Assemblies composite floor systems Hambro D500 With 100mm Normal Weight Concrete and Hambro D500 Composite Floor Joist 165mm Fiberglass Batt Insulation Hambro D500 Composite Floor Joist 165mm Fiberglass Batt Insulation 12mm 2mm 100mm Concrete Slab 12mm einforcing Mesh 2mm 62 Integrated Top Chord 100mm Concrete Slab einforcing Mesh Integrated Top Chord NGC L NGC n, Cup Washer and Nut Bolt Bottom Chord Cup Washer and Nut Bolt 610mm max OC 610mm max OC NGC L n, NGC G524 22mm Bottom Chord 12mm Plasterboard G524 22mm 12mm Plasterboard Epicore MS Decking ith 140mm Normal Weight Concrete and 813mm Epicore MS Floor Pan 406mm OC 813mm Epicore MS Floor Pan 406mm OC Gas Pin Shot 19mm Threaded Bracket (6mm dia. clearance) 6mm Gas Pin x 50mm Shot x 20Ga Threaded od 19mm Nyloc Anti-Vibration Threaded Bracket Nut (6mm ith Washer dia. clearance) 6mm x 50mm x 20Ga Threaded od Nyloc 22mm Anti-Vibration Nut ith Washer 22mm 12mm 2mm 140mm Concrete Slab 12mm 22Ga Epicore MS Composite Floor Deck System 2mm 140mm Concrete Slab CSOC-1 22Ga Epicore MS 12mm Plasterboard Composite Floor Deck System CSOC-1 12mm Plasterboard 56 NGC L NGC n, NGC L n, NGC D938 D938 Genieclip 7

8 Wall Assemblies metal stud ith 2 layers ith 3 layers ith 4 layers 22mm 25Ga 22mm Plasterboard 22mm 22mm 25Ga 90mm Furring Furring Batt Bar 90mm Insulation Batt Bar Insulation 90mm 90mm Metal Batt Stud Metal Batt Insulation Stud Single 90mm 90mm Layer Metal Single 90mm Metal of Stud Layer Metal Studof Stud Single Single Layer Layer of Single 15mm 15mm Layer Plasterboard Single 15mm oflayer Plasterboard of Single Single Layer Layer of 15mm TL TL U419, U423 U419, U mm 161mm TL TL TL U419, U419, U423 U419, U423 U mm 161mm 161mm 22mm 22mm 25Ga Furring Bar 22mm 22mm 25Ga 90mm Furring 90mm Furring Batt Bar Furring Batt Bar Insulation Bar 90mm 90mm Metal Batt 90mm Metal Batt Insulation Stud Batt Stud Insulation Single 90mm Single 90mm Layer Metal 90mm Layer Metal of Stud Metal of Stud Stud 15mm Single Single Layer Layer of Double 15mm Double Layer 15mm Layer of Plasterboard of 15mm Double Double Layer Double Layer oflayer of 15mm TL U419, U419, U423 U mm 176mm TL TL TL U419, U419, U423 U419, U423 U mm 176mm 176mm 22mm 22mm 25Ga 90mm Furring Furring Batt Bar Insulation Bar 90mm 90mm Metal Batt Stud Batt Insulation Double 90mm 90mm Metal Layer 90mm Metal Stud of Metal Stud Stud Double Double Layer Double Layer oflayer of Double 15mm Layer 15mm of Plasterboard Double Double Layer Double Layer oflayer of 15mm TL U419, U mm TL TL TL U419, U419, U423 U419, U423 U mm 191mm 191mm timber stud ith 2 layers ith 3 layers ith 4 layers 22mm 25Ga Plasterboard 22mm 25Ga Plasterboard 22mm 22mm 25Ga 90mm Furring Furring Batt Bar Insulation Bar 50 90mm x 90mm 100mm Batt Timber Batt Insulation Stud Single 50 x mm Layer x mm x of Timber 100mm Timber Stud Timber Stud Stud Single Single Layer Layer of Single 15mm 15mm Layer Plasterboard 15mm of Plasterboard Single Single Layer Layer of 15mm TL U mm TL TL TL U305 U305 U mm 161mm 161mm 22mm 22mm 25Ga Furring Bar 22mm 22mm 25Ga 90mm Furring 90mm Furring Batt Bar Furring Batt Bar Insulation Bar 50 90mm x 50 90mm 100mm x Batt 100mm Timber Batt Timber Insulation Stud Stud Single 50 x Single mm Layer x mm Layer x of Timber 100mm of Timber Stud Timber Stud Stud 15mm Single Single Layer Layer of Double 15mm Double Layer 15mm Layer of Plasterboard of 15mm Double Double Layer Double Layer oflayer of 15mm TL U305 U mm 176mm TL TL TL U305 U305 U mm 176mm 176mm 22mm 22mm 25Ga 90mm Furring Furring Batt Bar Insulation Bar 50 90mm x 90mm 100mm Batt Timber Batt Insulation Stud Double 50 x mm x Layer mm x 100mm oftimber Stud Timber Stud Stud Double Double Layer Double Layer oflayer of Double 15mm Layer 15mm of Plasterboard Double Double Layer Double Layer oflayer of 15mm TL U mm TL TL TL U305 U305 U mm 191mm 191mm 8 pliteq

