Report No

Transcription

1 Certificte of Authoriztion 984 _ CREEK 175 Edinburgh Dr Tmp, FL 647 TECHNICAL SERVICES, LLC FLORIDA BUILDING CODE 5H EDITION (14) EVALUATION REPORT Mnufcturer: (81) SHEFFIELD METALS INTERNATIONAL Issued August, Evergreen Prkwy Sheffield Villge, OH 454 (800) Qulity Assurnce: Keystone Certifictions, Inc. (QUA184) SCOPE Ctegory: Roofing Subctegory: Code Sections: 14..1, 14.. Properties: Wind Resistnce REFERENCES Entity Report Stndrd Yer LIMITATIONS 1. Fire clssifiction is not within the scope of this evlution.. This report is not for use in the HVHZ.. The roof deck nd the roof deck ttchment shll be designed by others to meet the minimum design lods estblished for components nd cldding nd in ccordnce with FBC requirements. 4. Roof slope shll be in ccordnce with FBC Section Reroofing shll be in ccordnce with FBC Section Instlltion of the evluted products shll comply with this report, the FBC nd the mnufcturer's published ppliction instructions. Where discrepncies exist between these sources, the more restrictive nd FBC complint instlltion detil shll previl. 7. All products listed in this report shll be mnufctured under qulity ssurnce progrm in complince with Rule 61 G-. SM1101 FL1816 Pge 1 of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

2 Z CREEK TECHNICAL SERVICES, LLC PRODUCT DESCRIPTION SMI 1.5" Profile: Mechnicl Description: Non-structurl, mechnicl lock stnding sem roof pnel Sem 1.5 in. mechnicl sem; Mx. 16 in. coverge Mteril: Min. 4 g.; Fy = min. ksi; Shll conform with FBC Section Min. Slope: 1 /1 8- " i Lr 7 N 16' SMI 1.5" Profile: SnpLock Description: Non-structurl, snp lock stnding sem roof pnel in. snp lock sem; Mx. 19 in. coverge Mteril: Min. 4 g.; Fy = min. ksi; Shll conform with FBC Section Min. Slope: 1 /1 7/16- R 09 INSIDE - 1! r= 1 l IL L " SMI 1.75" Profile: 1.75 in. snp lock sem; Mx. 18 in. coverge SnpLock Description: Non-structurl, snp lock stnding sem roof pnel Mteril: Min. 4 g.; Fy = min. ksi; Shll conform with FBC Section Min. Slope: 1 /1 R : 9 Cr * CIO N 1,7 L 1 1 5". -1 '16-» - SM FL1816 Pge of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

3 O CREEK d TECHNICAL SERVICES, LLC SMI " Profile: Mechnicl Description: Non-structurl, mechnicl lock stnding sem roof pnel Sem.0 in. mechnicl sem; Mx. 16 in. coverge Min. 4 g.; Fy = min. ksi; Shll conform with FBC Section Mteril: Min. Slope 0.5/1 r- LEI 7 16" COMPLIANCE STATEMENT The products evluted herein by Zchry R. Priest, P.E. hve demonstrted complince with the Florid Building th Code 5 Edition (14) s evidenced in the referenced documents submitted by the nmed mnufcturer. (::/fo'e.n.6/k:+6./.:no 71.., 0.. h : V CATE' -p ch<6 16:5: C i Digitllysigned'...st * -04'00' - E':N.. STATE OF.",fUS :VA 4 + %> n.\.9..i* Zchry R. Priest, P.E. "' 8/6 NA\- Florid Registrtion 71 "..."ll'lli'.,0. Orgniztion ANE9641 CERTIFICATION OF INDEPENDENCE CREEK Technicl Services, LLC does not hve, nor will it cquire, finncil interest in ny compny mnufcturing or distributing products under this evlution. CREEK Technicl Services, LLC is not owned, operted, or controlled by ny compny mnufcturing or distributing products under this evlution. Zchry R. Priest, P.E. does not hve, nor will cquire, finncil interest in ny compny mnufcturing or distributing products under this evlution. Zchry R. Priest, P. E. does not hve, nor will cquire, finncil interest in ny other entity involved in the pprovl process of the product. APPENDICES 1) APPENDIX A - Instlltion ( pges) ) APPENDIX B - Approved Roof s ( pges) ) APPENDIX C - Design Wind Lods(4 pges) SM1101 FL1816 Pge of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

