Technical Application Guide for UP-SHINE LED Downlight UP-DL103A-2.5-8W

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL13A-2.5-8W

2 Introduction DL13 LED recessed downlight adopts super slim and compact design, perfectly suitable for the narrow ceiling installation. IP65 rating front cover design, suitable for damp environment. Traditional diamond plaited surface lens design ensures the high light transmittance and uniform lighting output. T-shape heat sink greatly increases the radiation area and improves cooling efficiency. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours Triac dim, -1V dim, DALI dim 36 /6 wide beam angle Ø68-72mm cutout CCT: 27K 3K 4K 5K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate SAA

3 Product Information Ø Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL13A-2.5-8W AC23V 8W /6 27K 4h 8 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 3K 4h 8 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 4K 4h 8 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 5K 4h 8 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 27K 4h 8 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 3K 4h 8 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 4K 4h 8 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 5K 4h 8 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 27K 4h 9 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 3K 4h 9 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 4K 4h 9 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W AC23V 8W /6 5K 4h 9 No Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 27K 4h 9 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 3K 4h 9 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 4K 4h 9 Yes Ø8*4mm cutout Ø68-72mm UP-DL13A-2.5-8W-D AC23V 8W /6 5K 4h 9 Yes Ø8*4mm cutout Ø68-72mm Driver data Sheet Fixture Compatibility Rated Wattage Driver data DIM Non dim Input rated Voltage AC23V AC23V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC2-24V Efficiency 78% 8% Total load Wattage 8W±.5W 8W±.5W Power Factor.9.9 Rated input current.45a.45a Full load output Voltage DC28-38V DC27-42V Rated output current 18mA 185mA Output current range 18mA±5% 185mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS THD 2% 18% Withstand voltage AC375V AC375V Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 8W Ⅱ IP65-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 27K 3K.8 Max=5363 [1.=2] 5.57 SDCM F27K.8 Max=5374 [1.=2] 2.58 SDCM F3K x=.4667 y= x=.4427 y= K 5K.8 Max=5466 [1.=2] 3.63 SDCM F4K.8 Max=5997 [1.=2] 5.81 SDCM F5K x=.3941 y= x=.3568 y= Photometric Diagram 27K 3K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: 36.2 lm Flux out: lm / MH=1m C/18 C9/ / MH=1m C/18 C9/ AVERAGE BEAM ANGLE(5%): 38.6 DEG Height Eavg, Emax Angle: 38.34deg Diameter AVERAGE BEAM ANGLE(5%): 37.7 DEG Height Eavg, Emax Angle: 37.34deg Diameter 4K 5K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: 48.3 lm Flux out: lm / MH=1m C/18 C9/ / MH=1m C/18 C9/ AVERAGE BEAM ANGLE(5%): 38.2 DEG Height Eavg, Emax Angle: 38.33deg Diameter AVERAGE BEAM ANGLE(5%): 37.5 DEG Height Eavg, Emax Angle: 37.1deg Diameter

5 Polar Diagram Comparison -15 O -/+18 O 15 O -12 O 12 O -9 O 9 O -6 O O -3 O 3 O O AVERAGE BEAM ANGLE (5%): 37.5DEG C/18, 37.7 deg C3/21, 37.6 deg C6/24, 37.5 deg C9/27, 37.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 8 Temperature ( o C) :37:46 19:7:44 19:37:44 2:7:44 2:37:44 21:7:44 21:37:44 22:7:44 23:7:44 23:37:44 :7:44 :37:44 1:7:44 1:37:44 2:7:44 2:37:44 3:7:44 3:37:44 4:7:44 4:37:44 5:7:44 5:37:44 6:7:44 6:37:44 7:7:44 7:37:44 8:7:44 8:37:44 9:7:44 Time The driver lifespan is based on capacitor working temperature. IC Capacitor MOS PCB LED Fitting Environmental temperature

6 Installation Install requirements A-gap above the fitting 25mm A B B-gap to the building material 25mm Power supply C C-gap to the thermal insulation 5mm 1. Open a hole according to the cutout size of led downlight. 2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back. 3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole. 4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1). Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 52.5*52.5* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China