392 Montecarlo with bracket

Transcription

1 392 Montecarlo with bracket The housing stays hooked on safety brackets during maintenance operations. Knife switch. Fitted with socket-pin connector. Cable gland with ø 9 minimum and ø mm maximum cable entry, complete with locking rings. Housing/Frame: In die-cast aluminium. Fitted with support bracket (pole connection ø60). Diffuser: Tempered glass, 5 mm thick, resistant to thermal shock and impact (UNI EN 150-1/01 tests). Coating: In different stages. Epoxy cationic electrocoating, resistant to corrosive and saline environments. Stage two: eco-friendly acrylic resin finish, sandblasted silver colour, UV stabilized. Standard supply: In case of maintenance, the upper housing stays open using brackets to prevent accidental closure. Knife switch and quick connector for electrical line. Bipower version: The items, together with the remote control system and the power adaptor, can be ordered using sub-code Items supplied with the remote control system only can be ordered using sub-code Upon request: coloured versions available with a surcharge.

2 Montecarlo 393 Coloured versions available at extra cost: Red RAL 30 Yellow RAL 1023 Blue RAL 5010 (silver ring). AMENITIES FIXTURES Housing/Frame: In die-cast aluminium, with aluminium latches. Coating: Grey epoxy cationic electrocoating, resistant to corrosive and saline environments. Second coating using sandblasted silver colour acrylic resin, eco-friendly, UV-stabilized. Standard supply: In case of maintenance, the frame stays hooked on an internal hinge. Knife switch. Bipower version: The items, together with the remote control system and the power adaptor, can be ordered using sub-code Items supplied with the remote control system only can be ordered using sub-code Upon request: coloured versions available with a surcharge.

3 394 Montecarlo with bracket cm 2 60 SAP-T CDO-TT E27 CDO-TT E27 new ø460 ø Optics: LIGHT POLLUTION PRE- VENTING SYSTEM in high-gloss aluminium, oxidized, 3 µ thick, polished Montecarlo - with bracket - bicycle pathways SAP-T 70 sil.+ grap K lm - Ra 4 CDO-TT 70 sil.+ grap K lm - Ra 1b ø 115 ø 105 ø 95 0

4 Montecarlo with bracket 395 ø460 ø SAP-T cm 2 E27/E40 CDO-TT E27/E SAP-T Optics: LIGHT POLLUTION PRE- VENTING SYSTEM in pressed anodically oxidized aluminium 99,85 and polished. LED 3180 Montecarlo 1 - with bracket - wide beam SAP-T 70 sil.+ grap K lm - Ra 4 SAP-T 150 sil.+ grap K lm - Ra 4 CDO-TT 70 sil.+ grap. 10, K lm - Ra 1b CDO-TT 150 sil.+ grap K lm - Ra 1b Complete with support for pole-mast-top mounting ø60. AMENITIES FIXTURES ø460 ø JM-TS Rx7s SAP-TS 1490 cm 2 Rx7s 1 ASYMM SAP-TS Optics: LIGHT POLLUTION PRE- VENTING SYSTEM in pressed anodically oxidized aluminium 99,85 and polished. LED H L 3181 Montecarlo 2 - with bracket - asymmetric SAP-TS 70 sil.+ grap K lm - Ra 4 SAP-TS 150 sil.+ grap K lm - Ra 4 JM-TS 70 sil.+ grap K lm - Ra 2a JM-TS 150 sil.+ grap K - 100lm - Ra 1b Complete with support for pole-mast-top mounting ø60. Ideal for illumination of pedestrian passages. Lighting results art Montecarlo Sourse Flux H L SAP-TS 70W SAP-TS 70W SAP-TS 150W

5 396 Montecarlo UV STOP JM-TS cm 2 JM-TS G13 Rx7s SAP-TS 105 Rx7s 277 Ø Diffuser: Flat glass. Optic unit: LIGHT POLLUTION PRE- VENTING OPTICAL SYSTEM, pressed optic unit in thermoplastic material and metal coating Montecarlo - with glass JM-TS 150 sil.+ grap K - 100lm - Ra 1b CDM-TS 150 sil.+ grap K lm - Ra 1b SAP-TS 150 sil.+ grap K lm - Ra 4 This article is suggested for application in public squares, using Corona accessories ø 1 ø 1 ø 1 ø 1 ø 1 ø ø 152 ø 152 0

