Manufactured by: Distributed by:

Transcription

1 Distributed by: Manufactured by:

2 Contents Introduction 1 Modular Drill / Reamer PM-X Sagittal / Oscillating Saw PM-X Reciprocator / Sternum Saw PM-X Pin / Wire Driver Attachments 5 Drill Attachments 6 Reamer Attachments 7 Sternum Guard 7 Power Module 8 4-Bay Power Unit 8 Sterile Transfer Sleeve 9 Autoclave Case 9 Charging Bay Cover 9 Charging Bay 9 Easy Release Canister Lid 9 Product Information 10 K-2000 Sagittal/Oscillating Saw Blades/Aggressive Cut Sagittal/Oscillating Saw Blades Reciprocating Saw Blades 28 Sternum Saw Blades 29

3 Introduction 1 The Power System is a surgeon s best tool next to his hands. Every feature of Brasseler s Orthopaedic Power System is built with the surgeon in mind; from the ergonomicallydesigned handpiece to the quickconnect attachments, to the innovative sterile transfer system. Special features ensure that this system gives the surgeon smooth, precise, and powerful operation and superior control. This fully-functional, cordless device is equally suited to drilling, intramedullary reaming, sawing, or inserting pins. It is tough enough and stable enough to go from cortical bone to cancellous bone and stay right on track. The Power System offers a uniquely designed handpiece, an all-inclusive, timesaving sterile transfer Power Module, and a wide variety of quick-connect, multipurpose attachments. The Power System is specifically designed to address two of the most critical elements in orthopaedic surgery: reliable power and reduction of surgery time.

4 Modular Drill / Reamer - PM-X P ERFORMANCE SPECIFICATIONS: SPEED _ 100 to 700 rpm TORQUE _ 40 in/lb DRILL _ 100 in/lb REAMER Operates in FWD and REV with an added SAFE/OFF mode Reaches maximum speed in forward and reverse Couples to low profile, easy to use, reliable, quick connect drilling and reaming attachments Fully cannulated to accept up to 0.156" / 5/32 / 4.0mm pins 2 The well-balanced Modular Handpiece is a single-trigger device composed of extremely durable, solely mechanical components. A variety of quick-connect attachments make the modular handpiece a versatile time-saver. It can take a range of attachments designed for drilling, reaming and insertion/extraction of both wires and pins. Its quick-connect design saves crucial minutes during surgery. Precise control of the device remains consistent for the surgeon with variable speeds from 100 to 700 rpm in forward or reverse, with an available 100 in-lb of torque.

5 Sagittal / Oscillating Saw - PM-X P ERFORMANCE SPECIFICATIONS: SPEED _ 100 to 12,000 cpm 3 BLADE ARC _ 5º arc Blade collet easy to use, quick install and release system 12 position rotating head at 30 intervals. Innovative design allows enhanced visibility for surgeon The low-profile Sagittal/Oscillating Saw offers an unobstructed line of sight so that the surgeon can put the blade exactly where it s needed. The blade collet, with its simple-to-use install and release system, rotates and locks/unlocks quickly in 12 radial positions at 30 degree intervals. The blade collet mechanism helps ensure that the collet is easy to clean with no hidden areas. Recommended blades - pages 11 thru 27

6 Reciprocator / Sternum Saw - PM-X P ERFORMANCE SPECIFICATIONS: SPEED _ 100 to 17,000 cpm BLADE STROKE _ 0.125" Reciprocating Saw Four 90 interval blade positions Sternum Saw Two 180 interval blade positions 4 The dual-purpose Reciprocating/Sternum Saw can be used with a quickconnect guard which allows for cardiovascular/thoracic applications. Its wrenchless collet design offers easy loading and unloading of saw blades and up to four different blade positions. Recommended Reciprocating Saw Blades - pages 28 Recommended Sternum Saw Blades - pages 29 Sternum Guard PM-X Sternum Guard

7 Pin / Wire Driver Attachments P ERFORMANCE SPECIFICATIONS: Operate in forward and reverse Have direct drive mechanisms Nominal Speed: 700 RPM Nominal Torque: 35IN - LB PM-X Pin Driver Pin Diameters:.078" / 2.0mm / 5/64" -.156" / 4.0mm / 5/32" 5 PM-X Wire Driver Wire Diameters:.028"/ 0.7mm -.078" / 2.0mm Available January, 2007

8 Drill Attachments P ERFORMANCE SPECIFICATIONS: Operate in forward and reverse Have direct drive mechanisms Nominal Speed: 700 RPM Nominal Torque: 35IN - LB PM-X Trinkle/AO PM-X /4" Jacobs PM-X /32" Jacobs 6 PM-X Hudson PM-X Zimmer Attachment PM-X /4" Keyless Chuck Available October, 2006 PM-X mm Keyless Chuck Available August, 2006

