Commercial Reverse Osmosis Systems and Accessories

Transcription

1 Section 10 Commercial Reverse Osmosis Systems and Accessories

2 R13 Compact Wall Mount RO Commercial Reverse Osmosis Systems And Accessories 249

3 Commercial Reverse Osmosis Systems And Accessories Specifications R4X40 Series Whole House RO Three models for flow rates up to 6,600 GPD Membrane Size 4 x 40 Average membrane rejection 98 % Feed Water Connection 3/4" NPTF Prefilter 2.5 x 20 Product Water Connection 5/8" tubing OD Reject Water Connection 5/8" tubing OD Feed Water Pressure (minimum) 10 psi Electrical Requirement * 120 VAC 60 Hz Models Model: R4X40-1 Standard features Powder coated steel frame Inlet solenoid valve 20 prefilter Prefilter pressure gauge Multistage centrifugal pump Low-pressure protection with microprocessor auto reset 2 1/2 liquid filled pump pressure gauge Stainless steel pressure vessel(s) Product flow meter Reject flow meter Concentrate needle valve Non metallic recycle needle valve Feed water and product water TDS monitor Applications Whole house Boiler feed water Humidifiers Options Greenhouses Process Water Electronics Part Number Description R2353-SD Product float switch R gal tank whole house option* R gal tank whole house option* R gal tank whole house option* *Includes atmospheric storage tank, product float switch, and repressure pump with built in controls. Note: For indoor installation only. R4X40-1 R4X40-2 R4X40-3 Maximum Productivity (gallons per day) Recovery (user adjustable) % 25 75% % Number Of Membranes Feed Water Required (maximum) 10gpm 12 gpm 14 gpm Drain Required (maximum) 10gpm 12 gpm 14 gpm Motor Horse Power 3/ /2 Electrical Requirement* 15 amps 20 amps 25 amps Dimensions W x D x H 20 x 20 x x 20 x x 26 x 50 Shipping Weight (estimated lbs) Notes: Maximum production based on a feed water of 77 F, SDI < 1, 1000 ppm TDS, and ph 7. Individual membrane productivity may vary (± 15%). May be operated on other feed waters with reduced capacity. Percent Rejection is based on membrane manufactures specifications; overall system percent rejection may be less. *R4X40-3 is available only in 230-volt single phase. 250

4 R12 Series Wall-Mounted RO Systems R system with optional legs Compact, wall-mounted systems Four models for flow rates to 1200 GPD. Standard features (package #1) Stainless steel frame Automatic inlet valve Pre-filter housing and cartridge, 10" Procon pump (brass) 1/2 HP motor Liquid filled pump pressure gauge (2-1/2") Stainless steel pressure vessels Needle valve for concentrate line Needle valve for recycle line Check valve for product water (stainless steel) Product pressure switch with Auto/Off Low-pressure shut-off with automatic restart Additional features included in package #2 Pre-filter pressure gauges Product water flow meter Reject water flow meter Additional features included in package #3 Automatic fast flush for concentrate Commercial Reverse Osmosis Systems And Accessories *Includes 300 gallon tank, product water float switch and repressurization pump with built-in controls. Notes: Performance specifications are based on 77 F feed water, 3 SDI or less, TDS below 1000 and ph of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro FPMB5-978 melt blown cartridge. Systems are designed for use with municipal and well water. 251

5 Commercial Reverse Osmosis Systems And Accessories R14 Series Wall-Mounted RO Systems R14-03-BWM System Compact, wall-mounted systems Three models for flow rates to 5400 GPD, available with brass and stainless steel fittings. Fully assembled and ready for installation. Standard features Stainless steel frame Stainless steel pressure vessels Pre-filter housing and cartridge, 10" Full-Flow Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with automatic restart Tank level input Pretreatment interlock input Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge (liquid filled) Flow meter for product water Flow meter for reject water Check valve for product water Sample valve for product water On / off switch Notes: Performance specifications are based on 77 F feed water, 3 SDI or less, TDS below 1000 and ph of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro FPMB-BB5-10 melt blown cartridge. Systems are designed for use with municipal and well water. 252

