MATERIAL SAFETY DATA SHEET

Transcription

1 Product: BH-070 Page 1 of 5 MATERIAL SAFETY DATA SHEET SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Product Name: ReflectSleeve 1500 Manufacturer: Federal Mogul Corporation rthwestern Highway Southfield, MI MSDS# BH hr Emerg # (Infotrac): International: n-emerg #: SECTION 2: COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS BentleyHarris ReflectSleeve 1500 is a flexible, aluminized sleeve that provides excellent protection from radiant and reflected heat sources for critical engine and exhaust system components. The unique design offers ease of installation as well as resistance to extreme heat and fluids and mechanical abrasion protection. It is woven polyester monofilaments and texturized multifilaments with an aluminum foil outer layer. Although several of the ingredients used to formulate this product may be hazardous in the raw state, the manufacturing process results in a solid, infusible form, binding and otherwise, rendering the product inert. The identified constituents below may be present in quantities greater than 1% (0.1% for carcinogens) and may be release from the product by overheating, burning, machining, abrading, or riveting. This information provides the minimum criteria for safe usage and handling of this product. Companies using this product should develop their own occupational health program to protect employees from injury or adverse health effects. Ingredient CAS. % Weight OSHA PEL ACGIH TLV Thermoplastic Polyester ne Established 43 ne Established ne Established Polyester Multifilament Yarn ne Established 55 ne Established ne Established Aluminized Foil ne Established 2 ne Established ne Established SECTION 3: HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Shipped material is not considered hazardous, but operations (e.g., overheating, burning, machining, abrading, or riveting) that can create airborne dust should be avoided. POTENTIAL HEALTH EFFECTS Inhalation: Dust or vapors from heating can cause irritation. Skin: Molten material can cause thermal burns. Eye: Dust particles may cause irritation or corneal injury. Ingestion: t a probable route of entry. Revised: 04/27/2005 Page 1 of 5

2 Product: BH-070 Page 2 of 5 POTENTIAL HEALTH EFFECTS (continued) Carcinogenicity: COMPONENT NTP IARC OSHA Thermoplastic Polyester Polyester Multifilament Yarn Aluminized Foil Symptoms and Effects of Exposure to Selected Individual Components Exposure Hazards: ne known SECTION 4: FIRST AID MEASURES Inhalation: Eye Contact: Skin Contact: Ingestion: Move to fresh air. Seek medical attention. Rinse thoroughly with ample amounts of water. Seek medical attention. Wash thoroughly with soap and water. If molten material falls on skin, do not attempt to remove material; cool immediately with water. Seek medical attention. If significant quantities have been consumed, give two glasses of water to induce vomiting. Seek medical attention. Revised: 04/27/2005 Page 2 of 5

3 Product: BH-070 Page 3 of 5 SECTION 5: FIRE FIGHTING MEASURES This product is inherently flame resistant, but may ignite at temperature exceeding 600 C in an oxygenenriched atmosphere. Flashpoint: N/A LEL: N/A UEL: N/A Autoignition Temperature: N/A Extinguishing Media: Use media suitable for surrounding fire. Unusual Fire and Explosion Hazards: ne Special Fire Fighting Procedure: Wear self-contained breathing apparatus when extinguishing. Hazardous decomposition products are generated in fire conditions. SECTION 6: ACCIDENTAL RELEASE MEASURES Scrap monofilament may present a slipping hazard. Sweep up and dispose of according to all federal and state disposal procedures. If dust is generated during machining, abrading or riveting, remove dust by vacuuming or wet-mopping. Vacuums should be equipped with HEPA filters. Do not use compressed air to blow dust from surfaces. SECTION 7: HANDLING AND STORAGE If dust is generated while shipping product, remove dust by vacuuming or wet-mopping. Vacuums used for this purpose should be equipped with HEPA filters. Do not use compressed air to blow dust from surfaces. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Ventilation Protection: Respiratory Protection: Skin Protection: Eyes: Any operation which may produce dust, including machining, grinding, riveting, or abrading this product, should be adequately exhausted to prevent inhalation of dust. Use a NIOSH-approved respirator if there is a potential for exposure to dust, vapor, or fume exceeding PELs or TLVs. (See 29 CFR , OSHA Respiratory Protection Standard.) If skin irritation occurs, gloves and other protective garments may be worn. Wear safety glasses or goggles, as necessary, if dust exposure is possible. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Boiling Point: N/A Vapor Pressure: N/A Melting Point: 256 C Vapor Density (air = 1): N/A ph: N/A % Volatile: N/A Specific Gravity: 1.38 g/cc Evaporation Rate: N/A Water Solubility: Insoluble Form, Color and Odor: Solid, black and odorless Revised: 04/27/2005 Page 3 of 5

4 Product: BH-070 Page 4 of 5 SECTION 10: STABILITY AND REACTIVITY Stability: Incompatibility (Materials/Conditions to Avoid): Hazardous Polymerization: Stable at normal temperatures and storage conditions. ne known Will not polymerize Decomposition Products: Avoid exposing to temperatures greater than 300 C for prolonged periods of time. At this temperature, thermal decomposition starts to occur producing such by-products as carbon monoxide and trace amounts of esters, alcohols, acids and acetaldehyde. SECTION 11: TOXICOLOGICAL INFORMATION Inhalation: Refer to Section 3 Skin: Refer to Section 3 Eye: Refer to Section 3 Ingestion: Refer to Section 3 Acute: Chronic: ne known ne known SECTION 12: ECOLOGICAL INFORMATION N/A SECTION 13: DISPOSAL CONSIDERATIONS Federal and state law regulates disposal of scrap material or dust as solid waste; disposal must be in accordance with federal and state laws. Contact local regulatory agencies for guidance. SECTION 14: TRANSPORTATION INFORMATION Proper Shipping Name: Hazard Class: Identification Number: Packing Group: Shipping Label: Additional Marking Requirement: t regulated ne ne N/A ne ne Revised: 04/27/2005 Page 4 of 5

5 Product: BH-070 Page 5 of 5 SECTION 15: REGULATORY INFORMATION U.S. TSCA: California Proposition 65: SARA Title III Section 313 Supplier tification: RCRA Hazardous Waste Code: CERCLA Hazardous Substances: OSHA: WHMIS Classification: All chemicals used in the manufacture of this product are listed on the U.S. Toxic Substances Control Act (TSCA) Inventory This product does not contain ingredients known to the State of California to cause cancer, birth defects or other reproductive effects. This product does not contain chemicals subject to SARA Title III/CERCLA reportable quantities (RQs) and/or threshold planning quantities (TPQs) and/or are classified as Toxic Chemicals under the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and 40 CFR 372. t Available t Available t Available t Available SECTION 16: OTHER INFORMATION Abbreviations: CAS.: Chemical Abstract Services Number OSHA PEL: U.S. Occupational Safety and Health Administration Permissible Exposure Limit ACGIH TLV: American Conference of Governmental Industrial Hygienists Threshold Limit Value (2004) N/A: t Applicable IARC: International Agency for Research on Cancer NTP: National Toxicology Program The information and recommendations stated above are taken from sources believed to be accurate as of the date of this revision. Federal-Mogul makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability, including direct, incidental or consequential damages for any reliance thereof. This MSDS should not be used as a complete or accurate summary of the content of this product. For specific information on brand names, manufacturers, or quantities, please refer to product specification documents, wherever available. Revised: 04/27/2005 Page 5 of 5