SAFETY DATA SHEET PINNACLE GROUT LINE IMPREGNATOR

Transcription

1 Section: 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable. Recommended use : Floor care product Restrictions on use : Reserved for industrial and professional use. Product dilution information : Product is sold ready to use. Company : Ecolab Co. 515 Tomken Road Mississauga, Ontario Canada L4W 2X Emergency health information : (US/Canada), (outside US) Issuing date : 5/3/218 Section: 2. HAZARDS IDENTIFICATION GHS Classification Not a hazardous substance or mixture. GHS Label element Precautionary Statements Other hazards : Prevention: Wash hands thoroughly after handling. Response: Get medical advice/ attention if you feel unwell. Storage: Store in accordance with local regulations. Section: 3. COMPOSITION/INFORMATION ON INGREDIENTS Pure substance/mixture : Mixture Chemical Name CAS-No. Concentration: (%) Proprietary Polymer Proprietary Ingredient 1-5 Section: 4. FIRST AID MEASURES In case of eye contact In case of skin contact If swallowed If inhaled Protection of first-aiders Notes to physician : Rinse with plenty of water. : Rinse with plenty of water. : Rinse mouth. Get medical attention if symptoms occur. : Get medical attention if symptoms occur. : No special precautions are necessary for first aid responders. : No specific measures identified / 7

2 Most important symptoms and effects, both acute and delayed : See Section 11 for more detailed information on health effects and symptoms. Section: 5. FIREFIGHTING MEASURES Suitable extinguishing media Unsuitable extinguishing media Specific hazards during firefighting Hazardous combustion products Special protective equipment for firefighters Specific extinguishing methods Risk of explosion. : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. : Not flammable or combustible. : Decomposition products may include the following materials: Carbon oxides : Use personal protective equipment. : Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. : Not available. Section: 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Environmental precautions Methods and materials for containment and cleaning up : Refer to protective measures listed in sections 7 and 8. : No special environmental precautions required. : Stop leak if safe to do so. Contain spillage, and then collect with noncombustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Flush away traces with water. For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Section: 7. HANDLING AND STORAGE Advice on safe handling : Wash hands after handling. For personal protection see section 8. Conditions for safe storage : Keep out of reach of children. Store in suitable labeled containers. Storage temperature : -5 C to 5 C Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Contains no substances with occupational exposure limit values. Engineering measures : Good general ventilation should be sufficient to control worker / 7

3 Personal protective equipment exposure to airborne contaminants. Eye protection Hand protection Skin protection Respiratory protection Hygiene measures : No special protective equipment required. : No special protective equipment required. : No special protective equipment required. : No personal respiratory protective equipment normally required. : Wash hands before breaks and immediately after handling the product. Section: 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Colour Odour : liquid : amber : alcohol-like ph : , (1 %) Flash point Odour Threshold Melting point/freezing point Initial boiling point and boiling range Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit Vapour pressure Relative vapour density : Not applicable. : 1 C Relative density : Water solubility Solubility in other solvents Partition coefficient: n- octanol/water Auto-ignition temperature Thermal decomposition Viscosity, kinematic Explosive properties Oxidizing properties Molecular weight VOC : soluble Section: 1. STABILITY AND REACTIVITY / 7

4 Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products : Stable under normal conditions. : No dangerous reaction known under conditions of normal use. : Decomposition products may include the following materials: Carbon oxides Section: 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure : Inhalation, Eye contact, Skin contact Potential Health Effects Eyes Skin Ingestion Inhalation Chronic Exposure Experience with human exposure Eye contact Skin contact Ingestion Inhalation Toxicity Product Acute oral toxicity Acute inhalation toxicity Acute dermal toxicity Skin corrosion/irritation Serious eye damage/eye irritation Respiratory or skin sensitization Carcinogenicity Reproductive effects Germ cell mutagenicity : Acute toxicity estimate : > 5, mg/kg : 4 h Acute toxicity estimate : > 1 mg/l Test atmosphere: dust/mist / 7

5 Teratogenicity STOT - single exposure STOT - repeated exposure Aspiration toxicity Section: 12. ECOLOGICAL INFORMATION Ecotoxicity Environmental Effects Product Toxicity to fish Toxicity to daphnia and other aquatic invertebrates Toxicity to algae Components Toxicity to daphnia and other aquatic invertebrates : This product has no known ecotoxicological effects. : Proprietary Polymer 48 h EC5 Daphnia magna (Water flea): > 12 mg/l Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Section: 13. DISPOSAL CONSIDERATIONS Disposal methods Disposal considerations : Diluted product can be flushed to sanitary sewer. : Dispose of in accordance with local, state, and federal regulations. Section: 14. TRANSPORT INFORMATION The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are in compliance with the selected mode of transport. Land transport (TDG) Not dangerous goods Sea transport (IMDG/IMO) Not dangerous goods Section: 15. REGULATORY INFORMATION / 7

6 Health Instability This product has been classified according to the hazard criteria of the HPR and the SDS contains all of the information required by the HPR. The components of this product are reported in the following inventories: United States TSCA Inventory : On the inventory, or in compliance with the inventory Canadian Domestic Substances List (DSL) : All components of this product are on the Canadian DSL. Australia. Industrial Chemical (Notification and Assessment) Act : New Zealand. Inventory of Chemicals (NZIoC), as published by ERMA New Zealand : Japan. ENCS - Existing and New Chemical Substances Inventory : Korea. Korean Existing Chemicals Inventory (KECI) : Philippines Inventory of Chemicals and Chemical Substances (PICCS) : This product and/or component(s) are exempt or excluded from the Philippines Inventory of Chemicals and Chemical Substances (PICCS) under the Republic Act 6969 (RA 6969). China Inventory of Existing Chemical Substances : On the inventory, or in compliance with the inventory Taiwan Chemical Substance Inventory : Section: 16. OTHER INFORMATION NFPA: Flammability HMIS III: HEALTH FLAMMABILITY PHYSICAL HAZARD Special hazard. = not significant, 1 =Slight, 2 = Moderate, 3 = High 4 = Extreme, * = Chronic Issuing date : 5/3/218 Version : 1.1 Prepared by : Regulatory Affairs REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by a bar in the left-hand margin of the SDS / 7

7 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text / 7