Laboratory Systems. A safe choice. Furniture systems, supplementary equipment and services

Transcription

1 Furniture systems, supplementary equipment and services System 10 System 11 System 14 System 16 VisionLab WingLab Workstation x x x x x x Service bridge / spine x x x x x x Ergonomic design x x x x x x Work light x x x x x x Top / underbench cabinets x x x x x x Safety cabinet x x x x x x Chemical cabinet x x x x x x Balance table x x x x x x Height-adjustable table x x x x Fume hood x x x x x x LAF bench x x x x x x Service x x x x x x Financing x x x x x x The products presented above are just some of the products available in each furniture system. We can also design and deliver customised products. Labflex A/S is one of Europe s leading suppliers of innovative customized inventory solutions to industrial and university laboratories and to the research and hospital sector. Labflex offers consulting, project planning, concept development, project management and a wide, well-documented product range as well as installation, service and financing. Further information: Laboratory Systems A safe choice HEAD OFFICE, COPENHAGEN Labflex A/S Marielundvej 45 A DK Herlev DENMARK Labflex A/S Hjortevej 3 DK Skive DENMARK Labflex A/S True Møllevej 5 DK Tilst NORWAY Labflex Norway AS Skullerud Næringspark Olaf Helsets vei 5 N Oslo UNITED KINGDOM Labflex Limited Pegasus Business Park Castle Donington UK - DE74 2TZ USA Labflex Inc Passport Way Cary, NC North Carolina P P P P P +44 (0) P

2 Future-proof laboratories Furniture systems Needs and working procedures vary and change all the time in a laboratory. Many different users have many diverse work tasks. This places significant requirements on the layout, flexibility and durability of the furniture and equipment that is installed in the laboratory. Labflex is capable of meeting most of these needs with its wide standard range of furniture systems Labflex has built up unique competence in the consulting, production and delivery of both optimum and customised furnishing solutions and furniture systems over the years. This means that Labflex now offer a wide, optimised and relevant product range to all types of laboratories. The products can also be customised to specific user needs. Labflex has managed to integrate its knowledge and experience amassed over the last 50 years into a wide furnishing range. The solutions offered by Labflex ensure the future proofing of your laboratory. Labflex can offer a wide series of different furniture systems to your laboratory. The systems are different in both function and appearance. The design is timeless and developed with due considerations for function, ergonomics, hygiene, flexibility, strength and environment. The products are developed by Labflex s own experts in close cooperation with architects, engineers and laboratory users. Labflex can offer the following standard furniture systems: VisionLab WingLab System 10 System 11 System 14 System 16 COVERS ALL CLASSIFICATIONS The classification of the laboratory is decisive for the selection of the final solution, as well as for the final construction, design and material selection. Labflex is specialised, e.g. in furnishing GMO and microbiological laboratories, sterile rooms and personnel air locks. Labflex s systems can therefore accommodate all needs and requirements that exist for this type of special laboratories. It is Labflex s area of specialisation to provide the right consulting about both furnishing and specific product and material selection. The final solution may comprise a standard system or a specially designed and produced customerspecific solution. USER INNOVATION Labflex s furniture systems are based on user innovation. They are all developed and optimised in close cooperation with professional laboratory users. Such a development process focuses on working procedures, lighting, room limitations, furniture and equipment, ergonomics, service life, environment, flexibility, etc. All customers benefit from this approach we apply in the development of our furniture systems. It ensures that the construction, design and functionality are relevant, contemporary and durable. Labflex s analysis and design process is an important element in the future proofing of a laboratory. OPTIONAL SUPPLEMENTARY PRODUCTS All workstations can be delivered with supple-mentary products such as, for example, fume cupboards, LAF benches, fume enclosures, fume extractors, microscope tables, balance tables and supports for balance stone, as well as chemical, medicine and conventional storage cabinets. Labflex offers complete solutions to your laboratory. SPECIAL SOLUTIONS If Labflex s standard systems are not sufficient for meeting the customer s requirements, Labflex can offer customised solutions. These special solutions ensure 100% adaptation to actual user and building requirements. Labflex s team of engineers and architects will identify and analyse your needs in and around the laboratory and will subsequently develop the optimum laboratory solution for you. 2 3

