Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

Transcription

1 Safety Data Sheet Ammonium Phosphate, Dibasic, Crystal, ACS 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Ammonium Phosphate, Dibasic, Crystal, ACS Synonyms/Generic Names: Diammonium Phosphate Product Number: 0545 Product Use: Industrial, Manufacturing or Laboratory use Manufacturer: Columbus Chemical Industries, Inc. N4335 Temkin Rd. Columbus, WI For More Information Call: (Monday-Friday 8:00-4:30) In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week) 2. HAZARDS IDENTIFICATION OSHA Hazards: Irritant Target Organs: None Signal Words: Warning Pictograms: GHS Classification: irritation Category 2 Eye irritation Category 2A GHS Label Elements, including precautionary statements: Hazard Statements: H315+H320 Causes skin and eye irritation. Precautionary Statements: P264 Wash hands thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact P305+P351+P338 lenses, if present and easy to do. Continue rinsing. P332+P313 If skin irritation occurs: Get medical advice/attention. Revised on 04/22/2015 Page 1 of 5

2 P337+P313 P362+P364 If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Potential Health Effects Causes eye irritation. Inhalation May be harmful if inhaled. Causes respiratory tract irritation. May be harmful if absorbed through skin. Causes skin irritation. Ingestion May be harmful if swallowed. NFPA Ratings Health 1 Flammability 0 Reactivity 0 Specific hazard HMIS Ratings Health 1 Fire 0 Reactivity 0 Personal B 3. COMPOSITION/INFORMATION ON INGREDIENTS Component Weight % CAS # Ammonium Phosphate Dibasic EINECS# / ELINCS# Formula Molecular Weight > (NH 4 ) 2 HPO g/mol 4. FIRST-AID MEASURES Inhalation Ingestion Rinse with plenty of water for at least 15 minutes and seek medical attention. Move casualty to fresh air and keep at rest. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention Flush with plenty of water for at least 15 minutes while removing contaminated clothing and wash using soap. Get medical attention. Do Not Induce Vomiting! Never give anything by mouth to an unconscious person. If conscious, wash out mouth with water. Get medical attention. 5. FIRE-FIGHTING MEASURES Suitable (and unsuitable) extinguishing media Special protective equipment and precautions for firefighters Specific hazards arising from the chemical Product is not flammable. Use appropriate media for adjacent fire. Cool containers with water. Wear self-contained, approved breathing apparatus and full protective clothing, including eye protection and boots. Emits toxic fumes (nitrogen oxides, phosphorus oxides, ammonia) under fire conditions. (See also Stability and Reactivity section) 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Environmental precautions Methods and materials for containment and cleaning up See section 8 for recommendations on the use of personal protective equipment. Prevent spillage from entering drains. Any release to the environment may be subject to federal/national or local reporting requirements. Sweep up and arrange spill without creating dust. Pick up and place in suitable, closed containers for disposal. Clean surfaces thoroughly with water to remove residual contamination. Dispose of all waste and cleanup materials in accordance with regulations. Revised on 04/22/2015 Page 2 of 5

3 7. HANDLING AND STORAGE Precautions for safe handling See section 8 for recommendations on the use of personal protective equipment. Use with adequate ventilation. Wash thoroughly after using. Keep container closed when not in use. Avoid formation of dusts. Conditions for safe storage, including any incompatibilities Store in cool, dry well ventilated area. Keep away from incompatible materials (see section 10 for incompatibilities). 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Occupational exposure controls: Contains no substances with occupational exposure limit values. Personal Protection Wear chemical safety glasses or goggles. Inhalation Provide local exhaust, preferably mechanical. If exposure levels are excessive, use an approved respirator. Wear nitrile or rubber gloves, apron or lab coat. Other Other Recommendations Provide eyewash stations, quick-drench showers and washing facilities accessible to areas of use and handling. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance (physical state, color, etc.) White, crystalline solid. Odor Odor threshold ph Melting point/freezing point Decomposes. Initial boiling point and boiling range Flash point Not Flammable Evaporation rate Flammability (solid, gas) Not Flammable Upper/lower flammability or explosive limit Not Explosive Vapor pressure Vapor density Relative density 1.62 g/cm 3 Solubility (ies) Soluble in cold water. Partition coefficient: n-octanol/water Auto-ignition temperature Decomposition temperature 10. STABILITY AND REACTIVITY Chemical Stability Possibility of Hazardous Reactions Conditions to Avoid Incompatible Materials Hazardous Decomposition Products Stable Will not occur. Strong oxidizing agents, strong acids, strong bases, magnesium. Nitrogen oxides, phosphorus oxides, ammonia. Revised on 04/22/2015 Page 3 of 5

