JSRLFLP Series. Sanitary Valves JSRLFLP Series Low FlowLow Pressure Gas Reducing Valves

Transcription

1 JSRLFLP Series Pressure Reducing Valves for Low Flow and Low Pressure Biopharmaceutical and Parenteral process Gas JSRLFLP is a high purity low flow, regulator designed and built specifically for very low pressure hygienic, SME BPE gas applications. The JSRLFLP has been designed specifically for very low pressure clean gas regulation in Stainless and Single Use Disposable applications. Whether it's precise regulation for sparging, blanketing, motive force, or SUD bag inflation, the JSRLFLP was built for the job! The durable valve body and metal trim components are machined from STM79 L SST barstock and finished to SME BPE SF, Ra micro-inch, (. Ra micrometer) electropolished as standard. The valve is outfitted with a sensitive PTFE Jorlon diaphragm and Teflon or PEEK, seats and seals that are all FD approved, USP Class VI compliant materials. These materials of construction enable JSRLFLP to withstand the rigors of an autoclave if required. Features Stable outlet pressure setpoints at very low pressure Very low set point offset (droop) especially at higher inlet pressures Top entry design facilitates in-line cleaning and maintenance Barstock construction guarantees material integrity and quality surface finish Four Cv's from. to. guarantee a valve that will fit your specific application Optimized internal volume Proprietary Jorlon diaphragm material provides exceptionally long life Soft seat material for NSI Class VI shutoff Documentation The following documentation is shipped at no charge: Steriflow Unicert: Certificate of Compliance for: - Material, including MTR s - Surface Finish - FD/USP Class VI Traceability: Each Unicert includes individual valve serial numbers, heat numbers and attached MTR s directly traceable to the valve serial number and heat numbers imprinted on all wetted metallic components. Surface Finish SME BPE SF ( Ra µin (. Ra μm), electropolished) standard for all external and wetted metal parts SME BPE SF ( Ra µin) mechanical finish, non-electropolished and other finishes available O cleaning optional pplications Ideal for low pressure regulation of gases used in bio-pharmaceutical R&D and production facilities. Designed specifically for very low pressure control in traditional Stainless Steel and Single Use Disposable installations such as: Gas overlay or motive force movement, pressure filling, Lyophilization, sparging, or SUD bag inflation. Clean Filter ir Nitrogen Carbon Dioxide rgon Oxygen Custom purge or blanket gas Steriflow by Jordan Valve 7 Wasson Road Cincinnati, OH (f) steriflow@richardsind.com Sanitary Valves JSRLFLP Series Low FlowLow Pressure Gas Reducing Valves

2 Sizes: /" (DN8), /8" (DN), /" (DN) End Connections: NPT all sizes, Tri-Clamp and Tube Weld End /"(DN) only Soft Seat Materials for NSI Class VI Shut-off PTFE to + F ( C) continuous or 7 F ( C) intermittent [not to exceed min. in a one hour period] FD, USP Class VI PEEK to + F (77 C), FD & USP Class VI Body and Trim Material STM 79 L SST Contact factory for other body/trim/seat materials Diaphragm Material: Jorlon - PTFE TM, FD & USP Class VI Maximum Inlet Pressure: Tube End & Tri-Clamp: psig (, bar) NPT: psig (, bar) Pressure at Maximum Temperature: Tube End and Tri-Clamp: F (, 77 C) with PEEK seats; F (, C) with PTFE seats NPT: F (, 77 C) with PEEK seats; F (, C) with PTFE seats Specifications Options Surface Finish: SME BPE SF, Ra, µin (, Ra, µm) electropolish standard SME BPE SF, Ra, µin, (, Ra µm), non-ep is optional, as are other finishes Maximum Pressure Drop: Tube End and Tri-Clamp: psi (, bar) NPT: psi (, bar) Spring Ranges: 7 psi (,7, bar) Flow Capacities: Cv., Cv., Cv.8, Cv. (Kv,, Kv,, Kv,9, Kv,7) Options Oxygen cleaning and certification Panel Mounting Captured Vent Self Relieving Gauge Ports, Pressure Gauger Panel Mount Option Captured Vent Option (/8" NPT) Option Definition Captured Vent The captured vent design is for maximum safety for the user when handling toxic or hazardous media. It features a /8" FNPT port located on the spring housing. The user can easily tube this vent to a safe location. This option can be incorporated into a self-relieving regulator that provides an additional port to permit the safe expulsion of hazardous media. Panel Mount The panel mount feature requires a panel cut out of -/", complete with a threaded spring housing, and a panel mount ring to secure the regulator. *Self Relieving The self relieving option is used for internal venting of downstream pressure. From a practical standpoint, it allows for immediate reduction in pressure setpoints and automatically alleviates regulator lock up. Gauge Ports - Pressure Gauge For inlet and outlet pressure gauges (and the gauges) are available as standard options --

