6 Wastewater. Renovation/retrofit set and Page 280 OEM original equipment set InnoClean PLUS. for concrete tanks

Transcription

1 InnoClean PUS Page wastewater Small sewage treatment plants using the activated sludge principle (SR) Renovation/retrofit set and Page 280 OEM original equipment set InnoClean PUS for concrete tanks Collecting tank without drain Page for domestic wastewater Catalogue

2 KESSEProduct information for InnoClean PUS wastewater InnoClean PUS wastewater made of polyethylene InnoClean PUS wastewater treatment system made of polyethylene SYSTEM ADVANTAGES / INSTAATION InnoClean PUS wastewater treatment system Proven wastewater treatment method using SR reactors biological treatment method with technical wastewater aeration. CONVENIENCE Only two maintenance checks per year rather than three thanks to automatic power failure recognition. ow power costs economy and holiday modes reduce energy costs. Interactive control unit (Fig. 1) with digital display and userfriendly user interface. Treatment tower and perforated aeration rod can be removed without having to enter or empty the tank (Fig. 2). INSTAATION Installation made easier thanks to plugandplay delivery (Fig. 3). ow weight, small installation dimensions. Telescopic, heightadjustable upper section can be driven over by passenger cars (Fig. 4, 5). In remote rural areas in particular, houses are not always connected to the public sewer system. Polyethylene septic tanks are much more than just an alternative to concrete systems. ow transport costs, absolute watertightness, durability and extreme fracture resistance are just a few of the advantages of the polyethylene material used. 20year warrenty for PE material Polyethylene Warranty Polyethylene Warranty 20 Years Catalogue 3.0

3 OEM original equipment set InnoClean PUS for twochamber tanks made of concrete Renovation/retrofitting set InnoClean PUS for septic and threechamber tanks made of concrete SYSTEM ADVANTAGES / INSTAATION OEM original equipment set Treatment tower with integrated sampling chamber for use in twochamber tanks made of concrete to add an additional biological treatment stage using the acitivated sludge method SR. CONVENIENCE Energysaving and lowmaintenance air lift pumps (pneumatic). Automatic power failure detection (2 maintenance checks/year). Perforated aeration rod can also be removed when the tank is full. Interactive control unit in several languages. INSTAATION Preassembled in the factory, very straightforward mounting through simple clipping onto the partition wall. SYSTEM ADVANTAGES / INSTAATION renovation/retrofit set For retrofitting conventional septic and threechamber tanks made of concrete to add an additional biological treatment stage using the activated sludge method SR. CONVENIENCE Energysaving and lowmaintenance pneumatic lifting technology. Automatic power failure detection (2 maintenance checks/year). Perforated aeration rod can also be removed when the tank is full. Interactive control unit in several languages. INSTAATION Very straightforward mounting through simple clipping onto the partition walls. No intervention in the direction of system flow and thus no need for any excavation work (except for the cable conduit) Catalogue

4 InnoClean PUS wastewater for underground installation Single tank system Products Illustration / Article description Total capacity of the system (liters) Weight in kg (approx.) Installation version PE 4 PE PE 8 PE l 4800 l 700 l 700 l A 97 80A A A = max. ground water level (Dmin 700 mm) DEC = depth of earth coverage h empty = height of cable piping Inlet Outlet InnoClean PUS Fully biological wastewater treatment system according to EN 125 manufactured from polyethylene Single body (monolythic) tank, for underground installation. Installation depth D =... mm. Chamber with gasketed inlet / outlet openings for connection of Ø 10 mm PVC inlet and outlet piping according to EN or for Ø 10 mm PEHD inlet and outlet piping according to EN 121. For installation in high groundwater areas, maximum groundwater level = 1840 mm. With integrated, preinstalled cleaning system. All ventilation hoses and clamps for connection of InnoClean PUS tank to control unit / compressor are included with system. With control unit and low maintenance compressor (230 V 50 Hz). Float switch and air compressor connections to be made onsite. Certification number: Z / Z Installation versions: 1 With polyethylene temporary construction debris cover (can be used as a cover in green areas if there is sufficient protection against unauthorised opening). 2 With polymer vertically adjustable upper section, with polymer cover (00 kg load class). 3 With polymer vertically adjustable upper section, with concrete / cast iron cover (Class, 12.5 t). h2 D 2300 h empty DEC Accessories: see page 277 to page 279 PE 4 PE PE 8 PE 10 min. D max. DEC = D D 255 D 255 D 255 D 255 * equivalent = number of people living in home which will be connected to the InnoClean PUS h2 h empty 272 Catalogue 3.0