4 11. TOXICOLOGICAL INFORMATION Acute Toxicity Ammonium Phosphate, Dibasic LD50 Dermal Rabbit 7,950 mg/kg Respiratory Ingestion LD50 Oral Rat 6,500 mg/kg Carcinogenicity IARC ACGIH NTP OSHA as probable, possible or confirmed human carcinogen by IARC. as a carcinogen or potential carcinogen by ACGIH. as a known or anticipated carcinogen by NTP. as a carcinogen or potential carcinogen by OSHA. Signs & Symptoms of Exposure Itching, redness, swelling. Irritation, redness, watering eyes. Respiratory Irritation of mucous membranes and upper respiratory tract, coughing, wheezing. Ingestion Nausea, diarrhea, tremor, coma, seizure, mydriasis. Chronic Toxicity Teratogenicity Mutagenicity Embryotoxicity Specific Target Organ Toxicity Reproductive Toxicity Respiratory/ Sensitization 12. ECOLOGICAL INFORMATION Ecotoxicity Ammonium Phosphate, Dibasic Aquatic Vertebrate LC50 Oncorhynchus mykiss 26.5 mg/l 96hr Flow-through test LC50 - Oncorhynchus mykiss mg/l 96hr LC50 Pimephales promelas 33 mg/l 96hr Static test LC50 - Pimephales promelas 33 mg/l 96hr Aquatic Invertebrate Terrestrial Persistence and Degradability Bioaccumulative Potential Mobility in Soil PBT and vpvb Assessment Other Adverse Effects Possibly hazardous short term degradation products are not likely. Long term degradation products may arise. Very toxic to aquatic life. Revised on 04/22/2015 Page 4 of 5

5 13. DISPOSAL CONSIDERATIONS Waste Product or Residues Product Containers Users should review their operations in terms of the applicable federal/national or local regulations and consult with appropriate regulatory agencies if necessary before disposing of waste product or residue. Users should review their operations in terms of the applicable federal/national or local regulations and consult with appropriate regulatory agencies if necessary before disposing of waste product container. The information offered in section 13 is for the product as shipped. Use and/or alterations to the product may significantly change the characteristics of the material and alter the waste classification and proper disposal methods. 14. TRANSPORTATION INFORMATION US DOT TDG IMDG Marine Pollutant IATA/ICAO No 15. REGULATORY INFORMATION TSCA Inventory Status DSCL (EEC) California Proposition 65 SARA 302 SARA 304 SARA 311 SARA 312 SARA 313 WHMIS Canada All ingredients are listed on the TSCA inventory. All ingredients are listed on the DSCL inventory. No SARA Hazard No SARA Hazard Listed: Diammonium hydrogenorthophosphate Class D-2A: Material causing other toxic effects (VERY TOXIC). 16. OTHER INFORMATION Revision Date Revision Revision 2 07/31/2013 Revision 3 04/22/2015 Disclaimer: Columbus Chemical Industries, Inc. ( Columbus ) believes that the information herein is factual but is not intended to be all inclusive. The information relates only to the specific material designated and does not relate to its use in combination with other materials or its use as to any particular process. Because safety standards and regulations are subject to change and because Columbus has no continuing control over the material, those handling, storing or using the material should satisfy themselves that they have current information regarding the particular way the material is handled, stored or used and that the same is done in accordance with federal, state and local law. COLUMBUS MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING (WITHOUT LIMITATION) WARRANTIES WITH RESPECT TO THE COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED HEREIN OR WITH RESPECT TO FITNESS FOR ANY PARTICULAR USE. Revised on 04/22/2015 Page 5 of 5