4 Z CREEK TECHNICAL SERVICES, LLC Appendix A INSTALLATION Note - Refer to the AppROVED Roof SYSTEMS section of this report for specific instlltion detils of selected system. Unless otherwise specified in this report the following instlltion detils shll be met for the nmed products: Component Product Instlltion Detil SFS Intec Wether Grd #10 Type A Shll penetrte through the shething minimum /8-inch. Shll be corrosion Pncke Hed / resistnt in ccordnce with FBC section Qudrex Drive SFS Intec Wether Fsteners Grd #1 Self-Drill: Threds shll penetrte through the deck minimum /8-inch. Shll be corrosion Pncke Hed / resistnt in ccordnce with FBC section Qudrex Drive Shll ttch insultion to steel or wood deck. Shll penetrte through the top rib SFS Intec Dekfst of the steel deck minimum %-inch. Shll penetrte through the wood shething #1 PH screws minimum 1-inch. Shll be corrosion resistnt in ccordnce with FBC section Insultion Pltes SFS Intec Glvlume Steel Hex Plte Instlled in ccordnce with the mnufcturer's instlltion instructions. Any Approved polyisocynurte insultion bord for use in the FBC. Minimum 1 Approved Insultion inch thick bse lyer with optionl minimum %-inch or tper subsequent lyers of polyisocynurte polyisocynurte insultion secured with fsteners nd pltes in ccordnce with insultion bord the mnufcturer's instlltion instructions. Butt edges nd stgger joints of djcent pnels. Underlyment Moisture/Fire Brrier ASTM D 6 Type 11 Instlled in ccordnce with the mnufcturer's instlltion instructions nd the FBC. Instlled in ccordnce with the mnufcturer's instlltion instructions nd the FBC. Butterfly Bse 1-1/" - g, G-90 glvnized steel, through fstened to deck with two () fsteners t1 R.1.f /1-=\, C=1 Clips 1-1/" Butterfly Clip Assembly.75 /\ _l /7\ Butterfly Tb 1-1/" - 4 g. G-90 glvnized steel A0 V TT. SM1101 FL1816 Pge 1 of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

5 Z CREEK TECHNICAL SERVICES, LLC Appendix A Component Product Instlltion Detil g., G-90 glvnized steel, through fstened to deck with two () fsteners..0-inch length x.01-inch width. 1-1/" SnpLock Clip j _ /5=L-ZZ=X <- -,15 18 g., G-90 glvnized steel, through fstened to deck with two () fsteners..5-inch length x.01-inch width /4" SnpLock Clip 17 Clips.18 \{ , L 15 Butterfly Bse " - 18 g, G-90 glvnized steel, through fstened to deck with two () fsteners " Butterfly Clip Assembly J5 C- 1..T. /r\ / rl SM1101 FL1816 Pge of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

6 -CREEK -1=1 TECHNICAL SERVICES, LLC Appendix A Component Product Instlltion Detil Butterfly Tb " - g. G-90 glvnized steel r.91 SM1101 FL1816 Pge of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