5 InnoClean PUS wastewater for underground installation Installation example Professional advantages Control unit and compressor inlet KESSE InnoClean PUS tank Child proof load class (12.5 ton) cover Treatment tower with integrated sampling Description of operation Sludge transfer Excess sludge is returned to the sludge storage tank T R E A T M P H A S E E N T 8 hour wastewater treatment cycle 1 Incoming wastewater enters the pretreatment chamber where solids settle to the bottom. Pretreatment chamber Integrated separation wall Activation chamber Outlet to dry well C C Y E 2 Filling of treatment chamber The pretreated wastewater is pumped to the treatment chamber. Full line of system sizes Available in size PE 4 to PE 50 User friendly operation Interactive control unit with CD readout and user friendly touch pad (max. distance to system 27.5 m) ow weight Complete installation handled with standard construction equipment. Quick connection for ventilation hoses Easy connection of air compressor no tools required Treatment tower is completely removable for maintenance / inspection Ready to go system provides simplified onsite installation Compressor pump and aeration diffusor easily removed for inspection and maintenance Three different installation versions to meet custom installation requirements Variable upper section inclinable, height adjustable and private vehicle traffic proof Power usage calculation example: 0.11 KWh x 2 hours/day x 35 days/year = KWh (Power usage air compressor) 0,01 KWh x 24 hours/day x 35 days/year = 87.0 KWh (Power usage control unit) Total annual power consumption: = KWh At 0.25 /KWh this results in a total annual operational cost of only 42 Note: If the InnoClean automatically goes into vacation or sleep mode, annual power costs would be even lower. Scan this QR code to directly view the corresponding product video. 5 Emptying of treated wastewater 3 Treatment / Ventilation of wastewater The treated wastewater is then pumped out of the treatment chamber. After 8 hours the complete cycle has ended. In the case that sufficient wastewater is available in the pretreatment chamber, the The hour treatment phase begins the wastewater is intermittently supplied with bursts of oxygen. These bursts provide the microorganisms with required oxygen to begin their treatment entire 8 hours cycle begins again. process (denitrification). 4 Sedimentation phase In the case that no or little wastewater has been collected, the InnoClean PUS automatically goes into energy savings mode. After the hour treatment phase a 1 or 2 hour sedimentation phase begins where sludge settles to the base and the treated wastewater clears. Catalogue

6 InnoClean PUS wastewater for underground installation Twin tank system Products Illustration / Article description Total capacity of the system (liters) Weight in kg (approx.) Installation version Tank 1 Inlet Outlet PE 12 PE 14 PE 1 PE 18 PE l l l l l A A 97 81A A A Tank 2 = max. ground water level (Dmin 700 mm) DEC = depth of earth coverage h empty = height of cable piping InnoClean PUS Fully biological wastewater treatment system according to EN 125 manufactured from polyethylene Single body (monolythic) tank, for underground installation. Installation depth D =... mm. Chamber with gasketed inlet / outlet openings for connection of Ø 10 mm PVC inlet and outlet piping according to EN or for Ø 10 mm PEHD inlet and outlet piping according to EN 121. For installation in high groundwater areas, maximum groundwater level = 1840 mm. With integrated, preinstalled cleaning system. All ventilation hoses and clamps for connection of InnoClean PUS tank to control unit / compressor are included with system. With control unit and low maintenance compressor (230 V 50 Hz). Float switch and air compressor connections to be made onsite. Certification number: Z / Z Installation versions: 1 With polyethylene temporary construction debris cover (can be used as a cover in green areas if there is sufficient protection against unauthorised opening). 2 With polymer vertically adjustable upper section, with polymer cover (00 kg load class). 3 With polymer vertically adjustable upper section, with concrete / cast iron cover (Class, 12.5 t). Accessories: see page 277 to page 279 h2 D 2300 h empty DEC PE 12 PE 14 PE 1 PE 18 PE 20 min. D max. DEC = D D 255 D 255 D 255 D 255 D 255 h2 h empty * equivalent = number of people living in home which will be connected to the InnoClean PUS 274 Catalogue 3.0