6 R14 Series Floor Model RO Systems R System Top quality, attractively priced, fully assembled RO systems Five models for flow rates to 10,800 GPD. Select the features you want to meet your requirements! Standard features (package #1) Powder coated steel frame Stainless steel pressure vessels Pre-filter housing and cartridge (20" Full-Flow) Webtrol heavy-duty multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with automatic restart Tank level input Pretreatment interlock input Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge (liquid filled) Flow meter for product water Flow meter for reject water Flow meter for recycle water Check valve for product water On / off switch Additional features included with package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Commercial Reverse Osmosis Systems And Accessories Notes: Performance specifications are based on 77 F feed water, 3 SDI or less, TDS below 1000 and ph of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro FPMB-BB5-20 melt blown cartridge. Systems are designed for use with municipal and well water. 253

7 Commercial Reverse Osmosis Systems And Accessories R24 Series Commercial RO Systems Three models and two design options for flow rates up to 15 GPM. Powder coated steel frame FRP multi-port pressure vessels Pre-filter housing and cartridge (20 B-B) Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with auto restart Tank level input Pretreatment interlock input Standard features (package #1) Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge Flow meter for product water Flow meter for reject water Flow meter for recycle water Check valve for product water Sample valves for product water On / off switch Additional features included with package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Notes: Performance specifications are based on 77 F feed water, 3 SDI or less, TDS below 1000 and ph of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is 20 Full-Flow plastic housing and Flow-Pro FPMB-BB5-20 melt blown filter cartridge. Systems are designed for use with municipal and well water 254

8 R44 Series Commercial RO Systems Three models and two design options for flow rates up to 30 GPM. Powder coated steel frame FRP multi-port pressure vessels Stainless steel pre-filter and cartridges Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with auto restart Tank level input Pretreatment interlock input Standard features (package #1) Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge Flow meter for product water Flow meter for reject water Flow meter for recycle water Check valve for product water Sample valves for product water On / off switch Commercial Reverse Osmosis Systems And Accessories Additional features included with package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Notes: Performance specifications are based on 77 F feed water, 3 SDI or less, TDS below 1000 and ph of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Max FM4X3 filter housing, constructed using 316 stainless steel and 2" MNPT pipe fittings and Flow-Pro FPMB5-30 melt blown filter cartridges. Systems are designed for use with municipal and well water. 255

9 Commercial Reverse Osmosis Systems And Accessories R48 Series Commercial RO Systems Powder coated steel frame FRP multi-port pressure vessels Stainless steel pre-filter and cartridges Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with auto restart Tank level input Pretreatment interlock input Four models for flow rates up to 100 GPM. Standard features ` Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge Flow meter for product water Flow meter for reject water Flow meter for recycle water Check valve for product water Sample valves for product water On / off switch Additional features included R48 systems CI-2000 electronic controller with feed and product water conductivity meter with percent rejection Programmable concentrate auto flush 198"x42"x72" 198"x42"x72" 198"x42"x72" R "x42"x72" Notes: Performance specifications are based on 77 F feed water, 3 SDI or less, TDS below 1000 and ph of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Max FM7x4 filter housing, constructed using 316 stainless steel and 2" MNPT pipe fittings and Flow-Pro FPMB5-40 melt blown filter cartridges. Systems are designed for use with municipal and well water. 256