3 nti-tamper Option corn nut cover llen/socket head stem adjustment Lock nut Internal View. djust stem position with llen wrench. Tighten lock nut against bonnet while holding stem position. Replace and tighten acorn nut DIN & ISO Tri-Clamp Dimensions D ID DIN 7 Row B (ISO 7) VLVE SIZE D ID DN.. 8. DN*.. 8. DN..9.9 * with non-standard Tri-clamp face D ID DIN 7 Row (ISO 8) VLVE SIZE D ID DN. 9.. DN*. 9.. DN... DN*... * with non-standard Tri-clamp face --

4 Reliable, gas pressure regulation at flows less than LPM and set points to psig (9 millibar) Features & Benefits utoclavable nodized luminum Knob available as cataloged option Fine thread pitch for precision setpoint adjustments. STM 79 L body, diaphragm casing, bonnet, and trim SME BPE SF, Ra µin (, Ra µm) electropolish finish is standard PTFE-Jorlon TM FD / USP Class VI approved Unsurpassed life Large diaphragm area for increased stability, and less offset at very low setpoints FD / USP Class VI seat material for NSI Class VI shutoff /" Tri-Clamp and Tube Weld Connections; /", /8" and /" NPT Flow Configurations outlet gage B outlet C inlet outlet inlet outlet inlet outlet gage inlet gage outlet gage 7 D E outlet inlet outlet inlet inlet gage * Gage ports are /" FNPT (consult factory for required alternative) Consult factory for other porting options SMPLE outlet 9 inlet --

5 Dimensions Ø.7 (,8) JSRLFLP Series with Tri-Clamp Ends, Inches VLVE SIZE /".7 /".7.9 (,). (9,) JSRLFLP Series with Tri-Clamp Ends, Metric VLVE SIZE DN, DN, JSRLFLP Series with Tube Ends, Inches VLVE SIZE /" 8.8 /" 8.8 JSRLFLP Series with Tube Ends, Metric VLVE SIZE DN,8 DN,8 JSRLFLP Series with FNPT/SW Ends, Inches VLVE SIZE /". /8". /".7 JSRLFLP Series with FNPT/SW Ends, Metric VLVE SIZE DN8,8 DN,8 DN 9,9 Cv Trim Selection Instructions. Select a graph on the following twelve pages that best represents your outlet pressure set point and flow range.. Select the inlet pressure line on the graph (horizontal sloped line, P) that reflects your application's actual inlet pressure.. That line indicates the Pressure/Flow capabilities of the Cv trim under flowing conditions --

6 Flow Coefficient:. Maximum inlet pressure: psig (, bar).8... Range Spring: -7 psig (-, bar) Set Point: psig Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi P= psi 8. P= psi P= psi P=7 psi P= psi P=7 psi P= psi P= psi P= psi..... Range Spring: -7 psig (-, bar) Set Point: psig... P= psi.. P= psi P= psi P= psi P=7 psi. P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi P= psi P= psi P= psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi. P= psi P= psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig.. P= psi P= psi. P=7 psi P= psi P= psi

7 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig. Range Spring: -7 psig (-, bar) Set Point: psig... Range Spring: -7 psig (-, bar) Set Point: psig. P=7 psi P= psi P= psi.... P= psi P= psi P=7 psi P=7 psi P= psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi P=7 psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: psig. P= psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig.. P=7 psi P= psi....

8 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig P= psi. P=7 psi Range Spring: -7 psig (-, bar) Set Point: psig Range Spring: -7 psig (-, bar) Set Point: 7 psig. P= psi. P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig 7 P= psi. P=7 psi..... Range Spring: -7 psig (-, bar) Set Point: 7 psig 8 7 P=7 psi P= psi..

9 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi P=7 psi P= psi P= psi P= psi. Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi P= psi P= psi P=7 psi P= psi... Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi P= psi P= psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig..... P= psi P= psi P=7 psi.. P= psi P= psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: psig P= psi. P=7 psi P= psi P= psi. P= psi..... Range Spring: -7 psig (-, bar) Set Point: psig... P= psi P= psi P=7 psi P= psi.8. P= psi....

10 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig.. Range Spring: -7 psig (-, bar) Set Point: psig.. P= psi P= psi P= psi P=7 psi P= psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi.. Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi P= psi.... P=7 psi. P= psi......

11 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig Range Spring: -7 psig (-, bar) Set Point: psig. P= psi P=7 psi..... Range Spring: -7 psig (-, bar) Set Point: psig P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: 7 psig P= psi P=7 psi P= psi..... Range Spring: -7 psig (-, bar) Set Point: 7 psig P=7 psi P= psi..

