T-60 Shoring Robust shoring

Transcription

1 T-60 Shoring Robust shoring // Fast assembled heavy-duty falsework // Table of content Features Benefits Solutions Basic components

2 // Features Solution for shoring requirements in Building Construction and Civil Engineering. Shoring towers consisting of frames and vertical braces. Working load per leg up to 70 kn depending on configurations and tower height. Standard heights up to 12 m, special up to 20 m. Frames: 1 m high. Adjustment: with spindles and 35 cm frame. Certified product. Module sizes of towers: 1 m; 1.5 m; 2 m. System components: 1 Bottom Screw Jack 2 Frame Spacer Horizontal Brace 4 Frame 1 m 5 Vertical Brace 1 m Frame 0.35 m 7 Vertical Brace 0.35 m 8 Top Screw Jack 5 9 Head

3 // Benefits Quick assembly and dismantling with frames. Reduced number of items; easy erection. Sturdy and long-lasting (hot-dip galvanised coating). Towers can be relocated by crane. Assembly on ground and lifting to its site of operation. Erection of independent, chain-linked or reinforced towers possible. Ensured safety for workers throughout the assembly process; suits the use of platforms and access ladders. Relocation of sets with trolleys. High safety standards for the worker. Erection of vertical towers with platforms and ladders Horizontal assembly of towers and subsequent erecting with crane 3

4 // Solutions Configurations Individual tower Chain-linked tower Reinforced tower Tower with pedestrian bridge Tower with safety railing 4

5 Support of different types of projects Bridge deck Non-residential construction Tunnels Support of different formwork systems Table VR ENKOFORM HMK - ENKOFORM H-120 5

6 ENKOFLEX BTM Shifting and lifting Forward-moving of falsework with wheels on rails With Lateral Trolley VR Support of variable height formwork With crane 6

7 Basic components kg kg kg Frame 1x Frame 1.5x Frame 2x Bottom screw jack Bottom screw jack T-60 side bracket Frame 1x Frame 1.5x Frame 2x Header frame 1x Header frame 1.5x Header frame 2x Top screw jack Top screw jack Bracing 48/60 Right angle coupler Right angle coupler 48/ Swivel coupler 48/ Frame spacer 1x Frame spacer 1.5x Frame spacer 2x Two-way u-head VM-DU Tube 48 (from 0.5 m to 6 m) Double head VR Shifting elements Lateral trolley VR Vertical brace Vertical brace 1.5x Vertical brace Vertical brace 1x Vertical brace 1.5x Vertical brace 2x Two way U head BTM Top plate Tower movement hook Horizontal brace Horizontal brace Horizontal brace Horizontal brace Horizontal brace Horizontal brace Pivot U head Jack with wheel 250/1400 Kg

8 ULMA C y E, S. Coop. Ps. Otadui, 3 - P.O Oñati, Spain T F FDK02 IMPORTANT: Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in this document, and the data on stress and loads should be respected. ULMA s Technical Department must be consulted anytime that field changes alter our equipment installation drawings. The loads featured in this document, related to the basic elements of the product, are approximate. Our equipment is designed to work with accessories and elements made by our company only. Combining such equipment with other systems is not only dangerous but also voids any or all our warrantees. The company reserves the right to introduce any modifications deemed necessary for the technical development of the product. All rights reserved. Neither all nor part of this document may be reproduced or transmitted in any way by any electronic or mechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval system without the written permission. Copyright by ULMA C y E, S. Coop