1. Identification of the substance/preparation and of the company/undertaking THIOPLAST EPS 25

Transcription

1 Akzo Nobel Functional Chemicals GmbH & Co. KG Safety Data Sheet according to Regulation (EU) No. 107/ Identification of the substance/preparation and of the company/undertaking Identification of the substance or preparation: Use of the substance/preparation: Basic polymer and reactive thinner for coatings, adhesives and sealants. Company/undertaking identification Company name: Akzo Nobel Functional Chemicals GmbH & Co. KG Street: Liebigstraße 7 Place: D-0773 Greiz Telephone: Telefax: Contact person: Regulatory Affairs Greiz regulatory.affairsgreiz@akzonobel.com Emergency telephone: Inquiry office: Giftinformationszentrum Erfurt 2. Hazards identification Classification: Indications of danger : Irritant, Dangerous for the environment R-phrases : Irritating to eyes and skin. May cause sensitization by skin contact. Toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. 3. Composition/information on ingredients Chemical characterization: ( substance ) Hazardous components Chemical name CAS-No. EC-No. Classification Quantity Liquid polysulphide polymer with epoxy end groups Xi, N R36/ % Full text of each relevant R phrase can be found in heading First aid measures General information: After inhalation: After contact with skin: After contact with eyes: After ingestion: Advice to doctor: Medical advice absolutely requred! Move victim to fresh air. Put victim at rest and keep warm. In case of irritation of the respiratory tract seek medical advice. After contact with skin, wash immediately with plenty of Water and soap. In case of skin irritation, seek medical treatment. Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Consult an opthalmologist. Rinse mouth immediately and drink large quantities of water. Treat symptomatically. Page 1 of 6

2 Safety Data Sheet according to Regulation (EU) No. 107/ Fire-fighting measures Suitable extinguishing media: Extinguishing media which must not be used for safety reasons: Special exposure hazards arising from substance or preparation itself, combustion products, resulting gases: Special protective equipment for fire-fighters: Additional information: Carbon dioxide (CO2). Foam. Extinguishing powder. Water spray. Atomized water. High power water jet. Sulfur oxides. Hydrogen sulphide (H2S). Formaldehyde. In case of fire: Wear self-contained breathing apparatus. Wear chemical resistant suit. Contaminated fire-fighting water must be collected separately. Do not empty into drains or the aquatic environment. 6. Accidental release measures Personal precautions: Environmental precautions: Methods for cleaning up/taking up: Wear personal protection equipment. Avoid contact with skin and eyes. Do not empty into drains or the aquatic environment. Suitable absorbing material: Sand, Kieselguhr. 7. Handling and storage Handling Advice on safe handling: Storage Requirements for storage rooms and vessels: Further information on storage conditions: In case of open handling equipment with built-in suction must be used. It is recommended to organise all working processes in order to exclude the following: skin contact. Eye contact. Working areas must be arranged in such a manner that they can be cleaned at all times. Keep container tightly closed in a cool, well-ventilated place. Do not empty into drains or the aquatic environment. Keep away from food, drink and animal feedingstuffs. 8. Exposure controls/personal protection Exposure limit values Exposure controls Protective and hygiene measures: Hand protection: Wash hands before breaks and at the end of work. Do not eat, drink, smoke or sneeze at the workplace. Tested protective gloves are to be worn: German Industry Norms (DIN) / European Norms (EN): EN 420 FKM (Fluoroelastomer (Viton)). CR (polychloroprenes, Chloroprene rubber). In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves. Page 2 of 6

3 Safety Data Sheet according to Regulation (EU) No. 107/2006 Eye protection: Skin protection: Environmental exposure controls: Suitable eye protection: Goggles. German Industry Norms (DIN) / European Norms (EN): EN 166 For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes). Refer to chapter 7. No further action is necessary.. Physical and chemical properties General information Physical state: Colour: Odour: liquid yellowbrown characteristic Important health, safety and environmental information ph-value: 6,5-7,5 Test method Changes in the physical state Melting point: - 60 C Flash point: > 100 C DIN Density (at 20 C): 1,20 g/cm³ Water solubility: insoluble Solubility in other solvents: Soluble in: hydrocarbons, aromatic. hydrocarbons, chlorinated Viscosity / dynamic: mpa s (at 25 C) 10. Stability and reactivity Conditions to avoid: Materials to avoid: Hazardous decomposition products: Refer to chapter 7. No further action is necessary. Alkalis (alkalis), concentrated. acid, concentrated. Oxidizing agents, strong. Sulphur dioxide. Hydrogen sulphide (H2S). Formaldehyde. mercaptan. 11. Toxicological information Acute toxicity: Corrosive and irritant effects: Sensitising effects: Acute toxicity, oral - LD50: > 5000 mg/kg (Rat.) Acute toxicity, dermal - LD50: > 2000 mg/kg (Rabbit.) Irritant effect on the skin: irritant. Irritant effect on the eye: irritant. May cause sensitization in susceptible people. 12. Ecological information Ecotoxicity: Persistence and degradability: No data available Product is biodegradable with difficulty. 13. Disposal considerations Advice on disposal: Waste disposal according to official state regulations. Cleaned containers may be recycled. Page 3 of 6