3 VisionLab WingLab VisionLab is developed together WingLab is a furniture system for with professional users. It is a the dynamic laboratory where free-standing system which flexibility and sufficient floor does not need to be bolted to space is essential for creating the floor. The design creates an good work procedures. The optimum working environment system is built around a service where they key words are ef- bridge which is suspended from ficiency, lighting conditions and the ceiling. The service bridge presence in the laboratory. All has a unique design and a con- imaginable functions are inte- struction that allows clearance of grated into VisionLab, which also more than 4 metres. The service explains the good reception the bridge allows free integration of system has had on the market, as well as power & data outlets in the Free-standing setup Wall-mounted setup Free-standing and wall-mounted system Unique design Movable system. Can be turned and moved without any tools Self-supporting units which can be installed anywhere Focus on optimum work processes and environment Provides optimum and comfortable lighting conditions in the laboratory Can be classified in all types of laboratory standards surface contrasts Optimum ergonomics Free horizontal movement of the underbench cabinets without any tools Service-friendly portal which allows the integration of all connections in the same place Optional manual or electric height adjustment Option for integration and free placement of wet & dry service outlets on the portal or spine panel Standard modules: 3,000 mm to 3,600 mm. same place. The installation of storage cabinets is also possible Ceiling-suspended system Free-standing and wall-mounted system The Dance Floor provides flexible and mobile workstations Quick readjustment Plug-n-Play system Specially designed service bridge with a big load-carrying capacity and ideal work conditions Very stable system Good lighting solution (optional) surface transitions Available with fixed or mobile under bench Standard modules: 900 mm to 5400 mm

4 System 10 System 11 System 10 is a simple but very functional furniture system. The system stands free on the floor and is available for both island and wall setup. The unique structure makes it a strong system which is easy to install. The design is so practical that the system can be delivered as a knock-down kit and be System 11 is one of the most popular systems in United Kingdom and is also sold worldwide. It is a functionally strong and flexible system. The structure and design enable easy installation. The system is widely used in large projects where there is a need for a large number of interconnected laboratory systems assembled by the customer s own technicians. This has made System 10 a preferred choice, in particular, for laboratories on oil rig platforms, ships and other areas with difficult accessibility Easy installation Free-standing or bolted to the floor Available in wall-to-wall dimensions Easy to integrate with other furniture systems No supporting legs, which provides Island setup Wall setup Mobile system with a high degree of flexibility Big load-carrying capacity. Good system for heavy equipment. Can be delivered unassembled, i.e. in a knock-down state Easy assembly/disassembly Provides an M&E zone for pipes & cables. An alternatively use a service bridge surface transitions Free horizontal movement of the underbench units without any tools Adjustable height (optional) Standard modules: 900 mm, 1200 mm, 1500 mm and 1800 mm. good and flexible layout of the workplace Cleaning-friendly Available with or without a service bridge Provides a large M&E service zone for pipes & cables Removable panel for access to service zone Frewe horizontal movement of the underbench units without any tools Adjustable height (optional) Standard modules: NA sold by the metre. Island setup Wall setup 6 7

5 System 14 System 16 System 14 is developed to allow System 16 is a stationary system installation without any supporting legs which, in turn, makes it extra cabinet height. Top on low plinths, which provides a very cleaning-friendly furniture cabinets are available in two system. The system is very flexible as the worktops are height- cables are installed in the service heights. Pipes and electrical adjustable. The underbench bridge or behind the units in a units can also be freely moved dedicated service zone. The rear horizontally without any tools. service panel of all System 16 The service bridge can be fitted units can be removed without with sockets and taps which can any tools. This provides easy be placed freely along the whole access to the installations length of the bridge. The semicircular end sink unit with sliding doors facilitates user work in the Stationary system on low plinth laboratory, offers easy access to Fixed the sink and adds a nice finishing Extra storage space touch to the design of the setup Maximum cabinet height Connections in the service bridge, behind or between the worktops Easily detachable rear service panel ensuring easy servicing of Can be classified in different types connections of laboratory standards The rear service panel can be Free-standing and wall-mounted removed without any tools. system Easy access to installations between No supporting legs and cleaningfriendly units in island or wall setups. Available with fixed or mobile underbench Optimum ergonomic design Unique and characteristic design which, among other things, ensures easy access to washing Option for manual or electric height adjustment 356 mm, 457 mm, 543 mm, 657 mm, Island setup Wall setup Detachable, height-adjustable Island setup Wall setup 743 mm, 914 mm, 1,043 mm and modular worktop system 1,312 mm. surface transitions Free horizontal movement of the underbench units without any tools Adjustable height (optional) Standard dimensions: 900 mm, 1200 mm, 1500 mm and 1800 mm. 8 9

