Revision Date 01/04/2017 REVISION NUMBER: 4 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION

Size: px
Start display at page:

Download "Revision Date 01/04/2017 REVISION NUMBER: 4 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING 2. HAZARDS IDENTIFICATION"

Transcription

1 SAFETY DATA SHEET Revision Date 01/04/2017 REVISION NUMBER: 4 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product identifier Product name NATURAL SHINE Other means of identification Product code Synonyms NONE Recommended use of the chemical and restrictions on use Recommended Use Cleaning agent. Uses advised against Details of the supplier of the safety data sheet Manufacturer Address Rochester Midland Corporation 155 Paragon Drive Rochester, New York USA Emergency telephone number EMERGENCY TELEPHONE INFOTRAC: OUTSIDE U.S.: CANUTEC: Importer Rochester Midland Canada Corporation 5353 John Lucas Drive Suite 103 Burlington, ON L7L 6G5 Canada Classification 2. HAZARDS IDENTIFICATION Regulatory Status This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR ) This chemical is not considered hazardous by the WHMIS 2015 Hazardous Products Regulation. t a dangerous substance or mixture according to the Globally Harmonized System (GHS) Label elements Emergency Overview The product contains no substances which at their given concentration, are considered to be hazardous to health Appearance Clear Yellow Physical state Liquid Odor Mild Hazards not otherwise classified (HNOC) Other Information Maybeharmfulifswalowed Harmfultoaquaticlifewithlonglastingefects. Page 1 of 7

2 3. COMPOSITION/INFORMATION ON INGREDIENTS The product contains no substances which at their given concentration, are considered to be hazardous to health. First aid measures 4. FIRST AID MEASURES General advice Eye contact Skin contact Inhalation Ingestion hazards which require special first aid measures. IF IN EYES: Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician. IF ON SKIN: Wash with soap and water. IF INHALED: Remove to fresh air. IF SWALLOWED: Clean mouth with water and drink afterwards plenty of water. Most important symptoms and effects, both acute and delayed Symptoms. Indication of any immediate medical attention and special treatment needed te to physicians Treat symptomatically. Suitable extinguishing media Dry chemical, CO2, water spray or regular foam. 5. FIRE-FIGHTING MEASURES Unsuitable extinguishing media Caution: Use of water spray when fighting fire may be inefficient. Specific hazards arising from the chemical. Explosion data Sensitivity to Mechanical Impact NONE. Sensitivity to Static Discharge NONE. Protective equipment and precautions for firefighters Firefighters should be equipped with self-contained breathing apparatus and turn out gear. Cool exposed containers with water spray. 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal precautions Ensure adequate ventilation, especially in confined areas. Environmental precautions Environmental precautions See Section 12 for additional ecological information. Methods and material for containment and cleaning up Methods for containment Prevent further leakage or spillage if safe to do so. Page 2 of 7

3 Methods for cleaning up Dike to contain. Pick up with absorbant material. Put in suitable container for disposal. 7. HANDLING AND STORAGE Precautions for safe handling Advice on safe handling Keep out of reach of children. Conditions for safe storage, including any incompatibilities Storage Conditions Incompatible materials Keep containers tightly closed in a dry, cool and well-ventilated place. Keep/store only in original container. Do not reuse container. Do not store near heat. Do not store near oxidizing agents. Strong acids, bases and oxidizing agents. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Exposure Guidelines Appropriate engineering controls ENGINEERING CONTROLS This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. General mechanical and/or local exhaust as needed to meet exposure limits if mist in air. Required when spraying large amounts or applying in confined area. Individual protection measures, such as personal protective equipment Eye/face protection Skin and body protection RESPIRATORY PROTECTION General Hygiene Considerations Safety glasses are recommended to minimize eye contact. Solvent resistant material such as Viton, neoprene or nitrile rubber. Appropriate protective clothing as needed to prevent skin contact. It is the responsibility of the end user of this product to determine level of PPE required that is consistent with safe use of this product. t normally required. If mist or vapors in air exceed exposure limit, use NIOSH approved organic vapor respirator. Handle in accordance with good industrial hygiene and safety practice. Information on basic physical and chemical properties 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state Liquid Appearance Clear Yellow Odor Mild Color Odor threshold Property Values Remarks Method ph 7.0 (10% in water) Melting point/freezing point Boiling point / boiling range > 260 C / 500 F Flash point C / 425 F Evaporation rate Flammability (solid, gas) Flammability Limit in Air Upper flammability limit: Lower flammability limit: Vapor pressure Vapor density Specific gravity Water solubility Emulsifies Page 3 of 7