4 Safety Data Sheet according to Regulation (EU) No. 107/2006 Waste disposal number of waste from residues/unused products: WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVES, SEALANTS AND PRINTING INKS; wastes from MFSU of adhesives and sealants (including waterproofing products); waste adhesives and sealants containing organic solvents or other dangerous substances Classified as hazardous waste. : WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVES, SEALANTS AND PRINTING INKS; wastes from MFSU of adhesives and sealants (including waterproofing products); waste adhesives and sealants containing organic solvents or other dangerous substances Classified as hazardous waste. Waste disposal number of contaminated packaging: WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVES, SEALANTS AND PRINTING INKS; wastes from MFSU of adhesives and sealants (including waterproofing products); waste adhesives and sealants containing organic solvents or other dangerous substances Classified as hazardous waste. 14. Transport information Land transport (ADR/RID) UN number: ADR/RID class: Classification code: Warning plate Hazard-no.: Hazard label: ADR/RID packing group: Limited quantity: Other applicable information (land transport): M6 0 LQ7 LIQUID, N.O.S. (Liquid polysulphide polymer with epoxy end groups) : : 3 : E Inland waterways transport UN number: ADNR class: Classification code: M6 Hazard label: Packing group: Limited quantity: LQ7 Page 4 of 6

5 Safety Data Sheet according to Regulation (EU) No. 107/2006 Other applicable information (inland waterways transport): LIQUID, N.O.S. (Liquid polysulphide polymer with epoxy end groups) : Marine transport UN number: IMDG code: Marine pollutant: Hazard label: IMDG packing group: EmS: Limited quantity: Other applicable information (marine transport): YES F-A, S-F 5 L LIQUID, N.O.S. (LIQUID POLYSULPHIDE POLYMER WITH EPOXY END GROUPS) : 274, 0, 44 Air transport UN/ID number: ICAO/IATA-DGR: Hazard label: ICAO packing group: Limited quantity Passenger: IATA-packing instructions - Passenger: IATA-max. quantity - Passenger: IATA-packing instructions - Cargo: IATA-max. quantity - Cargo: Other applicable information (air transport): 30 kg G L L LIQUID, N.O.S. (LIQUID POLYSULPHIDE POLYMER WITH EPOXY END GROUPS) : Y14 : A7 15. Regulatory information Labelling Indication of danger: Xi - Irritant; N - Dangerous for the environment Xi - Irritant N - Dangerous for the environment Hazardous component(s) to be indicated on label: R phrases: Liquid polysulphide polymer with epoxy end groups 36/38 Irritating to eyes and skin. 43 May cause sensitization by skin contact. 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic Page 5 of 6

6 Safety Data Sheet according to Regulation (EU) No. 107/2006 S phrases: Special labelling for certain preparations: Additional advice on labelling: EU regulatory information Additional information environment. 24 Avoid contact with skin. 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 37 Wear suitable gloves. 57 Use appropriate containment to avoid enviromental contamination. 60 This material and its container must be disposed of as hazardous waste. 61 Avoid release to the environment. Refer to special instructions / Safety data sheets. Contains Liquid polysulphide polymer with epoxy end groups. May produce an allergic reaction. Product is classified and labelled in accordance with EC regulations or the corresponding national laws. Contains epoxy containing compounds. Observe information supplied by manufacturer. National regulatory information 16. Other information Full text of R-phrases referred to under sections 2 and 3: Further Information: 36/38 Irritating to eyes and skin. 43 May cause sensitization by skin contact. 51 Toxic to aquatic organisms. 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 53 May cause long-term adverse effects in the aquatic environment. The information is based on present level of our knowledge. It does not, however, give assurances of product properties and establishes no contract legal rights. The receiver of our product is singulary responsible for adhering to existing laws and regulations. Page 6 of 6