12 Flow Coefficient:.8 Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi P= psi. P=7 psi P= psi. P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: psig 8 P= psi P= psi 8 P= psi P= psi P= psi P=7 psi P= psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig. Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi. P= psi P= psi P=7 psi.. Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi P=7 psi P= psi. P= psi... P= psi P= psi P= psi P= psi P=7 psi P= psi

13 Flow Coefficient:.8 Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig 8 P= psi P= psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig 8 P= psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig..... Range Spring: -7 psig (-, bar) Set Point: psig 8. P= psi P= psi P= psi P=7 psi. Range Spring: -7 psig (-, bar) Set Point: psig 8. P= psi P=7 psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: psig P=7 psi P= psi P=7 psi P= psi

14 Flow Coefficient:.8 Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi... Range Spring: -7 psig (-, bar) Set Point: psig P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: 7 psig 8 P= psi Range Spring: -7 psig (-, bar) Set Point: psig 8... P=7 psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: 7 psig 8 P=7 psi P= psi

15 JSRLFLP Series Low Flow Low Pressure Reducing Valve Flow Coefficient:. Maximum inlet pressure: psig (, bar) P= psi Range Spring: -7 psig (-, bar) Set Point: psig 7 P= psi P= psi P= psi P=7 psi P= psi 8 P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi.. P= psi P= psi. P= psi P=7 psi 7 8 Range Spring: -7 psig (-, bar) Set Point: psig 9 8. P- psi P- psi P- psi P-7 psi P- psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi.. P= psi P=7 psi. P= psi P= psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi P= psi.. Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi. P= psi P= psi. P= psi P= psi P=7 psi P= psi --

16 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig 8 P= psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig 8 P= psi P=7 psi 8 P= psi Range Spring: -7 psig (-, bar) Set Point: psig.... P= psi. P=7 psi P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: psig Range Spring: -7 psig (-, bar) Set Point: psig 8 8 P- psi P- psi P-7 psi P- psi P= psi P= psi P=7 psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi P=7 psi

17 Flow Coefficient:. Maximum inlet pressure: psig (, bar) Range Spring: -7 psig (-, bar) Set Point: psig P=7 psi P= psi P= psi. P= psi Range Spring: -7 psig (-, bar) Set Point: psig P=7 psi P= psi Range Spring: -7 psig (-, bar) Set Point: 7 psig 8 8 P- psi Range Spring: -7 psig (-, bar) Set Point: psig P= psi. P=7 psi Range Spring: -7 psig (-, bar) Set Point: 7 psig P= psi P=7 psi 7 8 9

18 JSRLFLP/9/B Model Size Material / Ordering Schematic & & & 7 & 8 9 & & & 7 Model JSRLFLP Low Flow Low Pressure Reducing Valve Size /" (DN8) 8 /8" (DN) /" (DN) L Material STM 79, L & Body Feature End Connection Port Configuration FNPT, /" Port "" B FNPT, /8" B Port "B" C FNPT, /" C Port "C" T SME BPE Tri-Clamp, /" D Port "D" W SME BPE Tube Weld, /" E Port "E" S ISO Tri-Clamp, DN V ISO w/.mm face T-Clamp, DN R ISO T-Clamp, DN D DIN Tri-Clamp, DN V DIN T-Clamp, DN w/.mm face U DIN T-Clamp, DN X DIN T-Clamp, DN w/.mm face M DIN Tube Weld, DN H ISO Tube Weld, DN ZZ Non-Standard cc. to DIN 7 Row B (ISO 7). See dimensions, page cc. to DIN 7 Row (DIN 8). See dimensions, page cc. to DIN 8, DIN 8 Row cc. to DIN 8 Row B, (ISO 7) & Trim S Cv. (Kv,) S* Cv. (Kv,) S Cv.8 (Kv,9) S Cv. (Kv,7) R Cv. Self-Relieving R* CV. Self-Relieving R Cv.8 Self-Relieving R Cv. Self-Relieving ZZ Non-Standard * Though out of sequence, "S" and "R" are the correct order codes for Cv. & Seat Material - FD & USP Class VI T PTFE Cv. P PEEK Cv.8 T PTFE Cv.8 P PEEK Cv. T PTFE Cv. P PEEK Cv. T PTFE Cv. P PEEK Cv. ZZ Non-Standard 7 & 8 Range Spring / Outlet Pressure E - 7 psi E - psi ZZ Non-Standard 9 & Diaphragm Material JL Jorlon TM PTFE, FD & USP Class VI ZZ Non-Standard & ctuator SK Standard ctuator K utoclavable nodized luminum Knob available as cataloged option CV Captured Vent PM Panel Mount TP nti-tamper feature (See illustration page ) ZZ Non-Standard & Inlet Gauge - psi / bar (Dual) BB - psig / bar (Dual) CC - psig / bar (Dual) DD - psig / bar (Dual) NN None ZZ Non-Standard Outlet Gauge D - psig/bar (Dual) - psig/bar (Dual) B - psig / bar (Dual) C - psig / bar (Dual) N None Z Non-Standard SEP Compliance G SEP Compliant Ø None Z Non-Standard 7 ccessories S Clean For Oil Free X Clean For Oxygen Ø None Z Non-Standard Steriflow Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at for the latest information on our products.