Ev erguard Adhesiv es Guid e. Updated: 3/ 17

Transcription

1 Ev erguard Adhesiv es Guid e Updated: 3/ 17

2 INSULATION ADHESIVES is a two-component polyurethane low-rise foam adhesive used to adhere a variety of board stocks to most roof substrates or other insulation boards. Supplied in a bag-in-box for use with the PaceCart 2 application equipment. No thermal shorts caused by fasteners. Chemical cure results in faster set-up time. No pre-drilling into concrete. Rapid application and strengthens system. Helps to reduce reroo ng and construction noise. Lightweight and portable. Contains no HCFCs and has low VOCs. Spot Shot (28-oz. tube) is a two-component polyurethane low-rise foam adhesive used to adhere a variety of board stocks to most roof substrates or other insulation boards. The tube set comes in a disposable cartridge to be used with the Spot Shot Application Gun. No thermal shorts caused by fasteners. Chemical cure results in faster set-up time. No pre-drilling into concrete. Rapid application and strengthens system. Helps to reduce reroo ng and construction noise. Great for repair work and small areas. Stand-up application reduces worker fatigue while increasing production. M is a two-part, VOC-free, fast-set polyurethane foam adhesive used for single-ply eece-back membranes, most insulation, and substrates. This adhesive is applied on the substrate only. Low-rise foam that accommodates minor surface irregularities. Solvent free, VOC free, and low odor. GAF TPO M Low Temp is a two-component, VOC-free, low-rise polyurethane foam adhesive that contains no solvents and can be used to adhere both insulation boards and TPO eece-back membrane in temperatures ranging from 25 F (-3.9 C) to 60 F (15.6 C). Low rise foam that accommodates minor surface irregularities. Solvent free, VOC free, and low odor. GAF 2-Part Roo ng is a low-rise two-component polyurethane adhesive designed to adhere a variety of insulation board stock to various roof base substrates in both new and reroof applications. Self contained, ready to use. Ef cient in tight as well as open areas. One kit = up to 20 squares. No expensive spray equipment. No external power required. Fast installation. Portable and user friendly.

3 SINGLE-PLY ADHESIVES Low VOC is a contact-type bonding adhesive specially designed for bonding single-ply TPO roo ng membranes and ashings to various roo ng substrates. Low VOC (<250 g/ L). Approximately 6 square coverage per 5-gallon container. TPO 3 Square Low VOC Bonding is a contact-type bonding adhesive specially designed for bonding single-ply TPO roo ng membranes and ashing to various roof substrates. Low VOC (<250 g/ L). Approximately 3 square coverage per 5-gallon container. Solvent Based SBA 1121 is a solvent-based rubberized adhesive designed for use with TPO-based membranes. Fast-drying solvent system. Easy application using roller, brush, or spray. PVC Bonding is a contact-type bonding adhesive specially designed for bonding PVC single-ply roo ng membranes and ashings to various roo ng substrates. Low VOC < 250 g/ L. Fast-drying solvent system. Easy application using roller or brush. High initial tack. WB181 is a water-based adhesive designed for bonding both smooth and eece-back TPO roo ng membranes to various substrates. Compatible with concrete, masonry, metal, and wood ashing substrates. O is a two-part polyurethane foam adhesive used for single-ply eece-back membranes. This adhesive is applied on the substrate only. Low-rise foam that accommodates minor surface irregularities. Solvent free, low VOC, and low odor. GAF 2-Part Roo ng is a low-rise two-component polyurethane adhesive speci cally designed to adhere a variety of insulation board stock to various roof base substrates in both new and reroof applications. Self contained, ready to use. Ef cient in tight as well as open areas. One kit = up to 20 squares. No expensive spray equipment. No external power required. Fast installation. Portable and user friendly.

