Sodium Hydroxide, Pellet, ACS

Transcription

1 Safety Data Sheet Sodium Hydroxide, Pellet, ACS 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Sodium Hydroxide, Pellet, ACS Synonyms/Generic Names: Caustic Soda Product Number: 5095 Product Use: Industrial, Manufacturing or Laboratory use Manufacturer: Columbus Chemical Industries, Inc. N4335 Temkin Rd. Columbus, WI For More Information Call: (Monday-Friday 8:00-4:30) In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week) 2. HAZARDS IDENTIFICATION OSHA Hazards: Corrosive Target Organs: None Signal Word: Danger Pictograms: GHS Classification: corrosion Category 1 Serious eye damage Category 1 Acute aquatic toxicity Category 3 GHS Label Elements, including precautionary statements: Hazard Statements: H314 Causes severe skin burns and eye damage. H402 Harmful to aquatic life. Page 1 of 6

2 Precautionary Statements: P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/ physician. Potential Health Effects Causes eye irritation. Inhalation May be harmful if inhaled. Causes respiratory tract irritation. May be harmful if absorbed through skin. Causes skin irritation. Ingestion May be harmful if swallowed. NFPA Ratings Health 3 Flammability 0 Reactivity 1 Specific hazard HMIS Ratings Health 3 Fire 0 Reactivity 3 Personal J 3. COMPOSITION/INFORMATION ON INGREDIENTS Component Weight % CAS # EINECS# / ELINCS# Formula Molecular Weight Sodium Hydroxide NaOH g/mol 4. FIRST-AID MEASURES Inhalation Ingestion In case of eye contact, rinse with plenty of water and seek medical attention immediately. Move casualty to fresh air and keep at rest. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention immediately. Immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and wash using soap. Get medical attention immediately. Do Not Induce Vomiting! Never give anything by mouth to an unconscious person. If conscious, wash out mouth with water. Get medical attention immediately. 5. FIRE-FIGHTING MEASURES Suitable (and unsuitable) extinguishing media Special protective equipment and precautions for firefighters Specific hazards arising from the chemical Product is not flammable. Use appropriate media for adjacent fire. Cool containers with water. Wear self-contained, approved breathing apparatus and full protective clothing, including eye protection and boots. Emits toxic fumes (sodium oxides) under fire conditions. (See also Stability and Reactivity section). 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Environmental precautions See section 8 for recommendations on the use of personal protective equipment. Prevent spillage from entering drains. Any release to the environment may be subject to federal/national or local reporting requirements. Page 2 of 6

3 Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and place in suitable, closed containers for disposal. Clean surfaces thoroughly with water to remove residual contamination. Dispose of all waste and cleanup materials in accordance with regulations. 7. HANDLING AND STORAGE Precautions for safe handling See section 8 for recommendations on the use of personal protective equipment. Use with adequate ventilation. Wash thoroughly after using. Keep container closed when not in use. Avoid formation of dusts. Conditions for safe storage, including any incompatibilities Store in cool, dry well ventilated area. Keep away from incompatible materials (see section 10 for incompatibilities). 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Occupational exposure controls: Component Exposure Limits Basis Entity Sodium Hydroxide 2 mg/m 3 CEIL ACGIH 2 mg/m 3 PEL OSHA 2 mg/m 3 CEIL NIOSH TWA: Time Weighted Average over 8 hours of work. TLV: Threshold Limit Value over 8 hours of work. REL: Recommended Exposure Limit PEL: Permissible Exposure Limit STEL: Short Term Exposure Limit during x minutes. IDLH: Immediately Dangerous to Life or Health WEEL: Workplace Environmental Exposure Levels CEIL: Ceiling Personal Protection Wear chemical safety glasses or goggles. Inhalation Provide local exhaust, preferably mechanical. If exposure levels are excessive, use an approved respirator. Wear nitrile or rubber gloves, apron or lab coat. Other Other Recommendations Provide eyewash stations, quick-drench showers and washing facilities accessible to areas of use and handling. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance (physical state, color, etc.) Odor Odor threshold ph Melting point/freezing point C (613.4 F) Initial boiling point and boiling range 1388 C ( F) Page 3 of 6