10 257 Commercial Reverse Osmosis Systems And Accessories

11 Commercial Reverse Osmosis Systems And Accessories Commercial RO Membranes Top quality membranes for commercial reverse osmosis systems. Watts commercial membranes Part Number Application O.D. Length Capacity No. Per (GPD) Case W-2521-TW Tap water 2-1/2" 21" W-2540-TW Tap water 2-1/2" 40" W-4021-TW Tap water 4" 21" 1,050 1 W-4040-TW Tap water 4" 40" 2,200 1 W-4040-BW Brackish water 4" 40" 2,200 1 Note: Watts commercial membranes are packaged in preservatives. Keep in cool environment if stored for prolonged periods of time. Watts membrane specifications Data W-2521-TW W-2540-TW W-4021-TW W-4040-TW W-4040-BW Membrane type TFC TFC TFC TFC TFC Material Polyamide Polyamide Polyamide Polyamide Polyamide Charge Negative Negative Negative Negative Negative Configuration Spiral-wound Spiral-wound Sprial-wound Spiral-wound Sprial-wound Salt rejection 99.5% 99.5% 99.5% 99.5% 99.5% Max. operating temp. 113 F / 45 C 113 F / 45 C 113 F / 45 C 113 F / 45 C 113 F / 45 C Max. operating pressure 400 psi 400 psi 400 psi 400 psi 600 psi Maximum turbidity (NTU) <1 <1 <1 <1 <1 Max. SDI <5 <5 <5 <5 <5 ph range (cleaning) Flux (GPD) ,050 2,200 2,200 Note: Tap water membrane specifications are based on 225 psi pressure and 77 F temperature. Filmtec by Dow commercial membranes for tap water Part Number Application O.D. Length Capacity (GPD) No. Per Case TW Tap water 2-1/2" 14" TW Tap water 2-1/2" 21" TW Tap water 2-1/2" 40" TW Tap water 4" 14" TW Tap water 4" 21" TW Tap water 4" 40" 2,200 1 Note: Specifications are based on 225 psi pressure and 77 F temperature. Commercial membranes for brackish water Part Number Application O.D. Length Capacity (GPD) No. Per Case BW Brackish water 2-1/2" 40" BW Brackish water 4" 40" 2,200 1 BW Brackish water 8" 40" 10,500 1 Note: Brackish water membrane specifications are based on 225 psi pressure and 77 F temperature. Filmtec by Dow commercial membranes for sea water Part Number Application O.D. Length Capacity (GPD) No. Per Case SW Sea water 2-1/2" 14" SW Sea water 2-1/2" 21" SW Sea water 2-1/2" 40" SW Sea water 4" 21" SW Sea water 4" 40" 1,500 1 SW Sea water 8" 40" 6,

12 Filmtec Commercial Membranes TW #MM XLE-2540 #MM XLE-4021 #MM TW3O-2521 #MM TW3O-2514 NumberMM Tapwater elements Membrane cut-a-way for quality you can see! Commercial Reverse Osmosis Systems And Accessories TGI Part Number Filmtec Number GPD Size Case Qty MM TW GPD 2"X26" 1 MM TW GPD 2.5"X14" 1 MM TW GPD@225PSI 2.5"X21" 1 MM TW GPD@225PSI 2.5"X40" 1 MM TW GPD 4"X14" 1 MM TW GPD 4"X21" 1 MM TW GPD 4"X40" 1 MM-2521-XLE XLE GPD 2.5"X21" 1 MM-2540-XLE XLE GPD 2.5"X40" 1 MM-4021-XLE XLE GPD 4"X21" 1 MM-4040-XLE XLE GPD 4"X40" 1 Brackish water elements TGI Part Number Filmtec Number GPD Size Case Qty MM-BW BW GPD 2.5"X40" 1 MM-BW LE BW30LE GPD 4"X40" 1 MM-BW BW GPD 4"X40" 1 MM-BW BW GPD 8"X40" 1 MM-BW BW GPD 8"X40 1 MM-BW30LE-440 BW30LE GPD 8"X40" 1 259