7 -CREEK -1=1 TECHNICAL SERVICES, LLC Appendix B APPROVED ROOF SYSTEMS The following notes shll be observed when using the ssembly tbles below. 1. Mximum Design Pressures () were clculted using :1 mrgin of sfety per FBC Section Refer to LIMITATIONS nd sections of this evlution when using the tble(s) below.. Refer to NSTALLATION SeetiOn of this report for instlltion detil when the informtion is not explicitly stted for the selected ssembly. 4. The on-center (o.c.) spcing given is the mximum llowble ttchment spcing for the rted system. 5. Unless otherwise specified, the Steel shll be designed by others in ccordnce with FBC requirements nd shll be minimum g (Fy = min. ksi) Wide Rib (Type WR) conforming to ANSI/SDI-RD1.0 & FBC. 6. Unless otherwise specified, Wood shll be designed by others in ccordnce with FBC requirements nd shll be minimum 15/-inch thick APA Spn-Rted plywood shething t mximum 4-inch spn. Roof Numbers nd Definitions 1.5MS-S# SMI 1.5" Mechnicl Sem over Steel (New or Existing) 1.5MS-W# SMI 1.5" Mechnicl Sem over Wood (New or Existing) 1.5SL-W# SMI 1.5" SnpLock 5 over Wood (New or Existing) 1.75SL-S# SMI 1.75" SnpLock over Steel (New or Existing) 1.75SL-W# SMI 1.75" SnpLock over Wood (New or Existing).OMS-S# SMI.0" Mechnicl Sem over Steel (New or Existing).OMS-W# SMI.0" Mechnicl Sem over Wood (New or Existing) Approved s for SMI 1.5" Mechnicl Sem over Steel (New or Existing) Insultion Underlyment Moisture/Fire Brrier Pnel Attchment 1-1/" Butterfly Clip Assembly 18-inches o.c. nd ttched 1.5MS-Sl Min. g. ASTM D 6 Type 11 with two () Wether Grd #1 Self-Drill: Pncke Hed / Qudrex Drive screws. Pnel is mechniclly semed degrees. Min. 1 in. Approved 1.5MS-S Min. g. polyisocynurte insultion bord SM1101 ASTM D 6 Type 11 FL /" Butterfly Clip Assembly 18-inches o.c. nd ttched with two () Dekfst #1 PH screws. Pnel is -19. mechniclly semed 180 degrees. Pge 1 of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

8 -CREEK -1=1 TECHNICAL SERVICES, LLC Appendix B Approved s for SMI 1.5" Mechnicl Sem over Wood (New or Existing) Underlyment Min. 15/" CDX Plywood ASTM D 6 Type 11 Moisture/Fire Brrier Pnel Attchment 1-1/" Butterfly Clip Assembly 4-inches o.c. nd ttched 1.5MS-Wl with two () Wether Grd #10 Type A: Pncke Hed / Qudrex Drive screws. Pnel is mechniclly semed 180 degrees. SMI 1.5" SnpLock 5 over Wood (Ngw or Existing) Underlyment Min. 15/" CDX Plywood ASTM D 6 Type SL-Wl Moisture/Fire Brrier Pnel Attchment 1-1/" SnpLock Clip 4-inches o.c. nd ttched with two () Wether Grd #10 Type A: Pncke Hed / -19. Qudrex Drive screws. Approved s for SMI 1.75" SnpLock over Ste1 (New or Existing) 1.75SL-Sl Insultion Min. g. ASTM D 6 Type 11 Min. 1 in. 1.75SL-S Min. g. Underlyment Approved polyisocynurte insultion bord SM1101 ASTM D 6 Type 11 Moisture/Fire Brrier Pnel Attchment 1-/4" SnpLock Clip 4-inches o.c. nd ttched with two () Wether Grd #1 Self-Drill: Pncke Hed / Qudrex Drive screws. 1-/4" SnpLock Clip 4-inches o.c. nd ttched with two () DekfstTM #1 PH screws. FL Pge of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