4 Flash point Not Flammable Evaporation rate Flammability (solid, gas) Not Flammable Upper/lower flammability or explosive limit Not Explosive Vapor pressure < 24 hpa (< 18 mmhg) at 20 C (68 F) 4 hpa (3 mmhg) at 37 C (99 F) Vapor density 1.38 (Air = 1.0) Density 2.13 (Water = 1) Solubility (ies) Easily soluble in cold water. Partition coefficient: n-octanol/water Auto-ignition temperature Decomposition temperature 10. STABILITY AND REACTIVITY Chemical Stability Possibility of Hazardous Reactions Conditions to Avoid Incompatible Materials Hazardous Decomposition Products Stable Will not occur. Heat is evolved when solid material is dissolved in water, therefore cold water and caution must be used for this process. Strong oxidizing agents, strong acids, organic materials. Sodium oxides. 11. TOXICOLOGICAL INFORMATION Acute Toxicity Respiratory Ingestion Carcinogenicity IARC ACGIH NTP OSHA as probable, possible or confirmed human carcinogen by IARC. as a carcinogen or potential carcinogen by ACGIH. as a known or anticipated carcinogen by NTP. as a carcinogen or potential carcinogen by OSHA. Signs & Symptoms of Exposure Irritation, redness, itchiness. Irritation, redness, watering eyes, itchiness. Respiratory Irritation, coughing, wheezing. Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract Ingestion Irritation, nausea, vomiting, diarrhea. Chronic Toxicity Teratogenicity Mutagenicity Embryotoxicity Specific Target Organ Toxicity Reproductive Toxicity Respiratory/ Sensitization Page 4 of 6

5 12. ECOLOGICAL INFORMATION Ecotoxicity Aquatic Vertebrate Aquatic Invertebrate Terrestrial LC50 - Gambusia affinis (Mosquito fish) mg/l - 96 h Immobilization EC50 - Daphnia mg/l - 48 h Persistence and Degradability Bioaccumulative Potential Mobility in Soil PBT and vpvb Assessment Other Adverse Effects Harmful to aquatic life. 13. DISPOSAL CONSIDERATIONS Waste Residues Product Containers Users should review their operations in terms of the applicable federal/national or local regulations and consult with appropriate regulatory agencies if necessary before disposing of waste product container. Users should review their operations in terms of the applicable federal/national or local regulations and consult with appropriate regulatory agencies if necessary before disposing of waste product container. The information offered in section 13 is for the product as shipped. Use and/or alterations to the product may significantly change the characteristics of the material and alter the waste classification and proper disposal methods. 14. TRANSPORTATION INFORMATION US DOT TDG IMDG Marine Pollutant IATA/ICAO No 15. REGULATORY INFORMATION TSCA Inventory Status DSCL (EEC) California Proposition 65 SARA 302 SARA 304 SARA 311 SARA 312 SARA 313 WHMIS Canada All ingredients are listed on the TSCA inventory. All ingredients are listed on the DSCL inventory. Sodium hydroxide Sodium hydroxide CLASS E: Corrosive solid. Page 5 of 6

6 16. OTHER INFORMATION Revision Date Revision Disclaimer: Columbus Chemical Industries, Inc. ( Columbus ) believes that the information herein is factual but is not intended to be all inclusive. The information relates only to the specific material designated and does not relate to its use in combination with other materials or its use as to any particular process. Because safety standards and regulations are subject to change and because Columbus has no continuing control over the material, those handling, storing or using the material should satisfy themselves that they have current information regarding the particular way the material is handled, stored or used and that the same is done in accordance with federal, state and local law. COLUMBUS MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING (WITHOUT LIMITATION) WARRANTIES WITH RESPECT TO THE COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED HEREIN OR WITH RESPECT TO FITNESS FOR ANY PARTICULAR USE. Page 6 of 6