7 InnoClean PUS wastewater for underground installation Three tank system Products Illustration / Article description Total capacity of the system (liters) Weight in kg (approx.) Installation version Tank 1 Inlet 1 PE 22 PE 24 PE 2 PE 28 PE l l l l l A A 97 82A A A Tank 2 1 Tank 3 1 = max. ground water level (Dmin 700 mm) DEC = depth of earth coverage h empty = height of cable piping Outlet InnoClean PUS Fully biological wastewater treatment system according to EN 125 manufactured from polyethylene Single body (monolythic) tank, for underground installation. Installation depth D =... mm. Chamber with gasketed inlet / outlet openings for connection of Ø 10 mm PVC inlet and outlet piping according to EN or for Ø 10 mm PEHD inlet and outlet piping according to EN 121. For installation in high groundwater areas, maximum groundwater level = 1840 mm. With integrated, preinstalled cleaning system. All ventilation hoses and clamps for connection of InnoClean PUS tank to control unit / compressor are included with system. With control unit and low maintenance compressor (230 V 50 Hz). Float switch and air compressor connections to be made onsite. Certification number: Z / Z Installation versions: 1 With polyethylene temporary construction debris cover (can be used as a cover in green areas if there is sufficient protection against unauthorised opening). 2 With polymer vertically adjustable upper section, with polymer cover (00 kg load class). 3 With polymer vertically adjustable upper section, with concrete / cast iron cover (Class, 12.5 t). Accessories: see page 277 to page 279 h2 D 2300 h empty DEC PE 22 PE 24 PE 2 PE 28 PE 30 min. D max. DEC = D D 255 D 255 D 255 D 255 D 255 h2 h empty * equivalent = number of people living in home which will be connected to the InnoClean PUS Catalogue

8 InnoClean PUS wastewater for underground installation Six tank system Products Illustration / Article description Total capacity of the system (liters) Weight in kg (approx.) Installation version Tank 1 Tank 2 Inlet 1 1 PE 32 PE 34 PE 3 PE 38 PE 40 PE 42 PE 44 PE 4 PE 48 PE l l l 300 l 300 l 300 l 300 l 4 l 4 l 4 l A A 97 83A A A A A 97 84A A A Tank 5 1 Tank 3 1 = max. ground water level (Dmin 700 mm) DEC = depth of earth coverage h empty = height of cable piping Tank 1 Tank 4 1 Outlet Outlet InnoClean PUS Fully biological wastewater treatment system according to EN 125 manufactured from polyethylene Single body (monolythic) tank, for underground installation. Installation depth D =... mm. Chamber with gasketed inlet / outlet openings for connection of Ø 10 mm PVC inlet and outlet piping according to EN or for Ø 10 mm PEHD inlet and outlet piping according to EN 121. For installation in high groundwater areas, maximum groundwater level = 1840 mm. With integrated, preinstalled cleaning system. All ventilation hoses and clamps for connection of InnoClean PUS tank to control unit / compressor are included with system. With control unit and low maintenance compressor (230 V 50 Hz). Float switch and air compressor connections to be made onsite. Certification number: Z / Z Installation versions: 1 With polyethylene temporary construction debris cover (can be used as a cover in green areas if there is sufficient protection against unauthorised opening). 2 With polymer vertically adjustable upper section, with polymer cover (00 kg load class). 3 With polymer vertically adjustable upper section, with concrete / cast iron cover (Class, 12.5 t) h2 D h empty DEC Accessories: see page 277 to page 279 PE 32 PE 34 PE 3 PE 38 PE 40 PE 42 PE 44 PE 4 PE 48 PE 50 min. D max. DEC = D D 255 D 255 D 255 D 255 D 255 D 255 D 255 D 255 D 255 D 255 h2 h empty * equivalent = number of people living in home which will be connected to the InnoClean PUS 27 Catalogue 3.0

9 InnoClean PUS wastewater / collection tanks Illustration and dimensioned drawing Cover plate made of polymer unlocked, 00 kg load class Outer diameter Article description Ø (mm) Article # Accessories Cover plate in concrete / cast iron unlocked, traffic proof up to class / 12.5 t Cover plate in cast iron surface water tight, locked, traffic proof up to class D / 40 t Upper section made of polymer, surface water tight For flexible adaption to the ground level, use in combination with covers Art. # , and oad class A/ or D locked, continuous height adjustment from 50 mm up to 500 mm Upper section made of polymer for standard manhole extension rings made of concrete and for concrete / cast iron covers Can be used in combination with standard concrete extension rings for a flexible adaption to the ground level. Continuous height adjustment from 50 mm up to 500 mm Clamping ring for upper section for fixing the upper section during construction ipsealing gasket for connection between InnoClean PUS tank and adjustable upper section Ø Extension section made of polymer for use with deeper installation depths Extension height 510 mm; incl. gasket smaller/larger extension sections available on request Catalogue

10 InnoClean PUS wastewater Illustration Outer diameter Article description Ø (mm) Article # Phosphate treatment +P for InnoClean PUS For additional phosphate reduction for InnoClean PUS wastewater. Consists of: Dosing pump, plastic hose with screw connection and cable sleeve. Accessories Polyethylene wall mount (includes mounting hardware) For installation of control unit and compressor Cable entrance seal Water/Odour tight seal for passage of ventilation hose and single float switch cable. Includes additional passage for electrical cable if required Kiosk for control unit and compressor housing for outdoor applications Ground level Thermostat / Hygrostat For use in InnoClean PUS outdoor kiosks For condensation reduction Warning beacon For installation on InnoClean PUS outdoor kiosks. For connection to InnoClean PUS control unit InnoClean PUS cable extension set For extension of control unit and compressor cables. Max extension 27.5 meters Catalogue 3.0