9 -CREEK -1=1 TECHNICAL SERVICES, LLC Appendix B Approved s for SMI 1.75" SnpLock over Wood (New or Existing) Underlyment Min. 15/" CDX Plywood ASTM D 6 Type SL-Wl Moisture/Fire Brrier Pnel Attchment 1-/4" SnpLock Clip 4-inches o.c. nd ttched with two () Wether Grd #10 Type A: Pncke Hed / Qudrex Drive screws. Approved s for SMI.0" Mechnicl Sem over Steel (New or Existing) Insultion Underlyment Moisture/Fire Brrier Pnel Attchment " Butterfly Clip Assembly 4-inches o.c. nd ttched with.osms-sl Min. g. ASTM D 6 Type 11 two () Wether Grd #1 Self-Drill: Pncke Hed / Qudrex Drive screws. Pnel is mechniclly semed degrees. Min. 1 in..osms-s Min. g. Approved polyisocynurte ASTM D 6 Type 11 insultion bord " Butterfly Clip Assembly 4-inches o.c. nd ttched with two () Dekfst #1 PH screws. Pnel is mechniclly semed 180 degrees. Approved s for SMI.0" Mechnicl Sem over Wood (New or Existing) Underlyment Min. 15/" CDX Plywood ASTM D 6 Type 11 Moisture/Fire Brrier Pnel Attchment with two () Wether Grd #10 Type A Pncke Hed / Qudrex Drive screws. Pnel is mechniclly semed " Butterfly Clip Assembly 4-inches o.c. nd ttched.osms-wl degrees. SM1101 FL1816 Pge of This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

10 O CREEK d TECHNICAL SERVICES, LLC Appendix C DESIGN WIND LOADS The following tbles provide design wind lods for components nd cldding in ccordnce with Section 19 of the FBC nd ASCE 7-10 under the following provisions: 1. For Hip roofs between :1 nd 5.6:1, Zone shll be treted s Zone.. Wind speeds for risk ctegory 1,11,111, nd IV buildings shll be s defined in Section 19 of the FBC.. Exposure B, C, nd D shll be s defined in section 19 of the FBC. 4. Design wind lod provided only for gble/hip roofs with roof slopes between :1 nd 6.1:1 5. All clcultions re bsed on n effective wind re of 10-fd or less. 6. Topogrphic fctors such s escrpments or hills hve been excluded from the nlysis 7. Overhngs hve been excluded from the nlysis. 8. Wind directionlity fctor, K = Vult is shown in the tbles below. Design wind lods re clculted using Vsd = VultVO.6 per Projects with men roof heights greter thn -ft shll be evluted by licensed design professionl 11. Zones 1,, nd shll be defined s shown below. Dimension "" shll be 10% of the lest horizontl dimension or (0.4 x Men Roof Height), whichever is smller, but not less thn either 4% of the lest horizontl dimension or ft HIP Gble 1 4 SM Il FL1816 Il Pge 1 of 4 This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

11 -CREEK,..U TECHNICAL SERVICES, LLC Appendix C Gble/Hip Roofs in Exposure B (Roof slope between :1 nd 6.1:1) Building Type Enclosed Bsic Wind Speed (mph) Men Zone Roof Height (ft) Prtilly Enclosed SM1101 FL1816 Pge of 4 This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

12 -CREEK,..U TECHNICAL SERVICES, LLC Appendix C Gble/Hip Roofs in Exposure C (Roof slope between :1 nd 6.1:1) Building Type Enclosed Bsic Wind Speed (mph) Men Zone Roof Height (ft) Prtilly Enclosed SM1101 FL1816 Pge of 4 This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.

13 -CREEK,..U TECHNICAL SERVICES, LLC Appendix C Gble/Hip Roofs in Exposure D (Roof slope between :1 nd 6.1:1) Building Type Enclosed Bsic Wind Speed (mph) Men Zone Roof Height (ft) Prtilly Enclosed END OF REPORT SM1101 FLl 816 Pge 4 of 4 This evlution report is provided for Stte of Florid product pprovl under Rule 61 G-. The mnufcturer shll notify CREEK Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.