6 Cabinets, components and materials Quality all the way through MATERIALS Som udgangspunkt anvendes laminat og Standard materials include compact laminate and stainless steel (316). Combinations with wood, etc. are possible. Worktops are available in all kinds of materials and dimensions. All Labflex systems can accommodate all laboratory work situations and needs and meet the basic work safety and working environment requirements. TAPS, SERVICE BRIDGES AND CONNECTIONS Labflex offers a wide range of taps which meet all safety requirements and also have a high functionality. Labflex has strategic cooperation with BROEN which ensures that the customer gets the best consulting and optimum customer service. Service bridges and service chases are designed and delivered in accordance with the local conditions and user needs. The connections are customised and can usually be installed subsequently, where necessary. All connections are fitted in such a way as to be separate and meet the applicable legal requirements. All connections can be delivered with the final fix pipework installation. SERVICE BRIDGES Service bridges are supplied with electrical trunking in anodised aluminium. Internet sockets, telephone points and power sockets are easy to install in the detachable front panel. There is space for water and gas pipes, etc. behind and between the individual modules. Connections are placed in compliance with the safety requirements. Taps are installed under the bridge. The bridge can be supplied with an integrated lighting fixture. SERVICE SPINES Service spines are available in various lengths to maximise the utilisation of the room s dimensions. The panels are 200 mm or 300 mm deep and are available in different heights. Spine ends are closed with cover plates and can be fitted with power sockets in top front panel, taps in the top plate, as well internal piping and wiring. The front panel is easily detachable. The base plate is supplied in waterresistant laminated plywood. The service spines need to be fastened to the floor with the exception of VisionLab which is also available as a free-standing system. STEEL COMPONENTS All steel components are manufactured in steel grade 037 DIN 2395A and powder coated with coating thickness of at least 80 μ. This surface is resistant to the different chemicals that are most commonly used in laboratories. The steel for tables and storage unit plinths is made of 35 x 35 mm steel tube. Each steel supporting leg is fitted with adjustable levelling feet with steel thread. Reagent shelves are made of 25 x 25 mm steel tube. CARCASE The carcase is made in 19 mm white 100 gramme melamine-coated chipboard and 6 mm back panel. Carcase parts are fitted with rounded PP edging. All front edges of the cabinets have a dust seal to prevent dust from penetrating into the cabinet. The cabinets are assembled with glue and dowels. Standard poison and chemical cabinets are supplied with an extract spigot and with the bottom drawn for air intake. Underbench cabinets for fume cupboards are supplied with an extract spigot in the back and with the bottom drawn for air intake. DOORS Carcases can be supplied with different door types. A specific handle and hinge in high quality has been designed for each door. All door types are available with glass windows. Certain cabinet models are also available with roller shutters. The most sold door concept is Omega. The door model is characterised by angular corners and a 160 mm horizontal handle in zamak with a matt chrome finish. The door is pre-lipped with 3 mm PP or ABS plastic edging and coated with laminate on both sides. Hinges are self-closing, visible from the outside and have an opening angle of 270 degrees. All door types have a field on the handle which can identify the cabinet s content or placement using a code or a name. BENCHTOPS Depending on the laboratory and working environment where the worktops will be situated and the quality required, Labflex can offer worktops in different materials. Worktops are available in laminate, polypropylene, epoxy, stainless steel, compact laminate and ceramic material. The worktops have different qualities and chemical resistance. The worktops comply with DS/EN SHELVES Shelves are supplied in 19 mm 100 gramme melamine. The shelves have a big load-carrying capacity and can have additional support, where necessary. The shelves are mobile and have a surface quality which meets the requirements of DIN DRAWERS Drawers are detachable and tolerate high loads (35 kg per drawer). The drawers can be offered with a soft-close mechanism and a push-open function. The standard extension is 80%. WARRANTY AND QUALITY Labflex s products are supplied with product and reorder warranty. It is Labflex s desire to supply product solutions in high quality. PRODUCT AND REORDER WARRANTY