6 Montecarlo 397 JM-TS G13 Rx7s SAP-TS Rx7s 1 ASYMM SAP-TS cm 2 Ø UV STOP Diffuser: Tempered glass, 5 mm thick, resistant to thermal shock and impact (UNI EN 150-1/01 tests). Optic unit: LIGHT POLLUTION PRE- VENTING OPTICAL SYSTEM in hammered aluminium. Installation example art H 3171 Montecarlo - asymmetric optics SAP-TS 70 sil.+ grap K lm - Ra 4 SAP-TS 150 sil.+ grap K lm - Ra 4 JM-TS 70 sil.+ grap K lm - Ra 2a JM-TS 150 sil.+ grap K - 100lm - Ra 1b Suitable for zebra crossings. LED L AMENITIES FIXTURES Ø460 SAP-T E40 CDO-TT E SAP-T cm UV STOP Diffuser: Tempered glass, 5 mm thick, resistant to thermal shock and impact (UNI EN 150-1/01 tests). Optic unit: LIGHT POLLUTION PRE- VENTING OPTICAL SYSTEM in pressed aluminium, anodically oxidized and polished. E.g. Installation art unilateral road version 3172 Montecarlo SAP-T 150 sil.+ grap K lm - Ra 4 CDO-TT 150 sil.+ grap K lm - Ra 1b LED D H I L E.g. Installation art bilateral road version

7 398 Montecarlo composition examples ES. a 25 - Montecarlo 2 Montecarlo art. 3171/72/73 1 pole to be chosen between acc. 1408/09* 1 Corona acc /88 1 fl ange acc /89 2 arms acc / *pole height can be specified as desired 1408/1409 ACC 1373 Example of project with art SAP-TS 70. Area 15x m; h=5 16 ACC 1364 ACC ES. ac 31 - Montecarlo 1 Montecarlo art. 3171/72/73 1 pole Luna acc arm acc ACC Example of project with art SAP-T 150. Area 10xm; h= ES. b 33 - Montecarlo 2 Montecarlo art. 3171/72/73 1 pole Luna acc double arm acc *pole height can be specified as desired 1489 ACC 469 Example of project with art CDO-TT 150. Area xm; h=6, acc. 211 Sector connection s. silver graphite In aluminium. For the pole installation ø 1. ø acc. 304 threaded connection galvanized Threaded connection to be used with acc. 301 for wall or pole installation of fixtures. ø 50 ø 50 ø 1 acc. 300 Oliva connection s. silver graphite In aluminium. For the pole installation ø60 of arm acc. 301 ø ø 60 acc. 15 ceiling mounting s. silver In aluminium. To be used for ceiling application or with acc. 380 for suspension. ø2 21 acc. 301 Oliva arm s. silver graphite In aluminium. To be used with acc. 300, 309 for the pole installation or with acc.302/309 for the wall. 652 ø 72 acc. 302 wall attachment s. silver graphite In aluminium. For the wall installation of arm acc

8 Montecarlo composition examples /1494 Example of project with art JM-TS 150. Area 15x10 m; h= ACC 211 ACC 301 ACC ES. ac 35 - Montecarlo 1 Montecarlo art. 3171/72/73 1 pole to be chosen between acc. 1493/94* 1 sector acc /53 1 Oliva arm acc /73 1 threaded connec. acc *pole height can be specified as desired Example of project with art SAP-T 150. Area 10xm; h=8 ES. c - Montecarlo arm Liberty 1 Montecarlo art. 3171/72/73 1 pole Liberty art with 1 arm Example of project with art CDO-TT 150. Area xm; h=6, ES. c 13 - Montecarlo arm Liberty 2 Montecarlo art. 3171/72/73 1 pole Liberty art with 2 arms AMENITIES FIXTURES acc. 5 Bracket for pole s. silver In die-cast aluminium. To be used on poles with Ø 60 connection. Supplied with socket-pin connector for quick installation. 850 Ø ø acc curved arm black s. silver In tropicalized steel. Apply to acc. 1464/1465 and pole acc. 1508/ ø 170 ø 60 acc Corona black s. silver Die-cast alum. For max 6 arms acc 1362 or Complete with terminal block acc curved arm for a wall graphite Complete with 2 bases in die-cast aluminium for wall mounting application. 40 ø 211 ø 105 acc Corona flange black s. silver Die-cast alum. Complete with 6 arm-stop devices to reinforce the assembly. 444 ø curved arm black s. silver In tropicalized steel. Apply to acc. 1364/65 and pole acc. 1408/1409. Max ø1 acc. 380 suspension s. silver In die-cast alum. with 3 steel wires ø 40 acc. 507 wall bracket Liberty graphite Supplied with 2 die-cast aluminium bases for wall mounting.