DOCUMENT DESPATCH ADVICE

Transcription

1 DRAFT IN WIDE CIRCULATION REF: PCD 3/( 2749 to 2754)C DATE: DOCUMENT DESPATCH ADVICE TECHNICAL COMMITTEE: Petroleum Lubricants and Related Products Sectional Committee, PCD 3 To i) All interested members of PCDC ii) All members of Petroleum Lubricants and Related Products Sectional Committee, PCD 3 & its Subcommittees iii) All others interested. Dear Sir, Please find enclosed the following document: Doc: No. Doc:PCD 3 (2749 )C ISO :2010,Petroleum products -- Fuels (class F) classification -- Part 1: Categories of marine fuels Doc:PCD 3 (2750 )C ISO :1986,Petroleum products -- Fuels (class F) -- Classification -- Part 2: Categories of gas turbine fuels for industrial and marine applications Doc:PCD 3 (2751 )C ISO :1987,Petroleum products -- Fuels (class F) -- Classification -- Part 3: Family L (Liquefied petroleum gases) Doc:PCD 3 (2752 )C ISO :2002,Petroleum products -- Fuels (class F) -- Classification -- Part 99: General Doc:PCD 3 (2753 )C ISO/TS 11366:2011,Petroleum and related products --

2 Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines Doc:PCD 3 (2754 )C ISO/TS 11365:2011,Petroleum and related products -- Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids Kindly examine this draft and forward your views stating any difficulty which you are likely to experience in your business or profession, if these are finally adopted as Indian Standards. Last date for comments is : 10 January 2014 The copy of ISO standard can be provided on request to the undersigned at the given contact details below. Comments if any, may please be made in the format as given overleaf and mailed to the undersigned at the above address. The document is also hosted on BIS website Thanking you, Sc. F & Head (PCD) Office Telephone/Fax No.: Encl.: As above. mailto:vijay.malik@bis.org.in pcd@bis.org.in, chitra@bis.org.in

3 य पक प रच लन मस द ल ख षण स पन स दभ दन क प स ड 3( )स तकन क सम त प स ड 3 षत प लयम तकन क सम त, प स ड 3 क सम त सद य प स ड 3 क सभ उपस म तय प लयम, क यल एव स ब धत उ प द वभ ग प रषद (प स ड स ) क सद य च रखन व ल सभ मह दय/ मह दय, आपक अवल कन ह त न न ल खत भ रत य म नक क मस द स ल न ह म द त व ज़ स य श षक प स ड 3 (2749)स आई एस ओ प लयम उ प द - स य. 1 - भ ग 1: सम 2 प स ड 3 (2750)स धन क णय आई एस ओ :1986 प लयम उ प द वग करण - भ ग 2: औ गक और सम टरब इन 3 प स ड 3 (2751)स 4 प स ड 3 (2752)स 5 प स ड 3 (2753)स धन (वग एफ) वग करण धन क धन (वग एफ) - अन य ग क लए ग स णय आई एस ओ :1987, प लयम उ प द एफ - (वग करण - भ ग :3 प रव र) व भ त प लयम ग स( आई एस ओ :2002, प लयम उ प द एफ - (वग करण - भ ग :99 जनरल धन) वग धन) वग आई एस ओ /ट एस 11366:2011, प लयम और स ब धत उ प द - भ प, ग स और स य च टब इन क लए त ल म

4 चकन ई म स व स ग क लए म गदशन 6 प स ड 3 (2754)स आई एस ओ /ट एस 11365:2011, प लयम और स ब धत उ प द - triaryl फ फ ट ए टर टरब इन नय ण तरल पद थ क रखरख व और य ग क लए नदश क पय इन मस द क अवल कन कर अपन स म तय यह बत त ह ए भ ज क य द अ तत: यह म नक मस द र य म नक क प म क शत ह ज ए त इन पर अमल करन म आपक यवस य अथव क र ब र म य क ठन इय आ सकत ह स म तय भ जन क अ तम त थ : 10 जनवर 2014 स म तय क पय स ल न प म अध -ह त र क भ ज ध यव द, भवद य व नक एफ एव त उप र ल खत म ख(प स ड ) म ल : pcd@bis.org.in, chi tra@bi so. rgi. n