9 Wall Assemblies engineered partitions save material NEW WAY ith OLD WAY ith 4 layers 90mm Metal Stud 90mm Metal Stud 610mm OC 610mm OC Double Double Layer Layer of of 15mm Double Double Layer Layer of of 15mm mm U419, U423 TL UL U419, U419, U423 U mm TL TL Eliminate 2 layers of plasterboard to: Achieve 7dB improvement educe amount of construction materials save space NEW WAY ith 50 x 100mm Timber Furring Stud Bar 50 x 100mm Timber Stud Double Layer of Double Layer of mm OC mm OC OLD WAY ith Staggered or Double Studs (metal or timber) 50 x 100mm Timber Stud 50 x 100mm Timber Stud Double Layer of Double Layer of Double Layer of Double Layer of TL TL mm U305 U340 U mm 239mm U305 TL U340 TL mm 218mm 239mm mm OC mm OC and 90mm Batt 15mm Insulation Plasterboard Double o of 50 x 100mm Timber Stud and 61 U TL Eliminate 1 ro of framing and insulation to: Achieve similar acoustical performance educe partition thickness by 60mm Increase valuable floor space Avoid ineffective staggered stud assemblies Genieclip 9

10 etrofit Assemblies Benefits Increase L n, by 8-12 db in floor ceiling retrofit assemblies Increase by db in all retrofit assemblies etrofit directly to existing ceiling or all Greater than other popular retrofit solutions Floor-Ceiling Assembly Wall Assembly 6mm cut around perimeter Subfloor Timber Floor Joist esilient Bar Option (See NOTE) 50mm Batt Insulation 6mm esilient Fire-ated Acoustical Caulking Timber Stud esilient Bar Option (See NOTE) 50mm Batt Insulation 6mm esilient Fire-ated Acoustical Caulking 6mm cut around perimeter etrofit increases 4-6dB, L 8-12dB etrofit increases 12-18dB n, NOTE: esilient bar failure is a common observation by Acoustical Engineers. Short circuited resilient bar results in up to a 10 STC point reduction. LoVerde, J., & Dong, W. (2009). Quantitative comparisons of resilient channel designs and installation methods. The is proven to: Meet building codes for fire and sound Prevent costly litigation and reconstruction IMPOTANCE OF ENGINEEED ELASTOMEr Framing Member Durometer Dynamic Stiffness * N/mm 55 C-Deluxe No ubber No ubber 49 * 50x100mm Timber stud 406mm OC, 1 layer of Plasterboard on each side ith 90mm Insulation ** Test conducted ith 140mm Insulation 10 pliteq

11 Test esults *Complete laboratory reports available. Floor-Ceiling assemblies Test No. Floor Structure Finish Floor esilient Matting Ceiling Description L n, d c Pliteq (1) 15mm Type C b g Pliteq (1) 15mm Type C f e Pliteq (2) 15mm Type C i h Pliteq (2) 15mm Type C s Wood Pliteq (2) 15mm Type C e f Pliteq (1) 15mm Type C c d Pliteq (2) 15mm Type C u v Pliteq (2) 15mm Type C k l, (1) 15mm Type C i j Pliteq (1) 15mm Type C a b Pliteq a c Wood Pliteq a d Pliteq a e Pliteq c g Pliteq c h Wood Pliteq c i Pliteq c j Pliteq c k esilient Bar mm concrete slab -CSOC-2 (1) 15mm Type C mm concrete slab Dietrich C-1, (1) 12mm Type X mm concrete slab ST-05 Pliteq (1) 15mm Type X mm concrete slab ST-10 Pliteq (1) 15mm Type X Epicore MS Decking ith 140mm concrete Pliteq (1) 15mm Type X Hambro D500 ith 100mm concrete Pliteq (1) 12mm Type C Genieclip 11

12 *Complete laboratory reports available. WALL ASSEMBLIES Test No. Wall Stud Structure Plasterboard Layers Steel Framing Member Hz Hz Metal 20 Ga., 90mm idth spaced 610mm OC 15mm Type X Product Type db db db Metal Metal Metal 1 1 C-Deluxe Metal Metal 2 1 C-Deluxe Metal Metal Metal 2 2 C-Deluxe Metal Metal Metal Metal Timber mm spaced 406mm OC 15mm Type X Product Type db db db Timber Timber Timber 1 1 C-Deluxe Timber Timber Timber 2 1 C-Deluxe Timber Timber Timber 2 2 C-Deluxe Timber Timber layer Timber layers Double Stud 1x Staggered Stud 2x Contact us For more information: Pliteq (UK) Limited Compass House, Vision Park Chivers Way, Histon Cambridge UK CB24 9AD Tel Fax pliteq.com The information provided in this brochure is accurate to the best of our knoledge at the time of printing. Hoever, e reserve the right to make changes hen necessary ithout notification. PINTED IN 2011