4 INSULATION ADHESIVES Spot Shot M M Low Temp O GAF 2-Part Roo ng Coverage Rate dispensed through the PaceCart 2 are squares per 10-gallon bag-in-box sets Spot Shot dispensed through applicators is 4 6 squares (4 sets of 1500-ml cartridges) ¾" 1" max 12" o.c sq. ft sq. ft./ sq. ft./ sq. ft sq. ft./ sq. ft. (2.5 bead, 12" on center rows) VOC <5 g/ L <5 g/ L 0 g/ L 0 g/ L 32 g/ L A-Component = 67.5 g/ L B-Component = 67.5 g/ L Quantity/ Size 10-gallon bag-inbox sets for use with the PaceCart 2 (5-gallon Part 1; 5-gallon Part 2) 4 sets of 1500-ml cartridges A-Component = 12 Boxes B-Component = 12 Boxes Weight Part 1 = 53 lb./ box Part 2 = 45 lb./ box (4) 1500-ml cartridges: 19 lb. A-Component = 40 lb./ box B-Component = 35 lb./ box SINGLE-PLY ADHESIVES Low VOC 3 Sq. Low VOC SBA 1121 PVC Bonding WB181 TPO Bonding M M Low Temp O Coverage Rate Low VOC sq. ft. per gallon Up to 70 sq. ft. per gallon of bonded membrane 60 sq. ft. per gallon or 300 sq. ft. per pail Smooth and eece-back membrane is approximately 120 sq. ft. per gallon sq. ft sq. ft./ sq. ft./ sq. ft sq. ft./ VOC 247 g/ L <250 g/ L 611 g/ L < 250 g/ L 8 g/ L 0 g/ L 0 g/ L 32 g/ L Quantity/ Size 5-gallon pail 5-gallon pail 5-gallon pail 5-gallon pail 5-gallon pail Weight 40 lb./ pail 38 lb./ pail 37 lb./ pail 36 lb./ pail 45 lb./ pail

5 PRIMERS Low VOC TPO Primer is designed for use with TPO membrane and Freedom TPO self-adhered products. Useful for ensuring good adhesion between adhesives, sealants, and TPO single-ply roo ng membranes. Low VOC content of 240 grams/ liter. Quantity/ Size 6-1-gallon cans/ Weight 59 lb./ TPO Primer is designed for use with TPO membrane and Freedom self-adhered TPO products. Solvent-based primer for metal edges and cover tape. Useful for ensuring good adhesion between adhesives, sealants, and TPO single-ply roo ng membranes. Quantity/ Size 6-1-gallon cans Weight 56 lb./ TPO Red Primer is a VOC-compliant, solvent-based liquid that is applied to new or aged TPO membranes to promote adhesion of water-based coatings or MajorSeal Liquid Flashing. It is lightly tinted red to discern primed areas on bright white TPO membranes. Promote adhesion of water-based coating to TPO. VOC compliant. Quantity/ Size 6-1-gallon cans/ Weight 56 lb./ SEALANTS GAF Pourable Sealant (Two-Part) is a 100% solid, urethane-based two-part sealant. Suitable for lling sealant pans at irregularly shaped penetrations. Quantity/ Size 1 kit = 1-gallon part A, 1-pint part B (2 kits per box with mixer and gloves) Weight 18 lb./ GAF WaterBlock Mastic is a one-part, butyl-based, high-viscosity sealant. Suitable for sealing between ashing membrane and substrate surface behind exposed termination bars. Suitable for sealing between roo ng membrane and drain anges. Quantity/ Size 25 tubes/ Weight 27 lb./ GAF FlexSeal Caulk Grade is a solvent-based synthetic elastomeric sealant. It is designed to maintain an effective bond and seal between materials of similar and dissimilar surfaces. Extremely exible and durable. Ideal for termination bar, railing, step ashings, or edge metal. Durable and UV resistant; will not chalk, crack, or peel. Quantity/ Size oz. tubes/ box Weight 19 lb./ box One-Part Pourable Sealant is a one-part, moisture-cure, self-leveling sealant designed for use in pitch pans on single-ply roof systems. Self-leveling provides a smooth, professional nished look. Application at temperatures as low as 30 F (-1 C). Quantity/ Size 4 pouches/ case Weight.053-gallon pouch 2017 GAF 3/ 17 #897 1 Campus Drive, Parsippany, NJ07054