5 FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS (Please use A4 size sheet of paper only and type within fields indicated. Comments on each clauses/sub-clauses/table/fig. etc be started on a fresh box. Information in Column 4 should include reasons for the comments and suggestions for modified wording of the clauses when the existing text is found not acceptable. Adherence to this format facilitates Secretariat s work) Doc. No: TITLE: LAST DATE OF COMMENTS: 10 January 2014 NAME OF THE COMMENTATOR/ORGANIZATION:

6 Sl. No. Clause/Subclause/ para/table/fig. No. commented Commentator/ Organization/ Abbreviation Type of Comments (General/Editorial/ Technical) Justification Proposed change

7

8 For Comments Only Doc:PCD3(2749)C ISO :2010 October 2013 DRAFT INDIAN STANDARD Petroleum products -- Fuels (class F) classification -- Part 1: Categories of marine fuels Last date for comments 10 January 2014 ICS No NATIONAL FOREWORD (Formal clauses will be added later) The text of ISO Standard has been proposed to be approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. The Technical Committee has reviewed the provisions of the following International Standards referred in this adopted Standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO :2002 Petroleum products Fuels (class F) Classification Part 99: General ISO 8217:2010 Petroleum products Fuels (class F) Specifications of marine fuels

9 For Comments Only Doc:PCD3(2750)C ISO :1986 October 2013 DRAFT INDIAN STANDARD Petroleum products -- Fuels (class F) -- Classification -- Part 2: Categories of gas turbine fuels for industrial and marine applications Last date for comments 10 January 2014 ICS No NATIONAL FOREWORD (Formal clauses will be added later) The text of ISO Standard has been proposed to be approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. The Technical Committee has reviewed the provisions of the following International Standards referred in this adopted Standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO 8216/0 Petroleum products Fuels (Class Fl)

10 For Comments Only Doc:PCD3(2751)C ISO :1987 October 2013 DRAFT INDIAN STANDARD Petroleum products -- Fuels (class F) -- Classification -- Part 3: Family L (Liquefied petroleum gases) Last date for comments 10 January 2014 ICS No NATIONAL FOREWORD (Formal clauses will be added later) The text of ISO Standard has been proposed to be approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. The Technical Committee has reviewed the provisions of the following International Standards referred in this adopted Standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO 8216/0 Petroleum products Fuels (Class Fl)

11 For Comments Only Doc:PCD3(2752)C ISO :2002 October 2013 DRAFT INDIAN STANDARD Petroleum products -- Fuels (class F) -- Classification -- Part 99: General Last date for comments 10 January 2014 ICS No NATIONAL FOREWORD (Formal clauses will be added later) The text of ISO Standard has been proposed to be approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. The Technical Committee has reviewed the provisions of the following International Standards referred in this adopted Standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO 8681:1986 Petroleum products and lubricants Method of classification Definition of classes

12 For Comments Only Doc:PCD3(2753)C ISO/TS 11366:2011 October 2013 DRAFT INDIAN STANDARD Petroleum and related products -- Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines Last date for comments 10 January 2014 ICS No NATIONAL FOREWORD (Formal clauses will be added later) The text of ISO Standard has been proposed to be approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. The Technical Committee has reviewed the provisions of the following International Standards referred in this adopted Standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO 3170:2004 Petroleum liquids Manual sampling ISO 3722:1976 Hydraulic fluid power Fluid sample containers Qualifying and controlling cleaning methods ISO 4021:1992 Hydraulic fluid power Particulate contamination analysis Extraction of fluid samples from lines of an operating system

13 For Comments Only Doc:PCD3(2754)C ISO/TS 11365:2011 October 2013 DRAFT INDIAN STANDARD Petroleum and related products -- Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids Last date for comments 10 January 2014 ICS No NATIONAL FOREWORD (Formal clauses will be added later) The text of ISO Standard has been proposed to be approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. The Technical Committee has reviewed the provisions of the following International Standards referred in this adopted Standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO 3170:2004 Petroleum liquids Manual sampling ISO 3722:1976 Hydraulic fluid power Fluid sample containers Qualifying and controlling cleaning methods ISO 4021:1992 Hydraulic fluid power Particulate contamination analysis Extraction of fluid samples from lines of an operating system