11 InnoClean PUS wastewater / collection tanks Illustration and dimensioned drawing Outer diameter Article description Ø (mm) Article # Hole saw for cutting holes for pipe sealing gaskets Ø 50, 75, 110, 125, 10. (Saw blade holder Ø = 190 mm) Ø 5010 Accessories Gasket for pipe conduit For drilling lateral surfaces for inlets and outlets. Ø 50 Ø 75 Ø 110 Ø 125 Ø Manhole cover removal tool Suitable for articles and Activated charcoal filter made of polymer (AS), with replaceable cartridge, with activated charcoal Suitable for pipes Ø 75 and Ø 110 Activated charcoal cartridge as alternative for filter element in the activated charcoal filter (Art. # ) Aluminium cover with polystyrene insulating hood; fits activated charcoal filter Warning sticker for toilet lid Sheet with 2 stickers Ø 9.5 cm and 5 stickers Ø cm i Technical note: Weatherrelated influences or cooling of the tanks during the installation phase (caused by filling with cold water) can lead to deviations in dimensions from the catalogue specifications in the case of wastewater installed in the ground. Catalogue

12 Retrofit or upgrade package InnoClean PUS OEM set InnoClean PUS Retrofit or upgrade package InnoClean PUS Illustration Outer diameter Article description Ø (mm) Article # Products Retrofit or upgrade package InnoClean PUS SR upgrade package for use in twin or multiple chamber concrete septic systems, for use with divider walls up to 190 cm in height. Package consists of: Air lift for loading water transfer and sludge return, quick release locks for compressor air hose, aerator hose, valve block, air compressor, control unit and sampling chamber. Cable and hose for connection from control unit to InnoClean PUS max length 15 m 4/ 8/ Certification number: Z OEM set InnoClean PUS Illustration Outer diameter Article description Ø (mm) Article # OEM set InnoClean PUS Treatment tower with integrated sampling for standard equipping of twin tank pit made of concrete with fully biological treatment in an activated sludge system Package consists of: Air lift pumps for loading, water transfer pipes and sludge return with quickrelease locks for the compressed air hose, aerator hose, valve block with float switch, compressor, control unit. 15 m compressed air hose. 450 Products Certification number: Z Catalogue 3.0

13 collection tanks for underground installation 000 and 9000 liter Products Illustration Article description Capacity Article # collection tank for collecting household wastewater For underground installation with protective cover for installation period, drilling surfaces for inlet, venting and connection socket up to Ø 10 Accessories Telescopic upper section Art. # and covers class A//D Art. # , , see page l 9000 l A A = max. ground water level (Dmin 700 mm) Inlet Illustration shows Art. # A with upper section as accessories Outlet h2 D h empty DEC 2300 DEC = depth of earth coverage h empty = height of cable piping Capacity 000 liter 9000 liter min. D max. DEC = D D 255 D 255 h2 h empty collection tank with two chambers for collecting household wastewater can be retrofited to a fully biological sewage treatment system InnoClean PUS (Retrofit or upgrade package see page 28) For underground installation with protective cover for installation period, drilling surfaces for inlet, venting and connection socket up to Ø l 9000 l Illustration shows Art. # with upper section as accessories Accessories Telescopic upper section Art. # and covers class A//D Art. # , , see page 277 = max. ground water level (Dmin 700 mm) Inlet Outlet h2 D h empty DEC 2300 DEC = depth of earth coverage h empty = height of cable piping Capacity 000 liter 9000 liter min. D max. DEC = D D 255 D 255 h2 h empty Catalogue

14 collection tanks for underground installation, 3000 and 4500 liter Products Illustration Article description Capacity Article # Drainless collection tank for collecting household wastewater For underground installation with protective cover for installation period, drilling surfaces for inlet, venting and connection socket up to Ø 10 Accessories Telescopic upper section Art. # and covers class A//D Art. # , , see page 277 l 3000 l 4500 l h 1 h 2 h 2 h h h 3 h 3 Ø D Ø D Capacity mm liter liter liter 170 * Middle dimension cutting surfaces h mm * mm h2* mm h3* mm mm i Technical note: Weatherrelated influences or cooling of the tanks during the installation phase (caused by filling with cold water) can lead to deviations in dimensions from the catalogue specifications in the case of wastewater installed in the ground. 282 Catalogue 3.0