9 Reamer Attachments P ERFORMANCE SPECIFICATIONS: Quick connect collet Operate in forward and reverse Speed: 250 RPM Nominal Torque: 100 in-lb PM-X Hudson PM-X Zimmer Attachment 7 PM-X AO Reamer PM-X /4" Jacobs Hi Torque Sternum Guard PM-X Sternum Guard

10 Accessories SPECIFICATIONS: Voltage: 9.6 V PM-X Motor: Brushless DC Charge Time: 1 Hr Working Temp: 32 F F (0 C - 50 C) Type: NiCd CAUTION: Do Not Sterilize Power Module SPECIFICATIONS: Main voltage: 100VAC 120VAC Max. Rated current: 10A Frequency: HZ Output voltage max.: 15VDC Classification: Protection class 1 8 Class of rating: Continuous operation Socket Outlet: 5A V~ 50/60 HZ EMC Compliance Standards: EN IEC CSA Safety Compliance: EN IEC CSA UL PM-X Bay Power Unit with Charging Bays

11 Accessories PM-X Sterile Transfer Sleeve PM-X Autoclave Case 9 PM-X Charging Bay Cover PM-X Charging Bay PM-X Easy Release Canister Lid

12 Product Ordering Information HANDPIECES PM - X PM - X PM - X ACCESSORIES PM - X PM - X PM - X PM - X PM - X PM - X PM - X Modular Drill / Reamer Sagittal/Oscillating Saw Reciprocator/Sternum Saw Power Module 4-Bay Power Unit Charging Bay Cover Charging Bay Autoclave Case Sterile Transfer Sleeve Easy Release Canister Lid ATTACHMENTS DRIVERS PM - X PM - X DRILLS PM - X PM - X PM - X PM - X PM - X PM - X PM - X REAMERS PM - X PM - X PM - X PM - X STERNUM GUARD PM - X Pin Driver Wire Driver Trinkle/AO Drill 1/4" Jacobs Drill w/ Key 5/32" Jacobs Drill w/ Key Hudson Drill Zimmer Drill 1/4" Keyless Chuck 3mm Keyless Chuck Hudson Reamer Zimmer Reamer AO Reamer 1/4" Jacobs Hi Torque w/ Key Sternum Guard 10

13 K-2000 Sagittal/Oscillating Saw Blades (Aggressive Cut) Cutting Cutting Cutting Material Depth Width Thickness Thickness BO mm in PMX mm in BO mm in BO mm in PMX mm in

14 K-2000 Sagittal/Oscillating Saw Blades (Aggressive Cut) Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in BO mm in PMX mm in

15 K-2000 Sagittal/Oscillating Saw Blades (Aggressive Cut) Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm in PMX mm in

16 K-2000 Sagittal/Oscillating Saw Blades (Aggressive Cut) Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm in PMX mm in

17 K-2000 Sagittal/Oscillating Saw Blades (Aggressive Cut) Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in BO mm in BO mm in PMX mm in BO mm in

18 K-2000 Sagittal/Oscillating Saw Blades (Aggressive Cut) Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in BO mm in BO mm in BO mm in

19 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm in PMX mm in

20 Sagittal/Oscillating Saw Blades Cutting Blade Cutting Material Edge Height Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm Diamond Tooth Design in PMX mm Diamond Tooth Design in

21 Sagittal/Oscillating Saw Blades Cutting Blade Cutting Material Edge Height Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm Diamond Tooth Design in PMX mm Diamond Tooth Design in

22 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in Diamond Tooth Design PMX mm Diamond Tooth Design in PMX mm Chromium Coating in PMX mm in

23 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness mm PMX mm in PMX mm in Diamond Tooth Design 21 PMX mm in mm Diamond Tooth Design PMX mm in PMX mm in

24 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm in Diamond Tooth Design PMX mm in

25 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in Diamond Tooth Design 23 PMX mm Diamond Tooth Design in PMX mm Diamond Tooth Design in PMX mm Diamond Tooth Design in

26 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm mm in Diamond Tooth Design PMX mm in PMX mm in PMX mm in

27 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm in PMX mm in

28 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in PMX mm in PMX mm in

29 mm 40 Sagittal/Oscillating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in PMX mm in

30 Reciprocating Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX PMX mm in mm in PMX mm in BO mm in BO mm Chromium Coating in BO mm Chromium Coating in

31 Sternum Saw Blades Cutting Cutting Cutting Material Depth Width Thickness Thickness PMX mm in PMX mm in

32 30

33 31

34 32

35 Manufactured by: Distributed by: One Brasseler Boulevard Savannah, Georgia Dover, Ohio (USA) Order/Information and K-2000 are trademarks of, Inc. Z Printed in USA 2006 Zimmer Orthopaedic Surgical Products, Inc.