4 Solubility in other solvents Partition coefficient Autoignition temperature Decomposition temperature Kinematic viscosity Dynamic viscosity Explosive properties Oxidizing properties Other Information Softening point VOC (EPA METH.24) (G/L): 26.1 Density 7.27 lbs./gal (0.87 kg/l) Bulk density REACTIVITY data available 10. STABILITY AND REACTIVITY Chemical stability Stable under recommended storage conditions. Possibility of Hazardous Reactions ne under normal processing. CONDITIONS TO AVOID Keep away from heat, sparks, and flame. Incompatible materials Strong acids, bases and oxidizing agents. Hazardous Decomposition Products Incomplete combustion produces:. Carbon Monoxide. Information on likely routes of exposure 11. TOXICOLOGICAL INFORMATION Product Information Inhalation Eye contact Skin contact Ingestion May be harmful if swallowed. May cause irritation of respiratory tract. May cause slight irritation. Prolonged contact may lead to irritation and dermatitis. Large amounts may cause irritation, nausea, diarrhea. May be harmful if swallowed. Information on toxicological effects Symptoms. Delayed and immediate effects as well as chronic effects from short and long-term exposure Sensitization Germ cell mutagenicity Carcinogenicity Reproductive Toxicity.... Page 4 of 7

5 STOT - single exposure STOT - repeated exposure Aspiration hazard... Numerical measures of toxicity - Product Information The following values are calculated based on chapter 3.1 of the GHS document. ATEmix (oral) 2035 mg/kg Ecotoxicity Harmful to aquatic life with long lasting effects. 12. ECOLOGICAL INFORMATION 98.62% of the mixture consists of components(s) of unknown hazards to the aquatic environment Persistence and degradability. Bioaccumulation. Other adverse effects 13. DISPOSAL CONSIDERATIONS Waste treatment methods Disposal of wastes Contaminated packaging Disposal should be in accordance with applicable regional, national and local laws and regulations. Do not reuse container. 14. TRANSPORT INFORMATION DEPT. OF TRANSPORTATION Proper shipping name t Regulated by DOT TDG t Regulated 15. REGULATORY INFORMATION International Inventories TSCA DSL/NDSL EINECS/ELINCS ENCS Does not Comply IECSC KECL Page 5 of 7

6 PICCS AICS Legend: TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/n-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of tified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances PICCS - Philippines Inventory of Chemicals and Chemical Substances AICS - Australian Inventory of Chemical Substances US Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372 SARA 311/312 Hazard Categories ACUTE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD Sudden release of pressure hazard REACTIVE HAZARD CWA (Clean Water Act) This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR and 40 CFR ) CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material US State Regulations California Proposition 65 This product does not contain any Proposition 65 chemicals U.S. State Right-to-Know Regulations U.S. EPA Label Information EPA Pesticide Registration Number t applicable NFPA Health hazards 1 Flammability 1 Instability 0 Physical and Chemical Properties - HMIS Health hazards 1 Flammability 1 Physical hazards 0 Personal protection B Prepared By EH&S DEPARTMENT Revision Date 01/04/2017 Revision te 16. OTHER INFORMATION Page 6 of 7

7 Minor revisions for Canadian GHS compliance. Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. *** END OF SDS *** Page 7 of 7