13 Commercial Reverse Osmosis Systems And Accessories Commercial Membrane Housings 4" Fiberglass 8" Fiberglass Stainless Steel Fiberglass membrane housings Part Number Diameter Length Port PSI No. / Case R9662-1C5C7C 4 80 See Drawing R9662-1C6A 4 80 See Drawing R9662-2C3C7C 4 80 See Drawing R9662-3C5C 4 80 See Drawing R9664-1C2A5C See Drawing R9664-2A5C7C See Drawing R9664-2A7C See Drawing R9664-3C5C7C8C See Drawing R9668-1E2D5E See Drawing R9668-2E3E7E See Drawing R9688-3E5E6E7E See Drawing R9668-3E5E7E See Drawing Stainless steel membrane housings 2.5" stainless steel membrane housing Part Number Material Diameter Length Port PSI No. / Case R9677-SV SS /2 Side X 3/8 End R9677-SV SS ½ Side X 3/8 End R9677-SV SS ½ Side X 3/8 End R9677-SV SS 4 40 ¾ Side X ½ End R96-PV-4040-OS 304 SS 4 40 ¾ Side X 3/8 End Side port sizes A = 3/4" FNPT C = 1" Victaulic D = 1.5" Victaulic E = 2" Victaulic Note: Use this diagram and the port sizing chart at left to locate port locations and sizes, by referring to the product codes listed above. 260

14 RO Pumps & Aquatec Pump Accessories Procon RO Pumps Part Number Series Type Material Flow Connector No. Per Case PU-112A015 2 Clamp on Brass 15 3/8" 1 PU102A-35 2 Clamp on Brass 35 3/8" 1 PU-112A-50 2 Clamp on Brass 50 3/8" 1 PU-102A080F11XX 2 Clamp on Brass 80 3/8" 1 PU-102A100F11XX 2 Clamp on Brass 100 3/8" 1 PU-102A125F11XX 2 Clamp on Brass 125 3/8" 1 PU-102A 2 Clamp on Brass 140 3/8" 1 PU-112A140F11XX 3 Clamp on Stainless Steel 140 3/8" 1 PU-103A100F31XX 3 Clamp on Stainless Steel 100 3/8" 1 PU-103A125F31XX 3 Clamp on Stainless Steel 125 3/8" 1 PU-104B190F11XX 4 Clamp on Brass 190 1/2" 1 PU-114B190F11AA 4 Clamp on Brass 190 1/2" 1 PU-114B240F31XX 4 Clamp on Brass 240 1/2" 1 PU-114E240F31XX 4 Bolt on Brass 240 1/2" 1 PU-105B190F31XX 5 Clamp on Stainless Steel 190 1/2" 1 PU F31XX 5 Bolt on Stainless Steel 215 1/2" 1 PU-112A-CL Pump clamp (#1113) PU-112AO-1/3 GE motor (#H450) 1/3 HP, 230V PU-112A-MO12 GE motor (#H684) 1/2 HP, 115V / 230V Aquatec booster pump accessories Part Number Description No. Per Case PU-6000ESO Electric Shutoff Valve(ESO)for CDP 6800 Pump 24VAC 1 PU-8800ESO-38 (98A1004N) Electric Shut Off Valve (ESO) 3/8"NPT 24VAC 1 PU-6000LPS Aquatec Low Pressure Switch for CDP PU-6000TSO (PSW240-00) Aquatec Tank Shut Off Valve for CDP /4"JG 1 PU-6000TSO38 (PSW340)Aquatec Tank Shut Off Valve 3/8"Jg 40PSI 1 PU-6000TSO3860 (PSW360)Aquatec TSO 3/8"JG With 60 PSI Shut Off 1 PU-8010TSO ( )Shur Flo Tank Switch W/Wire 1/4"JG Fittings 1 PU-6800AFR/300 (AFR603)Aquatec Auto Flush Timer 300ML/Min. 1 PU-6800AFR/400 (AFR604)Auqatec Auto Flush Timer 400ML/Min. 1 PU-6800AFR/500 (AFR605)Aquatec Auto Flush Timer 500ML/Min. 1 PU-6800AFR (ARF608)Aquatec Auto Flush Timer 800ML/Min. 1 PU-TLC-DC900 (TLC-DC900)Tank Level Control Switch Valve DC 1 PU-TLC-WIRE ( )TLC Wire Red, Green, Black 1 PU-WIRE-LPP (SPT03) LPP Wire Hardness 6" Tee Male/Female Connector 2 White Connectors and 2 Plugs 1 PU-WIRE Pump Wire for ESO Branch Tee Connector 3 White Connectors 1 PU-WIRE/2M Pump Transformer "T" Connector W/2 Male Branches 1 Commercial Reverse Osmosis Systems And Accessories Aquatec pump repair kits Part Number Description No. Per Case PU-550UHA (UHA-4-1F12J526)Upper Housing Assembly for PU PU-550LHA (LHA-4-1F12J526)Lower Housing Assembly for PU PU-6800LHA Lower Housing Assembly (#5-7) for 6800 Pump 1 PU-6800UHA Upper Housing Assembly (#8-12) for 6800 Pump 1 PU-6800VHA Valve Housing Assembly (#13-23) for 6800 Pump 1 PU-8800DAI Lower Housing Assembly for 8800 Pump 1 PU-88HEAD (88-11)8800 Pump Head Assembly 1 261

15 Commercial Reverse Osmosis Systems And Accessories Blue-White Flowmeters F-400 Series F-440 Series F-410N Series F-410N Series F-452 Series Standard flowmeters for liquid with 316 ss guide rods Part No. BW Part No. Series GPM Connection Adapter Material Float Material R5126 F-40375LN-6 F-400N 0.1 to 1.0 3/8 Polypropylene PVC R5127 F-40375LN-8 F-400N 0.1 to 1.0 1/2 Polypropylene PVC R5129 F-40376LN-8 F-400N 0.2 to 2.0 1/2 Polypropylene 316 SS R5131 F-40377LN-8 F-400N 0.3 to 3.0 1/2 Polypropylene 316 SS R5138 F-40500LN-8 F-400N 0.5 to 5.0 1/2 Polypropylene 316 SS R5139 F-40750LN-12 F-410N 1 to 10 3/4 Polypropylene 316 SS R5140 F-40750LN-16 F-410N 1 to 10 1 Polypropylene 316 SS R5141 F-41017LN-12 F-410N 1 to 17 3/4 Polypropylene 316 SS R5142 F-41017LN-16 F-410N 1 to 17 1 Polypropylene 316 SS R5143 F-41000LN-12 F-410N 2 to 20 3/4 Polypropylene 316 SS R5144 F-41000LN-16 F-410N 2 to 20 1 Polypropylene 316 SS R5150 F-44250LH-8 F to.250 1/2 Polysulfone PVC R5152 F-44375LH-8 F to 1.0 1/2 Polysulfone 316 SS R5153 F-44376LH-6 F to 2.0 3/8 Polysulfone 316 SS R5154 F-44376LH-8 F to 2.0 1/2 Polysulfone 316 SS R5155 F-44500LH-6 F to 5.0 3/8 Polysulfone 316 SS R5156 F-44500LH-8 F to 5.0 1/2 Polysulfone 316 SS R5157 F-44750LH-12 F to /4 Polysulfone 316 SS R5395 F LHN F to 10 1 Polysulfone 316 SS R5396 F LHN F to 20 1 Polysulfone 316 SS R5397 F LHN F to 30 1 Polysulfone 316 SS R5398 F LHN F to 40 1 Polysulfone 316 SS R5406 F LHN F-452N 2 to 20 2" FNPT Polysulfone Teflon R5408 F LHN F-452N 6 to 60 2" FNPT Polysulfone 316 SS R5409 F LHN F-452N 8 to 80 2" FNPT Polysulfone 316 SS R5410 F LHN F-452N 6 to 100 2" FNPT Polysulfone 316 SS R5411 F LHN F-452N 20 to 130 2" FNPT Polysulfone 316 SS 262

16 263 Commercial Reverse Osmosis Systems And Accessories

17 Accessories for Commercial RO Systems Liquid level controls, pressure switches & metal pressure tanks. Liquid level controls Float switch used with atmospheric storage tanks to shut-off system when tank is full. Part Number L75222 Description Control with single stage suction and 1/2" NPT PP fittings. Important: Install level control so the float will hinge upward (as shown). Not downward. Pressure switch Used with bladder pressure tanks to shut-off system with tank is full. Part Number U217-2E Description Switch pre-set psi with 1/4" NPT fittings. 264